Modulation and optimization of drug release from uncoated low density porous carrier based delivery system

Immobilization and bioimprinting strategies to enhance the performance in organic medium of the metagenomic lipase LipC12

The present work evaluates the immobilization of LipC12 on different supports in tandem with bioimprinting technique, in order to improve its activity and stability in organic medium. Oleic acid was selected as the bioimprinting molecule. The immobilized LipC12 was applied in the synthesis of pentyl oleate by esterification reaction and in the production of fatty acids, mono, and diglycerides via hydrolysis of triacylglycerols, in n-heptane reaction media. For all immobilized lipase preparations, an increase in the conversion of oleic acid to pentyl oleate was observed when immobilization in tandem with bioimprinting treatment was carried out versus immobilization without bioimprinting. The highest conversions were achieved using LipC12 immobilized on hydrophobic supports. The reuse potential of the immobilized preparations was evaluated. The preparations were used in eight successive cycles of esterification reactions and the best results were obtained for LipC12 immobilized on Immobead 150 and chitosan. The activity for the hydrolysis of soybean oil was improved by bioimprinting treatment only for LipC12 immobilized on commercial polypropylene and Accurel MP-1000. LipC12 immobilized on hydrophilic supports or on Immobead150 could be used to hydrolyze tricaprylin to obtain diglycerides with a high proportion of 1,2-diglycerides in reaction times as short as 30 min.

Supramolecular cyclodextrin-based metal-organic frameworks as efficient carrier for anti-inflammatory drugs

Drug delivery systems have been used to reduce adverse effects and improve the efficacy of therapies. Drug carriers have been developed over the years, but they have limitations. γ-cyclodextrin-based metal-organic frameworks (γ-CD-MOF) have significant advantages due to their biocompatibility and environmental safety, besides crystallinity and porosity. Herein, γ-CD-MOFs were synthesised with different metals as nodes and investigated. Uniform mesoporous γ-CD-MOFs were obtained and showed an absence of toxicity in HepG2 and Caco-2 cells. The longer controlled release was verified for γ-CD-MOFs, with a maximum of 62% released in 12 h. An inflammation experiment was performed in mice and activity equivalent to the positive control was verified. γ-KCD-MOFs and γ-NaCD-MOFs reached activity after 6 h of administration, however this happened after 24 h in γ-FeCD-MOFs, being more effective than the positive control. Considering the ability for drug entrapment, easy preparation and controlled release, this class of material allows potential applications in drug delivery systems.

Physicochemical characterization of drug nanocarriers

Pharmaceutical design has enabled important advances in the prevention, treatment, and diagnosis of diseases. The use of nanotechnology to optimize the delivery of drugs and diagnostic molecules is increasingly receiving attention due to the enhanced efficiency provided by these systems. Understanding the structures of nanocarriers is crucial in elucidating their physical and chemical properties, which greatly influence their behavior in the body at both the molecular and systemic levels. This review was conducted to describe the principles and characteristics of techniques commonly used to elucidate the structures of nanocarriers, with consideration of their size, morphology, surface charge, porosity, crystalline arrangement, and phase. These techniques include X-ray diffraction, small-angle X-ray scattering, dynamic light scattering, zeta potential, polarized light microscopy, transmission electron microscopy, scanning electron microcopy, and porosimetry. Moreover, we describe some of the commonly used nanocarriers (liquid crystals, metal-organic frameworks, silica nanospheres, liposomes, solid lipid nanoparticles, and micelles) and the main aspects of their structures.

Magnetic-responsive microparticles with customized porosity for drug delivery

One step engineering of drug-loaded magnetic porous particles for controlled release and targeting.

In vitro, ex vivo and in silico mechanistic elucidation of the performance of an optimized porosity-controlled multi-elemental transbuccal system

PURPOSE

To elucidate the mechanisms of construction and performance of a porosity controlled, multi-elemental transbuccal system employing experimental and computational approaches.

METHODS

The production of the formulation was guided through a Box-Benkhen design employing homogenization coupled with lyophilization. The physicochemical and physicomechanical properties of the experimental design formulations were quantified with relevant analytical techniques. The influence of changes in porosity measures on the magnitude of these physical properties were explored mathematically. Furthermore, experimental outputs from the Box-Behnken design formulations were fitted into set limits and optimized using the response surface method. The optimized porosity-controlled formulation was subjected to mechanistic experimental and computational elucidations.

RESULTS

In general, the changes in magnitudes of studied porosity quantities had significant impact on formulation physicochemical and physicomechanical properties. The generation of an optimized formulation validated the stability and accuracy of the Box-Behnken experimental design. Experimental investigations revealed that the construction of this formulation is as a result of non-destructive physical interactions amongst its make-up compounds while its mechanism of performance is anchored mainly upon a gradual collapse of its ordered porous structure. Furthermore, the molecule mechanics simulations quantitatively predicted the molecular interactions inherent to multicomponent matrix formation and the mucoadhesion mechanism.

CONCLUSIONS

The fabrication and performance mechanisms of the porosity-controlled transbuccal system was successfully explored.

Dexamethasone-releasing cochlear implant coatings: application of artificial neural networks for modelling of formulation parameters and drug release profile

Objectives

Over the past few decades, mathematical modelling and simulation of drug delivery systems has been steadily gained interest as a focus for academic and industrial attention. Here, simulation of dexamethasone (DEX, a corticosteroid anti-inflammatory agent) release profile from drug-eluting cochlear implant coatings is reported using artificial neural networks.

Methods

The devices were fabricated as monolithic dispersions of the pharmaceutically active ingredient in a silicone rubber matrix. A two-phase exponential model was fitted on the experimentally obtained DEX release profiles. An artificial neural network (ANN) was trained to determine formulation parameters (i.e. DEX loading percentage, the devices surface area and their geometry) for a specific experimentally obtained drug release profile. In a reverse strategy, an ANN was trained for determining expected drug release profiles for the same set of formulation parameters.

Key findings

An algorithm was developed by combining the two previously developed ANNs in a serial manner, and this was successfully used for simulating the developed drug-eluting cochlear implant coatings. The models were validated by a leave-one-out method and performing new experiments.

Conclusions

The developed ANN algorithms were capable to bilaterally predict drug release profile for a known set of formulation parameters or find out the levels for input formulation parameters to obtain a desired DEX release profile.

Novel/conceptual floating pulsatile system using high internal phase emulsion based porous material intended for chronotherapy

The aim of the present study was to design a novel/conceptual delivery system using ibuprofen, anticipated for chronotherapy in arthritis with porous material to overcome the formulation limits (multiple steps, polymers, excipients) and to optimize drug loading for a desired release profile suitable for in vitro investigations. The objective of this delivery system lies in the availability of maximum drug amount for absorption in the wee hours as recommended. Drug loading using 3(2) factorial design on porous carrier, synthesized by high internal phase emulsion technique using styrene and divinylbenzene, was done via solvent evaporation using methanol and dichloromethane. The system was evaluated in vitro for drug loading, encapsulation efficiency, and surface characterization by scanning electron, atomic force microscopy, and customized drug release study. This study examined critical parameters such as solvent volume, drug amount, and solvent polarity on investigations related to drug adsorption and release mostly favoring low-polarity solvent dichloromethane. Overall release in all batches ranged 0.98-52% in acidic medium and 71-94% in basic medium. These results exhibit uniqueness in achieving the least drug release of 0.98%, an ideal one, without using any release modifiers, making it distinct from other approaches/technologies for time and controlled release and for chronotherapy.