One-step solvent-free synthesis of carbon dot-based layered composites exhibiting color-tunable photoluminescence

We here report a practical and green approach to the development of luminescent composites through in situ solvent-free formation of carbon dots on layered inorganic compounds. The composites exhibit higher solid-state photoluminescence than those prepared by mixing of synthesized carbon dots and layered clay minerals. Tuning of the emission color of the composites has also been achieved by the addition of small molecules into phloroglucinol as starting materials for carbonization. The carbon dots synthesized in clay compounds in the solvent-free conditions are well-dispersed to obtain homogeneous composites. Furthermore, we have demonstrated that highly luminescent carbon dots are formed by carbonization in the presence of layered inorganic compounds. The one-step solvent-free approach presented in this work may allow not only facile, economical, and sustainable production of nanostructured carbon dot-based composites but also improvement of their luminescence properties.

Importance of raw material features for the prediction of flux growth of Al2O3 crystals using machine learning

We evaluated the role of raw-material features for machine-learning prediction of the flux crystal growth of Al2O3 in MoO3 based on 185 types of growth trials.

Rosuvastatin cocrystals: an attempt to modulate physicochemical parameters

Background

The meager physicochemical properties like low solubility and low dissolution rate of rosuvastatin calcium remain as an obstruction for formulation development. In the present work, we explore the evolution of rosuvastatin cocrystal, which may offer the synergetic physico-chemical properties of the drug. Cocrystal crafting depends on two possible intermolecular interactions; heteromeric and the homomeric selection of compounds with complementary functional groups are contemplated as a possible cause of supramolecular synthons in cocrystal formation. Specifically, cocrystals of rosuvastatin with l-asparagine and l-glutamine with molar ratio (1:1) were fabricated by using slow solvent evaporation and slow evaporation techniques. Novel cocrystals of rosuvastatin-asparagine (RSC-C) and rosuvastatin-glutamine (RSC-G) cocrystals obtained by slow solvent evaporation were utilized for preliminary investigation and further scale-up was done by using the solvent evaporation technique.

Results

The novel cocrystals showed a new characteristic of powder X-ray diffraction, thermograms of differential scanning calorimetry, 1H liquid FT-NMR spectra, and scanning electron microscopy. These results signify the establishment of intermolecular interaction within the cocrystals. In both the novel cocrystals, rosuvastatin was determined to be engaged in the hydrogen bond interaction with the complementary functional groups of l-asparagine and l-glutamine. Compared with the pure rosuvastatin, RSC-C and RSC-G cocrystal showed 2.17-fold and 1.60-fold improved solubility respectively. The dissolution test showed that the RSC-C and RSC-G cocrystal exhibited 1.97-fold and 1.94-fold higher dissolution rate than the pure rosuvastatin in pH6.8 phosphate buffer respectively.

Conclusion

Modulation in the chemical environment, improvement in the solubility, and dissolution rate demonstrated the benefit of co-crystallization to improve the physicochemical properties of the drug.

Graphical abstract

Daidzein cocrystals: An opportunity to improve its biopharmaceutical parameters

The present study involves the contribution of cocrystallization towards the modification of the biopharmaceutical parameters of poorly watersoluble plant-originated isoflavone, daidzein (DAID). The cocrystals were prepared with GRAS status coformers i.e., isonicotinamide, theobromine and cytosine using mechanochemical grinding and characterized by various analytical techniques (DSC, FT-IR, PXRD and solid-state NMR). Crystal structures were obtained from PXRD data using BIOVIA Materials Studio software and compared in terms of supramolecular motifs. An additional qualitative and quantitative insight into interactions between both components of the cocrystal illustrated the presence of OH⋯N and OH⋯O=C heterosynthons and revealed a stabilizing role of hydrogen bonding. The cocrystals were further evaluated for their solubility, intrinsic dissolution and in vivo profile. Solubility and dissolution studies of pure daidzein and its cocrystals, namely daidzein-isonicotinamide (DIS), daidzein-cytosine (DCYT) and daidzein-theobromine (DTB) exhibited an almost 2-fold improvement. Evaluation of maximum concentration (Cmax) of cocrystals reveals that the DIS cocrystal shows the highest Cmax of 1848.7 ng/ml followed by DCYT cocrystal (1614.9 ng/ml) and DTB cocrystal (1326.0 ng/ml) in comparison to DAID which has a Cmax 870.5 ng/ml. Each of these cocrystals showed significant enhancement in in vivo and in vitro activities in comparison to daidzein. Thus, this report suggests cocrystallization as a viable approach to resolve the solubility and bioavailability issues that circumvent the use of a therapeutically potential isoflavone, daidzein.

