Optical mapping of ground reaction force dynamics in freely behaving Drosophila melanogaster larvae

During locomotion, soft-bodied terrestrial animals solve complex control problems at substrate interfaces, but our understanding of how they achieve this without rigid components remains incomplete. Here, we develop new all-optical methods based on optical interference in a deformable substrate to measure ground reaction forces (GRFs) with micrometre and nanonewton precision in behaving Drosophila larvae. Combining this with a kinematic analysis of substrate-interfacing features, we shed new light onto the biomechanical control of larval locomotion. Crawling in larvae measuring ~1 mm in length involves an intricate pattern of cuticle sequestration and planting, producing GRFs of 1-7 µN. We show that larvae insert and expand denticulated, feet-like structures into substrates as they move, a process not previously observed in soft-bodied animals. These 'protopodia' form dynamic anchors to compensate counteracting forces. Our work provides a framework for future biomechanics research in soft-bodied animals and promises to inspire improved soft-robot design.

Embodied mechanisms of motor control in the octopus

Achieving complex behavior in soft-bodied animals is a hard task, because their body morphology is not constrained by a fixed number of jointed elements, as in skeletal animals, and thus the control system has to deal with practically an infinite number of control variables (degrees of freedom). Almost 30 years of research on Octopus vulgaris motor control has revealed that octopuses efficiently control their body with strategies that emerged during the adaptive coevolution of their nervous system and body morphology. In this minireview, we highlight principles of embodied organization that were revealed by studying octopus motor control, and that are used as inspiration for soft robotics. We describe the evolved solutions to the problem, implemented from the lowest level, the muscular system, to the network organization in higher motor control centers of the octopus brain. We show how the higher motor control centers, where the sensory-motor interface lies, can control and coordinate limbs with large degrees of freedom without using body-part maps to represent sensory and motor information, as they do in vertebrates. We demonstrate how this unique control mechanism, which allows efficient control of the body in a large variety of behaviors, is embodied within the animal's body morphology.

Manduca sexta caterpillars parasitized by the wasp Cotesia congregata stop chewing despite an intact motor system

The parasitic wasp Cotesia congregata suppresses feeding in its host, the caterpillar Manduca sexta, during specific periods of wasp development. We examined both feeding behaviour and the neurophysiology of the mandibular closer muscle in parasitized and unparasitized control M. sexta to determine how the wasp may accomplish this. To test whether the wasps activated a pre-existing host mechanism for feeding cessation, we examined the microstructure of feeding behaviour in caterpillars that stopped feeding due to illness-induced anorexia or an impending moult. These microstructures were compared with that shown by parasitized caterpillars. While there were overall differences between parasitized and unparasitized caterpillars, the groups showed similar progression in feeding microstructure as feeding ended, suggesting a common pattern for terminating a meal. Parasitized caterpillars also consumed less leaf area in 100 bites than control caterpillars at around the same time their feeding microstructure changed. The decline in food consumption was accompanied by fewer spikes per burst and shorter burst durations in chewing muscle electromyograms. Similar extracellular results were obtained from the motorneuron of the mandibular closer muscle. However, chewing was dramatically re-activated in non-feeding parasitized caterpillars if the connectives posterior to the suboesophageal ganglion were severed. The same result was observed in unparasitized caterpillars given the same treatment. Our results suggest that the reduced feeding in parasitized caterpillars is not due to damage to the central pattern generator (CPG) for chewing, motor nerves or chewing muscles, but is more likely to be due to a suppression of chewing CPG activity by ascending or descending inputs.

A Proprioceptive Soft Robot Module Based on Supercoiled Polymer Artificial Muscle Strings

In this paper, a multi-functional soft robot module that can be used to constitute a variety of soft robots is proposed. The body of the soft robot module made of rubber is in the shape of a long strip, with cylindrical chambers at both the top end and bottom end of the module for the function of actuators and sensors. The soft robot module is driven by supercoiled polymer artificial muscle (SCPAM) strings, which are made from conductive nylon sewing threads. Artificial muscle strings are embedded in the chambers of the module to control its deformation. In addition, SCPAM strings are also used for the robot module’s sensing based on the linear relationship between the string’s length and their resistance. The bending deformation of the robot is measured by the continuous change of the sensor’s resistance during the deformation of the module. Prototypes of an inchworm-like crawling robot and a soft robotic gripper are made, whose crawling ability and grasping ability are tested, respectively. We envision that the proposed proprioceptive soft robot module could potentially be used in other robotic applications, such as continuum robotic arm or underwater robot.

