5-methyl-pyrrolidinone chitosan films as carriers for buccal administration of proteins

Oromucosal delivery of macromolecules: Challenges and recent developments to improve bioavailability

Owing to their biological diversity, high potency, good tolerability, low immunogenicity, site-specific activity, and great efficacy, macromolecular drugs (i.e., proteins and peptides, antibodies, hormones, nucleic acids, vaccines, etc.) are extensively used as diagnostics, prophylactics, and therapeutics in various diseases. To overcome drawbacks associated with parenteral (invasive) delivery of macromolecules as well as to preserve their therapeutic integrity, oromucosal route (sublingual and buccal) has been proven efficient alternate port of delivery. This review aims to summarize challenges associated with oromucosal route and overtime developments in conventional delivery systems with special emphasis on most recent delivery strategies. Over the past few decades, significant efforts have been made for improving the oromucosal absorption of macromolecules by employing chemical penetration enhancers (CPE), enzyme inhibitors, chemical modification of drug structure (i.e., lipidation, PEGylation, etc.), and mucoadhesive materials in the form of buccal tablets, films (or patches), sprays, fast disintegrating tablets, and microneedles. Adaptation of adjunct strategies (e.g., iontophoresis in conjunction with CPE) has shown significant improvement in oromucosal absorption of macromolecules; however, these approaches were also associated with many drawbacks. To overcome these shortcomings and to further improve therapeutic outcomes, specialized delivery devices called "hybrid nanosystems" have been designed in recent times. This newer intervention showed promising potential for promoting oromucosal absorption and absolute bioavailability of macromolecules along with improved thermostability (cold chain free storage), enabling self-administration, site-specific activity, improving therapeutic efficacy and patient compliance. We anticipate that tailoring of hybrid nanosystems to clinical trials as well as establishing their short- and long-term safety profile would substantiate their therapeutic value as pharmaceutical devices for oromucosal delivery of macromolecules.

Fabrication and analysis of chitosan oligosaccharide based mucoadhesive patch for oromucosal drug delivery

OBJECTIVE

Fabrication and analyses of mucoadhesive patches made from chitosan oligosaccharide for the purpose of oromucosal drug delivery.

SIGNIFICANCE

The mucosal epithelium in the oral cavity, consisting of buccal and sublingual epithelium, has gained significant attention in the last decade as an alternative anatomical site for systemic drug delivery that could potentially minimize the challenges of solid oral dosage and parenteral delivery. In this study, we have fabricated and tested drug-loaded chitosan oligosaccharide-based patches for the oromucosal drug delivery.

METHODS

The chitosan oligosaccharide (with and without alginate) based patches were fabricated using the conventional solvent casting method and were analyzed for their swelling capacity, hydrophilicity, anti-cancer activity, in vitro drug release, and in vivo drug release activity. The in-house developed artificial saliva was used for the swelling study.

RESULTS

Alginate-containing patches showed lesser swelling ability compared to the bare chitosan oligosaccharide-based patches. The former was also found to be more hydrophobic compared to the latter one. Both the unloaded patches restricted the growth of epithelial cancer cells indicating their anti-cancer behavior. In vitro drug release indicated a super case II release pattern while in vivo study demonstrated the release of drug from the patch into the plasma indicating the purpose of the fabricated patch.

CONCLUSIONS

The chitosan oligosaccharide-based mucoadhesive hydrogel patch fabricated in this study can be highly suitable for possible translational purposes.

From Static to Dynamic: A Review on the Role of Mucus Heterogeneity in Particle and Microbial Transport

Mucus layers (McLs) are on the front line of the human defense system that protect us from foreign abiotic/biotic particles (e.g., airborne virus SARS-CoV-2) and lubricates our organs. Recently, the impact of McLs on human health (e.g., nutrient absorption and drug delivery) and diseases (e.g., infections and cancers) has been studied extensively, yet their mechanisms are still not fully understood due to their high variety among organs and individuals. We characterize these variances as the heterogeneity of McLs, which lies in the thickness, composition, and physiology, making the systematic research on the roles of McLs in human health and diseases very challenging. To advance mucosal organoids and develop effective drug delivery systems, a comprehensive understanding of McLs' heterogeneity and how it impacts mucus physiology is urgently needed. When the role of airway mucus in the penetration and transmission of coronavirus (CoV) is considered, this understanding may also enable a better explanation and prediction of the CoV's behavior. Hence, in this Review, we summarize the variances of McLs among organs, health conditions, and experimental settings as well as recent advances in experimental measurements, data analysis, and model development for simulations.

