Anterior clinoidectomy and opening of the internal auditory canal using an ultrasonic bone curette

Piezoelectric ear surgery: a systematic review

BACKGROUND

The piezoelectric instrument (PEI) offers a novel technique for bone removal in ear surgery with a combination of micro-oscillation and cavitation. The aim of this review is to explore the advantages, disadvantages, and limitations of this instrument in comparison to the drill.

MATERIALS AND METHODS

We conducted a search of PubMed/MEDLINE and Google Scholar in accordance with the PRISMA recommendations. The primary selection included all studies reporting on the use of PEI in ear surgery or its effect on the inner ear. Only studies with a control group were included in the secondary selection.

RESULTS

The first search identified 49 studies between 2003 and 2022. These reported on a total of 1162 ear operations, during which PEI was used for various indications. Most data were based on uncontrolled retrospective studies or case reports (76%). Only one of the five controlled clinical studies was prospective and randomized. The advantages of PEI weighed against its limitations and disadvantages were critically analyzed in comparison to the drill.

CONCLUSION

Piezoelectric surgery is an innovative and promising surgical technique in the temporal bone. PEI appears to enable safer and more precise bone removal in close proximity to soft tissue when compared to the drill. The slower bone removal and cost factors represent current limitations to its wider use in ear surgery.

Thermal Analysis of an Ultrasonic Aspirator Micro Claw Tool Compared With Standard High-Speed Drilling During Internal Auditory Canal Opening in a Cadaveric Model

BACKGROUND

The ultrasonic aspirator micro claw tool (UAmCT) can be used to remove the bone of the internal auditory canal (IAC) during vestibular schwannoma resection via the retrosigmoid approach (RSA) without the risk of a spinning drill shaft. However, the thermal profile of the UAmCT during IAC removal has not been reported.

OBJECTIVE

To compare the thermal profile of the UAmCT during access of the IAC to that of a conventional high-speed drill (HSD) and to present an illustrative case of this application.

METHODS

IAC opening via RSA was performed in 5 embalmed cadaveric specimens using the UAmCT with 3, 8, and 15 mL/min irrigation on the left and the HSD at 75 000 revolutions per minute and 0%, 14%, and 22% irrigation on the right. Peak bone surface temperatures were measured 4 times in 20-second intervals, and statistical analyses were performed using SPSS software. An illustrative case of a vestibular schwannoma resected via an RSA using the UAmCT to access the IAC is presented.

RESULTS

The IAC was opened in all 5 specimens using both the UAmCT and HSD without complication. The mean peak bone surface temperatures were significantly lower with the UAmCT compared with the HSD ( P < .001). The UAmCT did not meaningfully prolong the operating time in the illustrative case, and the IAC was accessed without complication.

CONCLUSION

The UAmCT may be a safe and effective alternative to HSD for IAC opening during vestibular schwannoma resection via the RSA. Larger studies under clinical conditions are required to further validate these findings.

Use of BoneScalpel Ultrasonic Bone Dissector in Anterior Clinoidectomy and Posterior Fossa Surgery: Technical Note

BackgroundFirst popularized by Dolenc, anterior clinoidectomies were performed with rongeurs, before the adoption of modern high-speed drills. We describe a novel application of the piezoelectric BoneScalpel™ in anterior skull base and posterior fossa surgeries. In the literature, to date, there are no mentions of anterior clinoidectomies performed with piezosurgical devices.MethodsWe reported a total of 12 patients, 8 affected by posterior fossa tumors and 4 treated for anterior skull base oncologic and vascular pathologies. This study aims to assess the safety and efficacy of the piezoelectric osteotomy in skull base and posterior fossa surgeries. In all patients, an ultrasonic bone dissector (BoneScalpel™ - Misonix) was used to perform the anterior clinoidectomy (AC) and craniotomy.ResultsA successful clinoidectomy was performed in 4 out of 12 patients (33.3%). We did not notice any heat damage to the surrounding soft tissue in critical areas such as paraclinoid structures. We documented only one durotomy in an oncologic patient, while no lesions of SSS or TS were detected.We recorded only a slightly increased surgery duration in the PIEZOSURGERY® and BoneScalpel™ group, compared to standard surgery with an osteotome to perform craniotomies, but no time difference in performing the clinoidectomy between BoneScalpel™ and a conventional high-speed drill.ConclusionWe report the first experience with piezosurgery for anterior clinoidectomy. There is no time difference in performing the clinoidectomy between BoneScalpel™ and a conventional high-speed drill, and this is an undoubted advantage in critical contexts such as clinoid-paraclinoid surgeries, where the risk of dural sinuses tears is common.

[Piezoelectric ear surgery: a systematic review. German version]

BACKGROUND

The piezoelectric instrument (PEI) offers a novel technique for bone removal in ear surgery with a combination of micro-oscillation and cavitation. The aim of this review is to explore the advantages, disadvantages, and limitations of this instrument in comparison to the drill.

MATERIALS AND METHODS

We conducted a search of PubMed/MEDLINE and Google Scholar in accordance with the PRISMA recommendations. The primary selection included all studies reporting on the use of PEI in ear surgery or its effect on the inner ear. Only studies with a control group were included in the secondary selection.

RESULTS

The first search identified 49 studies between 2003 and 2022. These reported on a total of 1162 ear operations, during which PEI was used for various indications. Most data were based on uncontrolled retrospective studies or case reports (76%). Only one of the five controlled clinical studies was prospective and randomized. The advantages of PEI weighed against its limitations and disadvantages were critically analyzed in comparison to the drill.

CONCLUSION

Piezoelectric surgery is an innovative and promising surgical technique in the temporal bone. PEI appears to enable safer and more precise bone removal in close proximity to soft tissue when compared to the drill. The slower bone removal and cost factors represent current limitations to its wider use in ear surgery.

Thermal and physical damage in skull base drilling using gas cooling modes: FEM simulation and experimental evaluation

BACKGROUND

Skull base drilling, as a high-risk process, is one of the most important techniques of skull base surgeries.

METHODS

The temperature, thrust force, and torque were calculated using finite element method (FEM) simulation under two conventional cooling models, and internal and external CO₂ cooling modes at four rotational speeds (1000-4000 rpm). The temperatures at the bottom and on the surface of the drilling site were measured experimentally using a thermometer and a thermographic camera, respectively. The results were then compared with FEM results.

RESULTS

The efficiency rates of CO₂ coolants in reducing the maximum temperature, thrust force, and torque were at least 5.0-11.2%, 16.5-33.8%, and 6.9-11.3% higher than conventional cooling modes, respectively. The experimental results indicated that, in contrast to the maximum temperature, temperature durability was 72.7-107.3% higher in the conventional cooling modes than the cooling modes with external CO₂ coolant systems. The cracks and surface defects were less in the CO₂ coolants than the other cooling modes. The maximum temperature after the second and third drillings increased by 17.7 and 26.8%, compared to the first drilling in the conventional cooling modes. On the other hand, the repeated drillings had no impact on the temperature in the CO₂ cooling modes.

CONCLUSION

Skull base drilling with a rotational speed of 2000 rpm in the cooling mode of an external CO₂ coolant, even for repeated drillings, can lead to a skull drilling process with minimum risk of drill bit breakage and thermal and physical damage.