3D Printed Biomimetic Soft Robot with Multimodal Locomotion and Multifunctionality

Soft robots can outperform traditional rigid robots in terms of structural compliance, enhanced safety, and efficient locomotion. However, it is still a grand challenge to design and efficiently manufacture soft robots with multimodal locomotion capability together with multifunctionality for navigating in dynamic environments and meanwhile performing diverse tasks in real-life applications. This study presents a 3D-printed soft robot, which has spatially varied material compositions (0-50% particle-polymer weight ratio), multiscale hierarchical surface structures (10 nm, 1 μm, and 70 μm features on 5 mm wide robot footpads), and consists of functional components for multifunctionality. A novel additive manufacturing process, magnetic-field-assisted projection stereolithography (M-SL), is innovated to fabricate the proposed robot with prescribed material heterogeneity and structural hierarchy, and hence locally engineered flexibility and preprogrammed functionality. The robot incorporates untethered magnetic actuation with superior multimodal locomotion capabilities for completing tasks in harsh environments, including effective load carrying (up to ∼30 times of its own weight) and obstacle removing (up to 6.5 times of its own weight) in congested spaces (e.g., 5 mm diameter glass tube, gastric folds of a pig stomach) by gripping or pushing objects (e.g., 0.3-8 times of its own weight with a velocity up to 31 mm/s). Furthermore, the robot footpads are covered by multiscale hierarchical spike structures with features spanning from nanometers (e.g., 10 nm) to millimeters. Such high structural hierarchy enables multiple superior functions, including changing a naturally hydrophilic surface to hydrophobic, hairy adhesion, and excellent cell attaching and growth properties. It is found that the hairy adhesion and the engineered hydrophobicity of the robot footpad enable robust navigation in wet and slippery environments. The multimaterial multiscale robot design and the direct digital manufacturing method enable complex and versatile robot behaviors in sophisticated environments, facilitating a wide spectrum of real-life applications.

The control of nocifensive movements in the caterpillar Manduca sexta

In response to a noxious stimulus on the abdomen, caterpillars lunge their head towards the site of stimulation. This nocifensive 'strike' behavior is fast (∼0.5 s duration), targeted and usually unilateral. It is not clear how the fast strike movement is generated and controlled, because caterpillar muscle develops peak force relatively slowly (∼1 s) and the baseline hemolymph pressure is low (<2 kPa). Here, we show that strike movements are largely driven by ipsilateral muscle activation that propagates from anterior to posterior segments. There is no sustained pre-strike muscle activation that would be expected for movements powered by the rapid release of stored elastic energy. Although muscle activation on the ipsilateral side is correlated with segment shortening, activity on the contralateral side consists of two phases of muscle stimulation and a marked decline between them. This decrease in motor activity precedes rapid expansion of the segment on the contralateral side, presumably allowing the body wall to stretch more easily. The subsequent increase in contralateral motor activation may slow or stabilize movements as the head reaches its target. Strike behavior is therefore a controlled fast movement involving the coordination of muscle activity on each side and along the length of the body.

Dynamic modeling and simulation of inchworm movement towards bio-inspired soft robot design

Inchworms have been one of the most widely used bionic templates for designing soft robotic devices. Bioresearch has shown that muscles of inchworms exhibit nonlinear hysteresis and their body structures are with hydrostatic skeleton. But effects of these properties on their dynamic movements have not been studied yet. In this work, a dynamic model based on the principle of virtual power of an inchworm is established to examine the problem. A spring-damper model with time-varying stiffness and damping coefficients is used to model controllable nonlinear properties of the inchworm muscles. The hydrostatic skeleton is applied to the model as a constant volume constraint for each segment. Based on this, simulations of three typical movements including omega-shaped arching motion, cantilevered probing motion and surprising fast looping motion are presented. The effects of the nonlinear properties including variable stiffness and damping properties of muscles on these dynamic behaviors of inchworms are illustrated. Some inspiration for designing bio-inspired crawling robots and soft slender robotic devices is obtained. And we think this work will hopefully provide better understanding and guidance for design and control of these robotic devices.

Reachability Improvement of a Climbing Robot Based on Large Deformations Induced by Tri-Tube Soft Actuators

Locomotion of soft-bodied organisms, such as amoeba, worms, and octopuses, is safe, robust, and adaptable and has great promise for applications in complex environments. While such organisms fully exploit the potential provided by their soft structures, engineering solutions commonly constrain soft deformation in favor of controllability. In this study, we study how soft deformations can enhance the climbing capabilities of a robot. We introduce a robot called Longitudinally Extensible Continuum-robot inspired by Hirudinea (LEeCH), which has few shape constraints. Inspired by real leeches, LEeCH has a flexible extensible body and two suction cups at the ends. It is capable of performing 3D climbing locomotion using two suction cups driven by vacuum pumps and tri-tube soft actuators which have only three DC motors. The large deformations occurring in LEeCH extend its workspace compared to robots based on constant curvature models, and we show successful locomotion transition from one surface to another at angles between 0° and 180° in experiment. We develop a model based on multibody dynamics to predict the nonlinear deformations of the robot, which we verify in the experiment. The model reveals a nondimensional morphological parameter, which relates the robot's shape to its mass, stiffness, and size. The workspace of LEeCH as a function of this parameter is studied in simulation and is shown to move beyond that of robots based on constant curvature models.

