The Recent Advances in Iron-Catalyzed C(sp3 )-H Functionalization

The use of iron as a core metal in catalysis has become a research topic of interest over the last few decades. The reasons are clear. Iron is the most abundant transition metal on Earth's crust and it is widely distributed across the world. It has been extracted and processed since the dawn of civilization. All these features render iron a noncontaminant, biocompatible, nontoxic, and inexpensive metal and therefore it constitutes the perfect candidate to replace noble metals (rhodium, palladium, platinum, iridium, etc.). Moreover, direct C-H functionalization is one of the most efficient strategies by which to introduce new functional groups into small organic molecules. The majority of organic compounds contain C(sp3 )-H bonds. Given the enormous importance of organic molecules in so many aspects of existence, the utilization and bioactivity of C(sp3 )-H bonds are of the utmost importance. This review sheds light on the substrate scope, selectivity, benefits, and limitations of iron catalysts for direct C(sp3 )-H bond activations. An overview of the use of iron catalysis in C(sp3 )-H activation protocols is summarized herein up to 2022.

Asymmetric addition of an N-methyl C(sp3)-H bond to cyclic alkenes enabled by an iridium/phosphine-olefin catalyst

Iridium-catalyzed asymmetric C-H addition of an N-methyl group on 3-trifluoromethyl-2-(N-methylamino)pyridine to cyclic alkenes was realized by using a phosphine-olefin ligand. Indene and its 7-substituted derivatives, acenaphthylene, and some bicyclic alkenes underwent the addition to give the corresponding products in good yields with high enantioselectivity.

Transition-metal-catalyzed C-H bond alkylation using olefins: recent advances and mechanistic aspects

Transition metal catalysis has contributed immensely to C-C bond formation reactions over the last few decades, and alkylation is no exception. The superiority of such methodologies over traditional alkylation is evident from minimal reaction steps, shorter reaction times, and atom economy while also allowing control over regio- and stereo-selectivity. In particular, hydrocarbonation of alkenes has grabbed increased attention due its fundamental ability to effectively and selectively synthesise a wide range of industrially and pharmaceutically relevant moieties. This review attempts to provide a scientific viewpoint and a systematic analysis of the recent developments in transition-metal-catalyzed alkylation of various C-H bonds using simple and activated olefins. The key features and mechanistic studies involved in these transformations are described briefly.

Late-stage ortho-C-H alkenylation of 2-arylindazoles in aqueous medium by Manganese(i)-catalysis

Earth-abundant and water-tolerant manganese(i) catalyzed alkenylation of 2-arylindazole with alkyl and aryl alkynes through C–H bond activation is described with a unique level of E-selectivity. The reaction proceeds through the control of C3 nucleophilicity of 2-aryl indazoles. This method is applied to the late-stage functionalization of complex molecules including ethinylestradiol, norethisterone, and N-protected amino acid derivatives. The kinetic isotope studies suggest that the C–H bond activation step may not be the rate-determining step.

Earth-abundant and water-tolerant manganese(i) catalyzed alkenylation of 2-arylindazole with alkyl and aryl alkynes through C–H bond activation is described with a unique level of E-selectivity.

Ir-Catalyzed cyclization of α,ω-dienes with an N-methyl group via two C-H activation steps

Iridium-catalyzed sp³ C-H alkylation of an N-methyl group with 1,5- and 1,6-dienes proceeded to give five- and six-membered carbocyclic compounds, respectively, in high yields. The reaction involves intermolecular alkylation of the N-methyl group with a vinyl moiety and subsequent intramolecular cyclization at the β-position of the initially formed alkylated intermediate. The reaction using a chiral bidentate phosphine ligand enabled the asymmetric synthesis of the cyclic compounds.

Iridium-catalyzed enantioselective addition of an N-methyl C-H bond to α-trifluoromethylstyrenes via C-H activation

The Ir-catalyzed enantioselective addition of an N-methyl C-H bond of 2-(methylamino)pyridine derivatives to α-trifluoromethylstyrenes proceeded via C-H activation to give chiral γ-branched amine derivatives having a trifluoromethyl-substituted stereocenter. It was found that a bulky and electron-withdrawing group at the 3-position of 2-(methylamino)pyridines was necessary for the present C-H addition reaction catalyzed by a cationic iridium/chiral bisphosphine complex.