Ophthalmic Segment Aneurysms: Surgical Treatment and Outcomes

Background  Surgical treatment of ophthalmic segment aneurysms (OSAs) remain challenging because of complex anatomy surrounding the aneurysm and entails extensive drilling of anterior clinoid process to define proximal neck of the aneurysm and carotid exposure in the neck for proximal control. Materials and Methods  Authors present a retrospective analysis of 36 aneurysms in 35 patients with OSAs operated surgically by first author. Surgical clipping was done for the aneurysms as primary modality of treatment along with wrapping and trapping as required. Results  Commonest age group was 40 to 60 years with female preponderance of 3:1. Maximum (23) patients presented with subarachnoid hemorrhage (WFNS Gr 1), followed by asymptomatic patients (six). There were 18 small, 14 large, and four giant aneurysms, 15 dorsal wall, 17 ventral wall, three proximal posterior wall, and one blister aneurysm. Good outcome, as measured by Glasgow Outcome Score (GOS) was achieved in 29 patients. Conclusion  OSAs are technically demanding aneurysms, but with due diligence to surgical principles, good outcomes may be obtained.

Surgical procedures for correcting vertical maxillary excess: A review

INTRODUCTION

Vertical maxillary excess, a common orthodontic problem that leads to long faces and open bites, can be repositioned with a Le Fort I osteotomy. However, the Le Fort I osteotomy poses the risk of a variety of complications including descending palatine artery (DPA) injury. Although several Le Fort I osteotomy modifications were reported to avoid complications associated with this osteotomy, only a few of such studies were conducted in Japan, and details remain scarce.

PATIENTS AND METHODS

We performed a literature review regarding modifications of Le Fort I osteotomies, including Le Fort I with a horseshoe osteotomy, modified horseshoe osteotomy, unilateral horseshoe osteotomy, pyramidal osteotomy, and U-shaped osteotomy. We identified eight relevant studies conducted in Japan; one study did not provide the number of patients examined. The 77 patients (seven studies) with vertical maxillary excess who underwent orthognathic surgery were ≥17 years old.

DISCUSSION

There were no severe complications after the modified Le Fort I osteotomies. The postoperative maxillary changes obtained by the conventional horseshoe, modified horseshoe, unilateral type of horseshoe, pyramidal, and U-shaped osteotomies were nearly repositioned to the planned position and remained stable for ≥12 months post-surgery.

CONCLUSION

Our review indicates that preserving the DPA can lower the incidence of intra- and post-operative complications. Each modification of the Le Fort I osteotomy (i.e., conventional horseshoe, modified horseshoe, unilateral horseshoe, pyramidal, and U-shaped osteotomy) has its respective advantages and indications.

Technical note: rectangular femoral tunnel for anterior cruciate ligament reconstruction using a new ultrasonic device: a feasibility study

PURPOSE

The goal of this preliminary report was to show the use of novel Ultrasound (US) technology for anterior cruciate ligament (ACL) reconstruction surgery and evaluate its feasibility for the creation of a rectangular femoral bone tunnel during an arthroscopic procedure in a human cadaver model.

METHODS

Two fresh frozen human cadaver knees were prepared for arthroscopic rectangular femoral tunnel completion using a prototype US device (OLYMPUS EUROPA SE & CO. KG). The desired rectangular femoral tunnel was intended to be located in the femoral anatomical ACL footprint. Its tunnel aperture was planned at 10 × 5 mm and a depth of 20 mm should be achieved. For one knee, the rectangular femoral tunnel was realized without a specific cutting guide and for the other with a 10 × 5 mm guide. One experienced orthopedic surgeon performed the two procedures consecutively. The time for femoral tunnel completion was evaluated. CT scans with subsequent three-dimensional image reconstructions were performed in order to evaluate tunnel placement and configuration.

RESULTS

In the two human cadaver models the two 10 × 5x20mm rectangular femoral tunnels were successfully completed and located in the femoral anatomical ACL footprint without adverse events. The time for femoral tunnel completion was 14 min 35 s for the procedure without the guide and 4 min 20 s with the guide.

CONCLUSION

US technology can be used for the creation of a rectangular femoral bone tunnel during an arthroscopic ACL reconstruction procedure. The use of a specific cutting guide can reduce the time for femoral tunnel completion. Additional experience will further reduce the time of the procedure.

Surgical removal of orbital tumors by orbital approach using ultrasonic surgical system SONOPET®

Purpose: Orbital tumor surgery can be challenging when the tumor is located in a very narrow surgical field and close to important structures, such as nerves or extraocular muscles that can be damaged during surgery. Advances in technology and special surgical techniques help to avoid such damage. We describe our experience using SONOPET® ultrasonic surgical aspirator to remove 12 different orbital tumors that were difficult to treat due to their poorly defined borders, adhesions, or location.Methods: This is a retrospective case series that describes 12 operations that occurred between March 2016 to December 2018 using an ultrasonic device to debulk or remove orbital tumors. Different approaches and handpieces were used for each case depending on the location and consistency of the tumor.Results: All patients experienced an improvement in preoperative signs and symptoms, pain, proptosis, diplopia, or lagophthalmos. Visual acuity, which had been reduced due to the tumor, was also recovered. There were no intraoperative or postoperative complications due to the use of the device.Conclusions: The ultrasonic aspirator is a safe, useful device that can successfully remove or debulk infiltrating orbital masses through any orbital access, regardless of their consistency. It is helpful in cases of difficult anatomical access or difficult extraction due to size or adhesions to the surrounding tissues.

Efficacy and Safety of Ultrasonic Bone Curette-assisted Dome-like Laminoplasty in the Treatment of Cervical Ossification of Longitudinal Ligament

Objective

To assess the efficacy and safety of ultrasonic bone curette‐assisted dome‐like laminoplasty in the treatment of ossification of longitudinal ligament (OPLL) involving C₂.

Methods

A total of 64 patients with OPLL involving C₂ level were enrolled. Thirty‐eight patients who underwent ultrasonic bone curette‐assisted dome‐like laminoplasty were defined as ultrasonic bone curette group (UBC), and 28 patients who underwent traditional high‐speed drill‐assisted dome‐like laminoplasty were defined as high‐speed drill group (HSD). Patient characteristics such as age, sex, body mass index (BMI), symptomatic duration, and other information like the type of OPLL, the time of surgery, blood loss, C₂–C₇ Cobb angle change and complications were all recorded and compared. The Japanese Orthopaedic Association (JOA) score, the nerve root functional improvement rate (IR), and the visual analogue scale (VAS) were used to assess neurological recovery and pain relief. The change of the distance between the apex of ossification and a continuous line connecting the anterior edges of the lamina was measured to assess the spinal expansion extent. The measured data were statistically processed and analyzed using SPSS 21.0 software, and the measurement data were expressed as mean ± SD.

Results

In ultrasonic bone curette (UBC) group and high‐speed drill group (HSD) group, the average time for laminoplasty was 52.3 ± 18.2 min and 76.0 ± 21.8 min and the mean bleeding loss volume was 155.5 ± 41.3 mL and 177.4 ± 54.7 mL, respectively, with a statistically significant difference between the groups. Both groups demonstrated a significant improvement in neurological function. However, the VAS score in UBC group was lower than in HSD group at the 6‐month follow‐up (P < 0.05), but there was no significant difference at 1‐year follow‐up. We found that the loss of lordosis was 1.5° ± 1.0° in UBC group, which is significantly lower than that of HSD group at 1‐year follow‐up (3.8° ± 1.2°, P < 0.05). According to the change of canal dimension, we found that the expansion extent of the spinal canal in UBC group was similar to that of HSD group (P > 0.05). Only one patient in the UBC group and five patients in the HSD group displayed cerebrospinal fluid (CSF) leakag.

