Novel pH- and temperature-responsive blend hydrogel microspheres of sodium alginate and PNIPAAm-g-GG for controlled release of isoniazid

Characteristics and release of isoniazid from inhalable alginate/carrageenan microspheres

Aim: Inhalable microspheres made of polymers as a targeted drug delivery system have been developed to overcome the limitation of current treatments in Tuberculosis. Materials & methods: Isoniazid inhalable microspheres were created using a gelation ionotropic method with sodium alginate, carrageenan and calcium chloride in four different formulations. Result: The particle morphology has smooth surfaces and round spherical shapes with sizes below 5 μm; good flowability. The drug loading and entrapment efficiency values ranged from 1.69 to 2.75% and 62.44 to 85.30%, respectively. The microspheres drug release followed the Korsmeyer-Peppas model, indicating Fickian diffusion. Conclusion: Isoniazid inhalable microspheres achieved as targeted lung delivery for tuberculosis treatment.

Alginate/chitosan hydrogels as perspective transport systems for cefotaxime

This work reports synthesis of pH-responsive alginate/chitosan hydrogel spheres with the average diameter of 2.0 ± 0.05 mm, which contain cefotaxime that is an antibiotic of the cefalosporine group. The spheres provided the cefotaxime encapsulation efficiency of 95 ± 1%. An in vitro release of cefotaxime from the spheres in the media that simulate human biological fluids in peroral delivery conditions was found to be a pH-dependent process. The analysis of cefotaxime release kinetics by the Korsmeyer-Peppas model revealed a non-Fickian mechanism of its diffusion, which may be related to intermolecular interactions occurring between the antibiotic and chitosan. Conductometry, UV spectroscopy, and IR spectroscopy were used to study complexation of chitosan with cefotaxime in aqueous media with varied pH, characterize the composition of the complexes, and calculate their stability constants. The composition of the cefotaxime-chitosan complexes was found to correspond to the 1.0:4.0 and 1.0:2.0 molar ratios of the components at pH 2.0 and 5.6, respectively. Quantum chemical modeling was used to evaluate energy characteristics of chitosan-cefotaxime complexation considering the influence of a solvent.

Phase transition and potential biomedical applications of thermoresponsive compositions based on polysaccharides, proteins and DNA: A review

Smart thermoresponsive polymers have long attracted attention as materials of a great potential for biomedical applications, mainly for drug delivery, tissue engineering and wound dressing, with a special interest to injectable hydrogels. Poly-N-isopropylacrylamide (PNIPAM) is the most important synthetic thermoresponsive polymer due to its physiologically relevant transition temperature. However, the use of unmodified PNIPAM encounters such problems as low biodegradability, low drug loading capacity, slow response to thermal stimuli, and insufficient mechanical robustness. The use of natural polysaccharides and proteins in combinations with PNIPAM, in the form of grafted copolymers, IPNs, microgels and physical mixtures, is aimed at overcoming these drawbacks and creating dual-functional materials with both synthetic and natural polymers' properties. When developing such compositions, special attention should be paid to preserving their key property, thermoresponsiveness. Addition of hydrophobic and hydrophilic fragments to PNIPAM is known to affect its transition temperature. This review covers various classes of natural polymers - polysaccharides, fibrous and non-fibrous proteins, DNA - used in combination with PNIPAM for the prospective biomedical purposes, with a focus on their phase transition temperatures and its relation to the natural polymer's structure.

Recent advances in cellulose, pectin, carrageenan and alginate-based oral drug delivery systems

Polymers-based drug delivery systems constitute one of the highly explored thrust areas in the field of the medicinal and pharmaceutical industries. In the past years, the properties of polymers have been modified in context to their solubility, release kinetics, targeted action site, absorption, and therapeutic efficacy. Despite the availability of diverse synthetic polymers for the bioavailability enhancement of drugs, the use of natural polymers is still highly recommended due to their easy availability, accessibility, and non-toxicity. The aim of the review is to provide the available literature of the last five years on oral drug delivery systems based on four natural polymers i.e., cellulose, pectin, carrageenan, and alginate in a concise and tabulated manner. In this review, most of the information is in tabulated form to provide easy accessibility to the reader. The data related to active pharmaceutical ingredients and supported components in different formulations of the mentioned polymers have been made available.

