Novel bioequivalent oral disintegrating tablet of aripiprazole prepared by direct compression technique with shortened disintegration time

Herein, we aimed to formulate a novel oral disintegrating tablet (ODT) of aripiprazole (ARP) capable of rapid disintegration using a direct compression technique. Different ODTs were fabricated with directly compressible excipients, and their disintegration time, wettability (water absorption ratio and wetting time), and mechanical properties (hardness and friability) were evaluated. The optimized ODT comprised F-Melt® type C, Prosolv® SMCC HD90, and Na croscarmellose (10 mg of ARP in a 130 mg tablet). The ODT with 3.1-5.2 kp hardness exhibited rapid disintegration (14.1-17.2 sec), along with appropriate mechanical strength (friability < 0.24%). In a bioequivalent study in Korean healthy subjects (randomized, single-dose, two-period crossover design, n = 37), the novel ODT offered the equivalent pharmacokinetic profile to that of a conventional immediate release tablet (Otsuka, Abilify®, Japan), despite different disintegration and dissolution profiles. The 90% confidence intervals of the geometric mean test to reference ratios considering the area-under-the-curve and maximum plasma drug concentrations were 1.0306-11051 and 0.9448-1.1063, respectively, satisfying FDA regulatory criteria for bioequivalence. The novel ART ODT was physicochemically stable under the accelerated storage condition (40 °C, RH75%) for 24 weeks. Therefore, the novel ARP-loaded ODT is expected to be an alternative to oral ARP therapy, providing improved patient adherence.

Critical Analysis and Optimization of Stoichiometric Ratio of Drug-Coformer on Cocrystal Design: Molecular Docking, In Vitro and In Vivo Assessment

In this present research, an attempt has been made to address the influence of drug-coformer stoichiometric ratio on cocrystal design and its impact on improvement of solubility and dissolution, as well as bioavailability of poorly soluble telmisartan. The chemistry behind cocrystallization and the optimization of drug-coformer molar ratio were explored by the molecular docking approach, and theoretical were implemented practically to solve the solubility as well as bioavailability related issues of telmisartan. A new multicomponent solid form, i.e., cocrystal, was fabricated using different molar ratios of telmisartan and maleic acid, and characterized by SEM, DSC and XRD studies. The molecular docking study suggested that specific molar ratios of drug-coformer can successfully cluster with each other and form a specific geometry with favourable energy conformation to form cocrystals. Synthesized telmisartan-maleic acid cocrystals showed remarkable improvement in solubility and dissolution of telmisartan by 9.08-fold and 3.11-fold, respectively. A SEM study revealed the formation of cocrystals of telmisartan when treated with maleic acid. DSC and XRD studies also confirmed the conversion of crystalline telmisartan into its cocrystal state upon treating with maleic acid. Preclinical investigation revealed significant improvement in the efficacy of optimized cocrystals in terms of plasma drug concentration, indicating enhanced bioavailability through improved solubility as well as dissolution of telmisartan cocrystals. The present research concluded that molecular docking is an important path in selecting an appropriate stoichiometric ratio of telmisartan: maleic acid to form cocrystals and improve the solubility, dissolution, and bioavailability of poorly soluble telmisartan.

3D printed oral solid dosage form: Modified release and improved solubility

Oral solid dosage form is currently the most common used form of drug. 3D Printing, also known as additive manufacturing (AM), can quickly print customized and individualized oral solid dosage form on demand. Compared with the traditional tablet manufacturing process, 3D Printing has many advantages. By rationally selecting the formulation composition and cleverly designing the printing structure, 3D printing can improve the solubility of the drug and achieve precise modify of the drug release. 3D printed oral solid dosage form, however, still has problems such as limitations in formulation selection. And the selection process of the formulation lacks scientificity and standardization. Structural design of some 3D printing approaches is relatively scarce. This article reviews the formulation selection and structure design of 3D printed oral solid dosage form, providing more ideas for achieving modified drug release and solubility improvement of 3D printed oral solid dosage form through more scientific and extensive formulation selection and more sophisticated structural design.

QbD Consideration for Developing a Double-Layered Tablet into a Single-Layered Tablet with Telmisartan and Amlodipine

The aim of this study was to develop a single-layered version of commercially available Twynstar^® (Telmisartan + Amlodipine) double-layered tablets to improve the dosing convenience. A quality-by-design approach was applied to develop the single-layered version. To evaluate the range and cause of risks for a single-layered tablet in the formulation design research, we used the tools of the risk assessment, initial risk assessment of preliminary hazard analysis and main risk assessment of failure mode and effect analysis to determine the parameters affecting formulation, drug dissolution, and impurities. The critical material attributes were the stabilizer and disintegrant, and the critical process parameters were the wet granulation and tableting process. The optimal range of the design space was determined using the central composite design in the wet granulation and tablet compression processes. The stabilizer, kneading time, and disintegrant of the wet granulation were identified as X values affecting Y values. The compression force and turret speed in the tablet compression were identified as X values affecting Y values. After deciding on the design space with the deduced Y values, the single-layered tablets were formulated, and their dissolution patterns were compared with that of the double-layered tablet. The selected quality-by-design (QbD) approach single-layered tablet formulated using design space were found to be bioequivalent to the Twynstar^® double-layered tablets. Hence, the development of single-layered tablets with two API using the QbD approach could improve the medication compliance of patients and could be used as a platform to overcome time-consuming and excessive costs and the technical and commercial limitations related to various multi-layered tablets.