Conclusions

With the use of ultrasonic bone curette in OPLL dome‐like decompression, the decompression surgery could be completed relatively safely and quickly. It effectively reduced the amount of intraoperative blood loss and complications, and had better initial recovery of neck pain.

Pyramidal and posterior osseous release for maxillary superior/posterior mobilization using an ultrasonic bone-cutting device after Le Fort I osteotomy

AIM

The purpose of this study was to evaluate the efficiency of pyramidal and posterior osseous release (PPOR) for maxillary impaction using an ultrasonic bone-cutting device after Le Fort I (LFI) osteotomy.

MATERIALS AND METHODS

In total, 31 Japanese adults with jaw deformities, diagnosed as having maxillary excess with mandibular prognathism or deficiency, underwent LFI osteotomy and bilateral sagittal split osteotomy. The patients were divided into two groups: a trimming group (15 patients, four men and 11 women; mean age 24.8 years) and a PPOR group (16 patients, seven men and nine women; mean age 22.8 years). In the trimming group, osseous interference around the descending palatine artery (DPA) was removed using forceps, rounding bur, and reciprocating rasp. The PPOR technique was used to remove osseous fragments created by V-shaped osteotomy around the DPA following vertical osteotomy behind the DPA using an ultrasonic bone-cutting device (Variosurg 3; NSK, Tochigi, Japan). The operative times for maxillary osteotomy, total operative times (including bilateral sagittal split osteotomy), and total blood loss were assessed.

RESULTS

The mean planned amounts of maxillary impaction were 4.37 ± 1.27 mm in the trimming group and 4.38 ± 1.36 mm in the PPOR group (p = 0.98). The mean maxillary operative time for the PPOR group was significantly shorter, by 25.5% (p < 0.001). Total operative time for the PPOR group was also significantly shorter, by 24.3% (p < 0.001). Mean blood loss was significantly lower in the PPOR group than in the trimming group (p = 0.003).

CONCLUSION

The PPOR technique for maxillary impaction after LFI osteotomy shortened the operative time and enabled secure reduction of the maxilla in patients who required the treatment of maxillary impaction with preservation of the DPA bundle.

Deep Lateral Wall Partial Rim-Sparing Orbital Decompression with Ultrasonic Bone Removal for Treatment of Thyroid-Related Orbitopathy

Purpose

To describe the results of thyroid-related orbitopathy (TRO) treated by ultrasonic deep lateral wall bony decompression with partial rim sparing (DLW-PRS).

Methods

A review was carried out, from January 2015 to September 2017, of all patients treated with ultrasonic DLW-PRS decompression using a SONOPET® (Stryker, Kalamazoo, MI, USA) ultrasonic aspirator, using a lateral, small triangle flap incision for access. The primary outcome was the change in proptosis (measured by the difference in Hertel exophthalmometry measurements). Other secondary outcomes were changes in visual acuity (VA) (using Snellen scale, decimal fraction), presence of lagophthalmos, eyelid retraction (measured by upper eyelid margin distance to the corneal reflex (MRD₁) and lower eyelid margin distance to the corneal reflex (MRD₂), and presence of exposure keratopathy).

Results

A total of 58 orbital decompressions in 35 patients were reviewed, with 23 patients (65.7%) having bilateral decompressions. There was a female preponderance with 26 patients (74.2%), and the mean age ± standard deviation was 52.6 ± 13.9 years. Mean proptosis was 24.51 ± 1.76 mm preoperatively, reduced to 19.61 ± 1.27 mm in final follow-up. The mean reduction was 4.9 ± 1.54 mm. VA improved from 0.8 ± 0.14 to 0.9 ± 0.12, p=0.039. 5 of 13 patients (38.4%) with preoperative diplopia reported improvement or complete resolution after surgery. MRD₁ was reduced from 5.25 ± 0.88 mm to 4.49 ± 0.7 mm. MRD₂ was also reduced from 6.3 ± 0.88 mm to 5.0 ± 0.17 mm. Presence of lagophthalmos was reduced from 35 eyes (60.3%) to five (8.6%); the presence of epiphora was also reduced from 20 patients (57.1%) to 3 (8.5%) following decompression. Complications of the surgery included zygomatic hypoaesthesia in 14 (40%) patients in the early postoperative period and chewing alterations in 10 (28.5%) of the patients. All of these complications were resolved at the 6-month follow-up visit. We noted no surgical complications such as ocular or soft tissue damage, infection, inflammation, or visual loss.

Conclusions

The SONOPET® ultrasonic bone curette can be used safely and effectively for DLW orbital decompression surgery. The main benefits were good visualization and handling of tissues and speed and ease of use of the equipment. This trial is registered with ClinicalTrials.gov identifier: NCT04025034.

Characteristics of ultrasound device: a new technology for bone curettage and excavation

Background

Ultrasonic (US) devices are used in laparoscopic, dental, and spinal surgeries, while it is difficult to use for the joint under irrigation and perfusion solutions due to lack of power. A new US device is developed with greater voltage improvement and has been implemented in the arthroscopic field. The aim is to compare the characteristics of the US devices with the conventional ones in water.

Methods

Twenty bone blocks from the porcine femur were settled in a holder in water. A 4.0 mm diameter abrader burr moved 15 mm along the long axis of the bone block in ten blocks for three times. A 4.3 mm wide curette blade powered by ultrasonic vibration was moved in the same manner in the other ten blocks. The gutter shape, including the gutter depth and the bottom angle of the gutter, and the curetted area ratio of the gutter were assessed.

Forty bones blocks from the porcine femurs were clamped with a holder in water, while the cortical bone surface must be located on the side. A 5 mm diameter drill excavated the bone along the previously-inserted guide wire to the 15 mm depth for twenty blocks. Next, the US excavation probe of 5x4mm rectangular shape was moved to the same depth in the other twenty blocks. Each ten block was cut in half along the bone tunnel and was assessed the surface roughness at three area, while the cross-sectional area (CSA) of the tunnel were measured and the ratio of the measured CSA was calculated based on an expected CSA in the remaining ten blocks for each device.

Results

The depth of curettage and bottom angle were significantly smaller with the US device than with the abrader burr at all planes, while the curetted area ratio created by each device was mostly equal to the other. Surface roughness was similar in two evacuating devices except one area. CSA ratio with the US excavation device was significantly smaller than that with the drill.

Conclusion

US curettage has an advantage to flatly curette bone surfaces, while a bone tunnel can be accurately created with the US device.