The design and development of Branch Bot: a branch-crawling, caterpillar-inspired, soft robot

A soft climbing robot has the potential to access locations such as wiring ducts and tree canopies that are unreachable by humans and traditional rigid robots. In addition, a soft robot is robust and can fall without damaging itself or its environment. We present a soft, branch-crawling robot that is inspired by the passive gripping mechanisms used by caterpillars. The conformability of the robot’s soft body makes it uniquely suited to move in a complex 3D environment. A key innovation is that grip release is actively controlled and coordinated with propulsion generated by stored elastic energy. The robot is molded from silicone rubber and actuated using remote motor-tendons coupled to the structure through Bowden cables. Grip is achieved passively through an elastic flexure that pushes a compliant finger against the dowel. Experimental results show that the gripper is easily able to support the weight of the robot, and that the body structure allows the robot to crawl horizontally, vertically, and along branches. This robot demonstrates some key advantages of a soft robotic platform over traditional rigid robots.

A Fully Three-Dimensional Printed Inchworm-Inspired Soft Robot with Magnetic Actuation

In the field of robotics, researchers are aiming to develop soft or partially soft bodied robots that utilize the motion and control system of various living organisms in nature. These robots have the potential to be robust and versatile, even safer for human interaction compared to traditional rigid robots. Soft robots based on biomimetic principles are being designed for real life applications by paying attention to different shape, geometry, and actuation systems in these organisms that respond to surrounding environments and stimuli. Especially, caterpillars or inchworms have garnered attention due to their soft compliant structure and crawling locomotion system making them ideal for maneuvering in congested spaces as a transport function. Currently, there are two major challenges with design and fabrication of such soft robots: using an efficient actuation system and developing a simple manufacturing process. Different actuation systems have been explored, which include shape memory alloy based coils and hydraulic and pneumatic actuators. However, the intrinsic limitations due to overall size and control system of these actuators prevent their integration in flexibility, lightweight, and compact manner, limiting practical and untethered applications. In comparison, magnetic actuation demonstrates simple wireless noncontact control. In terms of manufacturing process, additive manufacturing has emerged as an effective tool for obtaining structural complexity with high resolution, accuracy, and desired geometry. This study proposes a fully three-dimensional (3D) printed, monolithic, and tetherless inchworm-inspired soft robot that uses magnetic actuation for linear locomotion and crawling. Its structure is multimaterial heterogeneous particle-polymer composite with locally programmed material compositions. This soft robot is directly printed in one piece from a 3D computer model, without any manual assembly or complex processing steps, and it can be controlled by an external wireless force. This article presents its design and manufacturing with the novel magnetic field assisted projection stereolithography technique. Analytical models and numerical simulations of the crawling locomotion of the soft robot are also presented and compared with the experimental results of the 3D printed prototype. The overall locomotion mechanism of the magnetically actuated soft robot is evaluated with friction tests and stride efficiency analysis.

Robotics-inspired biology

For centuries, designers and engineers have looked to biology for inspiration. Biologically inspired robots are just one example of the application of knowledge of the natural world to engineering problems. However, recent work by biologists and interdisciplinary teams have flipped this approach, using robots and physical models to set the course for experiments on biological systems and to generate new hypotheses for biological research. We call this approach robotics-inspired biology; it involves performing experiments on robotic systems aimed at the discovery of new biological phenomena or generation of new hypotheses about how organisms function that can then be tested on living organisms. This new and exciting direction has emerged from the extensive use of physical models by biologists and is already making significant advances in the areas of biomechanics, locomotion, neuromechanics and sensorimotor control. Here, we provide an introduction and overview of robotics-inspired biology, describe two case studies and suggest several directions for the future of this exciting new research area.

Soft Ultrathin Electronics Innervated Adaptive Fully Soft Robots

Soft robots outperform the conventional hard robots on significantly enhanced safety, adaptability, and complex motions. The development of fully soft robots, especially fully from smart soft materials to mimic soft animals, is still nascent. In addition, to date, existing soft robots cannot adapt themselves to the surrounding environment, i.e., sensing and adaptive motion or response, like animals. Here, compliant ultrathin sensing and actuating electronics innervated fully soft robots that can sense the environment and perform soft bodied crawling adaptively, mimicking an inchworm, are reported. The soft robots are constructed with actuators of open-mesh shaped ultrathin deformable heaters, sensors of single-crystal Si optoelectronic photodetectors, and thermally responsive artificial muscle of carbon-black-doped liquid-crystal elastomer (LCE-CB) nanocomposite. The results demonstrate that adaptive crawling locomotion can be realized through the conjugation of sensing and actuation, where the sensors sense the environment and actuators respond correspondingly to control the locomotion autonomously through regulating the deformation of LCE-CB bimorphs and the locomotion of the robots. The strategy of innervating soft sensing and actuating electronics with artificial muscles paves the way for the development of smart autonomous soft robots.

