Effect of experimental temperature on the permeation of model diffusants across porcine buccal mucosa

Candesartan exhibits low intrinsic permeation capacity and affects buccal tissue viability and integrity: An ex vivo study in porcine buccal mucosa

Candesartan is a nonpeptide angiotensin II receptor blocker that selectively binds to angiotensin II receptor subtype 1. It is administered orally in its ester form (candesartan cilexetil). However, its poor aqueous solubility results in its low bioavailability; therefore, other routes of administration must be explored. The buccal mucosa has been extensively studied as an alternative route for drug delivery as it improves the bioavailability of drugs administered via the peroral route. Porcine buccal mucosa has been widely used as an ex vivo model to study the permeability of various diffusants; however, studies on candesartan are limited. This study aimed to evaluate the ex vivo permeation profile of candesartan and its effects on the viability and integrity of porcine buccal mucosa. Initially, we evaluated the viability, integrity, and barrier function of the buccal tissue before performing permeability tests using freshly excised tissues or tissues after 12 h of resection. Here, three indicators were used: caffeine, β-estradiol, and FD-20 penetration; mucosal metabolic activity, as determined using MTT reduction assay; and haematoxylin and eosin staining. Our results indicated that the porcine buccal mucosa preserved its viability, integrity, and barrier function before the permeation assay, allowing the passage of molecules with a molecular mass of less than 20 kDa, such as caffeine, but not β-estradiol and FD-20. Furthermore, we analyzed the intrinsic capacity of candesartan to diffuse through the fresh porcine buccal mucosa under two pH conditions. The concentration of candesartan in the receptor chamber of Franz diffusion cell was quantified using ultra-high liquid chromatography. In the permeation assay, candesartan exhibited a low intrinsic permeation capacity that impacted the buccal tissue viability and integrity, suggesting that using the buccal mucosa as an alternative route of administration requires developing a pharmaceutical formulation that reduces the adverse effects on mucosa and increasing the buccal permeability of candesartan.

Canine Intestinal Organoids as a Novel In Vitro Model of Intestinal Drug Permeability: A Proof-of-Concept Study

A key component of efforts to identify the biological and drug-specific aspects contributing to therapeutic failure or unexpected exposure-associated toxicity is the study of drug-intestinal barrier interactions. While methods supporting such assessments are widely described for human therapeutics, relatively little information is available for similar evaluations in support of veterinary pharmaceuticals. There is, therefore, a critical need to develop novel approaches for evaluating drug-gut interactions in veterinary medicine. Three-dimensional (3D) organoids can address these difficulties in a reasonably affordable system that circumvents the need for more invasive in vivo assays in live animals. However, a first step in developing such systems is understanding organoid interactions in a 2D monolayer. Given the importance of orally administered medications for meeting the therapeutic need of companion animals, we demonstrate growth conditions under which canine-colonoid-derived intestinal epithelial cells survive, mature, and differentiate into confluent cell systems with high monolayer integrity. We further examine the applicability of this canine-colonoid-derived 2D model to assess the permeability of three structurally diverse, passively absorbed β-blockers (e.g., propranolol, metoprolol, and atenolol). Both the absorptive and secretive apparent permeability (P_app) of these drugs at two different pH conditions were evaluated in canine-colonoid-derived monolayers and compared with that of Caco-2 cells. This proof-of-concept study provides promising preliminary results with regard to the utility of canine-derived organoid monolayers for species-specific assessments of therapeutic drug passive permeability.

A method for evaluating drug penetration and absorption through isolated buccal mucosa with highly accuracy and reproducibility

The purpose of the project is to establish a standardized operation method of the in vitro permeability model to maximize mucosal integrity and viability. The model drug lidocaine permeability, 20 kDa fluorescein isothiocyanate-dextran, H&E staining, and mucosal viability were used as evaluation indicators. Firstly, the buccal mucosae of rats, rabbits, dogs, porcine, and humans were analyzed by H&E staining and morphometric analysis to compare the differences. Then, we studied a series of operation methods of isolated mucosa. The buccal mucosae were found to retain their integrity in Kreb's bicarbonate ringer solution at 4 °C for 36 h. Under the long-term storage method with program cooling, freezing at -80 °C, thawing at 37 °C, and using cryoprotectants of 20% glycerol and 20% trehalose, mucosal integrity and biological viability can be maintained for 21 days. The heat separation method was used to prepare a permeability model with a mucosal thickness of 500 μm, which was considered to be the optimal operation. In summary, this study provided an experimental basis for the selection and operation of in vitro penetration models, standardized the research process of isolated mucosa, and improved the accuracy of permeability studies.