Novel approach using ultrasonic bone curettage and transoral robotic surgery for en bloc resection of cervical spine chordoma: case report

Chordomas are rare, locally aggressive neoplasms that develop from remnants of the notochord. The typical approach to chordomas of the clivus and axial cervical spine often limits successful en bloc resection. In this case report, authors describe the first-documented transoral approach using both transoral robotic surgery (TORS) for exposure and the Sonopet bone scalpel under navigational guidance to achieve en bloc resection of a cervical chordoma. This 27-year-old man had no significant past medical history (Charlson Comorbidity Index 0). During a trauma workup following a motor vehicle collision, a CT of the patient's cervical spine demonstrated an incidental 2.2-cm lesion situated along the posterior aspect of the C2 vertebral body. Postoperative imaging showed successful en bloc resection with adequate placement of hardware, and the pathology report demonstrated negative resection margins. The patient tolerated the procedure well, and because of the successful en bloc resection, radiation has been deferred. At 7 months postoperatively, the patient returned to work in New York City. Contrasted MRI at 15 months postoperatively showed the patient to be disease free. This approach offers a promising way forward in the treatment of these complex tumors.

The Role of Powered Surgical Instruments in Ear Surgery: An Acoustical Blessing or a Curse?

Ear surgery in many ways lagged behind other surgical fields because of the delicate anatomical structures within the ear which leave surgeons with little room for error. Thus, while surgical instruments have long been available, their use in the ear would most often do more damage than good. This state of affairs remained the status quo well into the first half of the 20th century. However, the introduction of powered surgical instruments, specifically the electric drill used in conventional microscopic ear surgery (MES) and the ultrasonic aspirator, the Sonopet® Omni, in transcanal endoscopic ear surgery (TEES) marked major turning points. Yet, these breakthroughs have also raised concerns about whether the use of these powered surgical instruments within the confines of the ear generated so much noise and vibrations that patients could suffer sensorineural hearing loss as a result of the surgery itself. This paper reviews the intersection between the noise and vibrations generated during surgery; the history of surgical instruments, particularly powered surgical instruments, used in ear surgeries and the two main types of surgical procedures to determine whether these powered surgical instruments may pose a threat to postoperative hearing.

Heat generation by ultrasonic bone curette comparing with high-speed drill

BACKGROUND

Ultrasonic bone curettes have been used as with high-speed drills. However, the amount of heat generated by the ultrasonic bone curette is not well known. This study quantitatively assessed the heat generated by an ultrasonic bone curette and compared it to that by a high-speed drill.

METHODS

The thermal change in a swine skull during bone curetting using an ultrasonic device and a high-speed drill were assessed. The investigation focused on the type of surgical manipulation (brush-like strokes vs. pushing motion) and irrigation (room temperature vs. cold water; low-volume irrigation vs. high-volume irrigation).

RESULTS

The thermal elevation during drill use was suppressed when using brush-like strokes compared to pushing motion (brush-like strokes, 44.7 °C; pushing motion, 69.2 °C; p < 0.01). Cold-water irrigation while drilling had a small effect compared to room temperature (RT) water (RT, 44.7 °C; cold, 35.2 °C; p = 0.12). The temperature generated by the curette was higher than that generated by the drill (curette, 72.5 °C; drill, 44.7 °C; p < 0.01). High-volume irrigation was required to reduce the heat generated by the curette (no irrigation, 88.6 °C; low-volume, 72.5 °C; high-volume, 60.5 °C; p < 0.01).

CONCLUSIONS

The ultrasonic bone curate generated more heat than the high-speed drill. During surgical manipulation, the use of brush-like strokes by both the high-speed drill and the ultrasonic bone curette is necessary to avoid excess thermal elevation. Irrigation with RT water is sufficient to avoid heat generation. High-volume irrigation is required to reduce the heat generated by the curette.

Ultrasonic bone aspirator use in endoscopic ear surgery: feasibility and safety assessed using cadaveric temporal bones

Objectives:

To describe the feasibility and assess the safety of using an ultrasonic bone aspirator in endoscopic ear surgery.

Methods:

Five temporal bones were dissected via endoscopic ear surgery using a Sonopet ultrasonic bone aspirator. Atticoantrostomy was undertaken. Another four bones were dissected using routine endoscopic equipment and standard bone curettes in a similar manner. Feasibility and safety were assessed in terms of: dissection time, atticoantrostomy adequacy, tympanomeatal flap damage, chorda tympani nerve injury, ossicular injury, ossicular chain disruption, facial nerve exposure and dural injury.

Results:

The time taken to perform atticoantrostomy was significantly less with the use of the ultrasonic bone aspirator as compared to conventional bone curettes.

Conclusion:

The ultrasonic bone aspirator is a feasible option in endoscopic ear surgery. It enables easy bone removal, with no additional complications and greater efficacy than traditional bone curettes. It should be a part of the armamentarium for transcanal endoscopic ear surgery.

Endoscopic endonasal management of cerebrospinal fluid rhinorrhea after anterior clinoidectomy for aneurysm surgery: changing the paradigm of complication management

Resection of the anterior clinoid process results in the creation of the clinoid space, an important surgical step in the exposure and clipping of clinoidal and supraclinoidal internal carotid artery aneurysms. Cerebrospinal fluid rhinorrhea is an undesired and potentially serious complication. Conservative measures may be unsuccesful, and there is no consensus on the most appropriate surgical treatment. Two patients with persistent transclinoidal CSF rhinorrhea after aneurysm surgery were successfully treated with a combined endoscopic transnasal/transeptal binostril approach using a fat graft and ipsilateral mucosal nasal septal flap. Anatomical considerations and details of the surgical technique employed are discussed, and a management plan is proposed.

Endoscopic ultrasonic dacryocystorhinostomy: clinical profile and outcomes

Ultrasonic endoscopic dacryocystorhinostomy (UEnDCR) is emerging alternative modality of managing nasolacrimal duct obstructions. The aim of this study was to report the clinical profile and outcomes with a UEnDCR with mitomycin C and silicone intubation. Prospective interventional case series performed on all consecutive patients undergoing an ultrasonic endoscopic dacryocystorhinostomy over a 1-year period from September 2013 to October 2014. All surgeries were performed by a single surgeon (MJA). Data collected include demographics, presentation, indications for surgery, past interventions, intraoperative and post-operative complications and outcomes. The main outcome measures were anatomical and functional success of the surgery. 44 procedures were performed in 41 patients. The mean age was 31.6 years. Children with complex congenital nasolacrimal duct obstructions refractory to probing and intubation accounted for 17 % (7/41) of the cohort. Past history of acute dacryocystitis was noted in 35.6 % (15/41). Two patients (4.9 %, 2/41) had failed external DCR. A minimal follow-up of 6 months following surgery was taken for final analysis. Complications included intraoperative focal epithelial burn in one patient that healed spontaneously and post-operative ostium granulomas in 15.9 % (7/44) of the ostia. At the 6-month follow-up, anatomical and functional successes were noted in 93.1 % (41/44) and 88.6 % (39/44), respectively. Ultrasonic dacryocystorhinostomy is a safe and effective alternative modality in the management of nasolacrimal duct obstructions in pediatric and adult age groups. Setup was easy and no additional technical difficulties were observed.

Anterior clinoid process and the surrounding structures

BACKGROUND

The anterior clinoid process (ACP) is located close to the optic nerve, internal carotid artery, ophthalmic artery, and can be easily injured in an ACP-related surgery. An anatomical study clearly defining the ACP is of great importance. In addition, computed tomographic (CT) images may be a new tool for the anatomical analysis of ACP compared with the use of a cadaver and skull study, and more data related to ACP can be measured by CT images.