The neuromechanics of proleg grip release

Because soft animals are deformable their locomotion is particularly affected by external forces and they are expected to face challenges controlling movements in different environments and orientations. We have used the caterpillar Manduca sexta to study neuromechanical strategies of soft-bodied scansorial locomotion. Manduca locomotion critically depends on the timing of proleg grip release which is mediated by the principle planta retractor muscle and its single motoneuron, PPR. During upright crawling, PPR firing frequency increases approximately 0.6 seconds before grip release but during upside-down crawling, this activity begins significantly earlier, possibly pre-tensioning the muscle. Under different loading conditions the timing of PPR activity changes relative to the stance/swing cycle. PPR motor activity is greater during upside-down crawling but these frequency changes are too small to produce significant differences in muscle force. Detailed observation of the proleg tip show that it swells before the retractor muscle is activated. This small movement is correlated with the activation of more posterior body segments suggesting that it results from indirect mechanical effects. The timing and direction of this proleg displacement implies that proleg grip release is a dynamic interplay of mechanics and active neural control.

Aquatic versus terrestrial crab skeletal support: morphology, mechanics, molting and scaling

The transition from aquatic to terrestrial environments places significant mechanical challenges on skeletal support systems. Crabs have made this transition multiple times and are the largest arthropods to inhabit both environments. Furthermore, they alternate between rigid and hydrostatic skeletons, making them an interesting system to examine mechanical adaptations in skeletal support systems. I hypothesized that terrestrial crabs have modified morphology to enhance mechanical stiffness and that rigid and hydrostatic skeletons scale differently from each other, with stronger allometric relationships on land. Using the aquatic blue crab, Callinectes sapidus, and the terrestrial blackback land crab, Gecarcinus lateralis, I measured and compared body mass, merus morphology (dimensions, cuticle thickness, and I) and mechanics (EI, E, critical stress, and hydrostatic pressure) of rigid and hydrostatic stage crabs encompassing a range of sizes (C. sapidus: 1.5-133 g, N≤24; G. lateralis: 22-70 g, N≤15). Results revealed that rigid G. lateralis has similar morphology (L/D and T/D) than C. sapidus, but the mechanics and most scaling relationships are the same. Hydrostatic land crabs differ from aquatic crabs by having different morphology (thinner cuticle), mechanics (greater internal pressures), and scaling relationship (cuticle thickness). These results suggest that the rigid crab body plan is inherently overbuilt and sufficient to deal with the greater gravitational loading that occurs on land, while mechanical adaptations are important for hydrostatically supported crabs. Compared to other arthropods and hydrostatic animals, crabs possess distinct strategies for adapting mechanically to life on land.

Dynamical analysis and development of a biologically inspired SMA caterpillar robot

With the goal of robustly designing and fabricating a soft robot based on a caterpillar featuring shape memory alloy (SMA) actuators, analytical and numerical models for a soft robot were created based on the forward crawling motion of the Manduca sexta caterpillar. The analytical model features a rod theory and the mechanics of undulation were analyzed using a motion pattern based on the 'Witch of Agnesi' curve. Complementing these models, experiments on a SMA actuator sample were performed in order to determine its flexural rigidity and curvature as a function of the actuation voltage. A series of these actuators can be modeled as a system of rigid bodies connected by torsional springs. As these bodies are actuated according to the motion pattern based on the individual caterpillar segments, ground contact forces are calculated and analyzed to determine the requirements of successful forward locomotion. The energetics of the analytical and numerical models are then compared and discussed.

Changes in tarsal morphology and attachment ability to rough surfaces during ontogenesis in the beetle Gastrophysa viridula (Coleoptera, Chrysomelidae)

Insects live in a three-dimensional space, and need to be able to attach to different types of surfaces in a variety of environmental and behavioral contexts. Adult leaf beetles possess great attachment ability due to their hairy attachment pads. In contrast, their larvae depend on smooth pads to attach to the same host plant. We tested friction forces generated by larvae and adults of dock leaf beetles Gastrophysa viridula on different rough surfaces, and found that adults generate much higher attachment to various substrates than larvae, but are more susceptible to completely losing attachment ability on surfaces with "critical" roughness. Furthermore, sex-specific setal morphology has the effect that attachment forces of male adults are generally higher than those of females when adjusted for body weight. The results are discussed in the context of development, ecology, and changing behavioral strategies of successive life stages.

