Solubility and Thermodynamic Analysis of Antihypertensive Agent Nitrendipine in Different Pure Solvents at the Temperature Range of 298.15 to 318.15°K

Solubilization and Thermodynamic Analysis of Isotretinoin in Eleven Different Green Solvents at Different Temperatures

The solubilization and thermodynamic analysis of isotretinoin (ITN) in eleven distinct green solvents, such as water, methyl alcohol (MeOH), ethyl alcohol (EtOH), 1-butyl alcohol (1-BuOH), 2-butyl alcohol (2-BuOH), ethane-1,2-diol (EG), propane-1,2-diol (PG), polyethylene glycol-400 (PEG-400), ethyl acetate (EA), Transcutol-HP (THP), and dimethyl sulfoxide (DMSO) was studied at several temperatures and a fixed atmospheric pressure. The equilibrium approach was used to measure the solubility of ITN, and the Apelblat, van’t Hoff, and Buchowski−Ksiazczak λh models were used to correlate the results. The overall uncertainties were less than 5.0% for all the models examined. The highest ITN mole fraction solubility was achieved as 1.01 × 10−1 in DMSO at 318.2 K; however, the least was achieved as 3.16 × 10−7 in water at 298.2 K. ITN solubility was found to be enhanced with an increase in temperature and the order in which it was soluble in several green solvents at 318.2 K was as follows: DMSO (1.01 × 10−1) > EA (1.73 × 10−2) > PEG-400 (1.66 × 10−2) > THP (1.59 × 10−2) > 2-BuOH (6.32 × 10−3) > 1-BuOH (5.88 × 10−3) > PG (4.83 × 10−3) > EtOH (3.51 × 10−3) > EG (3.49 × 10−3) > MeOH (2.10 × 10−3) > water (1.38 × 10−6). ITN−DMSO showed the strongest solute−solvent interactions when compared to the other ITN and green solvent combinations. According to thermodynamic studies, ITN dissolution was endothermic and entropy-driven in all of the green solvents tested. The obtained outcomes suggested that DMSO appears to be the best green solvent for ITN solubilization.

Solubility and Thermodynamic Data of Febuxostat in Various Mono Solvents at Different Temperatures

This study examines the solubility and thermodynamics of febuxostat (FBX) in a variety of mono solvents, including “water, methanol (MeOH), ethanol (EtOH), isopropanol (IPA), 1-butanol (1-BuOH), 2-butanol (2-BuOH), ethylene glycol (EG), propylene glycol (PG), polyethylene glycol-400 (PEG-400), ethyl acetate (EA), Transcutol-HP (THP), and dimethyl sulfoxide (DMSO)” at 298.2−318.2 K and 101.1 kPa. The solubility of FBX was determined using a shake flask method and correlated with “van’t Hoff, Buchowski-Ksiazczak λh, and Apelblat models”. The overall error values for van’t Hoff, Buchowski-Ksiazczak λh, and Apelblat models was recorded to be 1.60, 2.86, and 1.14%, respectively. The maximum mole fraction solubility of FBX was 3.06 × 10−2 in PEG-400 at 318.2 K, however the least one was 1.97 × 10−7 in water at 298.2 K. The FBX solubility increased with temperature and the order followed in different mono solvents was PEG-400 (3.06 × 10−2) > THP (1.70 × 10−2) > 2-BuOH (1.38 × 10−2) > 1-BuOH (1.37 × 10−2) > IPA (1.10 × 10−2) > EtOH (8.37 × 10−3) > EA (8.31 × 10−3) > DMSO (7.35 × 10−3) > MeOH (3.26 × 10−3) > PG (1.88 × 10−3) > EG (1.31 × 10−3) > water (1.14 × 10−6) at 318.2 K. Compared to the other combinations of FBX and mono solvents, FBX-PEG-400 had the strongest solute-solvent interactions. The apparent thermodynamic analysis revealed that FBX dissolution was “endothermic and entropy-driven” in all mono solvents investigated. Based on these findings, PEG-400 appears to be the optimal co-solvent for FBX solubility.

