Mechanoactivated amorphization and photopolymerization of styryldipyryliums

Conventional topochemical photopolymerization reactions occur exclusively in precisely-engineered photoactive crystalline states, which often produces high-insoluble polymers. To mitigate this, here, we report the mechanoactivation of photostable styryldipyrylium-based monomers, which results in their amorphization-enabled solid-state photopolymerization and produces soluble and processable amorphous polymers. A combination of solid-state nuclear magnetic resonance, X-ray diffraction, and absorption/fluorescence spectroscopy reveals the crucial role of a mechanically-disordered monomer phase in yielding polymers via photo-induced [2 + 2] cycloaddition reaction. Hence, mechanoactivation and amorphization can expand the scope of topochemical polymerization conditions to open up opportunities for generating polymers that are otherwise difficult to synthesize and analyze.

The Photosalient Effect and Thermochromic Luminescence Based on o-Carborane-Assisted π-Stacking in the Crystalline State

Herein, we report the unique multiple-stimuli responsiveness of anthracene-tethered o-carborane derivatives. We designed and synthesized anthracene derivatives with different substitution positions and numbers of the o-carborane units. Two compounds had characteristic crystal structures involving the columnar π-stacking structures of the anthracene units. From the analysis of crystalline-state structure-property relationships, it was revealed that the crystals exhibited the photosalient effect accompanied by photochemical [4+4] cycloaddition reactions and temperature-dependent photophysical dual-emission properties including excimer emission of anthracene. Those properties were considered as non-radiative and radiative deactivation pathways through the excimer formation in the excited state and the formation of excimer species was facilitated by the π-stacking structure of anthracene units. Moreover, we found unusual temperature dependency on the occurrence of the photosalient effect. According to the data from variable temperature X-ray crystallography, a strong correlation between lattice shrinkage and strain accumulation is suggested.

A Living Topochemical Ring-Opening Polymerization of Achiral Amino Acid N-Carboxy-Anhydrides in Single Crystals

A living topochemical ring-opening polymerization (ROP) of achiral amino-acid N-carboxyanhydrides (NCAs) is reported. Single crystals of the NCAs of α-aminoisobutyric acid (Aib) and 1-aminocyclohexanecarboxylic acid (ACHC) were grown, allowing a ring-opening polymerization macroscopically induced by amines. The single crystals could be polymerized at temperatures from 25-50 °C after physically contacting the amine-based initiator with the crystals. Topochemical polymerization of the crystals was proven by MALDI-ToF MS and XRD, generating polymers with chain lengths of up to 40 units and a complete affixation of the initiating amine at the polymer's head. Due to the proper alignment of the reacting groups in the crystal, longer polymer chains with improved purities can be reached, as chain-transfer is reduced as compared to solution polymerization. Simple purification of the polymers can be achieved by separation of the unreacted NCA via dispersion in acetonitrile. Overall, this method enables the preparation of polymers with higher chain length and purities at mild conditions, finally demonstrating a crystal-based ring opening polymerization.

Single-crystal polymers (SCPs): from 1D to 3D architectures

Single-crystal polymers (SCPs) with unambiguous chemical structures at atomic-level resolutions have attracted great attention. Obtaining precise structural information of these materials is critical as it enables a deeper understanding of the potential driving forces for specific packing and long-range order, secondary interactions, and kinetic and thermodynamic factors. Such information can ultimately lead to success in controlling the synthesis or engineering of their crystal structures for targeted applications, which could have far-reaching impact. Successful synthesis of SCPs with atomic level control of the structures, especially for those with 2D and 3D architectures, is rare. In this review, we summarize the recent progress in the synthesis of SCPs, including 1D, 2D, and 3D architectures. Solution synthesis, topochemical synthesis, and extreme condition synthesis are summarized and compared. Around 70 examples of SCPs with unambiguous structure information are presented, and their synthesis methods and structural analysis are discussed. This review offers critical insights into the structure-property relationships, providing guidance for the future rational design and bottom-up synthesis of a variety of highly ordered polymers with unprecedented functions and properties.

Mixed noble metal-oxo clusters: platinum(IV)-gold(III) oxoanion [PtIV2AuIII3O6((CH3)2AsO2)6]. Chem Commun (Camb) 2023;59:5918-5921. [PMID: 37171021 DOI: 10.1039/d3cc00243h]

The first discrete mixed platinum(IV)-gold(III) oxoanion [Pt^IV₂Au^III₃O₆((CH₃)₂AsO₂)₆]^- (1) was synthesized by reaction of H₂Pt(OH)₆ with H[AuCl₄] in a simple one-pot procedure in aqueous solution at pH 7 and comprises two equivalent Pt^IVO₆(As(CH₃)₂)₃ units which are linked by three square-planar Au^IIIO₄ units. Polyanion 1 could be isolated as a potassium or sodium salt in good yield, which were structurally characterized in the solid state by single-crystal XRD and TGA, and in solution by multinuclear (¹H, ¹³C, ¹⁹⁵Pt) NMR, indicating that polyanion 1 is stable in solution, which was confirmed by ESI-MS studies. The sodium salt of 1 undergoes a clean single-crystal-to-single-crystal (SCSC) structural transformation upon rehydration and dehydration.