Softworms: the design and control of non-pneumatic, 3D-printed, deformable robots

Robots that can easily interact with humans and move through natural environments are becoming increasingly essential as assistive devices in the home, office and hospital. These machines need to be safe, effective, and easy to control. One strategy towards accomplishing these goals is to build the robots using soft and flexible materials to make them much more approachable and less likely to damage their environment. A major challenge is that comparatively little is known about how best to design, fabricate and control deformable machines. Here we describe the design, fabrication and control of a novel soft robotic platform (Softworms) as a modular device for research, education and public outreach. These robots are inspired by recent neuromechanical studies of crawling and climbing by larval moths and butterflies (Lepidoptera, caterpillars). Unlike most soft robots currently under development, the Softworms do not rely on pneumatic or fluidic actuators but are electrically powered and actuated using either shape-memory alloy microcoils or motor tendons, and they can be modified to accept other muscle-like actuators such as electroactive polymers. The technology is extremely versatile, and different designs can be quickly and cheaply fabricated by casting elastomeric polymers or by direct 3D printing. Softworms can crawl, inch or roll, and they are steerable and even climb steep inclines. Softworms can be made in any shape but here we describe modular and monolithic designs requiring little assembly. These modules can be combined to make multi-limbed devices. We also describe two approaches for controlling such highly deformable structures using either model-free state transition-reward matrices or distributed, mechanically coupled oscillators. In addition to their value as a research platform, these robots can be developed for use in environmental, medical and space applications where cheap, lightweight and shape-changing deformable robots will provide new performance capabilities.

A proprioceptive neuromechanical theory of crawling

The locomotion of many soft-bodied animals is driven by the propagation of rhythmic waves of contraction and extension along the body. These waves are classically attributed to globally synchronized periodic patterns in the nervous system embodied in a central pattern generator (CPG). However, in many primitive organisms such as earthworms and insect larvae, the evidence for a CPG is weak, or even non-existent. We propose a neuromechanical model for rhythmically coordinated crawling that obviates the need for a CPG, by locally coupling the local neuro-muscular dynamics in the body to the mechanics of the body as it interacts frictionally with the substrate. We analyse our model using a combination of analytical and numerical methods to determine the parameter regimes where coordinated crawling is possible and compare our results with experimental data. Our theory naturally suggests mechanisms for how these movements might arise in developing organisms and how they are maintained in adults, and also suggests a robust design principle for engineered motility in soft systems.

Use of von Frey filaments to assess nociceptive sensitization in the hornworm, Manduca sexta

BACKGROUND

The hornworm Manduca sexta exhibits a defensive strike to noxious assaults, a response that is robust and is easily observed by experimenters. Von Frey filaments and methods typical for studying nociception in other animals were used to assess the strike response in M. sexta.

NEW METHODS

A series of von Frey filaments was applied to the body wall in ascending order and the data generated were used to determine the strike threshold by (i) the up-and-down method, (ii) the first response method, and (iii) the simplified up-and-down order method (SUDO). The effect of a noxious pinch on strike threshold was assessed.

COMPARISON WITH EXISTING METHODS

To our knowledge none of these methods has been used on M. sexta previously, making the use of the up-and-down and SUDO methods the first in an invertebrate. The use of the first response method has been used in other invertebrates, and the method appears equally suited to M. sexta.

RESULTS

All three methods were successful in monitoring the threshold sensitivity to touch, which was lowered (sensitized) by tissue damage induced with a pinch. Sensitization lasted 19h.

CONCLUSIONS

All three methods of assessing nociception were successfully applied to quantify the defensive strike response in M. sexta, although the SUDO method required empirical assessment of which filament to start the test sequence with. The results revealed both short- and long-term sensitization. These methods should prove to be useful for quantifying sensitization in M. sexta.

Orientation-Dependent Changes in Single Motor Neuron Activity during Adaptive Soft-Bodied Locomotion

Recent major advances in understanding the organizational principles underlying motor control have focused on a small number of animal species with stiff articulated skeletons. These model systems have the advantage of easily quantifiable mechanics, but the neural codes underlying different movements are difficult to characterize because they typically involve a large population of neurons controlling each muscle. As a result, studying how neural codes drive adaptive changes in behavior is extremely challenging. This problem is highly simplified in the tobacco hawkmoth Manduca sexta, which, in its larval stage (caterpillar), is predominantly soft-bodied. Since each M. sexta muscle is innervated by one, occasionally two, excitatory motor neurons, the electrical activity generated by each muscle can be mapped to individual motor neurons. In the present study, muscle activation patterns were converted into motor neuron frequency patterns by identifying single excitatory junction potentials within recorded electromyographic traces. This conversion was carried out with single motor neuron resolution thanks to the high signal selectivity of newly developed flexible microelectrode arrays, which were specifically designed to record from M. sexta muscles. It was discovered that the timing of motor neuron activity and gait kinematics depend on the orientation of the plane of motion during locomotion. We report that, during climbing, the motor neurons monitored in the present study shift their activity to correlate with movements in the animal's more anterior segments. This orientation-dependent shift in motor activity is in agreement with the expected shift in the propulsive forces required for climbing. Our results suggest that, contrary to what has been previously hypothesized, M.sexta uses central command timing for adaptive load compensation.

