Characterization of silicone elastomer vaginal rings containing HIV microbicide TMC120 by Raman spectroscopy

Two into one does go: Formulation development of a multipurpose combination vaginal ring releasing dapivirine and metronidazole for prevention of HIV infection and treatment of bacterial vaginosis

Bacterial vaginosis (BV) is a common but often asymptomatic dysbiosis of the human vagina characterized by an imbalance in the normal vaginal microbiota due to loss of lactobacilli and an overgrowth of certain anaerobic bacteria. While BV itself is not a sexually transmitted infection, it is associated with an increased risk in women of various sexually acquired infections, including human immunodeficiency virus (HIV) infection. There is, therefore, a strong rationale for pursuing new multipurpose products that seek to treat or prevent BV alongside preventing HIV infection. With the dapivirine-releasing vaginal ring for HIV prevention now approved in several African countries, here we report formulation development of a next-generation ring product that releases both dapivirine (DPV) and the antibiotic drug metronidazole (MET). Following thermal analysis studies to characterize the phase behaviour of DPV-MET mixtures and rheological analysis to assess the cure characteristics of the active silicone elastomer mixes, matrix-type rings were manufactured containing 25 or 200 mg DPV in combination with 100, 250, 500, 1000 or 2000 mg MET. The results for drug content, in vitro release, mechanical testing, and Gardnerella vaginalis time-kill experiments demonstrate the feasibility of incorporating both DPV and MET in a matrix-type ring formulation and indicate that clinically effective release rates may be possible.

Development of an intravaginal ring for the topical delivery of Aurora kinase A inhibitor, MLN8237

Human papilloma virus (HPV) is the main culprit in cervical cancers. Although the HPV vaccine is now available, the slow and gradual process for HPV cancers to form means little will change, even for vaccinated individuals. This warrants the development of new therapeutic strategies in both the newly diagnosed and recurrent patients. We have previously shown that Alisertib (MLN8237), an Aurora A kinase inhibitor, potently and selectively kills HPV-positive cervical cancer cells. However, Alisertib is known for its unfavorable side effects when administered systemically. A targeted delivery approach is therefore warranted. The topical delivery of drugs to the cervix for the treatment of cervical cancer is an underexplored area of research that has the potential to significantly improve therapeutic outcome. Here, we design a novel topical drug delivery system for localized delivery in the vaginal tract using intravaginal silicone rings loaded with Alisertib. We assessed the suitability of the drug for the application and delivery method and develop a high-performance liquid chromatography method, then show that the vaginal rings were effective at releasing Alisertib over an extended period of time. Furthermore, we showed that Alisertib-loaded vaginal rings did not induce overt inflammation in the mouse vaginal tract. Our work has major translational implications for the future development of vaginal ring devices for the topical treatment of cervical cancer.

Packing Polymorphism of Dapivirine and Its Impact on the Performance of a Dapivirine-Releasing Silicone Elastomer Vaginal Ring

A silicone elastomer vaginal ring providing sustained release over 28 days of the anti-retroviral microbicide dapivirine has recently completed phase III clinical testing and showed moderate protection against HIV acquisition. In support of the product licensure program, we report the impact of dapivirine packing polymorphism on the thermal and solubility characteristics of dapivirine and on the in vitro performance of the 25 mg dapivirine ring product. This is the first time that polymorphism has been reported for a drug-releasing vaginal ring product. Thermal, particle size, powder X-ray diffraction, and thermodynamic solubility analyses of dapivirine polymorphic forms I and IV, both of which are persistent at room temperature and with form I being the thermodynamically stable form, were conducted for both micronized and non-micronized materials. No significant differences in solubility between DPV forms I and IV were observed in media commonly used for in vitro release testing. Matrix-type silicone elastomer vaginal rings were manufactured and the impact of dapivirine polymorphism on key in vitro parameters (compression and tensile behavior; content assay; in vitro release; residual content assay) was investigated. The data demonstrate that dapivirine packing polymorphism has no significant impact on in vitro performance of the 25 mg dapivirine vaginal ring.

Label-Free Measurements of Tenofovir Diffusion Coefficients in a Microbicide Gel Using Raman Spectroscopy

Confocal Raman spectroscopy was implemented in a new label-free technique to quantify molecular diffusion coefficients within gels. A leading anti-HIV drug, tenofovir, was analyzed in a clinical microbicide gel. The gel was tested undiluted, and in 10%-50% wt/wt dilutions with vaginal fluid simulant to capture the range of conditions likely occurring in vivo. The concentration distributions of tenofovir in gel over time and space were measured and input to a mathematical diffusion model to deduce diffusion coefficients. These were 3.16 ± 0.11 × 10^-6 cm²/s in undiluted gel, and increased by 11%-46% depending on the extent of dilution. Results were interpreted with respect to traditional release rate measurements in devices such as Franz cells. This comparison highlighted an advantage of our assay in that it characterizes the diffusive barrier within the gel material itself; in contrast, release rate in the traditional assay is affected by external conditions, such as drug partitioning at the gel/liquid sink interface. This new assay is relevant to diffusion in polymeric hydrogels over pharmacologically relevant length scales, for example, those characteristic of topical drug delivery. Resulting transport parameters are salient measures of drug delivery potential, and serve as inputs to computational models of drug delivery performance.

