An isolated insect leg's passive recovery from dorso-ventral perturbations

Spatio-temporal distribution and genetic background of elastic proteins inside the chitin/chitosan matrix of insects including their functional significance for locomotion

In insects, cuticle proteins interact with chitin and chitosan of the exoskeleton forming crystalline, amorphic or composite material structures. The biochemical and mechanical composition of the structure defines the cuticle's physical properties and thus how the insect cuticle behaves under mechanical stress. The tissue-specific ratio between chitin and chitosan and its pattern of deacetylation are recognized and interpreted by cuticle proteins depending on their local position in the body. Despite previous research, the assembly of the cuticle composites in time and space including its functional impact is widely unexplored. This review is devoted to the genetics underlying the temporal and spatial distribution of elastic proteins and the potential function of elastic proteins in insects with a focus on Resilin in the fruit fly Drosophila. The potential impact and function of localized patches of elastic proteins is discussed for movements in leg joints, locomotion and damage resistance of the cuticle. We conclude that an interdisciplinary research approach serves as an integral example for the molecular mechanisms of generation and interpretation of the chitin/chitosan matrix, not only in Drosophila but also in other arthropod species, and might help to synthesize artificial material composites.

Anisotropic compliance of robot legs improves recovery from swing-phase collisions

Uneven terrain in natural environments challenges legged locomotion by inducing instability and causing limb collisions. During the swing phase, the limb releases from the ground and arcs forward to target a secure next foothold. In natural environments leg-obstacle collisions may occur during the swing phase which can result in instability, and may require contact sensing and trajectory re-planning if a collision occurs. However, collision detection and response often requires computationally- and temporally-expensive control strategies. Inspired by low stiffness limbs that can pass past obstacles in small insects and running birds, we investigated a passive method for overcoming swing-collisions. We implemented virtual compliance control in a robot leg that allowed us to systematically vary the limb stiffness and ultimately its response to collisions with obstacles in the environment. In addition to applying a standard positional control during swing motion, we developed two virtual compliance methods: (1) an isotropic compliance for which perturbations in thexandydirections generated the same stiffness response, and (2) a vertical anisotropic compliance in which a decrease of the upwardyvertical limb stiffness enabled the leg to move upwards more freely. The virtual compliance methods slightly increased variability along the limb's planned pathway, but the anisotropic compliance control improved the successful negotiation of step obstacles by over 70% compared to isotropic compliance and positional control methods. We confirmed these findings in simulation and using a self-propelling bipedal robot walking along a linear rail over bumpy terrain. While the importance of limb compliance for stance interactions have been known, our results highlight how limb compliance in the swing-phase can enhance walking performance in naturalistic environments.

Survey of biomechanical aspects of arthropod terrestrialisation - Substrate bound legged locomotion

Arthropods are the most diverse clade on earth with regard to both species number and variability of body plans. Their general body plan is characterised by variable numbers of legs, and many-legged locomotion is an essential aspect of many aquatic and terrestrial arthropod species. Moreover, arthropods belong to the first groups of animals to colonise subaerial habitats, and they did so repeatedly and independently in a couple of clades. Those arthropod clades that colonised land habitats were equipped with highly variable body plans and locomotor apparatuses. Proceeding from their respective specific anatomies, they were challenged with strongly changing environmental conditions as well as altered physical and physiological constraints. This review explores the transitions from aquatic to terrestrial habitats across the different arthropod body plans and explains the major mechanisms and principles that constrain design and function of a range of locomotor apparatuses. Important aspects of movement physiology addressed here include the effects of different numbers of legs, different body sizes, miniaturisation and simplification of body plans and different ratios of inertial and damping forces. The article's focus is on continuous legged locomotion, but related ecological and behavioural aspects are also taken into account.