Glass-transition-induced color-changing resins containing layered polydiacetylene

A phase-segregated composite of polystyrene (PSt) and layered polydiacetylene (PDA) was formed through simultaneous polymerization and crystallization. As the motion of PSt chains with glass transition is transferred to that of PDA, the color change was achieved by the shortening of the conjugation length with deformation of the layered structure.

Self-assembly as a key player for materials nanoarchitectonics

The development of science and technology of advanced materials using nanoscale units can be conducted by a novel concept involving combination of nanotechnology methodology with various research disciplines, especially supramolecular chemistry. The novel concept is called 'nanoarchitectonics' where self-assembly processes are crucial in many cases involving a wide range of component materials. This review of self-assembly processes re-examines recent progress in materials nanoarchitectonics. It is composed of three main sections: (1) the first short section describes typical examples of self-assembly research to outline the matters discussed in this review; (2) the second section summarizes self-assemblies at interfaces from general viewpoints; and (3) the final section is focused on self-assembly processes at interfaces. The examples presented demonstrate the strikingly wide range of possibilities and future potential of self-assembly processes and their important contribution to materials nanoarchitectonics. The research examples described in this review cover variously structured objects including molecular machines, molecular receptors, molecular pliers, molecular rotors, nanoparticles, nanosheets, nanotubes, nanowires, nanoflakes, nanocubes, nanodisks, nanoring, block copolymers, hyperbranched polymers, supramolecular polymers, supramolecular gels, liquid crystals, Langmuir monolayers, Langmuir-Blodgett films, self-assembled monolayers, thin films, layer-by-layer structures, breath figure motif structures, two-dimensional molecular patterns, fullerene crystals, metal-organic frameworks, coordination polymers, coordination capsules, porous carbon spheres, mesoporous materials, polynuclear catalysts, DNA origamis, transmembrane channels, peptide conjugates, and vesicles, as well as functional materials for sensing, surface-enhanced Raman spectroscopy, photovoltaics, charge transport, excitation energy transfer, light-harvesting, photocatalysts, field effect transistors, logic gates, organic semiconductors, thin-film-based devices, drug delivery, cell culture, supramolecular differentiation, molecular recognition, molecular tuning, and hand-operating (hand-operated) nanotechnology.

Kraft Mesh Origami for Efficient Oil-Water Separation

Inspired from fish scales that exhibit unique underwater superoleophobicity, artificial porous membranes featuring similar wettability have been successfully developed for oil-water separation. However, most of the superoleophobic meshes are workable only for underwater oil/water separation and become disabled in air. In this article, we reported the facile fabrication of underwater superoleophobic kraft mesh and demonstrated efficient oil-water separation using kraft mesh origamis. Kraft paper that features porosity, natural hydrophilicity, and relatively high elasticity and tear resistance has been found to be an ideal candidate for developing underwater superoleophobic origami. Direct laser drilling has been employed to make microhole arrays on the kraft paper, forming a flexible mesh. The hydrophilic nature and the hierarchical microstructures that consist of microhole arrays and porous microfiber networks make the resultant kraft mesh superoleophobic underwater, enabling oil-water separation. More importantly, the kraft mesh can retain a large amount of water (2.5 times its weight under dry conditions) owing to its porous and hydrophilic structure. Thus, the wet kraft mesh became a slippery surface for oil droplets when it was taken out of the water. This unique feature makes it possible to directly fish out oil droplets from water using a simple kraft mesh origami. Direct laser drilling of paper mesh for flexible origami may open up a new route to the rational design and fabrication of oil-water separation devices.

Self-Assembled Fullerene Crystals as Excellent Aromatic Vapor Sensors

Here we report the aromatic vapor sensing performance of bitter melon shaped nanoporous fullerene C₆₀ crystals that are self-assembled at a liquid-liquid interface between isopropyl alcohol and C₆₀ solution in dodecylbenzene at 25 °C. Average length and center diameter of the crystals were ca. 10 μm and ~2 μm, respectively. Powder X-ray diffraction pattern (pXRD) confirmed a face-centered cubic (fcc) structure with cell dimension ca. a = 1.4272 nm, and V = 2.907 nm³, which is similar to that of the pristine fullerene C₆₀. Transmission electron microscopy (TEM) confirmed the presence of a nanoporous structure. Quartz crystal microbalance (QCM) results showed that the bitter melon shaped nanoporous C₆₀ performs as an excellent sensing system, particularly for aromatic vapors, due to their easy diffusion through the porous architecture and strong π–π interactions with the sp²-carbon.