Synthesis and Phase Behavior of a Linear Amphiphilic Multiblock Copolymer

Linear amphiphilic multiblock copolymer PPMPEs, obtained through a stepwise method, and linear amphiphilic random copolymer PPMPEs-1, obtained through a one-pot method, were synthesized using poly(propylene glycol) diglycidyl ether (PPGDGE), poly(ethylene glycol) diglycidyl ether (PEGDGE), and monoethanolamine (MEA) as the main raw materials. The structures of PPMPEs and PPMPEs-1 were characterized by FT-IR, ¹H NMR, and gel permeation chromatography, which proved that the copolymers were synthesized with different components. Transmittance of the copolymer was tested by UV-vis. By changing the ratio of PEGDGE content and the concentration of the copolymer aqueous solution, the phase behaviors of PPMPEs and PPMPEs-1 were compared and studied in depth. It mainly highlighted the advantages of the stepwise method compared to the one-pot method. The transmittance of the polymer solutions could be improved by lowering the pH value in the acidic solution or increasing the pH value in the alkaline solution. Moreover, as the reaction degree of the PPMPEs hydrophobic chain segment increased, the transmittance decreased.

Preparation and Drug Release Properties of a Thermo Sensitive GA Hydrogel

A high-strength galactomannan (GA)-based hydrogel with thermal response and pH response is introduced in this paper. GA, N-isopropylacrylamide (NIPAM), N-[3-dimethylamino)propyl]methylacrylamide (DMAPMA), and montmorillonite were used to form hydrogels through a simple mixed static system. Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM) were used to characterize the structure and properties of the hydrogels. The compressive strength of the the hydrogel increased from 23.9 to 105.61 kPa with the increase of GA dosage from 0 to 1.5 wt%. When the NIPAM content in the monomer increased from 75% to 95%, the lower critical solution temperature (LCST) of the hydrogel changed from 36.5 to 45.8 °C. When the monomer content was higher than 10wt%, the swelling kinetics of the sample changed from the second-order equation to the first-order equation. With the increase of the proportion of NIPAM monomer, the release rate of bovine serum album in the early stage was faster, and the cumulative release rate was close to 100%.The release rate of bovine serum albumin at 37 °C was higher than that at 25 °C. The release rate of the hydrogel containing bovine serum albumin was the fastest under the condition of pH 7.4, followed by those at pH 6.6 and pH 5.0. The results showed that this thermal-responsive hydrogel has potential applications as a drug carrier for colon delivery.

Current Status of Alginate in Drug Delivery

Alginate is one of the natural polymers that are often used in drug- and protein-delivery systems. The use of alginate can provide several advantages including ease of preparation, biocompatibility, biodegradability, and nontoxicity. It can be applied to various routes of drug administration including targeted or localized drug-delivery systems. The development of alginates as a selected polymer in various delivery systems can be adjusted depending on the challenges that must be overcome by drug or proteins or the system itself. The increased effectiveness and safety of sodium alginate in the drug- or protein-delivery system are evidenced by changing the physicochemical characteristics of the drug or proteins. In this review, various routes of alginate-based drug or protein delivery, the effectivity of alginate in the stem cells, and cell encapsulation have been discussed. The recent advances in the in vivo alginate-based drug-delivery systems as well as their toxicities have also been reviewed.

Natural Polymer-based Stimuli-responsive Hydrogels

The abilities of intelligent polymer hydrogels to change their structure and volume phase in response to external stimuli have provided new possibilities for various advanced technologies and great research and application potentials in the medical field. The natural polymer-based hydrogels have the advantages of environment-friendliness, rich sources and good biocompatibility. Based on their responsiveness to external stimuli, the natural polymer-based hydrogels can be classified into the temperature-responsive hydrogel, pH-responsive hydrogel, light-responsive hydrogel, electricresponsive hydrogel, redox-responsive hydrogel, enzyme-responsive hydrogel, magnetic-responsive hydrogel, multi-responsive hydrogel, etc. In this review, we have compiled some recent studies on natural polymer-based stimuli-responsive hydrogels, especially the hydrogels prepared from polysaccharides. The preparation methods, properties and applications of these hydrogels in the medical field are highlighted.

