Spectrofluorimetric Determination of Paroxetine Hydrochloride in Its Formulations and Human Plasma

Development of a Green Microwell Spectrofluorimetric Assay with High Analytical Throughput for the Determination of Selective Serotonin Reuptake Inhibitors in Pharmaceutical Dosage Forms and Plasma

In this study, a new green microwell spectrofluorimetric assay (MW-SFA) with high throughput was developed and validated, for the first time, for the determination of three selective serotonin reuptake inhibitors (SSRIs) in pharmaceutical dosage forms and plasma. These SSRIs were fluoxetine (FLX), fluvoxamine (FXM), and paroxetine (PXT), which are commonly prescribed drugs for depression treatment. The MW-SFA is based on the condensation reaction of SSRIs with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole (NBD-Cl) in alkaline media to form highly fluorescent derivatives. The MW-SFA procedures were conducted in 96-microwell white opaque assay plates with a flat bottom and the fluorescence signals were measured using a microplate reader at their maximum excitation and emission wavelengths. The calibration curves were generated with good correlation coefficients (0.9992-0.9995) between the relative fluorescence intensity (RFI) and the SSRI concentrations in the range of 35-800 ng/mL. The limits of detection were in the range of 11-25 ng/mL, and the precision and accuracy were satisfactory. The proposed MW-SFA was successfully applied to the analysis of the SSRIs in their pharmaceutical dosage forms. The statistical analysis for the comparison between the MW-SFA assay results and those of pharmacopeial assays showed no significant differences between the assays in terms of their accuracy and precision. The application of the proposed MW-SFA was extended to successfully analyze SSRIs in plasma samples. The greenness of the assay was confirmed using three different metric tools. The assay was characterized with high throughput properties, enabling the sensitive simultaneous analysis of many samples in a short time. This assay is valuable for rapid routine applications in pharmaceutical quality control units and clinical laboratories for the determination of SSRIs.

New spectrofluorimetric method with enhanced sensitivity for determination of paroxetine in dosage forms and plasma

New simple spectrofluorimetric method with enhanced sensitivity has been developed and validated for the determination of the antidepressant paroxetine (PXT) in its dosage forms and plasma. The method was based on nucleophilic substitution reaction of PXT with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole in an alkaline medium (pH 8) to form a highly fluorescent derivative that was measured at 545 nm after excitation at 490 nm. The factors affecting the reaction was carefully studied and optimized. The kinetics of the reaction was investigated, and the reaction mechanism was presented. Under the optimized conditions, linear relationship with good correlation coefficient (0.9993) was found between the fluorescence intensity and PXT concentration in the range of 80-800 ng ml(-1). The limits of detection and quantitation for the method were 25 and 77 ng ml(-1), respectively. The precision of the method was satisfactory; the values of relative standard deviations did not exceed 3%. The proposed method was successfully applied to the determination of PXT in its pharmaceutical tablets with good accuracy; the recovery values were 100.2 +/- 1.61%. The results obtained by the proposed method were comparable with those obtained by the official method. The proposed method is superior to the previously reported spectrofluorimetric method for determination of PXT in terms of its higher sensitivity and wider linear range. The high sensitivity of the method allowed its successful application to the analysis of PXT in spiked human plasma. The proposed method is practical and valuable for its routine application in quality control and clinical laboratories for analysis of PXT.

Stability-indicating high performance thin layer chromatography determination of Paroxetine hydrochloride in bulk drug and pharmaceutical formulations

A simple selective precise and stability-indicating high performance thin layer chromatographic method of analysis of Paroxetine hydrochloride both as a bulk drug and in formulations was developed and validated. The method employed TLC (Thin Layer Chromatography) aluminum precoated with silica gel 60F-254 as the stationary phase. The solvent system consisted of butanol:acetic acid:water (8:2:0.5, v/v/v). This system was found to give compact spots for Paroxetine HCl (Rf, retardation factor, value-0.48+/-0.02). Paroxteine HCl was subjected to acid and alkali hydrolysis, oxidation and photodegradation, where the degraded product was well separated from the pure drug. Densitometric analysis of Paroxetine hydrochloride was carried out in the absorbance mode at 295 nm. The linear regression analysis data for the calibration spots showed good relationship with (regression) r2 = 0.9903 in the amount range of 300-1500 ng (nanogram) per spot. The mean value of co-relation co-efficient, slope and intercept were 0.9903+/-0.001, 5.38+/-0.058 and 182.5+/-2.16 respectively. The method was validated for precision, recovery and robustness. The limits of detection and quantitation were 50 and 150 ng, respectively. The drug does not undergo degradation with oxidation, but gets affected in acidic and alkaline conditions. The acid and alkali degradation showed extra peaks at 0.4 and 0.08 Rf, respectively. This indicates that the drug is susceptible to acidic and alkaline medium. As the method could effectively separate the drug from its degradation products, it can be employed as a stability-indicating one.