Thermodynamic Solubility Profile of Temozolomide in Different Commonly Used Pharmaceutical Solvents

The solubility parameters, and solution thermodynamics of temozolomide (TMZ) in 10 frequently used solvents were examined at five different temperatures. The maximum mole fraction solubility of TMZ was ascertained in dimethyl sulfoxide (1.35 × 10⁻²), followed by that in polyethylene glycol-400 (3.32 × 10⁻³) > Transcutol^® (2.89 × 10⁻³) > ethylene glycol (1.64 × 10⁻³) > propylene glycol (1.47 × 10⁻³) > H₂O (7.70 × 10⁻⁴) > ethyl acetate (5.44 × 10⁻⁴) > ethanol (1.80 × 10⁻⁴) > isopropyl alcohol (1.32 × 10⁻⁴) > 1-butanol (1.07 × 10⁻⁴) at 323.2 K. An analogous pattern was also observed for the other investigated temperatures. The quantitated TMZ solubility values were regressed using Apelblat and Van’t Hoff models and showed overall deviances of 0.96% and 1.33%, respectively. Apparent thermodynamic analysis indicated endothermic, spontaneous, and entropy-driven dissolution of TMZ in all solvents. TMZ solubility data may help to formulate dosage forms, recrystallize, purify, and extract/separate TMZ.

Development and optimization of nanoemulsion based gel for enhanced transdermal delivery of nitrendipine using box-behnken statistical design

Objective: The purpose of present research was to develop and statistically optimize nitrendipine nanoemulsion gel for transdermal delivery using box-behnken statistical design.Method: The nanoemulsion formulations bearing nitrendipine were prepared by application of ternary phase diagram and spontaneous emulsification method. Box-behnken design was employed for the optimization of nitrendipine loaded nanoemulsion. The independent variables were oil, surfactant and co-surfactant while globule size, drug content and zeta potential were dependent variables. The optimized nanoemulsion formulation was incorporated into gel and evaluated for in-vitro release, ex-vivo permeation studies, confocal laser scanning microscopy, skin irritation and histopathological studies.Results: The optimized formulation through box-behnken statistical design showed globule size of 20.43 ± 1.50 nm, drug content of 97.05 ± 1.77% and zeta potential of -15.45 ± 0.35 mV. The ex-vivo study confirmed the enhanced delivery of nitrendipine from nanoemulsion gel than compare to drug solution by virtue of better permeation and solubility. Nanoemulsion gel was proved significantly superior by confocal laser scanning microscopy for satisfactory permeation and distribution of gel, deep into the rat skin. The optimized gel was found with no allergic dermal effects and was proved safe by histopathological studies for transdermal application.Conclusions: Results reveals that developed nitrendipine nanoemulsion gel overcomes the limitation of low penetration and accentuate permeation through albino Wistar rat skin. It was concluded that nanoemulsion gel could be utilized as a potential carrier for transdermal delivery of nitrendipine.

Solubility measurement, Hansen solubility parameters and solution thermodynamics of gemfibrozil in different pharmaceutically used solvents

Gemfibrozil (GEM) is cholesterol-lowering agent which is being proposed as poorly water soluble drug (PWSD). Temperature based solubility values of GEM are not yet available in literature or any pharmacopoeia/monograph. Hence, the present studies were carried out to determine the solubility of PWSD GEM (as mole fraction) in various pharmaceutically used solvents such as water (H₂O), methanol (MeOH), ethanol (EtOH), isopropanol (IPA), 1-butanol (1-BuOH), 2-butanol (2-BuOH), ethylene glycol (EG), propylene glycol (PG), polyethylene glycol-400 (PEG-400), ethyl acetate (EA), dimethyl sulfoxide (DMSO) and Transcutol^® (THP) at the temperatures ranging from T = 298.2 K-318.2 K under atmospheric pressure P = 0.1 MPa. Equilibrium/experimental solubilities of GEM were recorded by applying a saturation shake flask methodology and regressed using 'van't Hoff and Apelblat models'. Hansen solubility parameters for GEM and various pharmaceutically used solvents were estimated using HSPiP software. The solid states of GEM (both in pure and equilibrated states) were studied by 'Differential Scanning Calorimetry' which confirmed no transformation of GEM after equilibrium. Experimental solubilities of GEM in mole fraction were observed maximum in THP (1.81 × 10^-1) followed by DMSO, PEG-400, EA, 1-BuOH, 2-BuOH, IPA, EtOH, PG, MeOH, EG and H₂O (3.24 × 10^-6) at T = 318.2 K and similar tendencies were also recorded at T = 298.2 K, T = 303.2 K, T = 308.2 K and T = 313.2 K. 'Apparent thermodynamic analysis' on experimental solubilities furnished 'endothermic and entropy-driven dissolution' of GEM in each pharmaceutically used solvent.