Molecular Dynamics Simulation, Characterization and In Vitro Drug Release of Isoniazid Loaded Poly-ε-caprolactone Magnetite Nanocomposite

Background: This study reports on the development of a controlled-release isoniazid (INH) drug delivery system using poly-є-caprolactone (PCL) functionalized magnetite-nanoparticles (MNPs), as a theoretical potential tool for tuberculosis (TB) chemotherapy. Method: The magnetite Fe3O4 core was fabricated by the co-precipitation method and coated with PCL by emulsion polymerization. INH was loaded onto the PCL-MNP surface to shape an INH-PCL-MNP nanocomposite. Deposing the INH on the nanocomposite surface was demonstrated through the molecular dynamics simulations. To investigate the stability of the polymer, the root-mean-square deviation (RMSD) and the radius of gyration (Rg) were calculated. The composite was characterized by Scanning electron microscopy (SEM) and X-Ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). Mycobacterium tuberculosis was used to assess the antimicrobial activity of the nanoparticles. The drug loading efficiency, drug content, and in-vitro release behavior of the INH-PCL-MNPs were evaluated by UV–Vis spectrophotometry. Results: RMSD of PCL show that the structure of polymer after 40 ns is stable. INH molecules interested to spend more time close to the polymer. Rg of PCL indicated that PCL folded and radius of gyration changed near 1nm. The drug loading efficiency and drug content of the NPs were 720±46 mg/g and 69.3±3.8 (%), respectively. The compound showed a strong level of activity in-vitro. The amount of drug release at all times was above the minimum inhibitory concentration (MIC) (6 μg/ml). Conclusion: INH-PCL-MNP nanocomposite have been effectively used as a potential tool to treat TB infections and a magnetic drug carrier system.

Synthesis and characterisation of redox hydrogels based on stable nitroxide radicals

The principle of encapsulation/release of a guest molecule from stimuli responsive hydrogels (SRHs) is mainly realised with pH, temperature or light stimuli. However, only a limited number of redox responsive hydrogels have been investigated so far. We report here the development of a SRH that can release its guest molecule upon a redox stimulus. To obtain this redox hydrogel, we have introduced into the hydrogel the 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) stable nitroxide radical, which can be reversibly oxidized into an oxoammonium cation (TEMPO+). Water solubility is provided by the presence of the (oligoethyleneglycol)methacrylate (OEGMA) comonomer. Electrochemical and mechanical characterization showed that those gels exhibit interesting physicochemical properties, making them very promising candidates for practical use in a wide range of applications.

Polymeric Microsphere Formulation for Colon Targeted Delivery of 5-Fluorouracil Using Biocompatible Natural Gum Katira

Controlled release delivery system of chemotherapeutic agents at the site of colon endorses modern drug-entrapped delivery tools, which release the entrappedagents at a controlled rate for anextended period providing patient compliance and additional protection from the degradinggastric environment. Thus, the present study was aimed to develop and optimize a novel polymeric microsphere of 5-fluorouracil (5-FU) using natural gum katira to obtain an optimal therapeutic response at the colon. Due course of experimentation, in-vivo safety profile of the gum katira in an animal model was established. Modified solvent extraction/evaporation technique wasemployed to encapsulate 5-FU in the natural polymeric microsphere and was characterized using in-vitro studies to investigate particle size, morphology, encapsulation efficiency and release of the drug from developed formulation. Formulated and optimized polymeric microsphere of 5-FU using gum katira polymer own optimal physicochemical characteristics with a fine spherical particle with size ranged from 210.37±7.50 to 314.45±7.80 µm.Targeted microsphere exhibited good cytotoxicity and also has high drug entrapment efficiency, and satisfactory release pattern of the drug within a time frame of 12 h. Finally, we foresee that the optimized polymeric gum katiramicrosphere of 5-FU could be a promising micro-carrier for efficient colon drug targeting delivery tool with improved chemotherapeutic efficacy against colon cancer.