PURPOSE

We studied the anatomical structure of ACP and the structures surrounding it to provide information to surgeons for ACP-related surgery.

METHODS

Computed tomography angiographic images of 102 individuals were reviewed. The measurement was performed on coronal, sagittal, and axis planes after multiplanar reformation. The length of ACP and the distance between apex of ACP and sagittal midline were measured in the axial plane; the classification of ACP and the occurrence rate of bone bridge were also viewed in axial plane. The thickness of ACP was measured in sagittal plane.

RESULT

In Chinese population, 12.3% of the ACP is gasified, and the pneumatization of ACP has a relationship with the pneumatization of sphenoid sinus. The length and thickness of ACP are similar to that in previous studies in cadaver. The apex of ACP is relatively stationary to the C3 and C4 segments of the internal carotid artery. The occurrence rate of anterior and middle clinoid bone bridge was 7.8%; the occurrence rate of anterior and posterior clinoid bone bridge was 9.3%.

CONCLUSIONS

The anatomical structure of ACP can be studied effectively in CT images. Recognizing the anatomical characteristics of the ACP and optic strut is important in decreasing the incidence of surgical complications of an anterior clinoidectomy and in the proper intraoperative management to prevent these complications.

Development of Cutting and Suction Device with Twist Blade Screw for Minimally Invasive Surgery: Evaluation of Suction Performance

In this study, we aim to develop a narrow-diameter and long-bore device for minimally invasive surgery that achieves the simultaneous cutting and suction of body tissue such as the diseased part of an organ. In this paper, we propose a screw made of a thin metal plate, and we developed a prototype device using this screw. For smooth operation, the suction performance must be superior to the cutting performance. Therefore, we performed experiments and evaluated the suction performance of the developed device assuming the crushed tissue pieces correspond to a highly viscous fluid. From the results, we confirmed that the suction volume is almost proportional to the rotation speed of the screw in the low speed range, and the device has an upper limit of suction volume at a certain rotation speed. Considering practical use, its proportional speed range is suitable for the device controllability of cutting and suction volume, and the size of the device tip needs to be 1 mm or more. Based on these conditions, we are planning to examine the shape of the cutting edge for realizing efficient cutting and suction and we will complete the device.

Application of ultrasonic bone curette in endoscopic endonasal skull base surgery: technical note

Background Endoscopic endonasal surgery (EES) of the skull base often requires extensive bone work in proximity to critical neurovascular structures. Objective To demonstrate the application of an ultrasonic bone curette during EES. Methods Ten patients with skull base lesions underwent EES from September 2011 to April 2012 at the University of Pittsburgh Medical Center. Most of the bone work was done with high-speed drill and rongeurs. The ultrasonic curette was used to remove specific structures. Results All the patients were submitted to fully endoscopic endonasal procedures and had critical bony structures removed with the ultrasonic bone curette. Two patients with degenerative spine diseases underwent odontoid process removal. Five patients with clival and petroclival tumors underwent posterior clinoid removal. Two patients with anterior fossa tumors underwent crista galli removal. One patient underwent unilateral optic nerve decompression. No mechanical or heat injury resulted from the ultrasonic curette. The surrounding neurovascular structures and soft tissue were preserved in all cases. Conclusion In selected EES, the ultrasonic bone curette was successfully used to remove loose pieces of bone in narrow corridors, adjacent to neurovascular structures, and it has advantages to high-speed drills in these specific situations.

What is the role of clipping surgery for ruptured cerebral aneurysms in the endovascular era? A review of recent technical advances and problems to be solved

Craniotomy and clipping have been robust treatments for ruptured cerebral aneurysm for more than 50 years, with satisfactory overall outcomes. Technical advances, such as developments in microsurgical tools and equipment, adjunctive therapy, and novel monitoring methods enable safer and more efficient treatment. However, overall surgical results have not shown any major improvements, as outcomes are mainly determined by the damage from initial bleeding, and new treatment strategies are not always free from associated complications and problems. Recent advances in endovascular treatment are shifting the treatment for ruptured cerebral aneurysm from craniotomy and clipping to intravascular coil embolization. However, craniotomy and clipping are very important for the treatment of ruptured cerebral aneurysm. This paper discusses recent advances and future perspectives in the field of clipping surgery for ruptured aneurysms.

Safety of drilling for clinoidectomy and optic canal unroofing in anterior skull base surgery

BACKGROUND

Skull base drilling is a necessary and important element of skull base surgery; however, drilling around vulnerable neurovascular structures has certain risks. We aimed to assess the frequency of complications related to drilling the anterior skull base in the area of the optic nerve (ON) and internal carotid artery (ICA), in a large series of patients.

METHODS

We included anterior skull base surgeries performed from 2000 to 2012 that demanded unroofing of the optic canal, with extra- or intradural clinoidectomy and/or drilling of the clinoidal process and lateral aspect of the tuberculum sella. Data was retrieved from a prospective database and supplementary retrospective file review. Our IRB waived the requirement for informed consent. The nature and location of pathology, clinical presentation, surgical techniques, surgical morbidity and mortality, pre- and postoperative vision, and neurological outcomes were reviewed.

RESULTS

There were 205 surgeries, including 22 procedures with bilateral optic canal unroofing (227 optic canals unroofed). There was no mortality, drilling-related vascular damage, or brain trauma. Complications possibly related to drilling included CSF leak (6 patients, 2.9 %), new ipsilateral blindness (3 patients, 1.5 %), visual deterioration (3 patients, 1.5 %), and transient oculomotor palsy (5 patients, 2.4 %). In all patients with new neuropathies, the optic and oculomotor nerves were manipulated during tumor removal; thus, new deficits could have resulted from drilling, or tumor dissection, or both.

CONCLUSION

Drilling of the clinoid process and tuberculum sella, and optic canal unroofing are important surgical techniques, which may be performed relatively safely by a skilled neurosurgeon.

Ultrasonic orthognathic surgery: enhancements to established osteotomies

The use of a novel ultrasonic osteotome enabled the authors to modify well-established orthognathic osteotomies to more favourably address the anatomy. For this purpose, they utilized a powerful ultrasonic device with tissue-selective cutting characteristics that was originally developed for spinal osteotomies and nerve decompression (BoneScalpel™ by Misonix Inc., Farmingdale, NY, USA). Its straight ultrasonic blade was adapted for dual action, and a soft protective element was added. The product modifications and the related changes regarding maxillary and mandibular osteotomies are explained in detail. A series of 83 patients underwent orthognathic surgery with the BoneScalpel ultrasonic osteotome. All osteotomies within this study group were performed purely ultrasonically and without the auxiliary use of reciprocating saws or rotary burrs. The complications, alveolar nerve impairment and bad splits were assessed. To assess the quality of the lingual osteotomies and pterygomaxillary separation, three-dimensional scanning was performed on 30 patients. In conclusion, the BoneScalpel™ ultrasonic osteotome enabled improved control over orthognathic osteotomies and resulted in significant reductions in the occurrence of nerve impairment and bad splits.

Recapping hemilaminoplasty for spinal surgical disorders using ultrasonic bone curette

Objective:

The authors present a novel method of the recapping hemilaminoplasty in a retrospective study of patients with spinal surgical disorders. This report describes the surgical technique and the results of hemilaminoplasty using an ultrasonic bone curette. The aim of this study was to examine the safety and effectiveness of the hemilaminoplasty technique with ultrasonic bone curette.

