Development of an Abuse- and Alcohol-Resistant Formulation Based on Hot-Melt Extrusion and Film Coating

Ethanol-induced dose dumping from sodium alginate matrix tablets: Investigation of the effects of medium viscosity and pH

In this work, the swelling and disintegration of drug-free sodium alginate (SA) compacts and the release of metformin HCl from SA matrix tablets were investigated in acidic media of different ethanol concentrations (0, 10, 20, and 40 % v/v), pH (1.2 and 4.5) and HPMC K4M concentrations (0-1 % w/v). The investigated dissolution media represented the consumption of different alcoholic beverages, the pH of fasted and fed states, and a range of viscosity resembling diluted homogenized FDA meal. The dissolution efficiency and the time to 50 % release (t_50%) were selected as release parameters. It was found that both ethanol concentration and medium pH affected drug release from SA matrix tablets and the swelling of SA compacts. Dose dumping occurred at high ethanol concentration (40 %) at both media pH with almost complete drug release within 15-30 min associated with rapid matrix disintegration. HPMC at 0.5-1 % concentrations increased the medium's viscosity, preventing dose dumping at high ethanol concentrations. Erosion and disintegration of SA compacts were decelerated by increasing HPMC concentration in hydroethanolic media in consonance with decreased release rate from matrix tablets. ANOVA tests showed significant effects of pH and concentrations of ethanol and HPMC in the dissolution medium on the release parameters.

A Comprehensive Review on Pellets as a Dosage Form in Pharmaceuticals

Oral route of administration is widely accepted and desired because of its versatility, convenience, and, most importantly, patient compliance. Multiparticulate systems like granules and pellets are more advantageous when compared to single-unit dosage forms, as they are capable of distributing the drug more evenly in the gastrointestinal tract. The current paper focuses on pellets, the merits and demerits associated, various pelletization techniques, and their characterization. It also focuses on how pellets can be employed for drug delivery is controlled and sustained release formulations. It gives a complete emphasis on the drug and excipients that can be used in pellet formation, the marketed formulations, and the research pertaining to pellets.

Overdose and Alcohol Sensitive Immediate Release System (OASIS) for Deterring Accidental Overdose or Abuse of Drugs

Death from an accidental or intentional overdose of sleeping tablets has increased exponentially in the USA. Furthermore, the simultaneous consumption of sleeping tablets with alcoholic beverages not only intensifies the effect of sleeping tablets but also leads to blackouts, sleepwalking, and death in many cases. In this article, we proposed a unique and innovative technology to prevent multi-tablet and alcohol-associated abuse of sleeping tablet. Agonist- and antagonist-loaded polymeric filaments of appropriate Eudragit® polymers were prepared using hot melt extrusion. Metoprolol tartrate and hydrochlorothiazide were used as model drugs in place of zolpidem tartrate (agonist-BCS class I) and flumazenil (antagonist-BCS class IV), respectively. Crushed filaments were converted into a tablet with a novel rapidly soluble co-processed alkalizing agent. Dissolution studies of single tablet and multiple tablets (5) in fasted state simulated gastric fluid (FaSSGF) confirmed that the release of the agonist was significantly (p < 0.0001) reduced in multi-tablet dissolution. Furthermore, the release of antagonist was significantly higher when tablet was exposed to FaSSGF+20% ethanol and various alcoholic beverages. Thus, appropriate use of Eudragit® polymer's chemistry could help design a tablet to prevent the release of agonist in case of overdose and simultaneous release of antagonist when consumed with alcohol.

Extended release pellets prepared by hot melt extrusion technique for abuse deterrent potential: Category-1 in-vitro evaluation