Hyaluronic Acid-Based Nanoparticles for Protein Delivery: Systematic Examination of Microfluidic Production Conditions

Hyaluronic acid-based nanoparticles (HA NPs) can be used to deliver a protein cargo to cells overexpressing HA receptors such as CD44 since they combine the low toxicity of the carrier and the retention of the protein integrity with the receptor-mediated internalization. HA properties play a crucial but sometimes unclear role in managing the formation and stability of the meshwork, cell interactions, and ultimately the protein entrapment efficacy. Nowadays, microfluidic is an innovative technology that allows to overcome limits linked to the NPs production, guaranteeing reproducibility and control of individual batches. Taking advantage of this technique, in this research work, the role of HA weight average molecular weight (Mw) in NPs formation inside a microfluidic device has been specifically faced. Based on the relationship between polymer Mw and solution viscosity, a methodological approach has been proposed to ensure critical quality attributes (size of 200 nm, PDI ≤ 0.3) to NPs made by HA with different Mw (280, 540, 710 and 820 kDa). The feasibility of the protein encapsulation was demonstrated by using Myoglobin, as a model neutral protein, with an encapsulation efficiency always higher than 50%. Lastly, all NPs samples were successfully internalized by CD44-expressing cells.

Sublingual protein delivery by a mucoadhesive patch made of natural polymers

The sublingual mucosa is an appealing route for drug administration. However, in the context of increased use of therapeutic proteins, development of protein delivery systems that will protect the protein bioactivity is needed. As proteins are fragile and complex molecules, current sublingual formulations of proteins are in liquid dosage. Yet, protein dilution and short residence time at the sublingual mucosa are the main barriers for the control of the dose that is delivered. In this work, a simple delivery scaffold based on the assembly of two polysaccharides, chitosan and hyaluronic acid, is presented. The natural polymers were assembled by the Layer-by-Layer methodology to produce a mucoadhesive and oro-dispersible freestanding membrane, shown to be innocuous for epithelial human cells. The functionalization of the membrane with proteins led to the production of a bioactive patch with efficient loading and release of proteins, and suitable mechanical properties for manipulation. Sublingual administration of the patch in mouse evidenced the absence of inflammation and an extended time of contact between the model protein ovalbumin and the mucosa compared to liquid formulation. The delivery of fluorescent ovalbumin in mouse sublingual mucosa demonstrated the penetration of the protein in the epithelium 10 min after the patch administration. Moreover, a migration assay with a chemokine incorporated into the patch showed no decrease in bioactivity of the loaded protein after enzymatic release. This study therefore provides a promising strategy to develop a sublingual protein delivery system. STATEMENT OF SIGNIFICANCE: Although the oral route is largely used for drug delivery, it has limitations for the delivery of proteins that can be degraded by pH or gastric enzymes. The sublingual route therefore appears as an interesting approach for protein administration. In this work, a simple delivery scaffold is presented based on the assembly of two polysaccharides by the Layer-by-Layer methodology to produce a mucoadhesive patch. The produced patch allowed efficient loading and release of proteins, as well as protection of their bioactivity. An extended time of contact between the protein and the mucosa compared to liquid formulation was highlighted in mouse model. This study provides a promising strategy to develop a sublingual protein delivery system.

Characterization of Orodispersible Films: An Overview of Methods and Introduction to a New Disintegration Test Apparatus Using LDR - LED Sensors

Orodispersible Film (ODF) is a promising and progressive dosage form that offers exceptional drug delivery benefits to patients. Indeed, they are the most transformational alternatives to traditional/conventional dosage forms such as tablets and capsules. ODFs are portable and highly comfortable for self-administration by patients with swallowing problems. The key to gain end-user acceptance is to have an ODF with outstanding quality. Poor quality may lead to choking or spitting, accordingly leading to a lack of compliance. It is vital to employ suitable experimental methodologies that facilitate characterization or determination of the quality of ODF. Nonetheless, there are no standard techniques prescribed in official compendia of any country. But, there is a consensus in the thin-film research community about the characterization techniques that one relies on deciding the quality of an ODF. We review various experimental techniques and highlight its importance in determining the performance and quality of an ODF. We provide a relatively novel and inventive disintegration test apparatus, which works using 'Light Dependent Resistor (LDR) and Light Emitting Diode (LED) sensors' for clear and accurate determination of start and end disintegration time of an ODF.

