Endogenous stem cell mobilization and localized immunosuppression synergistically ameliorate DSS-induced Colitis in mice

BACKGROUND

Stem cell therapy is a promising alternative for inflammatory diseases and tissue injury treatment. Exogenous delivery of mesenchymal stem cells is associated with instant blood-mediated inflammatory reactions, mechanical stress during administration, and replicative senescence or change in phenotype during long-term culture in vitro. In this study, we aimed to mobilize endogenous hematopoietic stem cells (HSCs) using AMD-3100 and provide local immune suppression using FK506, an immunosuppressive drug, for the treatment of inflammatory bowel diseases.

METHODS

Reactive oxygen species (ROS)-responsive FK506-loaded thioketal microspheres were prepared by emulsification solvent-evaporation method. Thioketal vehicle based FK506 microspheres and AMD3100 were co-administered into male C57BL6/J mice with dextran sulfate sodium (DSS) induced colitis. The effect of FK506-loaded thioketal microspheres in colitis mice were evaluated using disease severity index, myeloperoxidase activity, histology, flow cytometry, and gene expression by qRT-PCR.

RESULTS

The delivery of AMD-3100 enhanced mobilization of HSCs from the bone marrow into the inflamed colon of mice. Furthermore, targeted oral delivery of FK506 in an inflamed colon inhibited the immune activation in the colon. In the DSS-induced colitis mouse model, the combination of AMD-3100 and FK506-loaded thioketal microspheres ameliorated the disease, decreased immune cell infiltration and activation, and improved body weight, colon length, and epithelial healing process.

CONCLUSION

This study shows that the significant increase in the percentage of mobilized hematopoietic stem cells in the combination therapy of AMD and oral FK506 microspheres may contribute to a synergistic therapeutic effect. Thus, low-dose local delivery of FK506 combined with AMD3100 could be a promising alternative treatment for inflammatory bowel diseases.

Injectable testosterone PLGA microsphere with different characteristics: effect of preparation method (paddle mixing versus microfluidic device)

The purpose of this study was to compare the characteristics of testosterone polylactic-co-glycolic (PLGA) microspheres prepared by a paddle mixer or microfluidics device. The comparison was conducted by not only in vitro evaluation but also in vivo evaluation which has not been reported up to date. We discovered that, among the steps in microsphere preparation, the solvent removal process strongly impacted drug content, particle size and surface morphology. Spectroscopic measurements suggested that molecular interactions and crystallinity of the drug incorporated in the microspheres differed. For the drug release profile, although both mixer- and microfluidics-prepared samples showed similar sustained release of the incorporated drug for approximately one month in vitro, they exhibited different plasma concentration profiles in vivo. Together, our findings show that the preparation process, especially the solvent removal process, may affect the physicochemical characteristics of testosterone PLGA microspheres, leading to different in vivo performance.

Optimization of O/W Emulsion Solvent Evaporation Method for Itraconazole Sustained Release Microspheres

Itraconazole, a commonly used antifungal drug in the clinic approved by U.S. Food and Drug Administration (FDA), has been gradually found to have anti-tumor, angiogenesis inhibition and other pharmacological activities. However, its poor water solubility and potential toxicity limited its clinical application. In order to improve the water solubility and reduce the side effects caused by the high concentration of itraconazole, a novel preparation method of itraconazole sustained release microspheres was established in this study. Firstly, five kinds of polylactic acid-glycolic acid (PLGA) microspheres loaded with itraconazole were prepared by oil/water (O/W) emulsion solvent evaporation and then characterized by infrared spectroscopy. Then the particle size and morphology of the microspheres were observed by scanning electron microscope (SEM) and transmission electron microscope (TEM). After that, the particle size distribution, drug loading rate, entrapment efficiency, and drug release experiments were evaluated. Our results showed the microspheres prepared in this study had uniform particle size distribution and good integrity. Further study found that the average drug loading of the five kinds of microspheres prepared with PLGA 7505, PLGA 7510, PLGA 7520, PLGA 5020 and PLGA 0020 were 16.88, 17.72, 16.72, 16.57, and 16.64%, respectively, and the encapsulation rate all reached about 100%. More surprisingly, the release experimental results showed that the microspheres prepared with PLGA 7520 did not show sudden release, showing good sustained release performance and high drug release rate. To sum up, this study optimized the preparation method of sustained-release microspheres without sudden release, which provides a new solution for the delivery of itraconazole in the clinic.