History-dependent perturbation response in limb muscle

Muscle mediates movement but movement is typically unsteady and perturbed. Muscle is known to behave non-linearly and with history-dependent properties during steady locomotion, but the importance of history dependence in mediating muscle function during perturbations remains less clear. To explore the capacity of muscles to mitigate perturbations during locomotion, we constructed a series of perturbations that varied only in kinematic history, keeping instantaneous position, velocity and time from stimulation constant. We found that the response of muscle to a perturbation is profoundly history dependent, varying 4-fold as baseline frequency changes, and dissipating energy equivalent to ∼6 times the kinetic energy of all the limbs in 5 ms (nearly 2400 W kg^-1). Muscle energy dissipation during a perturbation is predicted primarily by the force at the onset of the perturbation. This relationship holds across different frequencies and timings of stimulation. This history dependence behaves like a viscoelastic memory producing perturbation responses that vary with the frequency of the underlying movement.

Effects of force detecting sense organs on muscle synergies are correlated with their response properties

Sense organs that monitor forces in legs can contribute to activation of muscles as synergist groups. Previous studies in cockroaches and stick insects showed that campaniform sensilla, receptors that encode forces via exoskeletal strains, enhance muscle synergies in substrate grip. However synergist activation was mediated by different groups of receptors in cockroaches (trochanteral sensilla) and stick insects (femoral sensilla). The factors underlying the differential effects are unclear as the responses of femoral campaniform sensilla have not previously been characterized. The present study characterized the structure and response properties (via extracellular recording) of the femoral sensilla in both insects. The cockroach trochantero-femoral (TrF) joint is mobile and the joint membrane acts as an elastic antagonist to the reductor muscle. Cockroach femoral campaniform sensilla show weak discharges to forces in the coxo-trochanteral (CTr) joint plane (in which forces are generated by coxal muscles) but instead encode forces directed posteriorly (TrF joint plane). In stick insects, the TrF joint is fused and femoral campaniform sensilla discharge both to forces directed posteriorly and forces in the CTr joint plane. These findings support the idea that receptors that enhance synergies encode forces in the plane of action of leg muscles used in support and propulsion.

Intersegmental coupling and recovery from perturbations in freely running cockroaches

Cockroaches are remarkably stable runners, exhibiting rapid recovery from external perturbations. To uncover the mechanisms behind this important behavioral trait, we recorded leg kinematics of freely running animals in both undisturbed and perturbed trials. Functional coupling underlying inter-leg coordination was monitored before and during localized perturbations, which were applied to single legs via magnetic impulses. The resulting transient effects on all legs and the recovery times to normal pre-perturbation kinematics were studied. We estimated coupling architecture and strength by fitting experimental data to a six-leg-unit phase oscillator model. Using maximum-likelihood techniques, we found that a network with nearest-neighbor inter-leg coupling best fitted the data and that, although coupling strengths vary among preparations, the overall inputs entering each leg are approximately balanced and consistent. Simulations of models with different coupling strengths encountering perturbations suggest that the coupling schemes estimated from our experiments allow animals relatively fast and uniform recoveries from perturbations.

Level locomotion in wood ants: evidence for grounded running

In order to better understand the strategies of locomotion in small insects, we have studied continuous level locomotion of the wood ant species Formica polyctena. We determined the three-dimensional centre of mass kinematics during the gait cycle and recorded the ground reaction forces of single legs utilising a self-developed test site. Our findings show that the animals used the same gait dynamics across a wide speed range without dissolving the tripodal stride pattern. To achieve higher velocities, the ants proportionally increased stride length and stepping frequency. The centre of mass energetics indicated a bouncing gait, in which horizontal kinetic and gravitational potential energy fluctuated in close phase. We determined a high degree of compliance especially in the front legs, as the effective leg length was nearly halved during the contact phase. This leads to only small vertical oscillations of the body, which are important in maintaining ground contact. Bouncing gaits without aerial phases seem to be a common strategy in small runners and can be sufficiently described by the bipedal spring-loaded inverted pendulum model. Thus, with our results, we provide evidence that wood ants perform 'grounded running'.