Methods:

Between April 2003 and July 2011, 33 patients with various spinal diseases (17 spinal tumors, 5 dural arteriovenous fistulas, 3 syringomyelia, 2 sacral perineural cysts, and 2 arachnoid cysts) were treated microsurgically by using an ultrasonic bone curette with scalpel blade and lightweight handpiece. The ultrasonic bone curette was used for division of lamina. After resection of the lesion, the excised lamina was replaced exactly in situ to its original anatomic position with a titanium plate and screw. Additional fusion technique was not required and the device was easy to handle. All patients were observed both neurologically and radiologically by dynamic plain radiographs and computed tomography (CT) scan.

Results:

The operation was performed successfully and there were no instrument-related complications such as dural laceration, nerve root injury, and vessels injury. The mean number of resected and restored lamina was 1.7. CT confirmed primary bone fusion in all patients by 12 months after surgery.

Conclusion:

The ultrasonic bone curette is a useful instrument for recapping hemilaminoplasty in various spinal surgeries. This method allows anatomical reconstruction of the excised bone to preserve the posterior surrounding tissues.

Complications of anterior clinoidectomy through lateral supraorbital approach

OBJECTIVE

We reviewed the surgical complications from our recent experience in vascular and tumor patients who underwent anterior clinoidectomy through the lateral supraorbital (LSO) approach.

METHODS

Between June 2007 and January 2011, a total of 82 patients with neoplastic and vascular lesions underwent anterior clinoidectomy by the senior author (J.H.) through the LSO approach. We analyzed the operative videos paying particular attention to the surgical technique used for removal of the anterior clinoid process (ACP) and compared the microsurgical nuances to postoperative complications related to anterior clinoidectomy.

RESULTS

Forty-five patients were treated for aneurysms; 35 patients for intraorbital, parasellar, and suprasellar tumors; and 2 patients for carotid-cavernous fistulas. Intradural anterior clinoidectomy was performed in 67 (82%) cases; in 15 (18%) cases an extradural approach was used. In 51 (62%) cases, ACP was removed completely, whereas in the remaining 31 (38%) a tailored anterior clinoidectomy was performed. Four (5%) patients had new postoperative visual deficits and 3 (4%) experienced a worsening of preoperative visual deficits. Twelve (15%) patients improved their preoperative visual deficits after intradural anterior clinoidectomy. Ultrasonic bone device is a useful tool but may damage the optic nerve when performing anterior clinoidectomy. There was no mortality in our series.

CONCLUSION

Anterior clinoidectomy can be performed through an LSO approach with a safety profile that is comparable to other approaches. Ultrasonic bone dissector is a useful tool but may lead to injury of the optic nerve and should be used very carefully in its vicinity.

Anterior clinoidectomy: Description of an alternative hybrid method and a review of the current techniques with an emphasis on complication avoidance

BACKGROUND

Anterior clinoidectomy is a difficult but important part of surgery for a variety of parasellar, proximal carotid and central skull base pathologies. First developed intradurally nearly 60 years ago, the promotion of an extradural technique decades later offered an approach with a different set of difficulties, risks and benefits. Many recent studies have demonstrated that there is no consensus about the "correct side" of the dura from which to remove the anterior clinoid process in a number of pathologies. Here, we review and compare the current techniques for intra- and extradural clinoidectomy and describe a hybrid alternative technique.

METHODS

We used a hybrid method to potentially engage the advantages of the intradural and extradural techniques. The hybrid method starts with an extradural sphenoid wing osteotomy to the level of the superior orbital fissure (SOF). The dura is then incised parallel to the sphenoid wing lateral to the SOF, and the need for further bony removal, including clinoidectomy, is assessed after gentle elevation of the frontal lobe and release of cerebrospinal fluid through opening the optico-carotid cisterns and inspection of the pathology in relation to the clinoid. Sylvian fissure may be dissected to relieve retraction on the frontal lobe.

RESULTS

The hybrid method allows an early identification of the optic nerve and its protection during clinoidectomy. The operator leaves the dura medial to the SOF intact and the clionoidectomy proceeds in an extradural fashion while intradural inspection periodically is performed to assess the extent of necessary extradural bony removal.

CONCLUSION

The hybrid method theoretically can be used as a versatile method under some circumstances. Cutting the dura along the sphenoid wing will prevent the dural layers from obscuring the clinoid and offers intradural visualization to monitor the lesion and potentially tailor bony removal.

Use of piezosurgery for internal auditory canal drilling in acoustic neuroma surgery

BACKGROUND

Piezosurgery is based on microvibrations generated by the piezoelectrical effect and has a selective bone-cutting ability with preservation of soft tissue. This study examined the applicability of Piezosurgery compared to rotating drills (RD) for internal auditory canal (IAC) opening in acoustic neuroma (AN) surgery.

MATERIALS AND METHODS

Piezosurgery was used in eight patients for IAC drilling in AN surgery. After exposition of the IAC and tumor, the posterior wall of the IAC was drilled using Piezosurgery instead of RD. Piezosurgery was evaluated with respect to practicability, safety, preciseness of bone cutting, preservation of cranial nerves, influences on neurophysiological monitoring, and facial nerve and hearing outcome.

RESULTS

Piezosurgery was successfully used for selective bone cutting, while cranial nerves were structurally and functionally preserved, which could be measured by means of neuromonitoring. Piezosurgery guaranteed a safe and precise cut by removing bone layer by layer in a shaping way. Compared to RD, limited influence on neurophysiological monitoring attributable to Piezosurgery was noted, allowing for continuous neuromonitoring. No disadvantage due to microvibrations was noticed concerning hearing function. The angled tip showed better handling in right-sided than in left-sided tumors in the hands of a right-handed surgeon. The short, thick handpiece may be improved for more convenient handling.

CONCLUSION

Piezosurgery is a safe tool for selective bone cutting for opening of the IAC with preservation of facial nerve and hearing function in AN surgery. Piezosurgery has the potential to replace RD for this indication because of its safe and precise bone-cutting properties.

Bone removal with a new ultrasonic bone curette during endoscopic endonasal approach to the sellar-suprasellar area: technical note

BACKGROUND

Accessing intradural lesions via an extended endoscopic endonasal approach requires a relatively large bony removal over the skull base.

OBJECTIVE

We describe the Sonopet ultrasonic bone curette with a new dedicated endonasal hand-piece.

MATERIALS AND METHODS

We used this ancillary device in 27 nonconsecutive endonasal procedures for different skull base lesions (18 standard pituitary operations and 9 extended approaches for either meningiomas or craniopharyngiomas).

RESULTS

The ultrasonic bone curette with endonasal hand-piece was easy to use and effective during the removal of the bone covering or when close to the carotid and optic prominences, as well as in preserving the integrity of the superior intercavernous sinus. In only 1 case was small tearing of the dura mater observed during the bony removal. No cases of injury to the major neurovascular structures occurred.

CONCLUSION

The Sonopet ultrasonic bone curette is a useful tool during endoscopic endonasal skull base surgery.