Locomotion and attachment of leaf beetle larvae Gastrophysa viridula (Coleoptera, Chrysomelidae)

While adult green dock leaf beetles Gastrophysa viridula use tarsal adhesive setae to attach to and walk on smooth vertical surfaces and ceilings, larvae apply different devices for similar purposes: pretarsal adhesive pads on thoracic legs and a retractable pygopod at the 10th abdominal segment. Both are soft smooth structures and capable of wet adhesion. We studied attachment ability of different larval instars, considering the relationship between body weight and real contact area between attachment devices and the substrate. Larval gait patterns were analysed using high-speed video recordings. Instead of the tripod gait of adults, larvae walked by swinging contralateral legs simultaneously while adhering by the pygopod. Attachment ability of larval instars was measured by centrifugation on a spinning drum, revealing that attachment force decreases relative to weight. Contributions of different attachment devices to total attachment ability were investigated by selective disabling of organs by covering them with melted wax. Despite their smaller overall contact area, tarsal pads contributed to a larger extent to total attachment ability, probably because of their distributed spacing. Furthermore, we observed different behaviour in adults and larvae when centrifuged: while adults gradually slipped outward on the centrifuge drum surface, larvae stayed at the initial position until sudden detachment.

Template for robust soft-body crawling with reflex-triggered gripping

Caterpillars show a remarkable ability to get around in complex environments (e.g. tree branches). Part of this is attributable to crochets which allow the animal to firmly attach to a wide range of substrates. This introduces an additional challenge to locomotion, however, as the caterpillar needs a way to coordinate the release of the crochets and the activation of muscles to adjust body posture. Typical control models have focused on global coordination through a central pattern generator (CPG). This paper develops an alternative to the CPG, which accomplishes the same task and is robust to a wide range of body properties and control parameter variation. A one-dimensional model is proposed which consists of lumped masses connected by a network of springs, dampers and muscles. Computer simulations of the controller/model system are performed to verify its robustness and to permit comparison between the generated gaits and those observed in real caterpillars (specifically Manduca sexta.).

Locomotion of inchworm-inspired robot made of smart soft composite (SSC)

A soft-bodied robot made of smart soft composite with inchworm-inspired locomotion capable of both two-way linear and turning movement has been proposed, developed, and tested. The robot was divided into three functional parts based on the different functions of the inchworm: the body, the back foot, and the front foot. Shape memory alloy wires were embedded longitudinally in a soft polymer to imitate the longitudinal muscle fibers that control the abdominal contractions of the inchworm during locomotion. Each foot of the robot has three segments with different friction coefficients to implement the anchor and sliding movement. Then, utilizing actuation patterns between the body and feet based on the looping gait, the robot achieves a biomimetic inchworm gait. Experiments were conducted to evaluate the robot's locomotive performance for both linear locomotion and turning movement. Results show that the proposed robot's stride length was nearly one third of its body length, with a maximum linear speed of 3.6 mm s(-1), a linear locomotion efficiency of 96.4%, a maximum turning capability of 4.3 degrees per stride, and a turning locomotion efficiency of 39.7%.

Bone-free: soft mechanics for adaptive locomotion

Muscular hydrostats (such as mollusks), and fluid-filled animals (such as annelids), can exploit their constant-volume tissues to transfer forces and displacements in predictable ways, much as articulated animals use hinges and levers. Although larval insects contain pressurized fluids, they also have internal air tubes that are compressible and, as a result, they have more uncontrolled degrees of freedom. Therefore, the mechanisms by which larval insects control their movements are expected to reveal useful strategies for designing soft biomimetic robots. Using caterpillars as a tractable model system, it is now possible to identify the biomechanical and neural strategies for controlling movements in such highly deformable animals. For example, the tobacco hornworm, Manduca sexta, can stiffen its body by increasing muscular tension (and therefore body pressure) but the internal cavity (hemocoel) is not iso-barometric, nor is pressure used to directly control the movements of its limbs. Instead, fluid and tissues flow within the hemocoel and the body is soft and flexible to conform to the substrate. Even the gut contributes to the biomechanics of locomotion; it is decoupled from the movements of the body wall and slides forward within the body cavity at the start of each step. During crawling the body is kept in tension for part of the stride and compressive forces are exerted on the substrate along the axis of the caterpillar, thereby using the environment as a skeleton. The timing of muscular activity suggests that crawling is coordinated by proleg-retractor motoneurons and that the large segmental muscles produce anterograde waves of lifting that do not require precise timing. This strategy produces a robust form of locomotion in which the kinematics changes little with orientation. In different species of caterpillar, the presence of prolegs on particular body segments is related to alternative kinematics such as "inching." This suggests a mechanism for the evolution of different gaits through changes in the usage of prolegs, rather than, through extensive alterations in the motor program controlling the body wall. Some of these findings are being used to design and test novel control-strategies for highly deformable robots. These "softworm" devices are providing new insights into the challenges faced by any soft animal navigating in a terrestrial environment.

