A Ni0(cod)(dq) (COD: 1,5-cycloctadiene; DQ: duroquinone) complex as a catalyst precursor for oligothiophene and polythiophene synthesis

Nickel-catalyzed syntheses of oligothiophene and polythiophene were carried out with Ni(cod)(dq) (COD: 1,5-cycloctadiene; DQ: duroquinone) as a catalyst precursor. Studies on the ligand exchange of Ni(cod)(dq) revealed that a high temperature was necessary to replace COD and DQ with PPh3 and N-heterocyclic carbene IPr. A coupling reaction of a metalated 3-hexylthiophene with 2-chloro-3-hexylthiophene employing Ni(cod)(dq) with IPr proceeded with a remarkably reduced amount of homocoupling byproduct. Polymerization of 2-chloro-3-hexylthiophene with Ni(cod)(dq)/DPPP also resulted in the reduction of the regioregularity defect.

Real-time correlation of crystallization and segmental order in conjugated polymers

Modulating the segmental order in the morphology of conjugated polymers is widely recognized as a crucial factor for achieving optimal electronic properties and mechanical deformability. However, it is worth noting that the segmental order is typically associated with the crystallization process, which can result in rigid and brittle long-range ordered crystalline domains. To precisely control the morphology, a comprehensive understanding of how highly anisotropic conjugated polymers form segmentally ordered structures with ongoing crystallization is essential, yet currently elusive. To fill this knowledge gap, we developed a novel approach with a combination of stage-type fast scanning calorimetry and micro-Raman spectroscopy to capture the series of specimens with a continuum in the polymer percent crystallinity and detect the segmental order in real-time. Through the investigation of conjugated polymers with different backbones and side-chain structures, we observed a generally existing phenomenon that the degree of segmental order saturates before the maximum crystallinity is achieved. This disparity allows the conjugated polymers to achieve good charge carrier mobility while retaining good segmental dynamic mobility through the tailored treatment. Moreover, the crystallization temperature to obtain optimal segmental order can be predicted based on Tg and Tm of conjugated polymers. This in-depth characterization study provides fundamental insights into the evolution of segmental order during crystallization, which can aid in designing and controlling the optoelectronic and mechanical properties of conjugated polymers.

Group 16 conjugated polymers based on furan, thiophene, selenophene, and tellurophene

Five-membered aromatic rings containing Group 16 elements (O, S, Se, and Te), also referred as chalcogenophenes, are ubiquitous building blocks for π-conjugated polymers (CPs). Among these, polythiophenes have been established as a model system to study the interplay between molecular structure, solid-state organization, and electronic performance. The judicious substitution of alternative heteroatoms into polythiophenes is a promising strategy for tuning their properties and improving the performance of derived organic electronic devices, thus leading to the recent abundance of CPs containing furan, selenophene, and tellurophene. In this review, we first discuss the current status of Kumada, Negishi, Murahashi, Suzuki-Miyaura, and direct arylation polymerizations, representing the best routes to access well-defined chalcogenophene-containing homopolymers and copolymers. The self-assembly, optical, solid-state, and electronic properties of these polymers and their influence on device performance are then summarized. In addition, we highlight post-polymerization modifications as effective methods to transform polychalcogenophene backbones or side chains in ways that are unobtainable by direct polymerization. Finally, the major challenges and future outlook in this field are presented.

Mechanical properties and structures under the deformation of thiophene copolymers with cyclic siloxane units

The control of cross-linking of polythiophene with cyclic siloxane was achieved and provided to their mechanical properties and elastic recovery. The cross-links led to high recovery of crystallite orientation under stretching.

Chiral Polythiophenes: Part I: Syntheses of Monomeric Precursors

The purpose of this mini-review is to comprehensively present the synthetic approaches used for the preparation of non-racemic mono- and multi-substituted thiophenes, which, in turn, can be applied as precursors for the synthesis of chiral polythiophenes isolated as a single chemical entity or having supramolecular thin-layer architectures.

Dehalogenative or Deprotonative? The Preparation Pathway to the Organometallic Monomer for Transition-Metal-Catalyzed Catalyst-Transfer-Type Polymerization of Thiophene Derivatives

Due to a wide range of applications in electronic materials, polythiophenes attract considerable attention in organic and polymer syntheses as well as in materials science. For the purpose of developing the practical synthetic protocol, this review focuses on the deprotonative pathway in the preparation of thiophene organometallic monomer, which was shown to be effective employing 2-halo-3-substituted thiophene as a monomer precursor. The thus metallated thiophene monomer was shown to undergo polymerization by nickel(II) complex catalysis, with which highly regioregular head-to-tail (HT)-type polythiophenes were obtained with controlled molecular weight and molecular weight distribution. Several polythiophene derivatives with modified thiophene-ring and side-chain structures were shown to be designed in order to achieve the designed functionality as materials.