The "no-drill" technique of anterior clinoidectomy: a cranial base approach to the paraclinoid and parasellar region

INTRODUCTION

A high-speed power-drilling technique of anterior clinoidectomy has been advocated in all publications on paraclinoid region surgery. The entire shaft of the power drill is exposed in the operative field; thus, all neurovascular structures in proximity to any portion of the full length of the rotating drill bit are at risk for direct mechanical and/or thermal injury. Ultrasonic bone removal has recently been developed to mitigate the potential complications of the traditional power-drilling technique of anterior clinoidectomy. However, ultrasound-related cranial neuropathies are recognized complications of its use, as well as the increased cost of device acquisition and maintenance.

METHODS

A retrospective review of a cerebrovascular/cranial base fellowship-trained neurosurgeon's 45 consecutive cases of anterior clinoidectomy using the "no-drill" technique is presented. Clinical indications have been primarily small to giant aneurysms of the proximal internal carotid artery; however, in addition to ophthalmic segment aneurysms, selected internal carotid artery-posterior communicating artery aneurysms and internal carotid artery bifurcation aneurysms, and other large/giant/complex anterior circulation aneurysms, this surgical series of "no-drill" anterior clinoidectomy includes tuberculum sellae meningiomas, clinoidal meningiomas, cavernous sinus lesions, pituitary macroadenomas with significant suprasellar extension, other perichiasmal lesions (sarcoid), and fibrous dysplasia. A bony opening is made in the mid-to posterior orbital roof after the initial pterional craniotomy. Periorbita is dissected off the bone from inside the orbital compartment. Subsequent piecemeal resection of the medial sphenoid wing, anterior clinoid process, optic canal roof, and optic strut is performed with bone rongeurs of various sizes via the bony window made in the orbital roof.

RESULTS

No power drilling was used in this surgical series of anterior clinoidectomies. Optimal microsurgical exposure was obtained in all cases to facilitate complete aneurysm clippings and lesionectomies. There were no cases of direct injury to surrounding neurovascular structures from the use of the "no-drill" technique. The surgical technique is presented with illustrative clinical cases and intraoperative photographs, demonstrating the range of applications in anterior and central cranial base neurosurgery.

CONCLUSION

Power drilling is generally not necessary for removal of the anterior clinoid process, optic canal roof, and optic strut. Rigorous study of preoperative computed tomographic scans/computed tomographic angiography scans, magnetic resonance imaging scans, and angiograms is essential to identify important anatomic relationships between the anterior clinoid process, optic strut, optic canal roof, and neighboring neurovascular structures. The "no-drill" technique eliminates the risks of direct power-drilling mechanical/ thermal injury and the risks of ultrasound-associated cranial neuropathies. The "no-drill" technique provides a direct, time-efficient, and efficacious approach to the paraclinoid/ parasellar/pericavernous area, using a simplified mechanical route. This technique is applicable to any neurosurgical diagnosis and approach in which anterior clinoidectomy is necessary. It is arguably the gentlest and most efficient method for exposing the paraclinoid/parasellar/pericavernous region.

Simple anterior petroclinoid fold resection in the treatment of low-lying internal carotid-posterior communicating artery aneurysms

BACKGROUND

We investigate cases of low-lying IC-PC artery aneurysms with the aim to demonstrate an easy and less laborious technique of APF resection in lieu of AC in cases involving difficult aneurysmal neck clipping.

METHODS

Among a total 117 IC-PC artery aneurysms, 15 low-lying IC-PC artery aneurysms (13 ruptured and 2 unruptured) were obliterated between January 1996 and December 2006. We retrospectively investigated patients who have been treated by simple resection of APF (APF group) compared with patients treated by AC (AC group) in the surgery of the communicating segment of the ICA aneurysms. Clinical, radiological, and operative data were analyzed; and the 2 groups were compared.

RESULTS

Among 15 cases, 7 cases were included in the AC group and 8 cases were included in the APF group. One case was treated by a combination of AC and APF resection simultaneously. There was no difference in the clinical outcome between the 2 groups. No operative complications were encountered in any patients treated by the simple APF resection.

CONCLUSIONS

Simple APF resections improve the visualization of the proximal neck of aneurysms, allowing for accurate clip placement and also facilitating the use of proximal vascular control as an adjunct to low-lying IC-PC artery aneurysms surgery.

Refinement of the extradural anterior clinoidectomy: surgical anatomy of the orbitotemporal periosteal fold

OBJECTIVE

Extradural removal of the anterior clinoid process is technically challenging because of the limited exposure. In our study of the extradural anterior clinoidectomy, we describe anatomic details and landmarks to facilitate sectioning of the orbitotemporal periosteal fold and elevation of the temporal fossa dura from the superior orbital fissure. We assess the morbidity associated with these procedures as well as compare the indications, advantages, and disadvantages of intra-versus extradural clinoidectomy.

METHODS

Of five formalin-fixed cadaveric heads, four were used for cadaveric dissections and one was used for histological examination.

RESULTS

Sectioning of the orbitotemporal periosteal fold revealed a cleavage plane between the temporal fossa dura and a thin layer of connective tissue that covers the superior orbital fissure. The lacrimal nerve coursed immediately medial to this surgically created cleavage plane. The superior orbital vein crossed laterally under the cranial nerves, which pass through the superior orbital fissure. This vein is particularly vulnerable as it is composed only of endothelium and a basal membrane.

CONCLUSION

Both intra- and extradural techniques for anterior clinoidectomy are important parts of the neurosurgical armamentarium. Sharp incision of the orbitotemporal periosteal fold to increase the extradural exposure of the anterior clinoid process should be made at the level of the sphenoid ridge and restricted to the periosteal bridge. Subsequent blunt elevation of the temporal fossa dura should be performed; however, peeling of the temporal fossa dura should be limited to avoid cranial nerve morbidity.

Use of the Sonopet ultrasonic curettage device in intraoral vertical ramus osteotomy

This study was designed to evaluate the usefulness of the Sonopet UST-2001 (Miwatec Co., Ltd., Kawasaki, Kanagawa, Japan) ultrasonic curettage device, and to assess the outcome after intraoral vertical ramus osteotomy (IVRO). Thirteen Japanese adults (age range 20-41 years, mean age 29.6 years) presented with jaw deformities diagnosed as mandibular prognathism and asymmetry; they all underwent IVRO of the mandible. This procedure was followed by ultrasonic bone curettage using the Sonopet to make a guiding notch or groove in the lateral cortex of the ramus without damaging the vessels and nerves. After surgery, the osteotomy line was evaluated by three-dimensional computed tomography. In all patients, osteotomy with the Sonopet device was achieved safely, with minimal bleeding and no major complications. The distal segment could be moved into its ideal position and all patients achieved their ideal profiles. Ultrasonic bone curettage is a safe method for making a guiding groove, without damage to surrounding tissue, prior to complete IVRO.

Use of a Novel Ultrasonic Surgical System for Decompression of the Facial Nerve

OBJECTIVE

The middle cranial fossa approach has been used to explore and decompress the facial nerve in patients with Bell's palsy and facial nerve tumors. Unfortunately, this approach is technically challenging and has a significant risk of injury to the facial nerve and to the cochleovestibular organs. One way to minimize the risk may be with the use of the Sonopet Omni ultrasonic aspirator (Synergetics Inc., St Charles, MO) instead of an otologic drill.

