Pharmacokinetics of Long-Acting Aqueous Nano-/Microsuspensions After Intramuscular Administration in Different Animal Species and Humans-a Review

Patient-Centric Long-Acting Injectable and Implantable Platforms─An Industrial Perspective

The increasing focus on patient centricity in the pharmaceutical industry over the past decade and the changing healthcare landscape, driven by factors such as increased access to information, social media, and evolving patient demands, has necessitated a shift toward greater connectivity and understanding of patients' unique treatment needs. One pharmaceutical technology that has supported these efforts is long acting injectables (LAIs), which lower the administration frequency for the patient's provided convenience, better compliance, and hence better therapeutical treatment for the patients. Furthermore, patients with conditions like the human immunodeficiency virus and schizophrenia have positively expressed the desire for less frequent dosing, such as that obtained through LAI formulations. In this work, a comprehensive analysis of marketed LAIs across therapeutic classes and technologies is conducted. The analysis demonstrated an increasing number of new LAIs being brought to the market, recently most as aqueous suspensions and one as a solution, but many other technology platforms were applied as well, in particular, polymeric microspheres and in situ forming gels. The analysis across the technologies provided an insight into to the physicochemical properties the compounds had per technology class as well as knowledge of the excipients typically used within the individual formulation technology. The principle behind the formulation technologies was discussed with respect to the release mechanism, manufacturing approaches, and the possibility of defining predictive in vitro release methods to obtain in vitro in vivo correlations with an industrial angle. The gaps in the field are still numerous, including better systematic formulation and manufacturing investigations to get a better understanding of potential innovations, but also development of new polymers could facilitate the development of additional compounds. The biggest and most important gaps, however, seem to be the development of predictive in vitro dissolution methods utilizing pharmacopoeia described equipment to enable their use for product development and later in the product cycle for quality-based purposes.

Spiro-Azetidine Oxindoles as Long-Acting Injectables for Pre-Exposure Prophylaxis against Respiratory Syncytial Virus Infections

Respiratory syncytial virus (RSV) is a major cause of hospitalization in infants, the elderly, and immune-compromised patients. While a half-life extended monoclonal antibody and 2 vaccines have recently been approved for infants and the elderly, respectively, options to prevent disease in immune-compromised patients are still needed. Here, we describe spiro-azetidine oxindoles as small molecule RSV entry inhibitors displaying favorable potency, developability attributes, and long-acting PK when injected as an aqueous suspension, suggesting their potential to prevent complications following RSV infection over a period of 3 to 6 months with 1 or 2 long-acting intramuscular (IM) or subcutaneous (SC) injections in these immune-compromised patients.

Comparative study of acetalated-dextran microparticle fabrication methods for a clinically translatable subunit-based influenza vaccine

The most common influenza vaccines are inactivated viruses produced in chicken eggs, which is a time-consuming production method with variable efficacy due to mismatches of the vaccine strains to the dominant circulating strains. Subunit-based vaccines provide faster production times in comparison to the traditional egg-produced vaccines but often require the use of an adjuvant to elicit a highly protective immune response. However, the current FDA approved adjuvant for influenza vaccines (MF59) elicits a primarily helper T-cell type 2 (Th2)-biased humoral immune response. Adjuvants that can stimulate a Th1 cellular response are correlated to have more robust protection against influenza. The cyclic dinucleotide cGAMP has been shown to provide a potent Th1 response but requires the use of a delivery vehicle to best initiate its signalling pathway in the cytosol. Herein, acetalated dextran (Ace-DEX) was used as the polymer to fabricate microparticles (MPs) via double-emulsion, electrospray, and spray drying methods to encapsulate cGAMP. This study compared each fabrication method's ability to encapsulate and retain the hydrophilic adjuvant cGAMP. We compared their therapeutic efficacy to Addavax, an MF59-like adjuvant, and cGAMP Ace-DEX MPs provided a stronger Th1 response in vaccinated BALB/c mice. Furthermore, we compared Ace-DEX MPs to spray dried MPs composed from a commonly used polymer for drug delivery, poly(lactic-co-glycolic acid) (PLGA). We observed that all Ace-DEX MPs elicited similar humoral and cellular responses to the PLGA MPs. Overall, the results shown here indicate Ace-DEX can perform similarly to PLGA as a polymer for drug delivery and that spray drying can provide an efficient way to produce MPs to encapsulate cGAMP and stimulate the immune system.