Past, Present, and Future Drug Delivery Systems for Antiretrovirals

The human immunodeficiency virus has infected millions of people and the epidemic continues to grow rapidly in some parts of the world. Antiretroviral (ARV) therapy has provided improved treatment and prolonged the life expectancy of patients. Moreover, there is growing interest in using ARVs to protect against new infections. Hence, ARVs have emerged as our primary strategy in combating the virus. Unfortunately, several challenges limit the optimal performance of these drugs. First, ARVs often require life-long use and complex dosing regimens. This results in low patient adherence and periods of lapsed treatment manifesting in drug resistance. This has prompted the development of alternate dosage forms such as vaginal rings and long-acting injectables that stand to improve patient adherence. Another problem central to therapeutic failure is the inadequate penetration of drugs into infected tissues. This can lead to incomplete treatment, development of resistance, and viral rebound. Several strategies have been developed to improve drug penetration into these drug-free sanctuaries. These include encapsulation of drugs in nanoparticles, use of pharmacokinetic enhancers, and cell-based drug delivery platforms. In this review, we discuss issues surrounding ARV therapy and their impact on drug efficacy. We also describe various drug delivery-based approaches developed to overcome these issues.

Microbicide vaginal rings: Technological challenges and clinical development

Vaginal rings (VRs) are flexible, torus-shaped, polymeric devices designed to sustain delivery of pharmaceutical drugs to the vagina for clinical benefit. Following first report in a 1970 patent application, several steroid-releasing VR products have since been marketed for use in hormone replacement therapy and contraception. Since 2002, there has been growing interest in the use of VR technology for delivery of drugs that can reduce the risk of sexual acquisition of human immunodeficiency virus type 1 (HIV-1), the causative agent of acquired immunodeficiency syndrome (AIDS). Although no vaginally-administered product has yet been approved for HIV reduction/prevention, extensive research efforts are continuing and a number of VR devices offering sustained release of so-called 'HIV microbicide' compounds are currently being evaluated in late-stage clinical studies. This review article provides an overview of the published scientific literature within this important field of research, focusing primarily on articles published within peer-reviewed journal publications. Many important aspects of microbicide-releasing VR technology are discussed, with a particular emphasis on the technological, manufacturing and clinical challenges that have emerged in recent years.

Recent advances on anti-HIV vaginal delivery systems development

A review of the recent outcomes regarding technologies to prevent vaginal transmission of HIV, mainly by using antiretroviral (ARV) drugs formulated as microbicides. An introduction about the HIV transmission mechanisms by the vaginal route is included, together with the recent challenges faced for development of successful microbicide products. The outcomes of clinical evaluations are mentioned, and the different formulation strategies studied to-date, with the requirements, advantages, disadvantages and limitations of each dosage-form type, are presented. Finally, the recent attempts to apply various types of nanotechnologies in order to develop advanced microbicide-products and overcome existing limitations, are discussed.

Microbicides for the Treatment of Sexually Transmitted HIV Infections

Approximately 34 million people were living with human immunodeficiency virus (HIV-1) at the end of 2011. From the last two decades, researchers are actively involved in the development of an effective HIV-1 treatment, but the results intended are still doubtful about the eradication of HIV. The HIV-1 virus has gone from being an "inherently untreatable" infectious agent to the one liable to be affected by a range of approved therapies. Candidate microbicides have been developed to target specific steps in the process of viral transmission. Microbicides are self-administered agents that can be applied to vaginal or rectal mucosal surfaces with the aim of preventing, or reducing, the transmission of sexually transmitted infections (STIs) including HIV-1. The development of efficient, widely available, and low-cost microbicides to prevent sexually transmitted HIV infections should be given high priority. In this review, we studied the various forms of microbicides, their mechanism of action, and their abundant approaches to control the transmission of sexually transmitted infections (STIs).