Development of L-Lysine Amino Acid-Based Co-Crystal of Telmisartan Using Crystal Engineering Approach to Improve Solubility, Dissolution, and Micrometric Properties

AIM

To develop a co-crytsal of Telmisartan for enhancing its solubility in water.

BACKGROUND

Intermolecular interaction happens in crystal packing; it utilizes and helps to understand the design of new solid with their respective chemical and physical properties called crystal engineering. It is a blueprint of molecular solids with specific chemical and physical properties through an understanding and handling of intermolecular interaction for increasing the solubility, in case of poor water-soluble drugs.

OBJECTIVES

The study was taken under consideration with an aim to generate and synthesize a cocrystal form of Telmisartan (TEL) with L-lysine to improve its water solubility, dissolution, and micrometric properties.

METHODS

Using dry grinding technique, solvent evaporation and cooling crystallization, the results revealed a generation of co-crystals with enhanced solubility by liquid drop grinding method. Hence, this process was further explored to investigate various formulations and process parameters that could significantly affect the crystal solubility, dissolution, and micrometric properties.

RESULTS

The solubility of TEL co-crystals was enhanced by L-lysine. Further, the optimized batch was subjected to its micrometric evaluation and physiochemical characterization like FT-IR, NMR, PXRD. The result of the micrometric evaluation showed better results as compared to standards. The dissolution studies also showed a better dissolution rate for TEL co-crystal tablets than TEL tablets formulation.

CONCLUSION

Co-crystals of TEL with L-lysine showed better solubility and dissolution rate.

Quality-by-design approach for the development of telmisartan potassium tablets

A quality-by-design approach was adopted to develop telmisartan potassium (TP) tablets, which were bioequivalent with the commercially available Micardis^® (telmisartan free base) tablets. The dissolution pattern and impurity profile of TP tablets differed from those of Micardis^® tablets because telmisartan free base is poorly soluble in water. After identifying the quality target product profile and critical quality attributes (CQAs), drug dissolution, and impurities were predicted to be risky CQAs. To determine the exact range and cause of risks, we used the risk assessment (RA) tools, preliminary hazard analysis and failure mode and effect analysis to determine the parameters affecting drug dissolution, impurities, and formulation. The range of the design space was optimized using the face-centered central composite design among the design of experiment (DOE) methods. The binder, disintegrant, and kneading time in the wet granulation were identified as X values affecting Y values (disintegration, hardness, friability, dissolution, and impurities). After determining the design space with the desired Y values, the TP tablets were formulated and their dissolution pattern was compared with that of the reference tablet. The selected TP tablet formulated using design space showed a similar dissolution to that of Micardis^® tablets at pH 7.5. The QbD approach TP tablet was bioequivalent to Micardis^® tablets in beagle dogs.

Cocrystals of telmisartan: characterization, structure elucidation, in vivo and toxicity studies

The present study reports novel cocrystals of telmisartan (TEL) with saccharin and glutaric acid.

Enhancement of dissolution of Telmisartan through use of solid dispersion technique - surface solid dispersion

The present study was aimed to increase the solubility of the poorly water soluble drug Telmisartan by using Surface solid dispersion (SSD) made of polymers like Poloxamer 407, PEG 6000 by Solvent evaporation method. The drug was solubilized by surfactants and/or polymers then adsorbed onto the surface of extremely fine carriers to increase its surface area and to form the SSD which give the more Surface area for absorption of the drug. A 2² full factorial design was used to investigate for each carrier the joint influence of formulation variables: Amount of carrier and adsorbent. Saturation solubility studies shows the improvement in solubility of drug batch SSD 8 give more solubility improvement than the other batch, in-vitro dissolution of pure drug, physical mixtures and SSDs were carried out in that SSDs were found to be effective in increasing the dissolution rate of Telmisartan in form of SSD when compared to pure drug. Also FT-IR spectroscopy, differential scanning calorimetry and X-ray diffractometry studies were carried out in order to characterize the drug and Surface solid dispersion. Furthermore, both DSC and X-ray diffraction showed a decrease in the melting enthalpy and reduced drug crystallinity consequently in SSDs. However, infrared spectroscopy revealed no drug interactions with the carriers.

Formulation and in vitro evaluation of taste-masked oro-dispersible dosage form of diltiazem hydrochloride

Diltiazem hydrochloride is a calcium channel blocker generally indicated for the treatment of angina and hypertension, and it is extensively metabolized due to the hepatic metabolism. Formulation of diltiazem hydrochloride into an oro-dispersible dosage form can provide fast relief with higher bioavailability. The bitter taste of the drug should be masked to formulate it in a palatable form. In the present work, an attempt was made to mask the taste by complexation technique, with a formulation into an oro-dispersible dosage form, using superdisintegrants Doshion P544, crospovidone (CP) and sodium starch glycolate (SSG). The complexes of diltiazem hydrochloride with β-CD (1:1 molar ratio) were prepared by kneading, co-evaporation, co-grounding, freeze-drying and melting methods. Phase solubility showed stability constant 819.13M-1. Prepared inclusion complexes were evaluated for taste masking and characterized by I.R, XRD, DSC. Using the drug β-CD complex, oro-dispersible tablets were prepared and evaluated for hardness, friability, weight variation, thickness, disintegrating time (DT), dissolution rate and taste. Formulations with 4 % Doshion, 8 % CP and 4 % SSG showed DT of 0.54, 0.35 and 1.23 minutes, respectively.