Topology of Surface Ligands on Liposomes: Characterization Based on the Terms, Incorporation Ratio, Surface Anchor Density, and Reaction Yield

Hypoxia-sensitive miRNA regulation via CRISPR/dCas9 loaded in hybrid exosomes: A novel strategy to improve embryo implantation and prevent placental insufficiency during pregnancy

Assisted reproductive techniques as a new regenerative medicine approach have significantly contributed to solving infertility problems that affect approximately 15% of couples worldwide. However, the success rate of an in vitro fertilization (IVF) cycle remains only about 20%-30%, and 75% of these losses are due to implantation failure (the crucial rate-limiting step of gestation). Implantation failure and abnormal placenta formation are mainly caused by defective adhesion, invasion, and angiogenesis. Placental insufficiency endangers both the mother's and the fetus's health. Therefore, we suggested a novel treatment strategy to improve endometrial receptivity and implantation success rate. In this strategy, regulating mir-30d expression as an upstream transcriptomic modifier of the embryo implantation results in modified expression of the involved genes in embryonic adhesion, invasion, and angiogenesis and consequently impedes implantation failure. For this purpose, "scaffold/matrix attachment regions (S/MARs)" are employed as non-viral episomal vectors, transfecting into trophoblasts by exosome-liposome hybrid carriers. These vectors comprise CRISPR/dCas9 with a guide RNA to exclusively induce miR-30d gene expression in hypoxic stress conditions. In order to avoid concerns about the fetus's genetic manipulation, our vector would be transfected specifically into the trophoblast layer of the blastocyst via binding to trophoblast Erb-B4 receptors without entering the inner cell mass. Additionally, S/MAR episomal vectors do not integrate with the original cell DNA. As an on/off regulatory switch, a hypoxia-sensitive promoter (HRE) is localized upstream of dCas9. The miR-30d expression increases before and during the implantation and placental insufficiency conditions and is extinguished after hypoxia elimination. This hypothesis emphasizes that improving the adhesion, invasion, and angiogenesis in the uterine microenvironment during pregnancy will result in increased implantation success and reduced placental insufficiency, as a new insight in translational medicine.

Microfluidic Post-Insertion Method for the Efficient Preparation of PEGylated Liposomes Using High Functionality and Quality Lipids

Introduction

Targeted liposomes using ligand peptides have been applied to deliver therapeutic agents to the target sites. The post-insertion method is commonly used because targeted liposomes can be prepared by simple mixing of ligand peptide-lipid and liposomes. A large-scale preparation method is required for the clinical application of ligand-peptide-modified liposomes. Large-scale preparation involves an increase in volume and a change in the preparation conditions. Therefore, the physicochemical properties of liposomes may change owing to large alterations in the preparation conditions. To address this issue, we focused on a microfluidic device and developed a novel ligand peptide modification method, the microfluidic post-insertion method.

Methods

We used integrin αvβ3-targeted GRGDS (RGD) and cyclic RGDfK (cRGD)-modified high functionality and quality (HFQ) lipids, which we had previously developed. First, the preparation conditions of the total flow rate in the microfluidic device for modifying HFQ lipids to polyethylene glycol (PEG)-modified (PEGylated) liposomes were optimized by evaluating the physicochemical properties of the liposomes. The targeting ability of integrin αvβ3-expressing colon 26 murine colorectal carcinoma cells was evaluated by comparing the cellular association properties of the liposomes prepared by the conventional post-insertion method.

Results

When the RGD-HFQ lipid was modified into PEGylated liposomes by varying the total flow rate (1, 6, and 12 mL/min) of the microfluidic device, as the total flow rate increased, the polydispersity index also increased, whereas the particle size did not change. Furthermore, the RGD- and cRGD-modified PEGylated liposomes prepared at a total flow rate of 1 mL/min showed high cellular association properties equivalent to those prepared by the conventional post-insertion method.

Conclusion

Microfluidic post-insertion method of HFQ lipids might be useful for clinical application and large-scale preparation of targeted liposomes.