Formal preparation of regioregular and alternating thiophene-thiophene copolymers bearing different substituents

Differently substituted thiophene–thiophene-alternating copolymers were formally synthesized employing a halo-bithiophene as a monomer. Nickel-catalyzed polymerization of bithiophene with substituents at the 3-position, including alkyl-, fluoroalkyl-, or oligosiloxane-containing groups, afforded the corresponding copolymers in good to excellent yield. The solubility test in organic solvents was performed to reveal that several copolymers showed a superior solubility. X-ray diffraction analysis of the thin film of the alternating copolymers composed of methyl and branched oligosiloxane substituents was also performed, and the results suggested the formation of a dual-layered film structure.

Recent developments in the synthesis of regioregular thiophene-based conjugated polymers for electronic and optoelectronic applications using nickel and palladium-based catalytic systems

Thiophene-based conjugated polymers are important conjugated polymers due to their exceptional optical and conductive properties, over the past few decades many researchers have designed novel strategies to reach more efficient materials for electronic applications.

The effect of side-chain branch position on the thermal properties of poly(3-alkylthiophenes)

Branching closer to the backbone causes tighter packing in the side-chain direction and lower side chain and backbone dynamics.

Influence of side chain isomerism on the rigidity of poly(3-alkylthiophenes) in solutions revealed by neutron scattering

Using small-angle neutron scattering, we conducted a detailed conformational study of poly(3-alkylthiophene) solutions in deuterated dichlorobenzene.

Insights into Magneto-Optics of Helical Conjugated Polymers

Materials with magneto-optic (MO) properties have enabled critical fiber-optic applications and highly sensitive magnetic field sensors. While traditional MO materials are inorganic in nature, new generations of MO materials based on organic semiconducting polymers could allow increased versatility for device architectures, manufacturing options, and flexible mechanics. However, the origin of MO activity in semiconducting polymers is far from understood. In this paper, we report high MO activity observed in a chiral helical poly-3-(alkylsulfone)thiophene (P3AST), which confirms a new design for the creation of a giant Faraday effect with Verdet constants up to (7.63 ± 0.78) × 10⁴ deg T^-1 m^-1 at 532 nm. We have determined that the sign of the Verdet constant and its magnitude are related to the helicity of the polymer at the measured wavelength. The Faraday rotation and the helical conformation of P3AST are modulated by thermal annealing, which is further supported by DFT calculations and MD simulations. Our results demonstrate that helical polymers exhibit enhanced Verdet constants and expand the previous design space for polythiophene MO materials that was thought to be limited to highly regular lamellar structures. The structure-property studies herein provide insights for the design of next-generation MO materials based upon semiconducting organic polymers.

Rational and practical exfoliation of graphite using well-defined poly(3-hexylthiophene) for the preparation of conductive polymer/graphene composite

Processing and manipulation of highly conductive pristine graphene in large quantities are still major challenges in the practical application of graphene for electric device. In the present study, we report the liquid-phase exfoliation of graphite in toluene using well-defined poly(3-hexylthiophene) (P3HT) to produce a P3HT/graphene composite. We synthesize and use regioregular P3HT with controlled molecular weights as conductive dispersants for graphene. Simple ultrasonication of graphite flakes with the P3HT successfully produces single-layer and few-layer graphene sheets dispersed in toluene. The produced P3HT/graphene composite can be used as conductive graphene ink, indicating that the P3HT/graphene composite has high electrical conductivity owing to the high conductivity of P3HT and graphene. The P3HT/graphene composite also works as an oxidation-resistant and conductive film for a copper substrate, which is due to the high gas-barrier property of graphene.

Linear-selective cross-coupling polymerization of branched oligothiophene by deprotonative metalation and cross-coupling

Brominated oligothiophene with a branched structure was subjected to deprotonative metalation with TMPMgCl·LiCl and the thus formed metalated species polymerized with Ni(ii) catalyst to proceed in a linear selective manner through α-α conjugation.

Polythiophene synthesis via halogen dance

Polymerization of thiophene with a Ni(ii) catalyst through halogen dance leads to a new class of polythiophenes.