The objective of the present study was to develop extended-release (ER) hot-melt extruded (HME) abuse-deterrent pellets of acetaminophen, a model drug, by utilizing high molecular weight polyethylene oxide (PEO) and gelling agents (xanthan gum, guar gum, and gellan gum). The HME pellets were evaluated for their abuse-deterrence (AD) potential by Category-1 laboratory in-vitro evaluation parameters, including particle size reduction (PSR), small volume extraction, dissolution, viscosity, syringeability, and injectability. Further, the pellets were investigated for resistance to physical (crushing) and thermal (oven and microwave) manipulation to evaluate the strength of the AD properties. Physical manipulation studies demonstrated that the pellets were intact, extremely hard, and resistant to PSR and manipulation to bypass ER properties. Dissolution of all intact and physically manipulated pellets led to complete drug release within 8 h, and resistance to dose-dumping in 40% ethanol was observed. The drug extraction was <50% in 10 mL of ingestible and non-ingestible solvents under static, agitation, and thermal manipulation conditions with an incubation time of 30 min. The PEO/xanthan gum-based formulation showed higher viscosity, syringe and injection forces, and lower syringeable volume in all manipulation conditions compared with plain PEO pellets. These findings supported the AD potential of PEO and xanthan gum pellets against intravenous abuse.

Imaging of the Effect of Alcohol-Containing Media on the Performance of Hypromellose Hydrophilic Matrix Tablets: Comparison of Direct Compression and Regular Grades of Polymer

As the ingestion of drug products with alcohol could have adverse effects on the release of drugs from dosage forms, it is important to understand the mechanisms underpinning the influence on drug release by evaluating the effect of alcohol-containing media on the behaviour of pharmaceutical excipients. In this work, the effect of hydroalcoholic media containing up to 40% v/v absolute ethanol was evaluated, employing both the regular (CR) and direct compression grades (DC) of hypromellose. X-ray microtomography (XµT) and magnetic resonance imaging (MRI) were used as complementary techniques in determining the influence of the media composition on the ability of the CR and DC polymers to form and evolve the gel layer that controls drug release. Particle and powder properties of the polymer were characterised to determine any relationship to performance in hydroalcoholic media. Triboelectrification results showed the CR grade formulation to charge electropositively whereas the DC grade charged electronegatively. The flow properties also showed the DC grade to have a superior flow as compared to its CR counterpart. Differences in particle morphology between the grades influenced charging and flow behaviour of the powders; however, it did not seem to impact significantly either on the mechanical strength or the drug release properties of the compacted formulation using the model drug propranolol HCl. XµT and MRI imaging were successfully used as complementary techniques in determining the gel layer/hydration layer thickness measurements as the layer developed, as well as following ingress of hydroalcoholic media and its impact on the dry core. The result showed that although differences were present in the gel layer thickness potentially due to differences in particle morphology, this also did not impact significantly on the dissolution process, especially in acidic and hydroalcoholic media.

A Comparison Between Lab-Scale and Hot-Melt-Extruder-Based Anti-inflammatory Ointment Manufacturing

Hot-melt extrusion (HME) has been extensively investigated for continuous manufacturing of amorphous solid dispersions, to improve the solubility of poorly water-soluble drug substances, impart abuse deterrence to controlled substances, taste masking for pediatric and geriatric formulations and development of cocrystal system. Much research has been conducted on the continuous manufacturing of solid dosage forms using HME, but its applicability in the manufacturing of semisolids remains an unexplored domain. This study aimed to explore the applicability of HME in the continuous manufacturing of topical semi-solid formulations with two active pharmaceutical ingredients (APIs). Ointments containing a combination of triamcinolone acetonide and lidocaine hydrochloride were screened based on a quality target product profile (QTPP) and established critical quality attributes (CQAs) using design of experiments (DoE). Three selected formulations, manufactured by a lab-scale fusion method and HME, were subjected to further characterization studies including work of adhesion, stiffness, apparent pH, content uniformity, differential scanning calorimetry, accelerated stability, and in vitro drug release testing. Selected formulations met design characteristics and demonstrated the applicability of HME in the continuous manufacturing of semi-solid formulations. Graphical abstract.

An update on the contribution of hot-melt extrusion technology to novel drug delivery in the twenty-first century: part II

INTRODUCTION

Interest in hot-melt extrusion (HME) technology for novel applications is growing day by day, which is evident from several hundred publications within the last 5 years. HME is a cost-effective, solvent free, 'green' technology utilized for various formulations with low investment costs compared to conventional technologies. HME has also earned the attention of the pharmaceutical industry by the transformation of this technology for application in continuous manufacturing.

