A novel fluorescent probe with high sensitivity and selectivity for "On-Off-On" sensors for Cu2+ cations and CN- anions

A novel fluorescent probe NIPF was synthesized by the Suzuki reaction to recognize Cu2+ and CN-. With the addition of Cu2+, NIPF exhibited strong fluorescence quenching (90 % for NIPF) with a Ksv value of 3.4 × 106 M-1 and a detection limit of 9.04 × 10-10 M. Subsequently, CN- was added to the NIPF-Cu2+ solution, and [Cu(CN)x]n- was formed due to the strong interaction between Cu2+ and CN- leading to fluorescence recovery (89 % for NIPF-Cu2+). In addition, a detection limit of 3.6 × 10-8 M was obtained by fluorescence titration. Meanwhile, it was demonstrated that the sensor achieved 93 %-105 % recovery of Cu2+ in the tested environmental samples, and the practicability of Cu2+ and CN- detection were verified using hydrogels test, with significant color changes observed under 365 nm light. Accordingly, the fluorescent probe NIPF was used to recognize Cu2+ and CN- by the "on-off-on" sensors.

Single Organic Ligands Act as a Bifunctional Sensor for Subsequent Detection of Metal and Cyanide Ions, a Statistical Approach toward Coordination and Sensitivity

The detection of key ions in environmental samples has garnered significant attention in recent years in the pursuit of a cleaner environment for living organisms. Bifunctional and multifunctional sensors, as opposed to single-species sensors, have emerged as a rapidly developing field. Many reports in the literature have documented the use of bifunctional sensors for the subsequent detection of metal and cyanide ions. These sensors, consisting of simple organic ligands, form coordination compounds with transition metal ions, resulting in clear visible or fluorescent changes that facilitate detection. In some cases, a single polymeric material can act as a ligand and coordinate with metal ions, forming a complex that serves as a sensor for cyanide ion detection in biological and environmental samples through various mechanisms. Nitrogen is the most dominant coordinating site in these bifunctional sensors, with the sensitivity of the sensors being directly proportional to the denticities of ligands for metal ions, while for cyanide ions the sensitivity was found independent of the denticity of the ligands. This review covers the progress made in the field over the past fifteen years (2007-2022), with most ligands detecting copper (II) and cyanide ions, but with the capability to detect other metals such as iron, mercury, and cobalt as well.

Voltammetric Determination of Hg2+, Zn2+, and Pb2+ Ions Using a PEDOT/NTA-Modified Electrode

A novel electrochemical sensor for determining trace levels of Hg²⁺, Pb²⁺, and Zn²⁺ ions in water using square wave voltammetry (SWV) is reported. The sensor is based on a platinum electrode (Pt) modified by poly(3,4-ethylenedioxythiophene) and N _α,N _α-bis-(carboxymethyl)-l-lysine hydrate (NTA lysine) PEDOT/NTA. The modified electrode surface (PEDOT/NTA) was prepared via the introduction of the lysine-NTA group to a PEDOT/N-hydroxyphthalimide NHP electrode. The (PEDOT/NTA) was characterized via cyclic voltammetry (CV), Fourier transform infrared (FTIR) spectroscopy, and scanning electron microscopy (SEM). The effects of scan rates on the electrochemical properties of the polymer electrode were also investigated. The electrochemical results were used to estimate the coverage of the electrode polymer surface and its electrostability in background electrolyte solutions. Several analytical parameters, such as polymer film thickness, metal deposition time, and pH of the electrolyte, were examined. Linear responses to Hg²⁺, Pb²⁺, and Zn²⁺ ions in the concentration range of 5-100 μg L^-1 were obtained. The limits of detection (LODs) for the determination of Hg²⁺, Pb²⁺, and Zn²⁺ ions were 1.73, 2.33, and 1.99 μg L^-1, respectively. These promising results revealed that modified PEDOT/NTA films might well represent an important addition to existing electrochemical sensor technologies.

