Evaluation of drug release profile from patches based on styrene-isoprene-styrene block copolymer: the effect of block structure and plasticizer

Drug-Eluting Rubber Bands for Tissue Ligation

Rubber band ligation is a commonly used method for the removal of tissue abnormalities. Most often, rubber band ligation is performed to remove internal hemorrhoids unresponsive to first line treatments to avoid surgery. While the procedure is considered safe, patients experience mild to significant pain and discomfort until the tissue sloughs off. As patients often require multiple bandings and sessions, reducing these side effects can have a considerable effect on patient adherence and quality of life. To reduce pain and discomfort, we developed drug-eluting rubber bands for ligation procedures. We investigated the potential for a band to elute anesthetics and drug combinations to durably manage pain for a period of up to 5 days while exhibiting similar mechanical properties to conventional rubber bands. We show that the rubber bands retain their mechanical properties despite significant drug loading. Lidocaine, released from the bands, successfully altered the calcium dynamics of cardiomyocytes in vitro and modulated heart rate in zebrafish embryos, while the bands exhibited lower cytotoxicity than conventional bands. Ex vivo studies demonstrated substantial local drug release in enteric tissues. These latex-free bands exhibited sufficient mechanical and drug-eluting properties to serve both ligation and local analgesic functions, potentially enabling pain reduction for multiple indications.

Design of a Stable Coamorphous System Using Lactose as an Antiplasticizing Agent for Diphenhydramine Hydrochloride with a Low Glass Transition Temperature

Coamorphous systems comprising small molecules are emerging as counterparts to polymeric solid dispersions. However, the glass transition temperatures (T_gs) of coamorphous materials are relatively low because of the lack of polymeric carriers with higher T_gs. This study aimed to investigate the applicability of lactose (LAC) as an antiplasticizing coformer to a coamorphous system. Diphenhydramine hydrochloride (DPH) was selected as a model drug (T_g = 16 °C). Differential scanning calorimetry showed a comelting point in addition to a decrease in the neat melting points depending on the composition of the physical mixtures, suggesting that the mixture of DPH-LAC was eutectic. The melting point of the eutectic mixture was calculated according to the Schröder-van Laar equation. The heat of fusion of the eutectic mixture was maximized at a 70:30 molar ratio of DPH to LAC; at this point, the melting peaks of the pure components disappeared. The heat flow profiles following the melting and cooling of DPH-LAC physical mixtures at the ratios from 10:90 to 90:10 showed a single T_g, suggesting the formation of a coamorphous system. Lactose showed a T_g of over 100 °C, and the T_g of DPH increased with the molar ratio of LAC; it was 84 °C at a 10:90 molar ratio of DPH to LAC. The Raman image indicated the formation of a homogeneous dispersion of DPH and LAC in the coamorphous system. Peak shifts in the infrared spectra indicated the presence of intermolecular interactions between the amino group of DPH and the hydroxyl group of LAC. Principal component analysis of the infrared spectra revealed a significant change at the 70:30 molar ratio of DPH to LAC, which was in agreement with the results of the thermal analysis. A stability test at 40 °C revealed rapid crystallization of the supercooled liquid DPH. The coamorphous samples containing 10-50% of LAC remained in an amorphous state for 21 days, and no crystallization was observed for the samples containing >60% of LAC for 28 days. The relatively lower T_g (less than 40 °C) of the coamorphous system containing 10-50% of LAC might have caused crystallization during storage. These findings indicate that LAC, which is a safe and widely used pharmaceutical excipient, can be applied to coamorphous systems as an antiplasticizing coformer.