Stability, Permeability and Cytotoxicity of Buccal Films in Allergy Treatment

Oral mucoadhesive systems, such as polymer films, are among innovative pharmaceutical products. These systems can be applied in swallowing problems and can also be used in geriatrics and paediatrics. In our earlier work, we successfully formulated buccal mucoadhesive polymer films, which contained cetirizine-hydrochloride (CTZ) as the API. The present study focused on investigating the stability and permeability of the prepared films. The stability of the films was studied with an accelerated stability test. During the stability test, thickness, breaking hardness and in vitro mucoadhesivity were analysed. Furthermore, the interactions were studied with FT-IR spectroscopy, and the changes in the amount of the API were also monitored. Cytotoxicity and cell line permeability studies were carried out on TR 146 buccal cells. Compositions that can preserve more than 85% of the API after 6 months were found. Most of the compositions had a high cell viability of more than 50%. Citric acid (CA) decreased the stability and reduced every physical parameter of the films. However, cell line studies showed that the permeability of the films was enhanced. In our work, we successfully formulated CTZ-containing buccal films with adequate stability, high cell viability and appropriate absorption properties.

Development, characterization, and clinical investigation of Spinacia oleracea based ultra-high pressure homogenized emulsion system for facial physiological parameters

BACKGROUND

Spinacia oleracea (SO) exhibits radical scavenging and tyrosinase inhibition activity indicating potential as a depigmenting agent.

AIMS

To develop and characterize a stable emulsified system containing SO extract through ultra-high pressure homogenization, evaluate skin permeability, and enumerate in-vivo performance in terms of melanin index, skin spots analysis, and related skin physiological parameters.

METHOD

Free radical scavenging and tyrosinase inhibition potential of SO extract was quantified through DPPH radical scavenging and mushroom tyrosinase inhibition assay respectively. 6 SO extract loaded ultra-high pressure emulsified systems (UHSO) were developed using ultra-high pressure homogenizer and assessed for size and polydispersity index (PDI). Among the prepared formulations the optimized formulation (UHSO6) was subjected to 90 days stability studies performed at 8 ºC, 25 ºC, 40 ºC, and 40 ºC+75% RH (relative humidity) for organoleptic features, pH, and rheology. Ex-vivo skin permeability studies were performed on abdominal skin from male albino rat. Changes in skin physiological parameters were evaluated in healthy female volunteers (n=13) for 12 weeks utilizing mexameter®, corneometer® and sebumeter®. Skin spots were analyzed through computerized analysis of high-resolution images by visioFace®.

RESULTS

SO extract exhibited promising antioxidant (88±0.0096%) and tyrosinase inhibition potential (90.6±0.0015 mg of Kojic Acid Eq/g of extract). Optimized UHSO was found to be stable with respect to stability evaluation, globule size (1110 nm), zeta potential (-27.6), and PDI (0.34). Ex-vivo skin permeation of UHSO was significantly higher than SO loaded coarse emulsion. Moreover, the formulation showed a significant decrease in skin melanin, spot count, and spot % area, whereas skin hydration index was improved significantly.

CONCLUSION

Stable SO extract loaded emulsion system was successfully developed by a novel, cost-effective technique of ultra-high pressure homogenization which showed improved performance in terms of skin permeation and other skin physiological parameters.

Permeability of Buccal Mucosa

The buccal mucosa provides an alternative route of drug delivery that can be more beneficial compared to other administration routes. Although numerous studies and reviews have been published on buccal drug delivery, an extensive review of the permeability data is not available. Understanding the buccal mucosa barrier could provide insights into the approaches to effective drug delivery and optimization of dosage forms. This paper provides a review on the permeability of the buccal mucosa. The intrinsic permeability coefficients of porcine buccal mucosa were collected. Large variability was observed among the published permeability data. The permeability coefficients were then analyzed using a model involving parallel lipoidal and polar transport pathways. For the lipoidal pathway, a correlation was observed between the permeability coefficients and permeant octanol/water partition coefficients (K_ow) and molecular weight (MW) in a subset of the permeability data under specific conditions. The permeability analysis suggested that the buccal permeation barrier was less lipophilic than octanol. For the polar pathway and macromolecules, a correlation was observed between the permeability coefficients and permeant MW. The hindered transport analysis suggested an effective pore radius of 1.5 to 3 nm for the buccal membrane barrier.