Bioinspired Environmentally Friendly Amorphous CaCO3-Based Transparent Composites Comprising Cellulose Nanofibers

Amorphous calcium carbonate (ACC) stabilized by acidic macromolecules is a useful material for the development of environmentally friendly composites. In this study, we synthesized transparent and mechanically tough ACC-based composite materials by the incorporation of water-dispersible cellulose derivatives, namely, carboxymethyl cellulose (CMC) and surface-modified crystalline cellulose nanofibers (CNFs). A solution mixing method used in the present work proved to be a powerful and efficient method for the production of mechanically tough and environmentally friendly materials. Molecular-scale interactions between carboxyl groups and Ca2+ ions induce homogeneous dispersion of CNFs in the composites, and this gives composite films with high transparency and high mechanical properties. The composite films of CMC, CNFs, and ACC at the mixture ratios of 40, 40, and 20 wt %, showed high mechanical properties of 15.8 ± 0.93 GPa for the Young's modulus and 268 ± 20 MPa for the tensile strength. These designed materials that are based on ACC may open up new opportunities in many fields in applications that require the use of environmentally friendly, biodegradable, mechanically tough, and transparent composite materials.

The Crystallization of Amorphous Calcium Carbonate is Kinetically Governed by Ion Impurities and Water

Many organisms use amorphous calcium carbonate (ACC) and control its stability by various additives and water; however, the underlying mechanisms are yet unclear. Here, the effect of water and inorganic additives commonly found in biology on the dynamics of the structure of ACC during crystallization and on the energetics of this process is studied. Total X-ray scattering and pair distribution function analysis show that the short- and medium-range order of all studied ACC samples are similar; however, the use of in situ methodologies allow the observation of small structural modifications that are otherwise easily overlooked. Isothermal calorimetric coupled with microgravimetric measurements show that the presence of Mg2+ and of PO43- in ACC retards the crystallization whereas increased water content accelerates the transformation. The enthalpy of ACC with respect to calcite appears, however, independent of the additive concentration but decreases with water content. Surprisingly, the enthalpic contribution of water is compensated for by an equal and opposite entropic term leading to a net independence of ACC thermodynamic stability on its hydration level. Together, these results point toward a kinetic stabilization effect of inorganic additives and water, and may contribute to the understanding of the biological control of mineral stability.

Nano Trek Beyond: Driving Nanocars/Molecular Machines at Interfaces

In 2016, the Nobel Prize in Chemistry was awarded for pioneering work on molecular machines. Half a year later, in Toulouse, the first molecular car race, a "nanocar race", was held by using the tip of a scanning tunneling microscope as an electrical remote control. In this Focus Review, we discuss the current state-of-the-art in research on molecular machines at interfaces. In the first section, we briefly explain the science behind the nanocar race, followed by a selection of recent examples of controlling molecules on surfaces. Finally, motion synchronization and the functions of molecular machines at liquid interfaces are discussed. This new concept of molecular tuning at interfaces is also introduced as a method for the continuous modification and optimization of molecular structure for target functions.

Nanoarchitectonics from Molecular Units to Living-Creature-Like Motifs

Important points for the fabrication of functional materials are the creation of nanoscale/molecular-scale units and architecting them into functional materials and systems. Recently, a new conceptual paradigm, nanoarchitectonics, has been proposed to combine nanotechnology and other methodologies including supramolecular chemistry, self-assembly and self-organization to satisfy major features of nanoscience and promote the creation of functional materials and systems. In this account article, our recent research results in materials development based on the nanoarchitectonics concept are summarized in two stories, (i) nanoarchitectonics from fullerenes as the simplest nano-units and (ii) dimension-dependent nanoarchitectonics from various structural units. The former demonstrates creativity of the nanoarchitectonics concept only with simple construction stuffs on materials fabrications, and a wide range of material applicability for the nanoarchitectonics strategy is realized in the latter ones.