Scaling of the hydrostatic skeleton in the earthworm Lumbricus terrestris

The structural and functional consequences of changes in size or scale have been well studied in animals with rigid skeletons, but relatively little is known about scale effects in animals with hydrostatic skeletons. We used glycol methacrylate histology and microscopy to examine the scaling of mechanically important morphological features of the earthworm Lumbricus terrestris over an ontogenetic size range from 0.03 to 12.89 g. We found that L. terrestris becomes disproportionately longer and thinner as it grows. This increase in the length to diameter ratio with size means that, when normalized for mass, adult worms gain ~117% mechanical advantage during radial expansion, compared with hatchling worms. We also found that the cross-sectional area of the longitudinal musculature scales as body mass to the ~0.6 power across segments, which is significantly lower than the 0.66 power predicted by isometry. The cross-sectional area of the circular musculature, however, scales as body mass to the ~0.8 power across segments, which is significantly higher than predicted by isometry. By modeling the interaction of muscle cross-sectional area and mechanical advantage, we calculate that the force output generated during both circular and longitudinal muscle contraction scales near isometry. We hypothesize that the allometric scaling of earthworms may reflect changes in soil properties and burrowing mechanics with size.

A biomimetic approach for designing stent-graft structures: Caterpillar cuticle as design model

Stent-graft (SG) induced biomechanical mismatch at the aortic repair site forms the major reason behind postoperative hemodynamic complications. These complications arise from mismatched radial compliance and stiffness property of repair device relative to native aortic mechanics. The inability of an exoskeleton SG design (an externally stented rigid polyester graft) to achieve optimum balance between structural robustness and flexibility constrains its biomechanical performance limits. Therefore, a new SG design capable of dynamically controlling its stiffness and flexibility has been proposed in this study. The new design is adopted from the segmented hydroskeleton structure of a caterpillar cuticle and comprises of high performance polymeric filaments constructed in a segmented knit architecture. Initially, conceptual design models of caterpillar and SG were developed and later translated into an experimental SG prototype. The in-vitro biomechanical evaluation (compliance, bending moment, migration intensity, and viscoelasticity) revealed significantly better performance of hydroskeleton structure than a commercial SG device (Zenith(™) Flex SG) and woven Dacron(®) graft-prosthesis. Structural segmentation improved the biomechanical behaviour of new SG by inducing a three dimensional volumetric expansion property when the SG was subjected to hoop stresses. Interestingly, this behaviour matches the orthotropic elastic property of native aorta and hence proposes segmented hydroskeleton structures as promising design approach for future aortic repair devices.

Spatial accuracy of a rapid defense behavior in caterpillars

Aimed movements require that an animal accurately locates the target and correctly reaches that location. One such behavior is the defensive strike seen in Manduca sexta larva. These caterpillars respond to noxious mechanical stimuli applied to their abdomen with a strike of the mandibles towards the location of the stimulus. The accuracy with which the first strike movement reaches the stimulus site depends on the location of the stimulus. Reponses to dorsal stimuli are less accurate than those to ventral stimuli and the mandibles generally land ventral to the stimulus site. Responses to stimuli applied to anterior abdominal segments are less accurate than responses to stimuli applied to more posterior segments and the mandibles generally land posterior to the stimulus site. A trade-off between duration of the strike and radial accuracy is only seen in the anterior stimulus location (body segment A4). The lower accuracy of the responses to anterior and dorsal stimuli can be explained by the morphology of the animal; to reach these areas the caterpillar needs to move its body into a tight curve. Nevertheless, the accuracy is not exact in locations that the animal has shown it can reach, which suggests that consistently aiming more ventral and posterior of the stimulation site might be a defense strategy.

Mass and volume growth of larval insect tracheal system within a single instar

Organisms must accommodate oxygen delivery to developing tissues as body mass increases during growth. In insects, the growth of the respiratory system has been assumed to occur only when it molts, whereas body mass and volume increase during the larval stages between molts. This decouples whole body growth from the growth of the oxygen supply system. This assumption is derived from the observation that the insect respiratory system is an invagination of the exoskeleton, which must be shed during molts for continued growth to occur. Here, we provide evidence that this assumption is incorrect. We found that the respiratory system increases substantially in both mass and volume within the last larval instar of Manduca sexta larvae, and that the growth of the respiratory system changes with diet quality, potentially as a consequence of shifting metabolic demands.