Nanostructured Ethosomal Gel Loaded with Arctostaphylos uva-ursi extract; In-vitro/In-vivo Evaluation as a Cosmeceutical Product

BACKGROUND

Arctostaphylos uva-ursi (AUU) being rich in polyphenols and arbutin is known to have promising biological activities and can be a potential candidate as a cosmaceutical. Ethosomes encourage the formation of lamellar-shaped vesicles with improved solubility and entrapment of many drugs including plant extracts.

OBJECTIVE

The objective of this work was to develop an optimized nanostructured ethosomal gel formulation loaded with AUU extract and evaluated for skin rejuvenation and depigmentation.

METHODS

AUU extract was tested for phenolic and flavonoid content, radical scavenging potential, reducing power activity, and in-vitro SPF (sun protection factor) estimation. AUU loaded 12 formulations were prepared and characterized by SEM (scanning electron microscopy), vesicular size, zeta potential, and entrapment efficiency (%EE). The optimized formulation was subjected to non-invasive in-vivo investigations after incorporating it into the gel system and ensuring its stability and skin permeation.

RESULTS

Ethosomal vesicles were spherical in shape and Zeta size, zeta potential, PDI (polydispersity index), % EE and in-vitro skin permeation of optimized formulation (F3) were found to be 114.7nm, -18.9mV, 0.492, 97.51±0.023%, and 79.88±0.013% respectively. AUU loaded ethosomal gel formulation was stable physicochemically and exhibited non-Newtonian behavior rheologically. Moreover, it significantly reduced skin erythema, melanin as well as sebum level and improved skin hydration and elasticity.

CONCLUSION

A stable AUU based ethosomal gel formulation could be a better vehicle for phytoextracts than conventional formulations for cosmeceutical applications such as for skin rejuvenation and depigmentation etc.

Resistivity Technique for the Evaluation of the Integrity of Buccal and Esophageal Epithelium Mucosa for In Vitro Permeation Studies: Swine Buccal and Esophageal Mucosa Barrier Models

Permeation assays are important for the development of topical formulations applied on buccal mucosa. Swine buccal and esophageal epithelia are usually used as barriers for these assays, while frozen epithelia have been used to optimize the experimental setup. However, there is no consensus on these methods. In transdermal studies, barrier integrity has been evaluated by measuring electrical resistance (ER) across the skin, which has been demonstrated to be a simple, fast, safe, and cost-effective method. Therefore, the aims here were to investigate whether ER might also be an effective method to evaluate buccal and esophageal epithelium mucosa integrity for in vitro permeation studies, and to establish a cut-off ER value for each epithelium mucosa model. We further investigated whether buccal epithelium could be substituted by esophageal epithelium in transbuccal permeation studies, and whether their permeability and integrity were affected by freezing at -20 °C for 3 weeks. Fresh and frozen swine buccal and esophageal epithelia were mounted in Franz diffusion cells and were then submitted to ER measurement. Permeation assays were performed using lidocaine hydrochloride as a hydrophilic drug model. ER was shown to be a reliable method for evaluating esophageal and buccal epithelia. The esophageal epithelium presented higher permeability compared to the buccal epithelium. For both epithelia, freezing and storage led to decreased electrical resistivity and increased permeability. We conclude that ER may be safely used to confirm tissue integrity when it is equal to or above 3 kΩ for fresh esophageal mucosa, but not for buccal epithelium mucosa. However, the use of esophageal epithelium in in vitro transmucosal studies could overestimate the absorption of hydrophilic drugs. In addition, fresh samples are recommended for these experiments, especially when hydrophilic drugs are involved.

