Cross-linking by protein oxidation in the rapidly setting gel-based glues of slugs

Analysis of the adhesive secreting cells of Arion subfuscus: insights into the role of microgels in a tough, fast-setting hydrogel glue

The slug Arion subfuscus produces a tough, highly adhesive defensive secretion. This secretion is a flexible hydrogel that is toughened by a double network mechanism. While synthetic double network gels typically require extensive time to prepare, this slug creates a tough gel in seconds. To gain insight into how the glue forms a double-network hydrogel so rapidly, the secretory apparatus of this slug was analyzed. The goal was to determine how the major components of the glue were distributed and mixed. Most of the glue comes from two types of large unicellular glands; one secretes polyanionic polysaccharides in small, membrane-bound packets, the other secretes proteins that appear to form a cross-linked network. The latter gland shows distinct regions where cross-linking appears to be occurring. These regions are darker, more homogeneous and appear more solid than the rest of the secretory material. The enzyme catalase is highly abundant in these regions, as are basic proteins. These results suggest that a rapid oxidation event occurs in this protein-containing gland, triggering cross-linking before the glue is released. The cross-linked microgels would then join together after secretion to form a granular hydrogel. The polysaccharide-filled packets would be mixed and interspersed among these microgels and may contribute to joining them together. This is an unexpected and highly effective way to form a tough gel rapidly.

Particle binding capacity of snail saliva

Gastropods forage with their radula, a thin chitinous membrane with embedded teeth, which scratch across the substrate to lose food particles. During this interaction, the risk of loosening particles is obvious without having a specialized mechanism holding them on the tooth surface. As mucus secretions are essential in molluscan life cycles and the locomotion and attachment gels are known to have an instant high adhesion, we have hypothesized that the saliva could support particle retention during feeding. As adhesion of snail saliva was not studied before, we present here an experimental setup to test its particle-binding capacity using a large land snail (Lissachatina fulica, Stylommatophora, Heterobranchia). This experiment was also applied to the gels produced by the snail foot for comparison and can be potentially applied to various fluids present at a small volume in the future. We found, that the saliva has high particle retention capacity that is comparable to the foot glue of the snail. To gain some insight into the properties of the saliva, we additionally studied it in the scanning electron microscope, estimated its viscosity in a de-wetting experiment, and investigated its elemental composition using energy dispersive X-ray spectroscopy reveling higher contents of Ca, Zn and other potential cross-linkers similar to those found in the glue.

Metal-binding proteins and cross-linking in the defensive glue of the slug Arion subfuscus

The role of metals in forming the primary cross-links in slug glue was investigated. Several metal-binding proteins were identified in the defensive glue produced by the slug Arion subfuscus. Notably, the C-lectins that are unique to the glue are iron-binding proteins. This is unusual for C-lectins. Dissociating these proteins from iron does not affect the glue's stiffness. Similarly, several proteins that can bind to zinc were identified, but dissociating the proteins from zinc did not weaken the glue. These results suggest that metal coordination is not involved in the primary cross-links of this hydrogel glue. The stable cross-links that provide stiffness are more likely to be created by a catalytic event involving protein oxidation. Cross-linking was unexpectedly difficult to prevent. Collecting the glue into a large volume of ice-cold buffer with reagents aimed at inhibiting oxidative cross-linking caused a slight loss of cross-linking, as demonstrated by the appearance of uncross-linked proteins in native gel electrophoresis. Notable among these was a protein that is normally heavily oxidized (asmp165). Nevertheless, this effect was not large, suggesting that the primary cross-links form before secretion.

Hollow protein microparticles formed through cross-linking by an Au3+ initiated redox reaction

Hollow microparticles (MPs) are of great relevance in the materials industry for a wide range of applications, such as catalysis, coatings, and delivery of theranostics. Here, we report the formation of hollow MPs through the assembly of lipoproteins in CaCO₃ templates. Proteins interact in the pores of CaCO₃ templates through attractive hydrophobic forces and form dense edges of hollow MPs. To further cross-link the proteins, Au³⁺ was added to initiate a redox reaction, where proteins were oxidized forming inter- and intramolecular covalent bonds, while Au³⁺ was reduced and gold nanoparticles (AuNPs) were formed. The obtained protein-based hollow MPs have a diameter of 6 μm and the AuNPs are embedded on their surface. Through this research, we suggest a new route to design biobased Au-protein hollow MPs in simple steps, which can allow new possibilities for carrying functional molecules and bioimaging.