Preparation and in Vitro Evaluation of Osmotic-Pump Lorcaserin-hydrochloride Controlled-Release Tablets

Long-term and constant-release osmotic-pump lorcaserin hydrochloride controlled-release tablets (OP LH CRTs) were prepared, to investigate the influencing factors of LH release and optimize the formulation. The mechanism of release of LH from OP LH CRTs in vitro was investigated. By establishing a high-efficiency method for measuring LH release in vitro, and optimizing it by single-factor and orthogonal experiments, the best formulation of OP LH CRTs was determined. Then, the optimal prescription of OP LH CRTs was: LH = 20.8 mg; mannitol = 100 mg, microcrystalline cellulose = 125 mg; magnesium stearate = 5 mg; cellulose acetate = 3%; polyethylene glycol 400 = 10%; dibutyl phthalate = 10%; Wetting agent and binder was 3% polyvinyl pyrrolidone (PVP) K30 ethanol solution; aperture diameter = 0.8 mm; the coating gained 3% weight. And finally, prepared OP LH CRTs were released at a constant rate in vitro and sustained for 16 h with good reproducibility between batches. Using an orthogonal experimental design, OP LH CRTs with remarkable zero-order release characteristics within 16 h were obtained, and formulation optimization was realized.

Changing the daily injection of glatiramer acetate to a monthly long acting product through designing polyester-based polymeric microspheres

Introduction: Glatiramer acetate (GA) is a newly emerged therapeutic peptide to reduce the frequency of relapses in multiple sclerosis (MS). Despite its good performance in controlling MS, it is not widely used due to daily or biweekly subcutaneous injections due to rapid degradation and body clearance. Therefore, implant design with sustained release leads to prolonged biological effects by gradually increasing drug exposure and protecting GA from rapid local degradation. Methods: Different emulsion methods, PLGA type, surfactant concentration, drug/polymer ratio, drying processes, stirring method, and other variables in preliminary studies modified the final formulation. The release kinetics were studied through mechanistic kinetic models such as zero-order, Weibull, Higuchi, etc. In this study, all challenges for easy scale-up, methodological detail, and a simple, feasible setup in mass production were discussed. Results: The optimized formulation was obtained by 1:6 drug/PLGA, 0.5% w/w polyvinyl alcohol, and 0.75% w/w NaCl in the external aqueous phase, 1:10 continuous phase to dispersed phase ratio, and without any surfactant in the primary emulsion. The final freeze-dried particles presented a narrow distributed size of 1-10 µm with 7.29% ± 0.51 drug loading and zero-order release behavior with appropriate regression correlation (R2 98.7), complete release, and only 7.1% initial burst release. Conclusion: Therefore, to achieve improvement in patient compliance through better and longer efficacy, designing the parenteral sustained release microspheres (MPSs) of this immune modulator is a promising approach that should be considered.

Particle engineering principles and technologies for pharmaceutical biologics

The global market of pharmaceutical biologics has expanded significantly during the last few decades. Currently, pharmaceutical biologic products constitute an indispensable part of the modern medicines. Most pharmaceutical biologic products are injections either in the forms of solutions or lyophilized powders because of their low oral bioavailability. There are certain pharmaceutical biologic entities formulated into particulate delivery systems for the administration via non-invasive routes or to achieve prolonged pharmaceutical actions to reduce the frequency of injections. It has been well documented that the design of nano- and microparticles via various particle engineering technologies could render pharmaceutical biologics with certain benefits including improved stability, enhanced intracellular uptake, prolonged pharmacological effect, enhanced bioavailability, reduced side effects, and improved patient compliance. Herein, we review the principles of the particle engineering technologies based on bottom-up approach and present the important formulation and process parameters that influence the critical quality attributes with some mathematical models. Subsequently, various nano- and microparticle engineering technologies used to formulate or process pharmaceutical biologic entities are reviewed. Lastly, an array of commercialized products of pharmaceutical biologics accomplished based on various particle engineering technologies are presented and the challenges in the development of particulate delivery systems for pharmaceutical biologics are discussed.