AMF responsive DOX-loaded magnetic microspheres: transmembrane drug release mechanism and multimodality postsurgical treatment of breast cancer

DOX-loaded magnetic alginate–chitosan microspheres were developed to evaluate alternating magnetic field-responsive, synergistic chemo-thermal cancer therapy.

Poly(N-isopropylacrylamide) and Copolymers: A Review on Recent Progresses in Biomedical Applications

The innate ability of poly(N-isopropylacrylamide) (PNIPAAm) thermo-responsive hydrogel to copolymerize and to graft synthetic polymers and biomolecules, in conjunction with the highly controlled methods of radical polymerization which are now available, have expedited the widespread number of papers published in the last decade-especially in the biomedical field. Therefore, PNIPAAm-based hydrogels are extensively investigated for applications on the controlled delivery of active molecules, in self-healing materials, tissue engineering, regenerative medicine, or in the smart encapsulation of cells. The most promising polymers for biodegradability enhancement of PNIPAAm hydrogels are probably poly(ethylene glycol) (PEG) and/or poly(ε-caprolactone) (PCL), whereas the biocompatibility is mostly achieved with biopolymers. Ultimately, advances in three-dimensional bioprinting technology would contribute to the design of new devices and medical tools with thermal stimuli response needs, fabricated with PNIPAAm hydrogels.

Chitosan nanoparticles as carrier systems for the plant growth hormone gibberellic acid

This work concerns the development of nanocarriers composed of alginate/chitosan (ALG/CS) and chitosan/tripolyphosphate (CS/TPP) for the plant growth regulator gibberellic acid (GA₃). ALG/CS nanoparticles with and without GA₃ presented mean size of 450±10nm, polydispersity index (PDI) of 0.3, zeta potential of -29±0.5mV, concentrations of 1.52×10¹¹ and 1.92×10¹¹ nanoparticles mL^-1, respectively, and 100% encapsulation efficiency. CS/TPP nanoparticles with and without GA₃ presented mean size of 195±1nm, PDI of 0.3, zeta potential of +27±3mV, concentrations of 1.92×10¹² and 3.54×10¹² nanoparticles mL^-1, respectively, and 90% encapsulation efficiency. The nanoparticles were stable during 60days and the two systems differed in terms of the release mechanism, with the release depending on factors such as pH and temperature. Bioactivity assays using Phaseolus vulgaris showed that the ALG/CS-GA₃ nanoparticles were most effective in increasing leaf area and the levels of chlorophylls and carotenoids. The systems developed showed good potential, providing greater stability and efficiency of this plant hormone in agricultural applications.

The formulation of nanomedicines for treating tuberculosis

Recent estimates indicate that tuberculosis (TB) is the leading cause of death worldwide, alongside the human immunodeficiency virus (HIV) infection. The current treatment is effective, but is associated with severe adverse-effects and noncompliance to prescribed regimens. An alternative route of drug delivery may improve the performance of existing drugs, which may have a key importance in TB control and eradication. Recent advances and emerging technologies in nanoscale systems, particularly nanoparticles (NPs), have the potential to transform such approach to human health and disease. Until now, several nanodelivery systems for the pulmonary administration of anti-TB drugs have been intensively studied and their utility as an alternative to the classical TB treatment has been suggested. In this context, this review provides a comprehensive analysis of recent progress in nanodelivery systems for pulmonary administration of anti-TB drugs. Additionally, more convenient and cost-effective alternatives for the lung delivery, different types of NPs for oral and topical are also being considered, and summarized in this review. Lastly, the future of this growing field and its potential impact will be discussed.

Alginate–marine collagen–agarose composite hydrogels as matrices for biomimetic 3D cell spheroid formation

We report a novel, customizable, transparent, biocompatible, functional, easy-to-produce, efficient and cost-effective AmCA scaffold for 3D cell culture.