Prolonged Delivery of Apomorphine Through the Buccal Mucosa, Towards a Noninvasive Sustained Administration Method in Parkinson's Disease: In Vivo Investigations in Pigs

In the current work, prolonged systemic delivery of apomorphine via buccal mucosa was shown to be a promising treatment for Parkinson's disease as a substitute for clinically utilized subcutaneous infusions. Due to extensive 'first-pass' metabolism, apomorphine is administered parenterally to bypass liver metabolism. Drawbacks of parenteral administration cause low patient compliance and adherence to treatment. On the other hand, while also bypassing the liver, delivery through buccal mucosa has a superior safety profile, is less costly, lacks pain and discomfort, and possesses excellent accessibility, overall augmenting patient compliance. Current in vivo study in pigs showed: (1) steady plateau levels of apomorphine in plasma were obtained 30 min following administration and remained constant for 8 h until a delivery device was removed, (2) bioavailability of apomorphine was 55%-80% as opposed to <2% peroral and (3) simulation of the pharmacokinetic profile obtained in pigs predicted therapeutically relevant levels of apomorphine in human. Furthermore, antipyrine was incorporated as a permeation marker to enable mechanistic investigation of apomorphine release from the delivery device and its permeation through the buccal mucosa. In addition, limitations of an Ussing diffusion chamber as an ex vivo research tool were also discussed.

Prolonged oral transmucosal delivery of highly lipophilic drug cannabidiol

Delivery of drugs through oral mucosa enables bypass of the gastrointestinal tract and "first pass" metabolism in the liver and the gut. Thus, a higher and less variable bioavailability can be obtained. Mechanisms of this administration route for cannabidiol were investigated in the current research in pigs. Results show that cannabidiol has substantially low permeability rate over 8 h through oral mucosa and accumulates significantly within it. Furthermore, following the removal of the delivery device, residual prolongation of release from the oral mucosa into systemic blood circulation continues for several hours. This method of delivery enabled acquisition of clinically relevant plasma levels of cannabidiol. The absorption profile indicates that cannabidiol, as well as other lipophilic molecules, should be delivered through oral mucosa for systemic absorption from a device that conceals the drug and prevents its washout by the saliva flow and subsequent ingestion into gastrointestinal tract.

Alternatives to Biological Skin in Permeation Studies: Current Trends and Possibilities

: The transdermal route of drugs has received increased attention in recent years due to numerous advantages over the oral and injectable routes, such as avoidance of the hepatic metabolism, protection of drugs from the gastrointestinal tract, sustained drug delivery, and good patient compliance. The assessment of ex vivo permeation during the pharmaceutical development process helps in understanding the product quality and performance of a transdermal delivery system. Generally, excised human skin relevant to the application site or animal skin is recommended for ex vivo permeation studies. However, the limited availability of the human skin and ethical issues surrounding the use of animal skin rendered these models less attractive in the permeation study. In the last three decades, enormous efforts have been put into developing artificial membranes and 3D cultured human skin models as surrogates to the human skin. This manuscript provides an insight on the European Medicines Agency (EMA) guidelines for permeation studies and the parameters affected when using Franz diffusion cells in the permeation study. The need and possibilities for skin alternatives, such as artificially cultured human skin models, parallel artificial membrane permeability assays (PAMPA), and artificial membranes for penetration and permeation studies, are comprehensively discussed.

Temperature-dependent mucosal permeation kinetics of stigmasterol microspheres: In vivo mice model antioral candidiasis study

Evaluation of mucosal permeation of stigmasterol from the glutaraldehyde cross linked chitosan microspheres at increasing experimental temperatures was performed. The activation energy of permeation, partition, and diffusion were estimated to understand the permeation kinetic with respect to the temperature. The formulation depicting least activation energy possessed the increased permeation thresholds of drug at the site of application. The encapsulation efficacy and mucoadhesive strength were found to be directly proportional to the polymer-emulsifier ratio. Decreased intensity in crystallography directed the molecular dispersion of microencapsulated drug. The depleted enthalpic phase transition in thermogram affirmed the stigmasterol encapsulation. The sphericity and the size of microspheres were determined by scanning electron photo micrograph. The in vivo quantification of oral Candida infection with different statistical approach and histopathological observation of infected tongue of mice on treatment with the stigmasterol encapsulated microspheres showed significant anti oral candidiasis activity by reduction of fungal colony count and recovery of papillae, reorganization of basal cell layer and newly formed papillae during 21-28 days of treatment.