PLGA-based biodegradable microspheres in drug delivery: recent advances in research and application

Biodegradable microspheres have been widely used in the field of medicine due to their ability to deliver drug molecules of various properties through multiple pathways and their advantages of low dose and low side effects. Poly (lactic-co-glycolic acid) copolymer (PLGA) is one of the most widely used biodegradable material currently and has good biocompatibility. In application, PLGA with a specific monomer ratio (lactic acid and glycolic acid) can be selected according to the properties of drug molecules and the requirements of the drug release rate. PLGA-based biodegradable microspheres have been studied in the field of drug delivery, including the delivery of various anticancer drugs, protein or peptide drugs, bacterial or viral DNA, etc. This review describes the basic knowledge and current situation of PLGA biodegradable microspheres and discusses the selection of PLGA polymer materials. Then, the preparation methods of PLGA microspheres are introduced, including emulsification, microfluidic technology, electrospray, and spray drying. Finally, this review summarizes the application of PLGA microspheres in drug delivery and the treatment of pulmonary and ocular-related diseases.

Particulate-Based Single-Dose Local Immunosuppressive Regimen for Inducing Tolerogenic Dendritic Cells in Xenogeneic Islet Transplantation

Recent studies emphasize on developing immune tolerance by an interim administration of various immunosuppressive drugs. In this study, a robust protocol is reported for local immunomodulation using a single-dose of FK506 microspheres and clodronate liposomes (mFK+CLO) in a xenogeneic model of islet transplantation. Surprisingly, the single-dose treatment with mFK+CLO induce tolerance to the islet xenograft. The recipient mice display tolerogenic dendritic cells (tDCs) with decreased antigen presenting ability and T cell activation capacity. Furthermore, a reduced percentage of CD4⁺ and CD8⁺ T cells and an impaired differentiation of naïve CD4⁺ T cells into interferon-γ producing Th1 and interleukin-17 producing Th17 cells are observed. In addition, the immunosuppressive protocol leads to the generation of Foxp3⁺ regulatory T cells (Tregs) which are required for the long-term graft survival. The enhanced generation of tDCs and Tregs by the single treatment of mFK+CLO cause xenograft tolerance, suggesting a possible clinical strategy which may pave the way towards improving therapeutic outcomes of clinical islet transplantation.

Quality by design thinking in the development of long-acting injectable PLGA/PLA-based microspheres for peptide and protein drug delivery

Adopting the Quality by Design (QbD) approach in the drug development process has transformed from "nice-to-do" into a crucial and required part of the development, ensuring the quality of pharmaceutical products throughout their whole life cycles. This review is discussing the implementation of the QbD thinking into the production of long-acting injectable (LAI) PLGA/PLA-based microspheres for the therapeutic peptide and protein drug delivery. Various key elements of the QbD approaches are initially elaborated using Bydureon®, a commercial product of LAI PLGA/PLA-based microspheres, as a classical example. Subsequently, the factors influencing the release patterns and the stability of the peptide and protein drugs are discussed. This is followed by a summary of the state-of-the-art of manufacturing LAI PLGA/PLA-based microspheres and the related critical process parameters (CPPs). Finally, a landscape of generic product development of LAI PLGA/PLA-based microspheres is reviewed including some major challenges in the field.

Design of a Novel Oxygen Therapeutic Using Polymeric Hydrogel Microcapsules Mimicking Red Blood Cells

The goal of this research was to develop a novel oxygen therapeutic made from a pectin-based hydrogel microcapsule carrier mimicking red blood cells. The study focused on three main criteria for developing the oxygen therapeutic to mimic red blood cells: size (5–10 μm), morphology (biconcave shape), and functionality (encapsulation of oxygen carriers; e.g., hemoglobin (Hb)). The hydrogel carriers were generated via the electrospraying of the pectin-based solution into an oligochitosan crosslinking solution using an electrospinning setup. The pectin-based solution was investigated first to develop the simplest possible formulation for electrospray. Then, Design-Expert^® software was used to optimize the production process of the hydrogel microcapsules. The optimal parameters were obtained through the analysis of a total of 17 trials and the microcapsule with the desired morphology and size was successfully prepared under the optimized condition. Fourier transform infrared spectroscopy (FTIR) was used to analyze the chemistry of the microcapsules. Moreover, the encapsulation of Hb into the microcapsule did not adversely affect the microcapsule preparation process, and the encapsulation efficiency was high (99.99%). The produced hydrogel microcapsule system shows great promise for creating a novel oxygen therapeutic.