Liposomal Nanocarriers Designed for Sub-Endothelial Matrix Targeting under Vascular Flow Conditions

Vascular interventions result in the disruption of the tunica intima and the exposure of sub-endothelial matrix proteins. Nanoparticles designed to bind to these exposed matrices could provide targeted drug delivery systems aimed at inhibiting dysfunctional vascular remodeling and improving intervention outcomes. Here, we present the progress in the development of targeted liposomal nanocarriers designed for preferential collagen IV binding under simulated static vascular flow conditions. PEGylated liposomes (PLPs), previously established as effective delivery systems in vascular cells types, served as non-targeting controls. Collagen-targeting liposomes (CT-PLPs) were formed by conjugating established collagen-binding peptides to modified lipid heads via click chemistry (CTL), and inserting them at varying mol% either at the time of PLP assembly or via micellar transfer. All groups included fluorescently labeled lipid species for imaging and quantification. Liposomes were exposed to collagen IV matrices statically or via hemodynamic flow, and binding was measured via fluorometric analyses. CT-PLPs formed with 5 mol% CTL at the time of assembly demonstrated the highest binding affinity to collagen IV under static conditions, while maintaining a nanoparticle characterization profile of ~50 nm size and a homogeneity polydispersity index (PDI) of ~0.2 favorable for clinical translation. When liposomes were exposed to collagen matrices within a pressurized flow system, empirically defined CT-PLPs demonstrated significant binding at shear stresses mimetic of physiological through pathological conditions in both the venous and arterial architectures. Furthermore, when human saphenous vein explants were perfused with liposomes within a closed bioreactor system, CT-PLPs demonstrated significant ex vivo binding to diseased vascular tissue. Ongoing studies aim to further develop CT-PLPs for controlled targeting in a rodent model of vascular injury. The CT-PLP nanocarriers established here show promise as the framework for a spatially controlled delivery platform for future application in targeted vascular therapeutics.

Advances in the Formulation and Assembly of Non-Cationic Lipid Nanoparticles for the Medical Application of Gene Therapeutics

Lipid nanoparticles have become increasingly popular delivery platforms in the field of gene therapy, but bench-to-bedside success has been limited. Many liposomal gene vectors are comprised of synthetic cationic lipids, which are associated with lipid-induced cytotoxicity and immunogenicity. Natural, non-cationic PEGylated liposomes (PLPs) demonstrate favorable biocompatibility profiles but are not considered viable gene delivery vehicles due to inefficient nucleic acid loading and reduced cellular uptake. PLPs can be modified with cell-penetrating peptides (CPPs) to enhance the intracellular delivery of liposomal cargo but encapsulate leakage upon CPP-PLP assembly is problematic. Here, we aimed to identify parameters that overcome these performance barriers by incorporating nucleic acid condensers during CPP-PLP assembly and screening variable ethanol injection parameters for optimization. CPP-PLPs were formed with R8-amphiphiles via pre-insertion, post-insertion and post-conjugation techniques and liposomes were characterized for size, surface charge, homogeneity, siRNA encapsulation efficiency and retention and cell associative properties. Herein we demonstrate that pre-insertion of stearylated R8 into PLPs is an efficient method to produce non-cationic CPP-PLPs and we provide additional assembly parameter specifications for a modified ethanol injection technique that is optimized for siRNA encapsulation/retention and enhanced cell association. This assembly technique could provide improved clinical translation of liposomal based gene therapy applications.

Development and screening of brain-targeted lipid-based nanoparticles with enhanced cell penetration and gene delivery properties

Background

The potential of gene therapy for treatment of neurological disorders can be explored using designed lipid-based nanoparticles such as liposomes, which have demonstrated ability to deliver nucleic acid to brain cells. We synthesized liposomes conjugated to cell-penetrating peptides (CPPs) (vascular endothelial-cadherin-derived peptide [pVec], pentapeptide QLPVM and HIV-1 trans-activating protein [TAT]) and transferrin (Tf) ligand, and examined the influence of surface modifications on the liposome delivery capacity and transfection efficiency of encapsulated plasmid DNA. The design of liposomes was based on targeting molecular recognition of transferrin receptor overexpressed on the blood–brain barrier (BBB) with enhanced internalization ability of CPPs.

Methods

CPP-Tf-liposomes were characterized by particle size distribution, zeta potential, protection of encapsulated plasmid DNA, uptake mechanisms and transfection efficiencies. An in vitro triple co-culture BBB model selected the liposomal formulations that were able to cross the in vitro BBB and subsequently, transfect primary neuronal cells. The in vivo biodistribution and biocompatibility of selected formulations were also investigated in mice.