The design of pH-sensitive chitosan-based formulations for gastrointestinal delivery

Chitosan, a nontoxic and biocompatible polysaccharide, has been widely explored for the gastrointestinal delivery of drugs, proteins, peptides and genes for different therapeutic purposes. Because a pH gradient exists in the gastrointestinal tract, chitosan-based formulations in response to specific pH conditions, such as the low pH in the stomach and a high pH in the intestine, have been developed as a general strategy for disease diagnosis and therapy. Tailored pH-responsive drug release in the gastrointestinal tract can be achieved with various chitosan-based formulations such as nanoparticles, microspheres, hydrogels and nanocomposites. This review focuses on the most recent development of chitosan-based pH-sensitive formulations for gastrointestinal delivery, covering various types of chitosan-based formulations, their pH-responsive mechanisms and biomedical applications.

Visible-light-induced synthesis of pH-responsive composite hydrogels for controlled delivery of the anticonvulsant drug pregabalin

We report here a novel method for the synthesis of a pH-responsive composite using visible light. Formation of the pH-responsive layer is based on poly(methacrylic acid-g-ethylene glycol) as the macromer, eosin Y as the photoinitiator and triethanolamine as the co-initiator. The hydrogel was functionalized with hydrophobic domains through incorporation of crosslinked styrene-butadiene-styrene (SBS) copolymer into the pH-responsive prepolymer. Swelling ratios were decreased with the addition of SBS, and resulted in high hydrogel crosslink density. The composite allowed for controlled release of an anticonvulsant model drug, pregabalin, under neutral pH condition and the release was analyzed to describe the mode of transport through the network. In vitro human fibroblast survival assay and in vivo rabbit implantation experiments demonstrated that this hybrid network is not toxic and has desirable biocompatibility properties. This is the first report about the synthesis of a pH-responsive network incorporating crosslinked SBS synthesized under visible light. The approach for multifunctional membranes could allow the incorporation of molecules with specific functionalities so that sequential molecule delivery in response to specific stimuli could be achieved.

Preparation and properties of a pH sensitive carrier based on three kinds of polymer blend to control the release of 5-amino salicylic acid

CONTEXT

High concentration of 5-amino salicylic acid (5-ASA) in the distal ileum and colon is necessary for the treatment of inflammatory bowel disease (IBD). The control of small molecules, drugs, released from a polymeric matrix remains a great challenge.

OBJECTIVE

To study the preparation and properties of a pH-sensitive carrier for targeting delivery of 5-ASA.

MATERIALS AND METHODS

The carrier was prepared by ternary blends method based on polyvinyl alcohol (PVA), sodium alginate (SA) and polylactic acid. It was characterized by infrared spectrometry and scanning electronic microscopy. The adsorption and release of 5-ASA in different pH media were investigated.

RESULTS

We found out the best ratio of the materials for synthetic carrier. The vector exhibited good performance by the controlled release of the target drug experiment. The adsorption capacity of the carrier for 5-ASA was 70.34% in phosphate buffer saline at pH 1.00, and the release rate was 100.49% in phosphate buffer solution at pH 6.80.

DISCUSSION AND CONCLUSION

PVA is vector backbone of the carrier, and SA plays key role in its pH performance. It is a promising material to effectively deliver 5-ASA to the specific sites of IBD.

Alginate Particles as Platform for Drug Delivery by the Oral Route: State-of-the-Art

Pharmaceutical research and development aims to design products with ensured safety, quality, and efficacy to treat disease. To make the process more rational, coherent, efficient, and cost-effective, the field of Pharmaceutical Materials Science has emerged as the systematic study of the physicochemical properties and behavior of materials of pharmaceutical interest in relation to product performance. The oral route is the most patient preferred for drug administration. The presence of a mucus layer that covers the entire gastrointestinal tract has been exploited to expand the use of the oral route by developing a mucoadhesive drug delivery system that showed a prolonged residence time. Alginic acid and sodium and potassium alginates have emerged as one of the most extensively explored mucoadhesive biomaterials owing to very good cytocompatibility and biocompatibility, biodegradation, sol-gel transition properties, and chemical versatility that make possible further modifications to tailor their properties. The present review overviews the most relevant applications of alginate microparticles and nanoparticles for drug administration by the oral route and discusses the perspectives of this biomaterial in the future.