Modeling of caterpillar crawl using novel tensegrity structures

Caterpillars are soft-bodied animals. They have a relatively simple nervous system, and yet are capable of exhibiting complex movement. This paper presents a 2D caterpillar simulation which mimics caterpillar locomotion using Assur tensegrity structures. Tensegrity structures are structures composed of a set of elements always under compression and a set of elements always under tension. Assur tensegrities are a novel sub-group of tensegrity structures. In the model, each caterpillar segment is represented by a 2D Assur tensegrity structure called a triad. The mechanical structure and the control scheme of the model are inspired by the biological caterpillar. The unique engineering properties of Assur tensegrity structures, together with the suggested control scheme, provide the model with a controllable degree of softness-each segment can be either soft or rigid. The model exhibits several characteristics which are analogous to those of the biological caterpillar. One such characteristic is that the internal pressure of the caterpillar is not a function of its size. During growth, body mass is increased 10 000-fold, while internal pressure remains constant. In the same way, the model is able to maintain near constant internal forces regardless of size. The research also suggests that caterpillars do not invest considerably more energy while crawling than while resting.

The diversity of hydrostatic skeletons

A remarkably diverse group of organisms rely on a hydrostatic skeleton for support, movement, muscular antagonism and the amplification of the force and displacement of muscle contraction. In hydrostatic skeletons, force is transmitted not through rigid skeletal elements but instead by internal pressure. Functioning of these systems depends on the fact that they are essentially constant in volume as they consist of relatively incompressible fluids and tissue. Contraction of muscle and the resulting decrease in one of the dimensions thus results in an increase in another dimension. By actively (with muscle) or passively (with connective tissue) controlling the various dimensions, a wide array of deformations, movements and changes in stiffness can be created. An amazing range of animals and animal structures rely on this form of skeletal support, including anemones and other polyps, the extremely diverse wormlike invertebrates, the tube feet of echinoderms, mammalian and turtle penises, the feet of burrowing bivalves and snails, and the legs of spiders. In addition, there are structures such as the arms and tentacles of cephalopods, the tongue of mammals and the trunk of the elephant that also rely on hydrostatic skeletal support but lack the fluid-filled cavities that characterize this skeletal type. Although we normally consider arthropods to rely on a rigid exoskeleton, a hydrostatic skeleton provides skeletal support immediately following molting and also during the larval stage for many insects. Thus, the majority of animals on earth rely on hydrostatic skeletons.

Compensatory mechanisms for ameliorating the fundamental trade-off between predator avoidance and foraging

Most organisms face the problem of foraging and maintaining growth while avoiding predators. Typical animal responses to predator exposure include reduced feeding, elevated metabolism, and altered development rate, all of which can be beneficial in the presence of predators but detrimental in their absence. How then do animals balance growth and predator avoidance? In a series of field and greenhouse experiments, we document that the tobacco hornworm caterpillar, Manduca sexta, reduced feeding by 30-40% owing to the risk of predation by stink bugs, but developed more rapidly and gained the same mass as unthreatened caterpillars. Assimilation efficiency, extraction of nitrogen from food, and percent body lipid content all increased during the initial phase (1-3 d) of predation risk, indicating that enhanced nutritional physiology allows caterpillars to compensate when threatened. However, we report physiological costs of predation risk, including altered body composition (decreased glycogen) and reductions in assimilation efficiency later in development. Our findings indicate that hornworm caterpillars use temporally dynamic compensatory mechanisms that ameliorate the trade-off between predator avoidance and growth in the short term, deferring costs to a period when they are less vulnerable to predation.

Attachment ability of sawfly larvae to smooth surfaces

Larvae of the sawfly Rhadinoceraea micans adhere properly to the anti-adhesive surface of their host plant Iris pseudacorus by using three pairs of thoracic legs, seven pairs of abdominal prolegs, and pygopodia, all provided with various smooth adhesive pads. Their attachment performance to smooth flat hydrophilic and hydrophobic glass and Plexiglas surfaces was studied in centrifugal force experiments. Obtained safety factors on Plexiglas were up to 25 in friction, and 8 in adhesion. Although larvae attached significantly stronger to the hydrophilic glass, they attached well also to the hydrophobic one. Pygopodia are suggested to dominate attachment force generation in the centrifugal force experiment. Transverse body position on the centrifuge drum was significantly advantageous for friction force generation than was longitudinal body position. Results are discussed in the context of the sawfly biology and provide a profound base for further detailed studies on biomechanics of sawfly larvae-plant interactions.