Au3+-Induced gel network formation of proteins

The formation of protein gel networks in aqueous systems is a result of protein intermolecular interactions after an energy input, like heating. In this research, we report that a redox reaction between Au³⁺ ions and proteins can also lead to the formation of a protein gel network. Amino acids, like cysteine and tyrosine, get oxidized and form covalent bonds with neighboring protein molecules, while Au³⁺ ions get reduced to Au⁺ and Au⁰, nucleate and form gold nanoparticles. The protein gel network formation occurs within 2 h at room temperature and can be tuned by varying Au³⁺/protein ratio and accelerated by increasing the incubation temperature. The proposed Au³⁺-induced gel network formation was applied to different proteins, like egg yolk high-density lipoprotein, bovine serum albumin and whey protein. This research opens new insights for the investigation of the metal-protein interactions and may aid in the design of novel hybrid-soft nanocomposite materials.

Effect of Metals on Underwater Adhesion of Gastropod Adhesive Mucus

Many gastropods release mucus hydrogels, which help them to remain attached to different substrates. Although not as strong as synthetic or biomimetic adhesives, some of these hydrogels have the ability to adhere to wet surfaces. These complex hydrogels mainly consist of proteins and carbohydrates, their natural cross-linking reactions being dependent on the presence of metals. In this paper, we investigated the role of metals in improving the underwater adhesive property of the mucus hydrogel from the slug Laevicaulis alte. We found that the strength and duration of attachment of two glass surfaces under water by the mucus hydrogel could be enhanced by its simple treatment with salts of metals, namely, Ca, Mg, Cu, or Zn. The degree of enhancement followed the order Ca²⁺ < Mg²⁺ < Zn²⁺ < Cu²⁺. The Cu²⁺-treated hydrogel kept two glass surfaces attached under water for about 20 days, while Zn²⁺ treatment caused attachment for about 15 days, as compared to the 3-5 days of attachment caused by the untreated gel. Treatment with both metals increased the underwater stability of the hydrogel almost threefold, presumably by strengthening its cross-linking. However, the Cu²⁺-treated hydrogel fell short of its adhesive function in the case of fast attachment within time scale of minutes, showing considerably low adhesive strength. From this study, we conclude that the treatment with Zn²⁺ is the best choice for improvement of the underwater adhesive property in terms of strength and stability. Overall, this work presents a novel biological underwater adhesive. The dynamic behavior of this multicomponent hydrogel in a versatile metal-rich environment may guide us toward designing new useful biomimetics.

Strong, non-specific adhesion using C-lectin heterotrimers in a molluscan defensive secretion

The defensive mucus produced by the slug Arion subfuscus is tough and remarkably sticky. It spreads rapidly and adheres strongly to a wide range of surfaces. The adhesion is equally strong on wettable (glass) and non-wettable (plastic) surfaces. The adhesion appears to depend on a group of proteins that adsorb equally well to a wide range of different natural and artificial surfaces. Prominent among these proteins were those that distinguish the adhesive secretion from the non-adhesive mucus. The adhesive proteins were not washed off by non-ionic detergent, nor was the adhesion of the glue as a whole affected by this treatment. In contrast, high salt concentrations washed the most abundant adhesive proteins off the surfaces, and correspondingly weakened the glue's attachment. The most abundant of the adhesive proteins were C-lectins, which appear to form heterotrimers. These and other lectin-like proteins in slug glue have a high proportion of aromatic amino acids at conserved locations, and are relatively small and often basic. The aromatic and cationic side chains may provide a powerful combination promoting and maintaining surface adhesion.

Engineering Hydrogel Adhesion for Biomedical Applications via Chemical Design of the Junction

Hydrogel adhesion inherently relies on engineering the contact surface at soft and hydrated interfaces. Upon contact, adhesion normally occurs through the formation of chemical or physical interactions between the disparate surfaces. The ability to form these adhesion junctions is challenging for hydrogels as the interfaces are wet and deformable and often contain low densities of functional groups. In this Review, we link the design of the binding chemistries or adhesion junctions, whether covalent, dynamic covalent, supramolecular, or physical, to the emergent adhesive properties of soft and hydrated interfaces. Wet adhesion is useful for bonding to or between tissues and implants for a range of biomedical applications. We highlight several recent and emerging adhesive hydrogels for use in biomedicine in the context of efficient junction design. The main focus is on engineering hydrogel adhesion through molecular design of the junctions to tailor the adhesion strength, reversibility, stability, and response to environmental stimuli.