Unidirectional drug release from 3D printed mucoadhesive buccal films using FDM technology: In vitro and ex vivo evaluation

Oromucosal delivery of active pharmaceutical ingredients provides an attractive alternative route of administration, due to avoidance of the first pass effect and improved patient compliance. In the current work, fused deposition modelling (FDM) 3D printing was investigated as an additive manufacturing approach for poly(vinyl alcohol)-based mucoadhesive films, enabling unidirectional drug release. For this purpose, chitosan was incorporated as a permeation and mucoadhesion enhancer whereas ethylcellulose and commercial wafer sheets were evaluated as backing layers. The formulated films were initially assessed for structural integrity and dose uniformity. Solid-state characterization of the films, including thermal methods (DSC, TGA), diffraction (XRPD) and Raman spectroscopy, was implemented to characterize the physicochemical properties of the produced polymeric filaments and buccal films. The mechanical properties of the products were investigated by instrumented indentation and tensile tests. Evaluation of buccal films was assessed in vitro, to study the effect of backing-layer type on hydration capacity of the films, diffusion of the drug throughout the restricting layer and release profiles in simulated saliva. The ex vivo performance of the manufactured products, associated with the presence of chitosan, was investigated by textural analysis for mucoadhesion properties, whereas permeation studies and histological studies were performed across porcine buccal epithelium. The results demonstrated that FDM printing is a timesaving and versatile approach in the context of manufacturing multi-layered mucoadhesive buccal films, providing unidirectional release properties.

Full-Thickness Intraoral Mucosa Barrier Models for In Vitro Drug-Permeation Studies Using Microneedles

The use of permeation enhancers such as microneedles (MNs) to increase drug penetration across intraoral mucosa has increased in recent years. Permeation studies, commonly performed using vertical diffusion cells, are a well-established way to preview formulations and enhance their performance during the development stage. However, to our knowledge, the existing intraoral mucosa barrier models do not permit permeation using MN-pretreated mucosa due to their insufficient thickness. Therefore, the objective of this study was to develop a barrier model using thick palate tissues to perform in vitro permeation studies, with physical enhancement of the permeability of intraoral mucosa by pretreatment with MNs. The adapted Franz-type cells used in the permeation experiments were validated (cell dimensions and volume, sealing effectiveness, stirring and dissolution efficiency, temperature control, and establishment of uniaxial flux). Commercially available MNs were used in the palatal mucosa. Optical images of the mucosa were acquired to analyze the microperforations created. In vitro permeation studies were conducted with the MN-pretreated mucosa. This work presents a new in vitro method for the evaluation of MNs as permeation enhancers, with the aim of improving the absorption of drug formulations topically applied within the oral cavity.

Cell culture models of oral mucosal barriers: A review with a focus on applications, culture conditions and barrier properties

Understanding the function of oral mucosal epithelial barriers is essential for a plethora of research fields such as tumor biology, inflammation and infection diseases, microbiomics, pharmacology, drug delivery, dental and biomarker research. The barrier properties are comprised by a physical, a transport and a metabolic barrier, and all these barrier components play pivotal roles in the communication between saliva and blood. The sum of all epithelia of the oral cavity and salivary glands is defined as the blood-saliva barrier. The functionality of the barrier is regulated by its microenvironment and often altered during diseases. A huge array of cell culture models have been developed to mimic specific parts of the blood-saliva barrier, but no ultimate standard in vitro models have been established. This review provides a comprehensive overview about developed in vitro models of oral mucosal barriers, their applications, various cultivation protocols and corresponding barrier properties.

Molecular transport through membranes: Accurate permeability coefficients from multidimensional potentials of mean force and local diffusion constants

Estimating the permeability coefficient of small molecules through lipid bilayer membranes plays an important role in the development of effective drug candidates. In silico simulations can produce acceptable relative permeability coefficients for a series of small molecules; however, the absolute permeability coefficients from simulations are usually off by orders of magnitude. In addition to differences between the lipid bilayers used in vitro and in silico, the poor convergence of permeation free energy profiles and over-simplified diffusion models have contributed to these discrepancies. In this paper, we present a multidimensional inhomogeneous solubility-diffusion model to study the permeability of a small molecule drug (trimethoprim) passing through a POPC (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine) lipid bilayer. Our approach improves the permeation model in three ways: First, the free energy profile (potential of mean force, PMF) is two-dimensional in two key coordinates rather than simply one-dimensional along the direction normal to the bilayer. Second, the 2-D PMF calculation has improved convergence due to application of the recently developed transition-tempered metadynamics with randomly initialized replicas, while third, the local diffusivity coefficient was calculated along the direction of the minimum free energy path on the two-dimensional PMF. The permeability is then calculated as a line integral along the minimum free energy path of the PMF. With this approach, we report a considerably more accurate permeability coefficient (only 2-5 times larger than the experimental value). We also compare our approach with the common practice of computing permeability coefficients based only on the translation of the center of mass of the drug molecule. Our paper concludes with a discussion of approaches for minimizing the computational cost for the purpose of more rapidly screening a large number of drug candidate molecules.