Micelle nanovehicles for co-delivery of Lepidium meyenii Walp. (maca) polysaccharide and chloroquine to tumor-associated macrophages for synergistic cancer immunotherapy

Here, we fabricated amphiphilic polysaccharide micelles for synergistic cancer immunotherapy targeting tumor-associated macrophages (TAMs). Lepidium meyenii Walp. (maca) polysaccharide (MP), a naturally derived macromolecule with a strong TAM-remodeling effect, was grafted on a hydrophobic poly(lactic-co-glycolic acid) (PLGA) segment, with a disulfide bond for redox-sensitive linkage. The amphiphilic polysaccharide derivatives could self-assemble into core (PLGA)-shell (MP)-structured micelles and encapsulate chloroquine (CQ) into the hydrophobic core. By using a 4T1-M2 macrophage co-culture model and a 4T1 tumor xenograft mouse model, we showed that the prepared micelles could co-deliver MP and CQ to the tumor sites and selectively accumulate at TAMs because of the specific properties of MP. Furthermore, the nanoparticles exerted synergistic tumor immunotherapeutic and antimetastatic effects, which might be attributable to the enhanced cell internalization of the micelles and the multiple regulatory mechanisms of MP and CQ. Thus, immunomodulatory MP may be a promising biomaterial for cancer immunotherapy.

Dissolvable microneedles based on Panax notoginseng polysaccharide for transdermal drug delivery and skin dendritic cell activation

This work explored the feasibility of using biological polysaccharide to fabricate dissolvable microneedles (MNs) for the purpose of transdermal drug delivery and skin dendritic cell (DC) activation. Panax notoginseng polysaccharide (PNPS), a naturally derived immunoactive macromolecule, was used to fabricate dissolvable MNs. The prepared PNPS MNs showed a satisfactory mechanical strength and a skin penetration depth. By Franz diffusion cell assay, the PNPS MNs demonstrated a high transdermal delivery amount of model drugs. Furthermore, with the assistance of MNs, PNPS easily penetrated across the stratum corneum and target ear skin DCs, activating the maturation and migration of immunocytes by increasing the expressions of CD40, CD80, CD86, and MHC II of skin DCs. Consequently, the matured DCs migrated to the auricular draining lymph nodes and increased the proportions of CD4+ T and CD8+ T cells. Thus, PNPS might be a promising biomaterial for transdermal drug delivery, with adjuvant potential.

Synthesis and Antimicrobial Properties of Highly Cross-Linked pH-Sensitive Hydrogels through Gamma Radiation

The design of new polymeric systems for antimicrobial drug release focused on medical/surgical procedures is of great interest in the biomedical area due to the high prevalence of bacterial infections in patients with wounds or burns. For this reason, in this work, we present a new design of pH-sensitive hydrogels copolymerized by a graft polymerization method (gamma rays), intended for localized prophylactic release of ciprofloxacin and silver nanoparticles (AgNPs) for potential topical bacterial infections. The synthesized hydrogels were copolymerized from acrylic acid (AAc) and agar. Cross-linked hydrogel film formation depended on monomer concentrations and the degree of radiation used (Cobalt-60). The obtained hydrogel films were characterized by attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and mechanical testing. The swelling of the hydrogels was evidenced by the influence of their pH-sensitiveness. The hydrogel was loaded with antimicrobial agents (AgNPs or ciprofloxacin), and their related activity was evaluated. Finally, the antimicrobial activity of biocidal-loaded hydrogel was tested against Escherichia coli (E. coli) and methicillin-resistant Staphylococcus aureus (MRSA) on in vitro conditions.

Development of Drug-in-Adhesive Patch with a Honeycomb Film as a Backing Layer

Excess stripping of stratum corneum (SC) layers by patch-peeling from the skin surface is one cause of skin irritation. High SC hydration by patch occlusion may also cause skin irritation, although the occlusive technique is preferable to increase the skin permeation of topically applied drugs. In the present study, film having a honeycomb structure was selected as the backing layer of a drug-in-adhesive (DIA) patch to reduce peeling of the SC without losing adhesion force to the skin surface, as well as decreasing the skin permeation of a model drug, tulobuterol. The usefulness of the DIA patch with honeycomb film was evaluated by transepidermal water loss (TEWL) changes, amount of SC removed by patch-peeling, distribution pattern of removed SC on the adhesive layer, and water permeation through the patch. Furthermore, skin permeation and release profiles of tulobuterol from the DIA patch were investigated. Significantly (p<0.05) less TEWL change was observed after removal of the patch with a honeycomb film compared with the conventional pressure-sensitive adhesive patch, and no difference in tulobuterol permeation through skin from the patches was confirmed regardless of the type of backing layer. In addition, a lower amount of SC was removed by the peeling of the patch with a honeycomb film. The results suggest that DIA patches with a honeycomb film as a backing layer may be used to achieve less SC removal without reducing the skin permeation of drugs.