A Bilayer Microarray Patch (MAP) for HIV Pre-Exposure Prophylaxis: The Role of MAP Designs and Formulation Composition in Enhancing Long-Acting Drug Delivery

Microarray patches (MAPs) have shown great potential for efficient and patient-friendly drug delivery through the skin; however, improving their delivery efficiency for long-acting drug release remains a significant challenge. This research provides an overview of novel strategies aimed at enhancing the efficiency of MAP delivery of micronized cabotegravir sodium (CAB Na) for HIV pre-exposure prophylaxis (PrEP). The refinement of microneedle design parameters, including needle length, shape, density, and arrangement, and the formulation properties, such as solubility, viscosity, polymer molecular weight, and stability, are crucial for improving penetration and release profiles. Additionally, a bilayer MAP optimization step was conducted by diluting the CAB Na polymeric mixture to localize the drug into the tips of the needles to enable rapid drug deposition into the skin following MAP application. Six MAP designs were analyzed and investigated with regard to delivery efficiency into the skin in ex vivo and in vivo studies. The improved MAP design and formulations were found to be robust and had more than 30% in vivo delivery efficiency, with plasma levels several-fold above the therapeutic concentration over a month. Repeated weekly dosing demonstrated the robustness of MAPs in delivering a consistent and sustained dose of CAB. In summary, CAB Na MAPs were able to deliver therapeutically relevant levels of drug.

Role of Modeling and Simulation in Preclinical and Clinical Long-Acting Injectable Drug Development

Innovations in the field of long-acting injectable drug development are increasingly being reported. More advanced in vitro and in vivo characterization can improve our understanding of the injection space and aid in describing the long-acting injectable (LAI) drug's behavior at the injection site more mechanistically. These innovations may enable unlocking the potential of employing a model-based framework in the LAI preclinical and clinical space. This review provides a brief overview of the LAI development process before delving deeper into the current status of modeling and simulation approaches in characterizing the preclinical and clinical LAI pharmacokinetics, focused on aqueous crystalline suspensions. A closer look is provided on in vitro release methods, available biopharmaceutical models and reported in vitro/in vivo correlations (IVIVCs) that may advance LAI drug development. The overview allows identifying the opportunities for use of model-informed drug development approaches and potential gaps where further research may be most warranted. Continued investment in improving our understanding of LAI PK across species through translational approaches may facilitate the future development of LAI drug products.

Optimization of O/W Emulsion Solvent Evaporation Method for Itraconazole Sustained Release Microspheres

Itraconazole, a commonly used antifungal drug in the clinic approved by U.S. Food and Drug Administration (FDA), has been gradually found to have anti-tumor, angiogenesis inhibition and other pharmacological activities. However, its poor water solubility and potential toxicity limited its clinical application. In order to improve the water solubility and reduce the side effects caused by the high concentration of itraconazole, a novel preparation method of itraconazole sustained release microspheres was established in this study. Firstly, five kinds of polylactic acid-glycolic acid (PLGA) microspheres loaded with itraconazole were prepared by oil/water (O/W) emulsion solvent evaporation and then characterized by infrared spectroscopy. Then the particle size and morphology of the microspheres were observed by scanning electron microscope (SEM) and transmission electron microscope (TEM). After that, the particle size distribution, drug loading rate, entrapment efficiency, and drug release experiments were evaluated. Our results showed the microspheres prepared in this study had uniform particle size distribution and good integrity. Further study found that the average drug loading of the five kinds of microspheres prepared with PLGA 7505, PLGA 7510, PLGA 7520, PLGA 5020 and PLGA 0020 were 16.88, 17.72, 16.72, 16.57, and 16.64%, respectively, and the encapsulation rate all reached about 100%. More surprisingly, the release experimental results showed that the microspheres prepared with PLGA 7520 did not show sudden release, showing good sustained release performance and high drug release rate. To sum up, this study optimized the preparation method of sustained-release microspheres without sudden release, which provides a new solution for the delivery of itraconazole in the clinic.