Development and Evaluation of a Novel Mucoadhesive Film Containing Acmella oleracea Extract for Oral Mucosa Topical Anesthesia

Purpose

To develop an anesthetic mucoadhesive film containing Acmella oleracea (jambu) extract for topical use on oral mucosa.

Methods

Ethanolic extracts from aerial parts of jambu were prepared by maceration. Pigment removal was obtained by adsorption with activated carbon. Three mucoadhesive films were developed using a film casting method: 10 or 20% of crude jambu extract (10% JB and 20% JB), and 10% of crude jambu extract treated with activated carbon (10% JBC). The mucoadhesive films were characterized regarding their uniformity, thickness, pH, and spilanthol content, and their stability was evaluated during 120 days. Gas chromatography was used to quantify the amount of spilanthol. In vitro tests determined the permeation of spilanthol across pig esophageal epithelium mucosa in Franz diffusion cells. Topical anesthetic efficacy was assessed in vivo using a tail flick test in mice.

Results

The three mucoadhesive films showed physical stability and visual appearances suitable for use on oral mucosa. The permeation study revealed that the spilanthol from 10% JBC presented higher flux and permeability coefficient values, compared to 10% or 20% JB (p < 0.001). Moreover, 10% JBC showed better topical anesthetic efficacy than the other films (p < 0.01).

Conclusion

Mucoadhesive film containing crude extract of jambu treated with activated carbon is a potential alternative for oral, topical use, encouraging future clinical studies.

Biological processing of dinuclear ruthenium complexes in eukaryotic cells

The biological processing - mechanism of cellular uptake, effects on the cytoplasmic and mitochondrial membranes, intracellular sites of localisation and induction of reactive oxygen species - of two dinuclear polypyridylruthenium(ii) complexes has been examined in three eukaryotic cells lines. Flow cytometry was used to determine the uptake of [{Ru(phen)2}2{μ-bb12}](4+) (Rubb12) and [Ru(phen)2(μ-bb7)Ru(tpy)Cl](3+) {Rubb7-Cl, where phen = 1,10-phenanthroline, tpy = 2,2':6',2''-terpyridine and bbn = bis[4(4'-methyl-2,2'-bipyridyl)]-1,n-alkane} in baby hamster kidney (BHK), human embryonic kidney (HEK-293) and liver carcinoma (HepG2) cell lines. The results demonstrated that the major uptake mechanism for Rubb12 and Rubb7-Cl was active transport, although with a significant contribution from carrier-assisted diffusion for Rubb12 and passive diffusion for Rubb7-Cl. Flow cytometry coupled with Annexin V/TO-PRO-3 double-staining was used to compare cell death by membrane damage or apoptosis. Rubb12 induced significant direct membrane damage, particularly with HepG2 cells, while Rubb7-Cl caused considerably less membrane damage but induced greater levels of apoptosis. Confocal microscopy, coupled with JC-1 assays, demonstrated that Rubb12 depolarises the mitochondrial membrane, whereas Rubb7-Cl had a much smaller affect. Cellular localisation experiments indicated that Rubb12 did not accumulate in the mitochondria, whereas significant mitochondrial accumulation was observed for Rubb7-Cl. The effect of Rubb12 and Rubb7-Cl on intracellular superoxide dismutase activity showed that the ruthenium complexes could induce cell death via a reactive oxygen species-mediated pathway. The results of this study demonstrate that Rubb12 predominantly kills eukaryotic cells by damaging the cytoplasmic membrane. As this dinuclear ruthenium complex has been previously shown to exhibit greater toxicity towards bacteria than eukaryotic cells, the results of the present study suggest that metal-based cationic oligomers can achieve selective toxicity against bacteria, despite exhibiting a non-specific membrane damage mechanism of action.