Thermosensitive Poloxamer 407/Poly(Acrylic Acid) Hydrogels with Potential Application as Injectable Drug Delivery System

Thermosensitive hydrogels are of great interest for in situ gelling drug delivery. The thermosensitive vehicle with a gelation temperature in a range of 30-36°C would be convenient to be injected as liquid and transform into gel after injection. To prepare novel hydrogels gelling near body temperature, the gelation temperature of poloxamer 407 (PX) were tailored by mixing PX with poly(acrylic acid) (PAA). The gelation behaviors of PX/PAA systems as well as the interaction mechanism were investigated by tube inversion, viscoelastic, shear viscosity, DSC, SEM, and FTIR studies. The gelation temperature of the plain PX solutions at high concentration of 18, 20, and 22% (w/w) gelled at temperature below 28°C, which is out of the suitable temperature range. Mixing PX with PAA to obtain 18 and 20% (w/w) PX with 1% (w/w) PAA increased the gelation temperature to the desired temperature range of 30-36°C. The intermolecular entanglements and hydrogen bonds between PX and PAA may be responsible for the modulation of the gelation features of PX. The mixtures behaved low viscosity liquid at room temperature with shear thinning behavior enabling their injectability and rapidly gelled at body temperature. The gel strength increased, while the pore size decreased with increasing PX concentration. Metronidazole, an antibiotic used for periodontitis, was incorporated into the matrices, and the drug did not hinder their gelling ability. The gels showed the sustained drug release characteristic. The thermosensitive PX/PAA hydrogel could be a promising injectable in situ gelling system for periodontal drug delivery.

Synthesis and structure–property relationships of SIS-g-PB copolymers and their application in hot-melt pressure-sensitive adhesives

Grafting polybutadiene blocks onto epoxidized styrene-b-isoprene-b-styrene (ESIS) copolymers results in significant improvement of ESIS-based adhesives performance while retaining polarity.

Effect of isopropyl myristate on the viscoelasticity and drug release of a drug-in-adhesive transdermal patch containing blonanserinEffect of isopropyl myristate on the viscoelasticity and drug release of a drug-in-adhesive transdermal patch containing blonanserinretain-->

The purpose of this study was to investigate the effect of isopropyl myristate (IPM), a penetration enhancer, on the viscoelasticity and drug release of a drug-in-adhesive transdermal patch containing blonanserin. The patches were prepared with DURO-TAK^® 87-2287 as a pressure-sensitive adhesive (PSA) containing 5% (w/w) of blonanserin and different concentrations of IPM. An in vitro release experiment was performed and the adhesive performance of the drug-in-adhesive patches with different concentrations of IPM was evaluated by a rolling ball tack test and a shear-adhesion test. The glass transition temperature (T_g) and rheological parameters of the drug-in-adhesive layers were determined to study the effect of IPM on the mechanical properties of the PSA. The results of the in vitro release experiment showed that the release rate of blonanserin increased with an increasing concentration of IPM. The rolling ball tack test and shear-adhesion test showed decreasing values with increasing IPM concentration. The results were interpreted on the basis of the IPM-induced plasticization of the PSA, as evidenced by a depression of the glass transition temperature and a decrease in the elastic modulus. In conclusion, IPM acted as a plasticizer on DURO-TAK^® 87-2287, and it increased the release of blonanserin and affected the adhesive properties of the PSA.