Synthesis of poly(lactide-co-glycerol) as a biodegradable and biocompatible polymer with high loading capacity for dermal drug delivery

Due to the low cutaneous bioavailability of tacrolimus (TAC), penetration enhancers are used to improve its penetration into the skin. However, poor loading capacity, non-biodegradability, toxicity, and in some cases inefficient skin penetration are challenging issues that hamper their applications for the dermal TAC delivery. Here we present poly(lactide-co-glycerol) (PLG) as a water soluble, biodegradable, and biocompatible TAC-carrier with high loading capacity (14.5% w/w for TAC) and high drug delivery efficiencies into the skin. PLG was synthesized by cationic ring-opening copolymerization of a mixture of glycidol and lactide and showed 35 nm and 300 nm average sizes in aqueous solutions before and after loading of TAC, respectively. Delivery experiments on human skin, quantified by fluorescence microscopy and LC-MS/MS, showed a high ability for PLG to deposit Nile red and TAC into the stratum corneum and viable epidermis of skin in comparison with Protopic® (0.03% w/w, TAC ointment). The cutaneous distribution profile of delivered TAC proved that 80%, 16%, and 4% of the cutaneous drug level was deposited in the stratum corneum, viable epidermis, and upper dermis, respectively. TAC delivered by PLG was able to efficiently decrease the IL-2 and TSLP expressions in human skin models. Taking advantage of the excellent physicochemical and biological properties of PLG, it can be used for efficient dermal TAC delivery and potential treatment of inflammatory skin diseases.

Polymeric microsphere-facilitated site-specific delivery of quercetin prevents senescence of pancreatic islets in vivo and improves transplantation outcomes in mouse model of diabetes

Attenuation of senescence progression may be attractive way to preserve the functionality of pancreatic islets (PI) after transplantation. In this study, we developed a model for in vitro induction of premature senescence in rat PI and showed the effectiveness of quercetin (QU) to prevent the senescence. To provide targeted-delivery of QU to the PI after transplantation, we prepared the hybrid clusters (HC) of islet single cells (ISC) and QU-loaded polymeric microspheres (QU; ∼7.55 ng HC^-1). Long-term culture of the HC revealed reduced levels of reactive oxygen species and decreased expression of senescence-associated beta galactosidase, Rb, p53, p16, and p21 compared to that of the control islets. Transplantation of HC into subcutaneous space of the immune-deficient mice produced better glycemic control compared to the control islets or the ICC-transplanted mice. SA-β-Gal staining of the in vivo transplanted HC sample showed lower intensity compared to that of the control islets or the islet cell clusters. Thus, in situ delivery of therapeutic agent may be a promising approach to improve therapeutic outcomes in cell therapy.

STATEMENT OF SIGNIFICANCE

In this study, we aimed to improve outcomes in islet transplantation using in situ delivery of quercetin to pancreatic islets, using polymeric microspheres. We prepared prolonged release-type microspheres and constructed hybrid clusters of pancreatic islets and the microspheres using hanging drop method. The presence of quercetin in the cellular microenvironment attenuated the progression of senescence in the pancreatic islets in a long-term in vitro culture. Moreover, transplantation of the hybrid clusters in the diabetic mice produced better glycemic control compared to that of the control islets. In addition, quercetin delayed the progression of senescence in the pancreatic islets after in vivo transplantation. Thus, local delivery of antioxidants like quercetin may be an attractive way to improve outcomes in cell therapy.

