New Chelate Resins Prepared with Direct Red 23 for Cd2+, Ni2+, Cu2+ and Pb2+ Removal

In this paper, two chelate resins prepared by a simple procedure were used for the removal of Cd2+, Ni2+, Cu2+, and Pb2+ (M2+) from aqueous solutions. Amberlite IRA 402 strongly basic anion exchange resin in Cl− form (IRA 402 (Cl−) together with Amberlite XAD7HP acrylic ester co-polymer (XAD7HP) were functionalized with chelating agent Direct red 23 (DR 23). The chelate resins (IRA 402-DR 23 and XAD7HP-DR 23) were obtained in batch mode. The influence of interaction time, pH and the initial concentration of DR 23 solution was investigated using UV-Vis spectrometry. The time necessary to reach equilibrium was 90 min for both resins. A negligible effect of adsorption capacity (Qe) was obtained when the DR 23 solution was adjusted at a pH of 2 and 7.9. The Qe of the XAD7HP resin (27 mg DR 23/g) is greater than for IRA 402 (Cl−) (21 mg DR 23/g). The efficiency of chelating resins was checked via M2+ removal determined by the atomic adsorption spectrometry method (AAS). The M2+ removal by the IRA 402-DR 23 and XAD7HP-DR 23 showed that the latter is more efficient for this propose. As a consequence, for divalent ions, the chelated resins followed the selectivity sequence: Cd2+ > Cu2+ > Ni2+ > Pb2+. Additionally, Cd2+, Cu2+ and Ni2+ removal was fitted very well with the Freundlich model in terms of height correlation coefficient (R2), while Pb2+ was best fitted with Langmuir model for IRA 402-DR 23, the Cu2+ removal is described by the Langmuir model, and Cd2+, Ni2+ and Pb2+ removal was found to be in concordance with the Freundlich model for XAD7HP-DR 23. The M2+ elution from the chelate resins was carried out using 2 M HCl. The greater M2+ recovery from chelating resins mass confirmed their sustainability. The chelate resins used before and after M2+ removal by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) analysis were evaluated.

Kinetics Study of Solvent and Solid-Phase Extraction of Rare Earth Metals with Di-2-Ethylhexylphosphoric Acid

The kinetic features of solvent and solid-phase extraction of yttrium and iron (III) from simulated and industrial phosphoric acid solutions are revealed. Di-2-ethylhexylphosphoric acid (D2EHPA) was used as a liquid extractant, and D2EHPA-containing Levextrel resin—a co-polymerization product of styrene and divinylbenzene in the presence of D2EHPA—was used as a solid-phase extraction agent. Significant dependence of yttrium extraction rate constant on the stirring rate was revealed using the formal first-order kinetic equation. The data obtained characterizes a diffusion-limited process with an activation energy of 16.2 ± 1.3 kJ/mol. Temperature increase during the iron (III) extraction process leads to a changeover of a rate-limiting stage from kinetic to diffusion, accompanied by drop of activation energy from 40.0 ± 1.4 to 11.4 ± 1.2 kJ/mol. Effective separation of elements at the extraction stage is possible at temperatures of 283–300 K under non-equilibrium conditions of the ferric ions transport from aqueous to organic phase. This condition ensures a high yttrium–iron separation coefficient of 23.2 in 1.5–2 min. Extraction kinetics by Levextrel resin are described by Fick’s second law equation, which establishes the laws of diffusion in the solid grain of the organic phase with an activation energy of 18.5 ± 2.0 kJ/mol.

Separation and Recovery of Scandium from Sulfate Media by Solvent Extraction and Polymer Inclusion Membranes with Amic Acid Extractants

We report on the separation and recovery of scandium(III) from sulfate solutions using solvent extraction and a membrane transport system utilizing newly synthesized amic acid extractants. Scandium(III) was quantitatively extracted with 50 mmol dm-3 N-[N,N-di(2-ethylhexyl)aminocarbonylmethyl]glycine (D2EHAG) or N-[N,N-di(2-ethylhexyl)aminocarbonylmethyl]phenylalanine (D2EHAF) in n-dodecane at pH 2 and easily stripped using a 0.5 mol dm-3 sulfuric acid solution. The extraction mechanisms of scandium(III) extraction with D2EHAG and D2EHAF were examined, and it was established that scandium(III) formed a 1:3 complex with both extractants (HR), that is, Sc(SO4)2 - aq + 1.5(HR)2org ⇄ Sc(SO4)R(HR)2org + H+ aq + SO4 2- aq. The equilibrium constants of extraction were evaluated to be 4.87 and 9.99 (mol dm-3)0.5 for D2EHAG and D2EHAF, respectively. D2EHAG and D2EHAF preferentially extracted scandium(III) with a high selectivity compared to common transition metal ions under high acidic conditions (0 < pH ≤ 3). In addition, scandium(III) was quantitatively transported from a feed solution into a 0.5 mol dm-3 sulfuric acid receiving solution through a polymer inclusion membrane (PIM) containing D2EHAF as a carrier. Scandium(III) was completely separated thermodynamically from nickel(II), aluminum(III), cobalt(II), manganese(II), chromium(III), calcium(II), and magnesium(II), and partially separated from iron(III) kinetically using a PIM containing D2EHAF as a carrier. The initial flux value for scandium(III) (J 0,Sc = 1.9 × 10-7 mol m-2 s-1) was two times higher than that of iron(III) (J 0,Fe = 9.3 × 10-8 mol m-2 s-1).