Results

Liposomal formulations were able to protect the encapsulated plasmid DNA against enzymatic degradation and presented low hemolytic potential and low cytotoxicity at 100 nM phospholipid concentration. Cellular internalization of nanoparticles occurred via multiple endocytosis pathways. CPP-Tf-conjugated liposomes mediated robust transfection of brain endothelial (bEnd.3), primary glial and primary neuronal cells. Liposomes modified with Tf and TAT demonstrated superior ability to cross the barrier layer and subsequently, transfect neuronal cells compared to other formulations. Quantification of fluorescently labeled liposomes and in vivo imaging demonstrated that this system could efficiently overcome the BBB and penetrate the brain of mice (7.7% penetration of injected dose).

Conclusion

In vitro screening platforms are important tools to enhance the success of brain-targeted gene delivery systems. The potential of TAT-Tf-liposomes as efficient brain-targeted gene carriers in vitro and in vivo was suggested to be related to the presence of selected moieties on the nanoparticle surface.

A Promising Biocompatible Platform: Lipid-Based and Bio-Inspired Smart Drug Delivery Systems for Cancer Therapy

Designing new drug delivery systems (DDSs) for safer cancer therapy during pre-clinical and clinical applications still constitutes a considerable challenge, despite advances made in related fields. Lipid-based drug delivery systems (LBDDSs) have emerged as biocompatible candidates that overcome many biological obstacles. In particular, a combination of the merits of lipid carriers and functional polymers has maximized drug delivery efficiency. Functionalization of LBDDSs enables the accumulation of anti-cancer drugs at target destinations, which means they are more effective at controlled drug release in tumor microenvironments (TMEs). This review highlights the various types of ligands used to achieve tumor-specific delivery and discusses the strategies used to achieve the effective release of drugs in TMEs and not into healthy tissues. Moreover, innovative recent designs of LBDDSs are also described. These smart systems offer great potential for more advanced cancer therapies that address the challenges posed in this research area.

Dual functionalized liposome-mediated gene delivery across triple co-culture blood brain barrier model and specific in vivo neuronal transfection

Gene therapy has become a promising approach for neurodegenerative disease treatment, however there is an urgent need to develop an efficient gene carrier to transport gene across the blood brain barrier (BBB). In this study, we strategically designed dual functionalized liposomes for efficient neuronal transfection by combining transferrin (Tf) receptor targeting and enhanced cell penetration utilizing penetratin (Pen). A triple cell co-culture model of BBB confirmed the ability of the liposomes to cross the barrier layer and transfect primary neuronal cells. In vivo quantification of PenTf-liposomes demonstrated expressive accumulation in the brain (12%), without any detectable cellular damage or morphological change. The efficacy of these nanoparticles containing plasmid β-galactosidase in modulating transfection was assessed by β-galactosidase expression in vivo. As a consequence of accumulation in the brain, PenTf-liposomes significantly induced gene expression in mice. Immunofluorescence studies of brain sections of mice after tail vein injection of liposomes encapsulating pDNA encoding GFP (pGFP) illustrate the superior ability of dual-functionalized liposomes to accumulate in the brain and transfect neurons. Taken together, the multifunctional liposomes provide an excellent gene delivery platform for neurodegenerative diseases.

Dual Functionalized 5-Fluorouracil Liposomes as Highly Efficient Nanomedicine for Glioblastoma Treatment as Assessed in an In Vitro Brain Tumor Model

Drug delivery to the brain has been a major challenge due to the presence of the blood-brain barrier, which limits the uptake of most chemotherapeutics into brain. We developed a dual-functionalized liposomal delivery system, conjugating cell penetrating peptide penetratin to transferrin-liposomes (Tf-Pen-conjugated liposomes) to enhance the transport of an anticancer chemotherapeutic drug, 5-fluorouracil (5-FU), across the blood-brain barrier into the tumor cells. The in vitro cellular uptake study showed that the dual-functionalized liposomes are capable of higher cellular uptake in glioblastoma (U87) and brain endothelial (bEnd.3) cells monolayer. In addition, dual-functionalized liposomes demonstrated significantly higher apoptosis in U87 cells. The liposomal nanoparticles showed excellent blood compatibility and in vitro cell viability, as studied by hemolysis and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay, respectively. The 5-FU-loaded dual-functionalized liposomes demonstrated higher transport across the brain endothelial barrier and delivered 5-FU to tumor cells inside poly(lactic-co-glycolic acid)-chitosan scaffold (an in vitro brain tumor model), resulting in significant tumor regression.