Poly(methyl vinyl ether-co-maleic acid) for enhancement of solubility, oral bioavailability and anti-osteoporotic effects of raloxifene hydrochloride

Raloxifene HCl (RH) has poor water solubility and due to its extensive first pass metabolism; its bioavailability is only 2%. The purpose of the present study was to enhance the aqueous solubility, oral bioavailability and anti-osteoporotic effects of RH by electro-sprayed nanoparticles (NPs) in ovariectomized rats. NPs containing RH and different ratio of poly(methyl vinyl ether-co-maleic acid) (PMVEMA) were electrosprayed. The voltage, distance of needle to the collector, flow rate of the solution and polymeric percentage were optimized according to the size of NPs and drug solubility. The optimized formulation was characterized by SEM, XRD, DSC, and FTIR. The pharmacokinetic parameters were studies by oral administration of a single dose of 15mg/kg in Wistar rats. The anti-osteoporotic effects were studied in female ovariectomized rats. Animals were treated with 6mg/kg/day for 2months then serum calcium, phosphorous and alkaline phosphatase levels were measured. RH loaded electrosprayed NPs showed 10-fold enhanced solubility compared to the free drug. Moreover, the XRD and SEM tests displayed an amorphous state of drug in the NPs. FTIR and DSC tests revealed no interaction between the polymer and the drug. Serum calcium, phosphorous and alkaline phosphatase levels were significantly decreased in ovariectomized rats receiving oral RH NPs (P<0.05). No significant difference was detected between RH NPs and estradiol groups (P>0.05). Oral bioavailability of NPs showed 7.5-fold increase compared to the pure drug. The electrosprayed PMVEMA nanoparticles can enhance solubility, bioavailability and antiosteoporotic effects of RH.

Single synchronous delivery of FK506-loaded polymeric microspheres with pancreatic islets for the successful treatment of streptozocin-induced diabetes in mice

Immune rejection after transplantation is common, which leads to prompt failure of the graft. Therefore, to prolong the survival time of the graft, immunosuppressive therapy is the norm. Here, we report a robust immune protection protocol using FK506-loaded microspheres (FK506M) in injectable hydrogel. Pancreatic islets were codelivered with the FK506M into the subcutaneous space of streptozocin-induced diabetic mice. The islets codelivered with 10 mg/kg FK506M maintained normal blood glucose levels during the study period (survival rate: 60%). However, transplantation of islets and FK506M at different sites hardly controlled the blood glucose level (survival rate: 20%). Immunohistochemical analysis revealed an intact morphology of the islets transplanted with FK506M. In addition, minimal number of immune cells invaded inside the gel of the islet-FK506M group. The single injection of FK506M into the local microenvironment effectively inhibited immune rejection and prolonged the survival time of transplanted islets in a xenograft model.

A three-dimensional assemblage of gingiva-derived mesenchymal stem cells and NO-releasing microspheres for improved differentiation

Stem cell therapy is an attractive approach to bone tissue regeneration. Nitric oxide (NO) has been reported to facilitate osteogenic differentiation of stem cells. To enhance osteogenic differentiation of gingiva-derived mesenchymal stem cells (GMSCs), we designed a method for in situ delivery of exogenous NO to these cells. A NO donor, polyethylenimine/NONOate, was incorporated into poly(lactic-co-glycolic acid) microspheres to deliver NO to the cells for an extended period of time under in vitro culture conditions. A hybrid aggregate of GMSCs and NO-releasing microspheres was prepared by the hanging drop technique. Confocal microscopy revealed homogeneous arrangement of the stem cells and microspheres in heterospheroids. Western blot analysis and live-dead imaging showed no significant change in cell viability. Importantly, the in situ delivery of NO within the heterospheroids enhanced osteogenic differentiation indicated by a 1.2-fold increase in alkaline phosphatase activity and an approximately 10% increase in alizarin red staining. In addition, a low dose of NO promoted proliferation of the GMSCs in this 3D system. Thus, delivery of the NO-releasing microsphers to induce differentiation of stem cells within this three dimensional system may be one of possible strategies to direct differentiation of a stem cell-based therapeutic agent toward a specific lineage.