Photocatalytic Hydroaminoalkylation of Styrenes with Unprotected Primary Alkylamines

Catalytic, intermolecular hydroaminoalkylation (HAA) of styrenes provides a powerful disconnection for pharmacologically relevant γ-arylamines, but current methods cannot utilize unprotected primary alkylamines as feedstocks. Metal-catalyzed HAA protocols are also highly sensitive to α-substitution on the amine partner, and no catalytic solutions exist for α-tertiary γ-arylamine synthesis via this approach. We report a solution to these problems using organophotoredox catalysis, enabling a direct, modular, and sustainable preparation of α-(di)substituted γ-arylamines, including challenging electron-neutral and moderately electron-rich aryl groups. A broad range of functionalities are tolerated, and the reactions can be run on multigram scale in continuous flow. The method is applied to a concise, protecting-group-free synthesis of the blockbuster drug Fingolimod, as well as a phosphonate mimic of its in vivo active form (by iterative α-C-H functionalization of ethanolamine). The reaction can also be sequenced with an intramolecular N-arylation to provide a general and modular access to valuable (spirocyclic) 1,2,3,4-tetrahydroquinolines and 1,2,3,4-tetrahydronaphthyridines. Mechanistic and kinetic studies support an irreversible hydrogen atom transfer activation of the alkylamine by the azidyl radical and some contribution from a radical chain. The reaction is photon-limited and exhibits a zero-order dependence on amine, azide, and photocatalyst, with a first-order dependence on styrene.

From Hydrogenation to Transfer Hydrogenation to Hydrogen Auto-Transfer in Enantioselective Metal-Catalyzed Carbonyl Reductive Coupling: Past, Present, and Future

Atom-efficient processes that occur via addition, redistribution or removal of hydrogen underlie many large volume industrial processes and pervade all segments of chemical industry. Although carbonyl addition is one of the oldest and most broadly utilized methods for C-C bond formation, the delivery of non-stabilized carbanions to carbonyl compounds has relied on premetalated reagents or metallic/organometallic reductants, which pose issues of safety and challenges vis-à-vis large volume implementation. Catalytic carbonyl reductive couplings promoted via hydrogenation, transfer hydrogenation and hydrogen auto-transfer allow abundant unsaturated hydrocarbons to serve as substitutes to organometallic reagents, enabling C-C bond formation in the absence of stoichiometric metals. This perspective (a) highlights past milestones in catalytic hydrogenation, hydrogen transfer and hydrogen auto-transfer, (b) summarizes current methods for catalytic enantioselective carbonyl reductive couplings, and (c) describes future opportunities based on the patterns of reactivity that animate transformations of this type.

Ru(II)-Catalyzed Switchable C-H Alkylation and Spirocyclization of 2-Arylquinoxalines with Maleimides via ortho-C-H Activation

A Ru(II)-catalyzed facile and controllable protocol for C-H alkylation and spirocyclization of 2-arylquinoxalines with maleimides has been achieved under ambient air in high yields. Sequential ortho-C-H activation and C-annulation results in the formation of diverse polyheterocycles containing spiro[indeno[1,2-b]quinoxaline-11,3'-pyrrolidine]-2',5'-diones, which are of potent interest in medicinal chemistry. Mechanistic investigations suggest a reversible cleavage of the ortho-C-H bond in the turnover-limiting step.

Iridium(I)-Catalyzed α-C(sp3)-H Alkylation of Saturated Azacycles

Saturated azacycles are commonly encountered in bioactive compounds and approved therapeutic agents. The development of methods for functionalization of the α-methylene C-H bonds of these highly privileged building blocks is of great importance, especially in drug discovery. While much effort has been dedicated toward this goal by using a directed C-H activation approach, the development of directing groups that are both general as well as practical remains a significant challenge. Herein, the design and development of novel amidoxime directing groups is described for Ir(I)-catalyzed α-C(sp³)-H alkylation of saturated azacycles using readily available olefins as coupling partners. This protocol extends the scope of saturated azacycles to piperidines, azepane, and tetrahydroisoquinoline that are incompatible with our previously reported directing group. A variety of olefin coupling partners, including previously unreactive disubstituted terminal olefins and internal olefins, are compatible with this transformation. The selectivity for a branched α-C(sp³)-alkylation product is also observed for the first time when acrylate is used as the reaction partner. The development of practical, one-step installation and removal protocols further adds to the utility of amidoxime directing groups.