AREAS COVERED

Part II of the review focuses on various novel opportunities or innovations of HME such as multiple component systems (co-crystals, co-amorphous systems and salts), twin-screw granulation, semi-solids, co-extrusion, abuse deterrent formulations, solid self-emulsifying drug delivery systems, chronotherapeutic drug delivery systems, and miscellaneous applications.

EXPERT OPINION

HME is being investigated as an alternative technology for preparation of multicomponent systems such as co-crystals and co-amorphous techniques. Twin-screw granulation has gained increased interest in preparation of granules via twin-screw melt granulation or twin-screw dry granulation. This novel application of the HME process provides a promising alternate approach in the formulation of granules and solid dosage forms. However, this technology may need to be further investigated for scalability aspects of these novel applications for industrial production.

Recent Perspectives in Hot Melt Extrusion-Based Polymeric Formulations for Drug Delivery: Applications and Innovations

Hot melt extrusion (HME), a technology which mixing the advantages of solid dispersion technology and mechanical preparation, is accepted in varied applications in pharmaceutical formulations. When combined with other techniques, such as nanotechnique, three-dimensional printing, and co-extrusion, HME becomes much more multifunctional in the application of drug delivery. While in most cases, polymers employed in HME are responsible for the final property of products. The process of HME together with the selection of materials employed in HME were described briefly. In addition, the applications of HME in drug delivery and its currently status in the pharmaceutical field were also included. Some commercial products produced by HME have met the approval of FDA, indicating the commercial viability of this technique. Although showing great potential in pharmaceutical manufacturing, HME is still challenged by high temperature, shear force, and high input energy. Development of equipment, modifying the parameters, and optimization of polymeric formulations are needed for a safe, effective, and multifunctional hot melt extrusion drug delivery system. Also, wider range of combinations between HME and other techniques may provide guideline for developing multiple applications in drug delivery.

The influence of hydroalcoholic media on the performance of Grewia polysaccharide in sustained release tablets

Co-administration of drugs with alcohol can affect the plasma concentration of drugs in patients. It is also known that the excipients used in the formulation of drugs may not always be resistant to alcohol. This study evaluates effect of varying alcohol concentrations on theophylline release from two grades of Grewia mollis polysaccharides. X-ray microtomography showed that native polysaccharide formulation compacts were not homogenous after the mixing process resulting in its failure in swelling studies. Removal of starch from the native polysaccharide resulted in homogenous formulation compacts resistant to damage in high alcoholic media in pH 6.8 (40%v/v absolute ethanol). Destarched polymer compacts had a significantly higher hardness (375N) than that of the native polysaccharide (82N) and HPMC K4M (146N). Dissolution studies showed similarity at all levels of alcohol tested (f₂=57-91) in simulated gastric media (pH 1.2). The dissolution profiles in the simulated intestinal fluids were also similar (f₂=60-94), with the exception of the native polysaccharide in pH 6.8 (40%v/v absolute ethanol) (f₂=43). This work highlights the properties of Grewia polysaccharide as a matrix former that can resist high alcoholic effects therefore; it may be suitable as an alternative to some of the commercially available matrix formers with wider applications for drug delivery as a cheaper alternative in the developing world.

Overview and Future Potential of Buccal Mucoadhesive Films as Drug Delivery Systems for Biologics

The main route of administration for drug products is the oral route, yet biologics are initially developed as injectables due to their limited stability through the gastrointestinal tract and solubility issues. In order to avoid injections, a myriad of investigations on alternative administration routes that can bypass enzymatic degradation and the first-pass effect are found in the literature. As an alternative site for biologics absorption, the buccal route presents with a number of advantages. The buccal mucosa is a barrier, providing protection to underlying tissue, but is more permeable than other alternative routes such as the skin. Buccal films are polymeric matrices designed to be mucoadhesive properties and usually formulated with permeability enhancers to improve bioavailability. Conventionally, buccal films for biologics are manufactured by solvent casting, yet recent developments have shown the potential of hot melt extrusion, and most recently ink jet printing as promising strategies. This review aims at depicting the field of biologics-loaded mucoadhesive films as buccal drug delivery systems. In light of the literature available, the buccal epithelium is a promising route for biologics administration, which is reflected in clinical trials currently in progress, looking forward to register and commercialize the first biologic product formulated as a buccal film.