Dynamic cross-linking of an alginate-acrylamide tough hydrogel system: time-resolved in situ mapping of gel self-assembly

Hydrogels are a popular class of biomaterial that are used in a number of commercial applications (e.g.; contact lenses, drug delivery, and prophylactics). Alginate-based tough hydrogel systems, interpenetrated with acrylamide, reportedly form both ionic and covalent cross-links, giving rise to their remarkable mechanical properties. In this work, we explore the nature, onset and extent of such hybrid bonding interactions between the complementary networks in a model double-network alginate-acrylamide system, using a host of characterisation techniques (e.g.; FTIR, Raman, UV-vis, and fluorescence spectroscopies), in a time-resolved manner. Further, due to the similarity of bonding effects across many such complementary, interpenetrating hydrogel networks, the broad bonding interactions and mechanisms observed during gelation in this model system, are thought to be commonly replicated across alginate-based and broader double-network hydrogels, where both physical and chemical bonding effects are present. Analytical techniques followed real-time bond formation, environmental changes and re-organisational processes that occurred. Experiments broadly identified two phases of reaction; phase I where covalent interaction and physical entanglements predominate, and; phase II where ionic cross-linking effects are dominant. Contrary to past reports, ionic cross-linking occurred more favourably via mannuronate blocks of the alginate chain, initially. Evolution of such bonding interactions was also correlated with the developing tensile and compressive properties. These structure-property findings provide mechanistic insights and future synthetic intervention routes to manipulate the chemo-physico-mechanical properties of dynamically-forming tough hydrogel structures according to need (i.e.; durability, biocompatibility, adhesion, etc.), allowing expansion to a broader range of more physically and/or environmentally demanding biomaterials applications.

A novel two-component, expandable bioadhesive for exposed defect coverage: Applicability to prenatal procedures

BACKGROUND/PURPOSE

We sought to test select properties of a novel, expandable bioadhesive composite that allows for enhanced adhesion control in liquid environments.

METHODS

Rabbit fetuses (n = 23) underwent surgical creation of spina bifida on gestational day 22-25 (term 32-33 days). Defects were immediately covered with a two-component tough adhesive consisting of a hydrogel made of a double network of ionically crosslinked alginate and covalently crosslinked polyacrylamide linked to a bridging chitosan polymer adhesive. Animals were euthanized prior to term for different analyses, including hydraulic pressure testing.

RESULTS

Hydrogels remained adherent in 70% (16/23) of the recovered fetuses and in all of the last 14 fetuses as the procedure was optimized. Adherent hydrogels showed a median two-fold (IQR: 1.7-2.4) increase in area at euthanasia, with defect coverage confirmed by ultrasound and histology. The median maximum pressure to repair failure was 15 mmHg (IQR: 7.8-55.3), exceeding reported neonatal cerebrospinal fluid pressures.

CONCLUSIONS

This novel bioadhesive composite allows for selective, stable attachment of an alginate-polyacrylamide hydrogel to specific areas of the spina bifida defect in a fetal rabbit model, while the hydrogel expands with the defect over time. It could become a valuable alternative for the prenatal repair of spina bifida and possibly other congenital anomalies.

TYPE OF STUDY

N/A (animal and laboratory study).

LEVEL OF EVIDENCE

N/A (animal and laboratory study).

Identification of proteins in the adhesive trails of the diatom Amphora coffeaeformis

Throughout all kingdoms of life, a large number of adhesive biomolecules have evolved to allow organisms to adhere to surfaces underwater. Proteins play an important role in the adhesion of numerous marine invertebrates (e.g. mussels, sea stars, sea urchins) whereas much less is known about the biological adhesives from marine plants, including the diatoms. Diatoms are unicellular microalgae that together with bacteria dominate marine biofilms in sunlit habitats. In this study we present the first proteomics analyses of the diatom adhesive material isolated from the tenacious fouling species Amphora coffeaeformis. We identified 21 proteins, of which 13 are diatom-specific. Ten of these proteins share a conserved C-terminal domain, termed GDPH domain, which is widespread yet not ubiquitously present in all diatom classes. Immunofluorescence localization of a GDPH domain bearing protein (Ac629) as well as two other proteins identified in this study (Ac1442, Ac9617) demonstrated that these are components of the adhesive trails that are secreted by cells that glide on surfaces. This article is part of the theme issue 'Transdisciplinary approaches to the study of adhesion and adhesives in biological systems'.