Effect of Genotype and Sex of the Host on the Bioavailability of Novel Albendazole Microcrystals Based on Chitosan and Cellulose Derivatives

Albendazole (ABZ), an anthelmintic compound widely used in the treatment of systemic nematode infections, is included in the list of class II drugs based on the Biopharmaceutical Classification System. ABZ has limited effectiveness due to its poor water solubility and consequent low bioavailability. Bioavailability of novel ABZ microcrystals based on hydroxyethylcellulose (S4A) or chitosan (S10A) was studied in male and female mice of two inbred lines, from the murine CBi-IGE model of trichinellosis, differing in susceptibility to this parasitosis (line CBi/L, resistant; line CBi+, susceptible). ABZ microcrystals were administered orally, and albendazole sulfoxide (ABZSO) was quantified in plasma by high-performance liquid chromatography. Mice given the microcrystals showed a significant increase in maximum plasmatic concentration (C_max) compared with those receiving pure ABZ (P < 0.01). In both genotypes, males and females given S4A had higher C_max than those receiving S10A (P < 0.05). CBi/L showed a greater C_max than CBi+ (significantly different only in females treated with S4A (P = 0.001)). CBi/L females attained a higher C_max than males (P < 0.05). No sex effect was observed for this variable in CBi+ (P > 0.05). The results of the pharmacokinetic analysis indicate that the microcrystalline formulations optimize ABZ bioavailability, both in males and females, S4A being the best system in CBi/L mice and S10A in CBi+. In summary, the microcrystals increased ABZ bioavailability, and under the conditions of this investigation, both host genotype and sex influenced the pharmacokinetic parameters measured.

Naringin-loaded polymeric micelles as buccal tablets: formulation, characterization, in vitro release, cytotoxicity and histopathology studies

Naringin (NG) has been proved to have numerous notable biological effects, including anti-inflammatory effect, anti-cancer effect, and anti-ulcer effect, yet there are no clinical preparations of naringin due to its poor solubility and low dissolution rate after oral administration. In this study, in order to overcome these problems, NG was encapsulated into MPEG-PCL micelles (NGMs) by using a thin-film hydration method. NMGs were in a typical core-shell structure, with a mall particle size (23.95 ± 0.51 nm), high drug loading, and encapsulation efficiency. In vitro release of NGMs indicated that the dissolution of NG was increased after being encapsulated in the micelles. NGMs were nontoxic in the cytotoxicity and histopathology studies. Furthermore, when the freeze-dried NGMs were compressed into buccal tablets (NGBTs) by direct compression, the release speed of NG under simulated oral cavity condition from NGBTs was higher than the control tablets, with the accumulated dissolution at 93.13% in 8 hours. In conclusion, NGMs and NGBTs represent a promising drug delivery system for NG, which has the potential to improve the current treatment of oral diseases.

Formulation, Characterization, and Optimization of Captopril Fast-Dissolving Oral Films

This work aimed to using optimization study to formulate a patient-friendly captopril fast-dissolving oral film with satisfactory disintegration time. Films were made with pullulan and hydroxypropyl methyl cellulose (HPMC) by using the solvent-casting method. Cellulose nanofiber (CNF) was used as a compatibilizer and glycerine was used as a plasticizer. In order to find an optimum formulation, a response surface methodology and a central composite design were employed. The concentration percentages of pullulan and glycerine were considered to be the design factors. Disintegration time, tensile strength, percent elongation at break, and folding endurance were considered to be the responses. The results showed that CNF improved the compatibility and tensile strength of the pullulan and HPMC blend. Also, the rigid nature of CNF reduced the film elongation but the addition of glycerine improved its flexibility. All formulations showed an acceptable uniformity content and dissolution rate. Complete dissolution for all formulations occurred within 2 min. Films with 26% pullulan, 74% HPMC, 1% CNF, and 5% glycerine were reported to be optimum formulations for captopril fast-dissolving oral films, with 95% confidence levels. The in vivo comparison of optimized formulation with a conventional captopril sublingual tablet exhibited significant increase in AUC (~ 62%) and C_max (~ 52%) and a major decrease in T_max (~ 33%). The overall results showed that the captopril FDF is a promising candidate for enhanced in vivo orotransmucosal absorption.