Design and evaluation of a monolithic drug-in-adhesive patch for testosterone based on styrene-isoprene-styrene block copolymer

The purpose of the present study was to design and evaluate a monolithic drug-in-adhesive patch with a novel pressure-sensitive adhesive (PSA) matrix based on styrene-isoprene-styrene (SIS) block copolymer. Testosterone was selected as the model drug. The orthogonal array design for ternary mixtures was employed to optimize the amounts of SIS, C-5 hydrocarbon resin, and liquid paraffin. The drug release percentage, water vapor permeability, adhesive properties were chosen as response variables. The patch formulation was optimized by investigating the effects of the drug loading capacity, the type, and amount of permeation enhancer on the adhesive properties and skin permeation. The compositions of the optimal matrix were: 120 g of SIS copolymer, 120 g of C-5 hydrocarbon resin, 60 g of liquid paraffin. An optimized formulation with maximum skin permeation and acceptable adhesive properties was developed incorporating 2% testosterone and 6% isopropyl myristate. No significant differences for in vitro release, skin permeation, and in vivo absorption were observed between the optimal formulation and Testopatch®. The stability evaluation showed that the patches were stable at 25°C/60% relative humidity for 6 months. The result indicated that SIS copolymer was a suitable and compatible polymer for the development of PSA.

Development and evaluation of α-asarone transdermal patches based on hot-melt pressure-sensitive adhesives

A hot-melt, pressure-sensitive adhesive (HMPSA) based on styrene-isoprene-styrene was prepared, and its compatibility with various transdermal penetration enhancers was investigated. The effect of penetration enhancers on the adhesion properties of HMPSA was also studied. A drug-in-adhesive patch was formulated using α-asarone as a model drug, and penetration enhancers were screened by an in vitro transdermal study across excised pig skin. The pharmacokinetics in rabbits was also studied. The results show that HMPSA was miscible with most penetration enhancers (azone, menthol, isopropyl myristate, 1-methyl-pyrrolidinone, N,N-dimethylformamide, oleic acid), apart from propylene glycol. Penetration enhancers had a plasticizer-like effect that decreased the peel strength and shear strength of HMPSA. A combination of 1% oleic acid and 4% menthol had the highest in vitro penetration rate and was selected for patch preparation. The patch formulation was optimized by replacing some of the plasticizer by penetration enhancers to achieve good adhesion and effective transdermal flux. The final patch showed a high efficiency, with a relative bioavailability of 1,494%. This suggests that HMPSA may be a promising material for drug-delivery patches.

A thermoplastic elastomer patch matrix for traditional Chinese medicine: design and evaluation

OBJECTIVE

To design and evaluate a novel pressure sensitive adhesive (PSA) patch containing traditional Chinese medicine (TCM) using styrene-isoprene-styrene (SIS) copolymer.

METHOD

A mixture D-optimal design with ternary response surface diagram was employed in the optimization process. The proportions of SIS copolymer, tackifying resin and plasticizer were selected as the independent variables while tack force, peel strength of the patch and skin penetrability of methyl salicylate were selected as the dependent variables. The optimized patch was then evaluated including in vivo absorption, pharmacological activities and skin irritation, by comparing with a commercial patch based on natural rubber.

RESULTS

The optimized patch, which comprised 30.0% SIS copolymer, 26.6% tackifying resin and 43.4% plasticizer, was superior to commercial patch in skin permeation, pharmacological activities and skin biocompatibility.

CONCLUSION

SIS copolymer was a suitable substitute to natural rubber in producing patches containing TCM formula.

A drug-in-adhesive matrix based on thermoplastic elastomer: evaluation of percutaneous absorption, adhesion, and skin irritation

A novel drug-in-adhesive matrix was designed and prepared. A thermoplastic elastomer, styrene-isoprene-styrene (SIS) block copolymer, in combination with tackifying resin and plasticizer, was employed to compose the matrix. Capsaicin was selected as the model drug. The drug percutaneous absorption, adhesion properties, and skin irritation were investigated. The results suggested that the diffusion through SIS matrix was the rate-limiting step of capsaicin percutaneous absorption. [SI] content in SIS and SIS proportions put important effects on drug penetration and adhesion properties. The chemical enhancers had strong interactions with the matrix and gave small effect on enhancement of drug skin permeation. The in vivo absorption of samples showed low drug plasma peaks and a steady and constant plasma level for a long period. These results suggested that the possible side effects of drug were attenuated, and the pharmacological effects were enhanced with an extended therapeutic period after application of SIS matrix. The significant differences in pharmacokinetic parameters produced by different formulations demonstrated the influences of SIS copolymer on drug penetrability. Furthermore, the result of skin toxicity test showed that no skin irritation occurred in guinea pig skin after transdermal administration of formulations.