Elasticity and energy dissipation in the double network hydrogel adhesive of the slug Arion subfuscus

The slug Arion subfuscus produces a mucus-based defensive secretion that is remarkably tough. This glue appears to be a double network hydrogel, gaining its toughness through the synergistic actions of two networks of polymers, a relatively stiff network and a relatively deformable network. The double network mechanism has great potential to guide the development of synthetic adhesives. Mechanical tests were performed to analyse key predictions of the mechanism. Stress relaxation tests and tensile tests support the presence of stable cross-links. Cyclic stress-strain tests demonstrate that the glue dissipates a great deal of energy through the failure of these cross-links as sacrificial bonds. Energy dissipation by failure of sacrificial bonds rather than viscous processes is supported by the minimal effect of the time course of the experiments on the measured properties. These sacrificial bonds appear able to reform within minutes after failure. Finally, the glue's stiffness decreases at pH values below 5.5, whereas magnesium and calcium rapidly dissociate from the glue at all pH values tested. Thus, these ions may not be the primary cross-linkers generating the glue's stiffness. This article is part of the theme issue 'Transdisciplinary approaches to the study of adhesion and adhesives in biological systems'.

RNA-Seq reveals a central role for lectin, C1q and von Willebrand factor A domains in the defensive glue of a terrestrial slug

The tough, hydrogel glue produced by the slug Arion subfuscus achieves impressive performance through metal-based, protein cross-links. The primary sequence of these proteins was determined through transcriptome sequencing and proteome analysis by tandem mass spectrometry. The main proteins that correlate with adhesive function are a group of 11 small, highly abundant lectin-like proteins. These proteins matched the ligand-binding C-lectin, C1q or H-lectin domains. The variety of different lectin-like proteins and their potential for oligomerization suggests that they function as versatile and potent cross-linkers. In addition, the glue contains five matrilin-like proteins that are rich in von Willebrand factor A (VWA) and EGF domains. Both C-lectins and VWA domains are known to bind to ligands using divalent cations. These findings are consistent with the double network mechanism proposed for slug glue, with divalent ions serving as sacrificial bonds to dissipate energy.

Spatial distribution of proteins in the quagga mussel adhesive apparatus

The invasive freshwater mollusc Dreissena bugensis (quagga mussel) sticks to underwater surfaces via a proteinacious 'anchor' (byssus), consisting of a series of threads linked to adhesive plaques. This adhesion results in the biofouling of crucial underwater industry infrastructure, yet little is known about the proteins responsible for the adhesion. Here the identification of byssal proteins extracted from freshly secreted byssal material is described. Several new byssal proteins were observed by gel electrophoresis. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry was used to characterize proteins in different regions of the byssus, particularly those localized to the adhesive interface. Byssal plaques and threads contain in common a range of low molecular weight proteins, while several proteins with higher mass were observed only in the plaque. At the adhesive interface, a plaque-specific ~8.1 kDa protein had a relative increase in signal intensity compared to the bulk of the plaque, suggesting it may play a direct role in adhesion.

Strong poly(ethylene oxide) based gel adhesives via oxime cross-linking

There is a demand for materials to replace or augment the use of sutures and staples in surgical procedures. Currently available commercial surgical adhesives provide either high bond strength with biological toxicity or polymer and protein-based products that are biologically acceptable (though with potential sensitizing potential) but have much reduced bond strength. It is desirable to provide novel biocompatible and biodegradable surgical adhesives/sealants capable of high strength with minimal immune or inflammatory response. In this work, we report the end group derivatization of 8-arm star PEOs with aldehyde and amine end groups. Gels were prepared employing the Schiff-base chemistry between the aldehydes and the amines. Gel setting times, swelling behavior and rheological characterization were carried out for these gels. The mechanical-viscoelastic properties were found to be directly proportional to the crosslinking density of the gels, the 10K PEO gel was stiffer in comparison to the 20K PEO gel. The adhesive properties of these gels were tested using porcine skin and showed excellent adhesion properties. Cytotoxicity studies were carried out for the individual gel components using two different methods: (a) Crystal Violet Staining assay (CVS assay) and (b) impedance and cell index measurement by the xCELLigence system at concentrations >5%. Gels prepared by mixing 20% w/w solutions were also tested for cytotoxicity. The results revealed that the individual gel components as well as the prepared gels and their leachables were non-cytotoxic at these concentrations.