Targeted Bioimaging of Cancer Cells Using Free Folic Acid-Sensitive Molybdenum Disulfide Quantum Dots through Fluorescence "Turn-Off"

In the present study, a proficient way for targeted bioimaging of folate receptor (FR)-positive cancer cells using free folic acid (FA)- and MoS₂ QD-based nanoprobes is discussed along with its advantages over the preparation of orthodox direct FA-nanoprobe bioconjugates for the imaging. The water-soluble MoS₂ QDs of size 4-5 nm with cysteine functionalization are synthesized by a simplistic bottom-up hydrothermal method. The as-prepared MoS₂ QDs exhibit the blue emission with the highest emission intensity at 444 nm upon excitation of 370 nm. The MoS₂ QDs are too sensitive toward FA to produce an effective and stable nanofiber structure through supramolecular interaction, which demonstrates ∼97% quenching of fluorescence. Moreover, the high selectivity and sensitivity of MoS₂ QDs toward FA make the MoS₂ QD-based nanoprobe an appropriate candidate for FA-targeted "turn-off" imaging probes for in vivo study of FA-pretreated FR-overexpressed cancer cells. It is obvious from the confocal microscopy images that the FA-pretreated B16F10 cancer cells show higher population of dimmed fluorescence compared to untreated cancer cells and HEK-293 normal cells. The flow cytometry study quantitatively reveals the significant difference of the geometric mean of fluorescence between FA-pretreated and untreated B16F10 cancer cells. Hence, these MoS₂ QD-based nanoprobes can be applied as potential nanoprobes for the prediagnosis of cancer through targeted bioimaging.

Ultra-trace level detection of Cu2+ in an aqueous medium by novel Zn(ii)-dicarboxylato–pyridyl coordination polymers and cell imaging with HepG2 cells

Fluorescent 1D Zn(ii) coordination polymers are aggregated via noncovalent interactions. The emission of the CPs is exclusively quenched by Cu²⁺ and the LOD is at μM range. In aqueous medium internalization CPs within HepG2 cells is detected by microscopic cell image using Cu²⁺.

A coumarin-indole based colorimetric and "turn on" fluorescent probe for cyanide

A novel coumarin-indole based chemodosimeter with a simple structure was designed and prepared via a condensation reaction in high yield. The probe exhibited very high selectivity towards cyanide on both fluorescence and UV-vis spectra, which allowed it to quantitatively detect and imaging cyanide ions in organic-aqueous solution by either fluorescence enhancement or colorimetric changes. Confirmed by (1)H NMR and HRMS spectra, the detection mechanism was proved to be related with the Michael addition reaction induced by cyanide ions, which blocked the intramolecular charge transfer (ICT) of the probe. Moreover, the probe was able to be utilized efficiently in a wide pH range (7.5-10) with negligible interference from other anions and a low detection limit of 0.51μM. Application in 5 kinds of natural water source and accurate detection of cyanide in tap water solvent system also indicated the high practical significance of the probe.

Complexation of amyloid fibrils with charged conjugated polymers

It has been suggested that conjugated charged polymers are amyloid imaging agents and promising therapeutic candidates for neurological disorders. However, very less is known about their efficacy in modulating the amyloid aggregation pathway. Here, we studied the modulation of Parkinson's disease associated α-synuclein (AS) amyloid assembly kinetics using conjugated polyfluorene polymers (PF, cationic; PFS, anionic). We also explored the complexation of these charged polymers with the various AS aggregated species including amyloid fibrils and oligomers using multidisciplinary biophysical techniques. Our data suggests that both polymers irrespective of their different charges in the side chains increase the fibrilization kinetics of AS and also remarkably change the morphology of the resultant amyloid fibrils. Both polymers were incorporated/aligned onto the AS amyloid fibrils as evident from electron microscopy (EM) and atomic force microscopy (AFM), and the resultant complexes were structurally distinct from their pristine form of both polymers and AS supported by FTIR study. Additionally, we observed that the mechanism of interactions between the polymers with different species of AS aggregates were markedly different.

A polyfluorene based zwitterionic fluorescent probe for response towards biological species in aqueous media

Water soluble, boronic acid bearing polyfluorene has been synthesized for the detection of diol containing biomolecules through effective fluorescence ‘turn off’ at pH 7.4.