Quantitative analysis of microbicide concentrations in fluids, gels and tissues using confocal Raman spectroscopy

Topical vaginal anti-HIV microbicides are an important focus in female-based strategies to prevent the sexual transmission of HIV. Understanding microbicide pharmacokinetics is essential to development, characterization and implementation of efficacious microbicide drug delivery formulations. Current methods to measure drug concentrations in tissue (e.g., LC-MS/MS, liquid chromatography coupled with tandem mass spectrometry) are highly sensitive, but destructive and complex. This project explored the use of confocal Raman spectroscopy to detect microbicide drugs and to measure their local concentrations in fluids, drug delivery gels, and tissues. We evaluated three candidate microbicide drugs: tenofovir, Dapivirine and IQP-0528. Measurements were performed in freshly excised porcine buccal tissue specimens, gel vehicles and fluids using two Horiba Raman microscopes, one of which is confocal. Characteristic spectral peak calibrations for each drug were obtained using serial dilutions in the three matrices. These specific Raman bands demonstrated strong linear concentration dependences in the matrices and were characterized with respect to their unique vibrational signatures. At least one specific Raman feature was identified for each drug as a marker band for detection in tissue. Sensitivity of detection was evaluated in the three matrices. A specific peak was also identified for tenofovir diphosphate, the anti-HIV bioactive product of tenofovir after phosphorylation in host cells. Z-scans of drug concentrations vs. depth in excised tissue specimens, incubated under layers of tenofovir solution in a Transwell assay, showed decreasing concentration with depth from the surface into the tissue. Time-dependent concentration profiles were obtained from tissue samples incubated in the Transwell assay, for times ranging 30 minutes - 6 hours. Calibrations and measurements from tissue permeation studies for tenofovir showed good correlation with gold standard LC-MS/MS data. These results demonstrate that confocal Raman spectroscopy holds promise as a tool for practical, minimally invasive, label-free measurement of microbicide drug concentrations in fluids, gels and tissues.

Partial protection against multiple RT-SHIV162P3 vaginal challenge of rhesus macaques by a silicone elastomer vaginal ring releasing the NNRTI MC1220

OBJECTIVES

The non-nucleoside reverse transcriptase inhibitor MC1220 has potent in vitro activity against HIV type 1 (HIV-1). A liposome gel formulation of MC1220 has previously been reported to partially protect rhesus macaques against vaginal challenge with a simian HIV (SHIV). Here, we describe the pre-clinical development of an MC1220-releasing silicone elastomer vaginal ring (SEVR), including pharmacokinetic (PK) and efficacy studies in macaques.

METHODS

In vitro release studies were conducted on SEVRs loaded with 400 mg of MC1220, using simulated vaginal fluid (SVF, n = 4) and 1 : 1 isopropanol/water (IPA/H(2)O, n = 4) as release media. For PK evaluation, SEVRs were inserted into adult female macaques (n = 6) for 30 days. Following a 1 week washout period, fresh rings were placed in the same animals, which were then challenged vaginally with RT-SHIV162P3 once weekly for 4 weeks.

RESULTS

SEVRs released 1.66 and 101 mg of MC1220 into SVF and IPA/H(2)O, respectively, over 30 days, the differential reflecting the low aqueous solubility of the drug. In macaque PK studies, MC1220 was consistently detected in vaginal fluid (peak 845 ng/mL) and plasma (peak 0.91 ng/mL). Kaplan-Meier analysis over 9 weeks showed significantly lower infection rates for animals given MC1220-containing SEVRs than placebo rings (hazard ratio 0.20, P = 0.0037).

CONCLUSIONS

An MC1220-releasing SEVR partially protected macaques from vaginal challenge. Such ring devices are a practical method for providing sustained, coitally independent protection against vaginal exposure to HIV-1.

Future strategies in microbicide development

The reduction in human immunodeficiency virus (HIV) infection in women demonstrated by pericoital use of tenofovir gel has encouraged the continued development of microbicides. Novel approaches include new ways to deliver tenofovir, as well as products that contain different antiretroviral drugs, either as single agents or as combinations of antiretroviral drugs. Indeed, emphasis has renewed on the development of multipurpose prevention technologies, products designed to address multiple sexually transmitted infections. Dual-purpose contraceptive antiretroviral products are also being designed to prevent HIV and pregnancy. Since consistent and correct use of these products will be critical to their effectiveness, the active pharmaceutical ingredients must be delivered in acceptable vaginal dosage forms, such as gels, films and sustained-release vaginal rings. The development of different dosage forms will help ensure that women can find a method to protect themselves from HIV, pregnancy, and potentially other sexually transmitted infections.

Mechanisms of burst release from pH-responsive polymeric microparticles

OBJECTIVES

Microencapsulation of drugs into preformed polymers is commonly achieved through solvent evaporation techniques or spray drying. We compared these encapsulation methods in terms of controlled drug release properties of prepared microparticles and investigated the underlying mechanisms responsible for the 'burst release' effect.

METHODS

Using two different pH-responsive polymers with a dissolution threshold of pH 6 (Eudragit L100 and AQOAT AS-MG), hydrocortisone, a model hydrophobic drug, was incorporated into microparticles below and above its solubility within the polymer matrix.