Solubilization and determination of solution thermodynamic properties of itraconazole in different solvents at different temperatures

The solubility of itraconazole (ITRA) in thirteen pure solvents including water, dimethyl sulphoxide, acetonitrile, methanol, 1,4-butanediol, ethanol, isopropyl alcohol, n-butanol, octanol, ethyl acetate, toluene, benzene, 1,4-dioxane were estimated at the temperatures ranging from 293.15 K to 318.15 K under atmospheric pressure (0.1 MPa). The results reflected that the solubility of ITRA was a function of temperature and was increased with a rise in temperature in each solvent. Moreover, the solubility in polar solvents was less and found to be increased in non-polar solvents. Furthermore, the results of solubilization were correlated by the Van't Hoff equation, the modified Apelblat equation, the Buchowski - Ksiazaczak λh equation, and the polynomial empirical equation. The polynomial empirical equation proved to be more accurate and suitable for the correlation of solubilities of ITRA in studied solvents at various temperatures. Besides, theoretical ideal solubilities, activity coefficients, and thermodynamic properties of the solution process including standard molar enthalpy, entropy, Gibbs free energy, and excess enthalpy were calculated from the experimental solubility data. These thermodynamic parameters indicated that the solubilization process was not spontaneous, endothermic, and enthalpy driven. Such thermodynamic based solubility data of ITRA will be of immense help in solubilization, synthesis, process development, preformualtion, and dosage form development in pharmaceuticals.

Solubility determination of raloxifene hydrochloride in ten pure solvents at various temperatures: Thermodynamics-based analysis and solute-solvent interactions

The purpose of the present study was to determine the solubility of raloxifene hydrochloride (RHCl) in ten solvents: water, ethanol, isopropyl alcohol (IPA), ethylene glycol (EG), propylene glycol (PG), polyethylene glycol-400 (PEG-400), Transcutol, 1-butanol, dimethyl sulfoxide (DMSO), and ethyl acetate (EA) at temperatures of 298.2-323.2 K and a pressure of 0.1 MPa. The solubility data obtained was fitted upon "Apelblat and Van't Hoff" equations. The maximum mole fraction solubility of RHCl was obtained in DMSO (5.02 × 10^-2 at 323.2 K), followed by PEG-400 (5.92 × 10^-3 at 323.2 K), EA (3.11 × 10^-3 at 323.2 K), Transcutol (1.22 × 10^-3 at 323.2 K), PG (2.19 × 10^-4 at 323.2 K), 1-butanol (1.96 × 10^-4 at 323.2 K), IPA (1.47 × 10^-4 at 323.2 K), ethanol (7.90 × 10^-5 at 323.2 K), EG (6.65 × 10^-5 at 323.2 K), and water (3.60 × 10^-5 at 323.2 K). Similar fashions were noticed at each studied temperature. The higher solubility of RHCl in DMSO, PEG-400, EA, and Transcutol was possibly referable to their lower polarity in comparison with water. The molecular interactions between the solute and solvent molecules were estimated by calculating parameters like activity coefficients, and more prominent solute-solvent molecular interactions were noted for RHCl-DMSO, RHCl-EA, and RHCl-PEG-400 in comparison with the other solute-solvent combinations. The outcomes of the "apparent thermodynamic analysis" showed that the dissolution of RHCl was "endothermic, spontaneous and entropy-driven" in all investigated solvents. The obtained solubility data of RHCl in commonly used solvents could be useful in the purification, recrystallization, and dosage form design of the drug.