Passive joint forces are tuned to limb use in insects and drive movements without motor activity

Background

Limb movements are generally driven by active muscular contractions working with and against passive forces arising in muscles and other structures. In relatively heavy limbs, the effects of gravity and inertia predominate, whereas in lighter limbs, passive forces intrinsic to the limb are of greater consequence. The roles of passive forces generated by muscles and tendons are well understood, but there has been little recognition that forces originating within joints themselves may also be important, and less still that these joint forces may be adapted through evolution to complement active muscle forces acting at the same joint.

Results

We examined the roles of passive joint forces in insect legs with different arrangements of antagonist muscles. We first show that passive forces modify actively generated movements of a joint across its working range, and that they can be sufficiently strong to generate completely passive movements that are faster than active movements observed in natural behaviors. We further demonstrate that some of these forces originate within the joint itself. In legs of different species adapted to different uses (walking, jumping), these passive joint forces complement the balance of strength of the antagonist muscles acting on the joint. We show that passive joint forces are stronger where they assist the weaker of two antagonist muscles.

Conclusions

In limbs where the dictates of a key behavior produce asymmetry in muscle forces, passive joint forces can be coadapted to provide the balance needed for the effective generation of other behaviors.

•

Limb movements are assisted by passive forces arising within joints

•

Functional cyclic movements can be generated by a single motor neuron

•

Joint forces are matched to the strength of antagonist muscles across species

•

Passive joint properties can transfer force from a stronger to a weaker muscle

Instantaneous kinematic phase reflects neuromechanical response to lateral perturbations of running cockroaches

Instantaneous kinematic phase calculation allows the development of reduced-order oscillator models useful in generating hypotheses of neuromechanical control. When perturbed, changes in instantaneous kinematic phase and frequency of rhythmic movements can provide details of movement and evidence for neural feedback to a system-level neural oscillator with a time resolution not possible with traditional approaches. We elicited an escape response in cockroaches (Blaberus discoidalis) that ran onto a movable cart accelerated laterally with respect to the animals' motion causing a perturbation. The specific impulse imposed on animals (0.50 [Formula: see text] 0.04 m s[Formula: see text]; mean, SD) was nearly twice their forward speed (0.25 [Formula: see text] 0.06 m s[Formula: see text]. Instantaneous residual phase computed from kinematic phase remained constant for 110 ms after the onset of perturbation, but then decreased representing a decrease in stride frequency. Results from direct muscle action potential recordings supported kinematic phase results in showing that recovery begins with self-stabilizing mechanical feedback followed by neural feedback to an abstracted neural oscillator or central pattern generator. Trials fell into two classes of forward velocity changes, while exhibiting statistically indistinguishable frequency changes. Animals pulled away from the side with front and hind legs of the tripod in stance recovered heading within 300 ms, whereas animals that only had a middle leg of the tripod resisting the pull did not recover within this period. Animals with eight or more legs might be more robust to lateral perturbations than hexapods.

From bouncy legs to poisoned arrows: elastic movements in invertebrates

Elastic mechanisms in the invertebrates are fantastically diverse, yet much of this diversity can be captured by examining just a few fundamental physical principles. Our goals for this commentary are threefold. First, we aim to synthesize and simplify the fundamental principles underlying elastic mechanisms and show how different configurations of basic building blocks can be used for different functions. Second, we compare single rapid movements and rhythmic movements across six invertebrate examples – ranging from poisonous cnidarians to high-jumping froghoppers – and identify remarkable functional properties arising from their underlying elastic systems. Finally, we look to the future of this field and find two prime areas for exciting new discoveries – the evolutionary dynamics of elastic mechanisms and biomimicry of invertebrate elastic materials and mechanics.