Potential differentiation ability of gingiva originated human mesenchymal stem cell in the presence of tacrolimus

The aim of the present study is to evaluate the potential differentiation ability of gingiva originated human mesenchymal stem cell in the presence of tacrolimus. Tacrolimus-loaded poly(lactic-co-glycolic acid) microspheres were prepared using electrospraying technique. In vitro release study of tacrolimus-loaded poly(lactic-co-glycolic acid) microspheres was performed in phosphate-buffered saline (pH 7.4). Gingiva-derived stem cells were isolated and incubated with tacrolimus or tacrolimus-loaded microspheres. Release study of the microspheres revealed prolonged release profiles of tacrolimus without any significant initial burst release. The microsphere itself did not affect the morphology of the mesenchymal stem cells, and cell morphology was retained after incubation with microspheres loaded with tacrolimus at 1 μg/mL to 10 μg/mL. Cultures grown in the presence of microspheres loaded with tacrolimus at 1 μg/mL showed the highest mineralization. Alkaline phosphatase activity increased with an increase in incubation time. The highest expression of pSmad1/5 was achieved in the group receiving tacrolimus 0.1 μg/mL every third day, and the highest expression of osteocalcin was achieved in the group receiving 1 μg/mL every third day. Biodegradable poly(lactic-co-glycolic acid)-based microspheres loaded with tacrolimus promoted mineralization. Microspheres loaded with tacrolimus may be applied for increased osteoblastic differentiation.

Hybrid Congregation of Islet Single Cells and Curcumin-Loaded Polymeric Microspheres as an Interventional Strategy to Overcome Apoptosis Associated with Pancreatic Islets Transplantation

Hypoxic or near-anoxic conditions that occur in the core of transplanted islets induce necrosis and apoptosis during the early stages after transplantation, primarily due to loss of vascularization during the isolation process. Moreover, secretion of various cytokines from pancreatic islets is detrimental to the viability of islet cells in vitro. In this study, we aimed to protect pancreatic islet cells against apoptosis by establishing a method for in situ delivery of curcumin to the pancreatic islets. Self-assembled heterospheroids composed of pancreatic islet cells and curcumin-loaded polymeric microspheres were prepared by the three-dimensional cell culture technique. Release of curcumin in the microenvironment of pancreatic islets promoted survival of the islets. In hypoxic culture conditions, which mimic the in vivo conditions after transplantation, viability of the islets was significantly improved, as indicated by a decreased expression of pro-apoptotic protein and an increased expression of anti-apoptotic protein. Additionally, oxidative stress-induced cell death was suppressed. Thus, unlike co-transplantation of pancreatic islets and free microspheres, which provided a wide distribution of microspheres throughout the transplanted area, the heterospheroid transplantation resulted in colocalization of pancreatic islet cells and microspheres, thereby exerting beneficial effects on the cells.

Drug-nanoencapsulated PLGA microspheres prepared by emulsion electrospray with controlled release behavior

The development of modern therapeutics has raised the requirement for controlled drug delivery system which is able to efficiently encapsulate bioactive agents and achieve their release at a desired rate satisfying the need of the practical system. In this study, two kind of aqueous model drugs with different molecule weight, Congo red and albumin from bovine serum (BSA) were nano-encapsulated in poly (dl-lactic-co-glycolic acid) (PLGA) microspheres by emulsion electrospray. In the preparation process, the aqueous phase of drugs was added into the PLGA chloroform solution to form the emulsion solution. The emulsion was then electrosprayed to fabricate drug-nanoencapsulated PLGA microspheres. The morphology of the PLGA microspheres was affected by the volume ratio of aqueous drug phase and organic PLGA phase (Vw/Vo ) and the molecule weight of model drugs. Confocal laser scanning microcopy showed the nanodroplets of drug phase were scattered in the PLGA microspheres homogenously with different distribution patterns related to Vw/Vo . With the increase of the volume ratio of aqueous drug phase, the number of nanodroplets increased forming continuous phase gradually that could accelerate drug release rate. Moreover, BSA showed a slower release rate from PLGA microspheres comparing to Congo red, which indicated the drug release rate could be affected by not only Vw/Vo but also the molecule weight of model drug. In brief, the PLGA microspheres prepared using emulsion electrospray provided an efficient and simple system to achieve controlled drug release at a desired rate satisfying the need of the practices.