STATEMENT OF SIGNIFICANCE

This work presents a new type of glue that is aimed at surgery applications using a water soluble star shaped polymer. It show excellent adhesion to skin and is tough and easy to use. We show that it is very biocompatible based on tests on live human cells, and could therefore in principle be used for internal surgery. Comparison with other reported and commercial glues shows that it is stronger than most, and does not swell in water to the same degree as many other water based bioadhesives.

Studies on the Adhesive Property of Snail Adhesive Mucus

Many gastropod molluscs are known to secrete mucus which allow these animals to adhere to a substrate while foraging over it. While the mucus is known to provide strong adhesion to both dry and wet surfaces, including both horizontal and vertical ones, no systematic study has been carried out to understand the strength of such adhesion under different conditions. We report here results from preliminary studies on adhesion characteristics of the mucus of a snail found in eastern India, Macrochlamys indica. When perturbed, the snail was found to secrete its adhesive mucus, which was collected and subjected to regular adhesion tests. The hydrated mucus was used as such, and also as mixed with buffer of different pH. These experiments suggest that the mucus was slightly alkaline, and showed the maximum adhesion strength of 9 kPa when present in an alkaline buffer. Preliminary studies indicate that adhesive force is related to the ability of the mucus to incorporate water. In alkaline condition, the gel like mass that it forms, incorporate water from a wet surface and enable strong adhesion.

Double-network gels and the toughness of terrestrial slug glue

The terrestrial slug Arion subfuscus produces a defensive secretion that is sticky and tough, despite being a dilute gel. It is unusual in having high stiffness for a gel, yet retaining the high extensibility typical of mucus. In tensile tests, it sustains an average peak stress of 101 kPa, and fails at an average strain of 9.5. This gives the gel toughness; it requires much greater strain energy to fracture than most gels. This toughness may arise from a double-network type mechanism. In this mechanism, two separate, interpenetrating networks of polymers with different properties combine to give toughness that can be several orders of magnitude greater than either network individually. Native gel electrophoresis suggests that A. subfuscus glue consists of two networks: a network of negatively charged proteins ranging in Mr from 40×10(3) to 220×10(3) that can be dissociated by hydroxylamine and a network of heparan sulfate-like proteoglycans. The two networks are not tightly linked, though proteins of Mr 40×10(3) and 165×10(3) may associate with the carbohydrates. Targeted disruption of either network separately, using enzymatic hydrolysis, disulfide bond breakage or imine bond disruption completely disrupted the glue, resulting in no measurable toughness. Thus, the two networks separately provide little toughness, but together they work synergistically to create a tough material, as predicted in the double-network mechanism.

The relative contribution of calcium, zinc and oxidation-based cross-links to the stiffness of Arion subfuscus glue

Metal ions are present in many different biological materials, and are capable of forming strong cross-links in aqueous environments. The relative contribution of different metal-based cross-links was measured in the defensive glue produced by the terrestrial slug Arion subfuscus. This glue contains calcium, magnesium, zinc, manganese, iron and copper. These metals are essential to the integrity of the glue and to gel stiffening. Removal of all metals caused at least a 15-fold decrease in the storage modulus of the glue. Selectively disrupting cross-links involving hard Lewis acids such as calcium reduced the stiffness of the glue, while disrupting cross-links involving borderline Lewis acids such as zinc did not. Calcium is the most common cation bound to the glue (40 mmol l(-1)), and its charge is balanced primarily by sulphate at 82-84 mmol l(-1). Thus these ions probably play a primary role in bringing polymers together directly. Imine bonds formed as a result of protein oxidation also contribute substantially to the stiffness of the glue. Disrupting these bonds with hydroxylamine caused a 33% decrease in storage modulus of the glue, while stabilizing them by reduction with sodium borohydride increased the storage modulus by 40%. Thus a combination of metal-based bonds operates in this glue. Most likely, cross-links directly involving calcium play a primary role in bringing together and stabilizing the polymer network, followed by imine bond formation and possible iron coordination.