Shifts in a single muscle's control potential of body dynamics are determined by mechanical feedback

Muscles are multi-functional structures that interface neural and mechanical systems. Muscle work depends on a large multi-dimensional space of stimulus (neural) and strain (mechanical) parameters. In our companion paper, we rewrote activation to individual muscles in intact, behaving cockroaches (Blaberus discoidalis L.), revealing a specific muscle's potential to control body dynamics in different behaviours. Here, we use those results to provide the biologically relevant parameters for in situ work measurements. We test four hypotheses about how muscle function changes to provide mechanisms for the observed control responses. Under isometric conditions, a graded increase in muscle stress underlies its linear actuation during standing behaviours. Despite typically absorbing energy, this muscle can recruit two separate periods of positive work when controlling running. This functional change arises from mechanical feedback filtering a linear increase in neural activation into nonlinear work output. Changing activation phase again led to positive work recruitment, but at different times, consistent with the muscle's ability to also produce a turn. Changes in muscle work required considering the natural sequence of strides and separating swing and stance contributions of work. Both in vivo control potentials and in situ work loops were necessary to discover the neuromechanical coupling enabling control.

Neural control of unloaded leg posture and of leg swing in stick insect, cockroach, and mouse differs from that in larger animals

Stick insect (Carausius morosus) leg muscles contract and relax slowly. Control of stick insect leg posture and movement could therefore differ from that in animals with faster muscles. Consistent with this possibility, stick insect legs maintained constant posture without leg motor nerve activity when the animals were rotated in air. That unloaded leg posture was an intrinsic property of the legs was confirmed by showing that isolated legs had constant, gravity-independent postures. Muscle ablation experiments, experiments showing that leg muscle passive forces were large compared with gravitational forces, and experiments showing that, at the rest postures, agonist and antagonist muscles generated equal forces indicated that these postures depended in part on leg muscles. Leg muscle recordings showed that stick insect swing motor neurons fired throughout the entirety of swing. To test whether these results were specific to stick insect, we repeated some of these experiments in cockroach (Periplaneta americana) and mouse. Isolated cockroach legs also had gravity-independent rest positions and mouse swing motor neurons also fired throughout the entirety of swing. These data differ from those in human and horse but not cat. These size-dependent variations in whether legs have constant, gravity-independent postures, in whether swing motor neurons fire throughout the entirety of swing, and calculations of how quickly passive muscle force would slow limb movement as limb size varies suggest that these differences may be caused by scaling. Limb size may thus be as great a determinant as phylogenetic position of unloaded limb motor control strategy.

Neuromechanical response of musculo-skeletal structures in cockroaches during rapid running on rough terrain

A musculo-skeletal structure can stabilize rapid locomotion using neural and/or mechanical feedback. Neural feedback results in an altered feedforward activation pattern, whereas mechanical feedback using visco-elastic structures does not require a change in the neural motor code. We selected musculo-skeletal structures in the cockroach (Blaberus discoidalis)because their single motor neuron innervation allows the simplest possible characterization of activation. We ran cockroaches over a track with randomized blocks of heights up to three times the animal's `hip' (1.5 cm),while recording muscle action potentials (MAPs) from a set of putative control musculo-skeletal structures (femoral extensors 178 and 179). Animals experienced significant perturbations in body pitch, roll and yaw, but reduced speed by less than 20%. Surprisingly, we discovered no significant difference in the distribution of the number of MAPs, the interspike interval, burst phase or interburst period between flat and rough terrain trials. During a few very large perturbations or when a single leg failed to make contact throughout stance, neural feedback was detectable as a phase shift of the central rhythm and alteration of MAP number. System level responses of appendages were consistent with a dominant role of mechanical feedback. Duty factors and gait phases did not change for cockroaches running on flat versus rough terrain. Cockroaches did not use a follow-the-leader gait requiring compensatory corrections on a step-by-step basis. Arthropods appear to simplify control on rough terrain by rapid running that uses kinetic energy to bridge gaps between footholds and distributed mechanical feedback to stabilize the body.