Tuning the Hydrophilic/Hydrophobic Balance to Control the Structure of Chitosan Films and Their Protein Release Behavior

The control over the crystallinity of chitosan and chitosan/ovalbumin films can be achieved via an appropriate balance of the hydrophilic/hydrophobic interactions during the film formation process, which then controls the release kinetics of ovalbumin. Chitosan films were prepared by solvent casting. The presence of the anhydrous allomorph can be viewed as a probe of the hydrophobic conditions at the neutralization step. The semicrystalline structure, the swelling behavior of the films, the protein/chitosan interactions, and the release behavior of the films were impacted by the DA and the film processing parameters. At low DAs, the chitosan films neutralized in the solid state corresponded to the most hydrophobic environment, inducing the crystallization of the anhydrous allomorph with and without protein. The most hydrophilic conditions, leading to the hydrated allomorph, corresponded to non-neutralized films for the highest DAs. For the non-neutralized chitosan acetate (amorphous) films, the swelling increased when the DA decreased, whereas for the neutralized chitosan films, the swelling decreased. The in vitro release of ovalbumin (model protein) from chitosan films was controlled by their swelling behavior. For fast swelling films (DA = 45%), a burst effect was observed. On the contrary, a lag time was evidenced for DA = 2.5% with a limited release of the protein. Furthermore, by blending chitosans (DA = 2.5% and 45%), the release behavior was improved by reducing the burst effect and the lag time. The secondary structure of ovalbumin was partially maintained in the solid state, and the ovalbumin was released under its native form.

Buccal Dosage Forms: General Considerations for Pediatric Patients

The development of an appropriate dosage form for pediatric patients needs to take into account several aspects, since adult drug biodistribution differs from that of pediatrics. In recent years, buccal administration has become an attractive route, having different dosage forms under development including tablets, lozenges, films, and solutions among others. Furthermore, the buccal epithelium can allow quick access to systemic circulation, which could be used for a rapid onset of action. For pediatric patients, dosage forms to be placed in the oral cavity have higher requirements for palatability to increase acceptance and therapy compliance. Therefore, an understanding of the excipients required and their functions and properties needs to be particularly addressed. This review is focused on the differences and requirements relevant to buccal administration for pediatric patients (compared to adults) and how novel dosage forms can be less invasive and more acceptable alternatives.

Overview and Future Potential of Buccal Mucoadhesive Films as Drug Delivery Systems for Biologics

The main route of administration for drug products is the oral route, yet biologics are initially developed as injectables due to their limited stability through the gastrointestinal tract and solubility issues. In order to avoid injections, a myriad of investigations on alternative administration routes that can bypass enzymatic degradation and the first-pass effect are found in the literature. As an alternative site for biologics absorption, the buccal route presents with a number of advantages. The buccal mucosa is a barrier, providing protection to underlying tissue, but is more permeable than other alternative routes such as the skin. Buccal films are polymeric matrices designed to be mucoadhesive properties and usually formulated with permeability enhancers to improve bioavailability. Conventionally, buccal films for biologics are manufactured by solvent casting, yet recent developments have shown the potential of hot melt extrusion, and most recently ink jet printing as promising strategies. This review aims at depicting the field of biologics-loaded mucoadhesive films as buccal drug delivery systems. In light of the literature available, the buccal epithelium is a promising route for biologics administration, which is reflected in clinical trials currently in progress, looking forward to register and commercialize the first biologic product formulated as a buccal film.

Enhancing the buccal mucosal delivery of peptide and protein therapeutics

With continuing advances in biotechnology and genetic engineering, there has been a dramatic increase in the availability of new biomacromolecules, such as peptides and proteins that have the potential to ameliorate the symptoms of many poorly-treated diseases. Although most of these macromolecular therapeutics exhibit high potency, their large molecular mass, susceptibility to enzymatic degradation, immunogenicity and tendency to undergo aggregation, adsorption, and denaturation have limited their ability to be administered via the traditional oral route. As a result, alternative noninvasive routes have been investigated for the systemic delivery of these macromolecules, one of which is the buccal mucosa. The buccal mucosa offers a number of advantages over the oral route, making it attractive for the delivery of peptides and proteins. However, the buccal mucosa still exhibits some permeability-limiting properties, and therefore various methods have been explored to enhance the delivery of macromolecules via this route, including the use of chemical penetration enhancers, physical methods, particulate systems and mucoadhesive formulations. The incorporation of anti-aggregating agents in buccal formulations also appears to show promise in other mucosal delivery systems, but has not yet been considered for buccal mucosal drug delivery. This review provides an update on recent approaches that have shown promise in enhancing the buccal mucosal transport of macromolecules, with a major focus on proteins and peptides.