Reversible First-Order Single Crystal to Single Crystal Thermal Phase Transition in [(CH3)3CNH3]4[V4O12]

The well-known compound tetrakis(tert-butylammonium)-cyclo-tetrametavanadate (V), [(CH₃)₃CNH₃]₄[V₄O₁₂] (1h_RT), which crystallizes in the tetragonal I4/m space group, undergoes an irreversible solid state transformation upon heating, constituting one of the few examples in which the initial and the final stages are structurally characterized by sc-XRD. Now, we observed the ability of the same compound to undergo an additional single-crystal-to-single-crystal (SCSC) transformation upon thermal stimuli, but this time at low temperatures (153 K). Compound 1h_RT contains a discrete unprotonated [V₄O₁₂]^4- tetrahedral anion in which V and O bridging atoms are coplanar. In both phases, these tetrameric anions are linked through tert-butylammonium cations in an extensive network of hydrogen bonds, but at low temperatures, this phase loses its characteristic O-V-O coplanarity, with the resulting rearrangement of the crystal packing and hydrogen-bond network which provide its reversibility at low temperatures. Again, the initial and final stages have been characterized structurally by sc-XRD.

Structural Phase Transitions in Anthracene Crystals

Anthracene (C14 H10 ) and its derivatives, π-conjugated molecules in acenes, have been widely researched in terms of their reactions, physical properties, and self-assembly (or crystal engineering). These molecules can be functionalized to tune reactivities, optoelectronic properties, and self-assembling abilities. Structural changes in the molecular assemblies, solid states, and crystals have recently been discovered. Therefore, a systematic discussion of anthracene's molecular structure, packing, and optical properties based on its intermolecular structure and phase transitions is important for future chemical and structural design. In the present review, we discuss anthracene's molecular design, dimer packing, and crystal structure, focusing on the structural phase transitions of its crystals. We also provide examples of the phase transitions of anthracene crystals. Changes to edge-to-face of CH-π interaction and face-to-face packing of π-π interaction affect the thermodynamic stabilities of various crystal structures. These structures can inform the prediction of structural and physical properties.

Crystal Structures of Lignocellulosic Furfuryl Biobased Polydiacetylenes with Hydrogen-Bond Networks: Influencing the Direction of Solid-State Polymerization through Modification of the Spacer Length

We present the topochemical polymerization of two lignocellulosic biobased diacetylenes (DAs) that only differ by an alkyl spacer length of 1 methylene (n = 1) or 3 methylene units (n = 3) between the diyne and carbamate functionalities. Their crystalline molecular organizations have the distinctive feature of being suitable for polymerization in two potential directions, either parallel or skewed to the hydrogen-bonded (HB) network. However, single-crystal structures of the final polydiacetylenes (PDAs) demonstrate that the resulting orientation of the conjugated backbones is different for these two derivatives, which lead to HB supramolecular polymer networks (2D nanosheets) for n = 1 and to independent linear PDA chains with intramolecular HBs for n = 3. Thus, spacer length modification can be considered a new strategy to influence the molecular orientation of conjugated polymer chains, which is crucial for developing the next generation of materials with optimal mechanical and optoelectronic properties. Calculations were performed on model oligodiacetylenes to evaluate the cooperativity effect of HBs in the different crystalline supramolecular packing motifs and the energy profile related to the torsion of the conjugated backbone of a PDA chain (i.e., its ability to adopt planar or helical conformations).

Visualizing a SCSC [2 + 2] photodimerization through its lattice dynamics: an experimental and theoretical investigation

In homogeneous solid‐state reactions, the single‐crystal nature of the starting material remains unchanged, and the system evolves seamlessly through a series of solid solutions of reactant and product. Among [2+2] photodimerizations of cinnamic acid derivatives in the solid state, those involving salts of the 4‐aminocinnamic acid have been recognized to proceed homogeneously in a “single‐crystal‐to‐single‐crystal” fashion by X‐ray diffraction techniques. Here the bromide salt of this compound class is taken as a model system in a Raman spectroscopy study at low wavelengths, to understand how such a mechanism defines the trend of the crystal lattice vibrations during the reaction. Vibrational mode calculations, based on dispersion corrected DFT simulations of the crystal lattices involved in the transformation, have assisted the interpretation of the experiments. Such an approach has allowed us to clarify the spectral signatures and to establish a correlation between the dynamics of the monomer and dimer systems in a process where chemical progress and crystal structural changes are demonstrated to occur simultaneously.