METHODS

In this prospective study using cadaveric temporal bones, a total of 17 temporal bone specimens were used. Seven cadaveric temporal bones were used (4-left, 3-right) for the initial feasibility study. At a second session, an additional 10 temporal bones (5-left, 5-right) underwent decompression of the facial nerve from the fundus of the internal auditory canal (IAC) to the geniculate ganglion (ie, labyrinthine segment). The average time to decompress the labyrinthine segment was measured. The temporal bones were then examined for evidence of any injury.

RESULTS

None of the 17 temporal bones showed any sign of injury to the superior semicircular canal or the cochlea. However, one specimen did have penetration of the IAC dura; another specimen did have penetration of the epineurium of the facial nerve. However, in neither case was there any evidence of injury to the facial nerve itself. At the first session, the average time for decompression of the labyrinthine segment was 10 minutes and 12 seconds. At the second session, the average time for decompression was 5 minutes and 0 seconds.

CONCLUSION

The ultrasonic surgical system may be used as an alternative to the surgical drill for decompression of the facial nerve. Although a learning curve does exist, as with any new surgical tool or device, our results indicate that the device can be used safely and in a reasonable amount of time. However, before proceeding with intraoperative use of this device for otologic and neurotologic procedures, familiarization is first recommended on cadaveric temporal bone specimens.

Surgical pitfalls of an ultrasonic bone curette (SONOPET) in spinal surgery

OBJECTIVE

We report our experience with the SONOPET ultrasonic bone curette.

METHODS

Between September 2001 and July 2005, 546 patients underwent microscopic spinal surgeries using a high-speed drill and the SONOPET instrument.

RESULTS

We encountered operative complications thought to be attributable to the use of the SONOPET in six patients (1.1%). There were five instances of dural puncture and one spinal cord injury. All dural tears occurred when the dura mater was aspirated into the tip of the SONOPET. None of the affected patients developed postoperative clinical complications because cerebrospinal fluid leakage was avoided by appropriate closure. We think that the transient spinal cord injury occurred because the vibration emanating from the SONOPET was transmitted directly to the spinal cord. Some patients experienced damage to the epidural venous plexus for reasons similar to those described above.

CONCLUSION

SONOPET facilitates the removal of bone in a narrow field, such as that encountered during keyhole surgery. It aids in the removal of the lateral edge of bone and is especially useful for expanding the foramen intervertebrale or opening the lateral recess. However, its use is not without risk. To prevent dural tears and venous plexus injury, we recommend that cotton be placed between the SONOPET and important structures. To avoid spinal cord injury, we suggest that the SONOPET be inserted horizontal with the dura mater to avoid the direct transmission of vibrations emanating from the instrument to the spinal cord. SONOPET is suitable for decompression on the lateral side, but not for decompression above the spinal cord.

Extradural anterior clinoidectomy as an alternative approach for optic nerve decompression: anatomic study and clinical experience

OBJECTIVE

We introduce pterional craniotomy extradural anterior clinoidectomy as a new alternative approach for optic nerve decompression in patients with traumatic optic neuropathy.

METHODS

Intracranial structures pertinent to pterional craniotomy extradural anterior clinoidectomy were carefully studied in 10 dry craniums and 10 cranial bases with dura mater. Important parameters of these structures were measured. Stepwise dissections simulating pterional craniotomy extradural anterior clinoidectomy were performed in 20 cadaver heads bilaterally. Pterional craniotomy extradural anterior clinoidectomy was then applied to 12 patients (13 eyes) with traumatic optic neuropathy and severe visual dysfunction.

RESULTS

The anatomic features and their variations of optic canal, ophthalmic artery, falciform ligament, and Zinn's ring (annular tendon) were studied and measured in detail. Extensive opening of the optic canal and optic nerve sheath was successfully achieved in all 12 patients without major surgical complications. Significant visual acuity improvement occurred in eight (nine eyes) out of our 12 patients after surgery. The surgical techniques and advantages of pterional craniotomy extradural anterior clinoidectomy for optic nerve decompression are presented and discussed in detail.

CONCLUSION

Pterional craniotomy extradural anterior clinoidectomy is a promising new alternative approach for optic nerve decompression in patients with traumatic optic neuropathy.

The "yo-yo" technique to prevent cerebrospinal fluid rhinorrhea after anterior clinoidectomy for proximal internal carotid artery aneurysms

OBJECTIVE

Resection of the anterior clinoid process is important for the exposure of aneurysms on clinoidal and supraclinoidal segments of the internal carotid artery. Cerebrospinal fluid (CSF) rhinorrhea can complicate anterior clinoidectomy when the optic strut is pneumatized and its removal communicates the subarachnoid space with the sphenoid sinus. We present a technique for repairing this defect and preventing CSF rhinorrhea.

METHODS

A suture is secured around a strip of temporalis muscle, which is then pushed through the opening in the optic strut completely into the sphenoid sinus. The ends of suture that trail the muscle are used to retract the muscle from the sphenoid sinus back into the optic strut. The suture is trimmed and the repair is covered with sealant or fibrin glue.

RESULTS

During an 8-year period in which 127 patients with proximal internal carotid artery aneurysms that required anterior clinoidectomy were treated, pneumatized optic struts were encountered in 14 patients (11%). Four patients were treated with the "yo-yo" technique, none of whom experienced CSF rhinorrhea. Before using this technique, 10 patients were managed with standard packing techniques (wax, muscle, and gel foam) and four of these patients subsequently experienced CSF rhinorrhea (40%). In these four patients, all required reoperation with either craniotomy and packing with pericranium (one patient), Couldwell-Luc procedure (one patient), or endoscopic transnasal obliteration of the sphenoid sinus with fat (two patients).

CONCLUSION

The "yo-yo" technique of tightly wedging a muscle plug into the optic strut proved to be simple, fast, and effective, preventing CSF rhinorrhea in all patients in whom it was applied. Although experience with this technique is limited, reversing the direction of packing and pulling muscle from the sphenoid sinus into the optic strut eliminated a complication that occurred in 40% of patients with standard packing techniques.

Optic nerve decompression for orbitofrontal fibrous dysplasia: recent development of surgical technique and equipment

OBJECTIVES

Orbitofrontal fibrous dysplasia often involves the bony orbit and optic canal. Although fibrous dysplasia reportedly produces compression of the optic nerve leading to visual disturbances, optic nerve decompression in patients without clinical signs of optic neuropathy remains controversial. We describe the recent development of surgical techniques and equipment for optic nerve decompression in orbitofrontal fibrous dysplasia.

METHODS

Optic nerve decompression was performed prophylactically for five patients and therapeutically for one patient using the transcranial extradural route. A high-speed drill and continuous suction-irrigation system has been used in five patients since 1998, and an ultrasonic bone curette in two patients since 2004.

RESULTS

The continuous suction-irrigation system was particularly effective for decreasing heat transfer and thus preventing thermal injury to the optic nerve from the high-speed drill. The ultrasonic bone curette was also effective, allowing bone removal with minimal pressure from the tip of the handpiece and without catching cotton pledgets or damaging surrounding tissues. Orbital dystopias and craniofacial deformities induced by fibrous dysplasia were also successfully corrected. Postoperatively, disturbance in visual function was present in only two patients. Mean follow-up period was 4.9 years.

CONCLUSIONS

This equipment may contribute to the development of new modalities for optic nerve decompression in orbitofrontal fibrous dysplasia.