Formulation and evaluation of sublingual delivery of piroxicam using thermosensitive polymer with an inverted Franz diffusion cell

Objectives

The aim of the study was to prepare a sublingual formulation for piroxicam using a thermosensitive polymer and to evaluate its permeation through porcine sublingual mucosa.

Methods

Formulation technique utilized the transition property of poloxamer from solution state at room temperature to gel state at oromucosal temperature (37 °C). The permeation of the drug was evaluated using an inverted Franz diffusion cell technique that allowed the dosage form to be directly applied onto the substrate with required volume of saliva. The formulation was characterized for microscopy of the piroxicam crystals, sol–gel transition property and in-vitro diffusion study.

Key findings

Poloxamer-based formulation enhanced solubility and increased permeability of the piroxicam.

Conclusion

Poloxamer formulation with 0.1% w/w piroxicam delivered a cumulative amount of 11.99 ± 7.82 and 11.23 ± 1.79 μg/cm2, while non-poloxamer formulation delivered 3.57 ± 2.20 and 4.60 ± 6.90 μg/cm2 with 0.1 and 0.5 ml artificial saliva, respectively, through porcine sublingual tissue in 6 h. A similar delivery profile was observed for 0.05% w/w piroxicam formulation as well.

Thyroid hormone (levothyroxine) replacement via the respiratory route by inhalation: in vitro exploratory studies

OBJECTIVES

To conduct proof of principle studies that will enable development of noninvasive (respiratory) delivery systems for levothyroxine (T4).

METHODS

Preformulation (solubility, stability), formulation and biopharmaceutical (in vitro absorption, transport, gene expression) studies were conducted. Calu-3 cell line was used for permeation studies.

RESULTS

Solubility profiles of T4 were established in aqueous (PBS, HBSS, isotonic saline) and non-aqueous solvents (PEG 400, PEG 600, propylene glycol, glycerine). Transport of the compound across Calu-3 cells suggested involvement of active transport systems. This correlated with expression of thyroxine transporters (MCT8, MCT10, OATP1A2, LAT1 and LAT2) in the cell line. Diffusion characteristics showed significant absorption with no detection of T4 metabolite (triiodothyronine). Formulation studies revealed that stable formulations could be prepared using a combination of aqueous and non-aqueous solvents.

CONCLUSIONS

Results of the studies indicated that T4 can be absorbed effectively from the respiratory mucosa. Factors affecting stability such as pH and temperature should be taken into account during formulation development of this compound for the respiratory route.

Evaluation of different pig oral mucosa sites as permeability barrier models for drug permeation studies

The objective of the present study was to investigate the influence of preparation and storage conditions on the histology and permeability of different parts of porcine oral mucosa used for in vitro studies of transbuccal formulations. Fresh and frozen (-20°C and -80°C, with or without cryoprotectant) epithelia of porcine palatal, gingival, dorsum of the tongue, and buccal mucosa were submitted for histological analyses to determine the effects of storage conditions on barrier integrity. Permeation of lidocaine hydrochloride (used as a hydrophilic model drug) across fresh and previously frozen oral epithelium was measured in order to evaluate the barrier function. Histological evaluation demonstrated that the oral epithelium was successfully separated from the connective tissue, except for gingival mucosa. After storage under different conditions, all tissues presented desquamation of superficial layers and spherical spaces induced by the freezing process. The permeability of lidocaine hydrochloride varied among the fresh oral mucosa and generally increased after freezing. In conclusion, fresh epithelium from the buccal and dorsum of the tongue mucosa should be used for in vitro studies investigating hydrophilic drug transport when these are the desired clinical application sites. However, when the palate is the target site, both fresh and frozen (for up to 4weeks, without addition of cryoprotectant) samples could be used. The addition of glycerol as a cryoprotectant should be avoided due to increased lidocaine hydrochloride permeability.

Oral transmucosal drug delivery--current status and future prospects

Oral transmucosal drug delivery (OTDD) dosage forms have been available since the 1980s. In contrast to the number of actives currently delivered locally to the oral cavity, the number delivered as buccal or sublingual formulations remains relatively low. This is surprising in view of the advantages associated with OTDD, compared with conventional oral drug delivery. This review examines a number of aspects related to OTDD including the anatomy of the oral cavity, models currently used to study OTDD, as well as commercially available formulations and emerging technologies. The limitations of current methodologies to study OTDD are considered as well as recent publications and new approaches which have advanced our understanding of this route of drug delivery.