KEY FINDINGS

Although, spray drying was an attractive approach due to rapid particle production and relatively low solvent waste, the oil-in-oil microencapsulation method was superior in terms of controlled drug release properties from the microparticles. Slow solvent evaporation during the oil-in-oil emulsification process allowed adequate time for drug and polymer redistribution in the microparticles and reduced uncontrolled drug burst release. Electron microscopy showed that this slower manufacturing procedure generated nonporous particles whereas thermal analysis and X-ray diffractometry showed that drug loading above the solubility limit of the drug in the polymer generated excess crystalline drug on the surface of the particles. Raman spectral mapping illustrated that drug was homogeneously distributed as a solid solution in the particles when loaded below saturation in the polymer with consequently minimal burst release.

CONCLUSIONS

Both the manufacturing method (which influenced particle porosity and density) and drug:polymer compatibility and loading (which affected drug form and distribution) were responsible for burst release seen from our particles.

Raman mapping of pharmaceuticals

Raman spectroscopy may be implemented through a microscope to provide fine scale axial and lateral chemical maps. The molecular structure of many drugs makes Raman spectroscopy particularly well suited to the investigation of pharmaceutical systems. Chemometric methods currently used to assess bulk Raman spectroscopic data are typically applied to Raman mapping data from pharmaceuticals; few reports exist where the spatial information inherent to a mapped dataset is used for the calculation of chemical maps. Both univariate and multivariate methods have been applied to Raman mapping data to determine the distribution of active pharmaceutical ingredients (APIs) in tablets, solid dispersions for increased solubility and controlled release devices. The ability to axially (depth) profile using Raman mapping has been used in studies of API penetration through membranes, cellular uptake of drug delivery liposomes, and initial API distribution and subsequent elution from coatings of medical devices. New instrumental developments will increase the efficiency of Raman mapping and lead to greater utilisation of Raman mapping for analyses of pharmaceutical systems.

Inhibition of human immunodeficiency virus type 1 infection by the candidate microbicide dapivirine, a nonnucleoside reverse transcriptase inhibitor

Heterosexual transmission of human immunodeficiency virus (HIV) remains the major route of infection worldwide; thus, there is an urgent need for additional prevention strategies, particularly strategies that could be controlled by women, such as topical microbicides. Potential microbicide candidates must be both safe and effective. Using cellular and tissue explant models, we have evaluated the activity of the nonnucleoside reverse transcriptase inhibitor (NNRTI) dapivirine as a vaginal microbicide. In tissue compatibility studies, dapivirine was well tolerated by epithelial cells, T cells, macrophages, and cervical tissue explants. Dapivirine demonstrated potent dose-dependent inhibitory effects against a broad panel of HIV type 1 isolates from different clades. Furthermore, dapivirine demonstrated potent activity against a wide range of NNRTI-resistant isolates. In human cervical explant cultures, dapivirine was able not only to inhibit direct infection of mucosal tissue but also to prevent the dissemination of the virus by migratory cells. Activity was retained in the presence of semen or a cervical mucus simulant. Furthermore, dapivirine demonstrated prolonged inhibitory effects: it was able to prevent both localized and disseminated infection for as long as 6 days posttreatment. The prolonged protection observed following pretreatment of genital tissue and the lack of observable toxicity suggest that dapivirine has considerable promise as a potential microbicide candidate.

Raman characterization and chemical imaging of biocolloidal self-assemblies, drug delivery systems, and pulmonary inhalation aerosols: a review

This review presents an introduction to Raman scattering and describes the various Raman spectroscopy, Raman microscopy, and chemical imaging techniques that have demonstrated utility in biocolloidal self-assemblies, pharmaceutical drug delivery systems, and pulmonary research applications. Recent Raman applications to pharmaceutical aerosols in the context of pulmonary inhalation aerosol delivery are discussed. The "molecular fingerprint" insight that Raman applications provide includes molecular structure, drug-carrier/excipient interactions, intramolecular and intermolecular bonding, surface structure, surface and interfacial interactions, and the functional groups involved therein. The molecular, surface, and interfacial properties that Raman characterization can provide are particularly important in respirable pharmaceutical powders, as these particles possess a higher surface-area-to-volume ratio; hence, understanding the nature of these solid surfaces can enable their manipulation and tailoring for functionality at the nanometer level for targeted pulmonary delivery and deposition. Moreover, Raman mapping of aerosols at the micro- and nanometer level of resolution is achievable with new, sophisticated, commercially available Raman microspectroscopy techniques. This noninvasive, highly versatile analytical and imaging technique exhibits vast potential for in vitro and in vivo molecular investigations of pulmonary aerosol delivery, lung deposition, and pulmonary cellular drug uptake and disposition in unfixed living pulmonary cells.