Kinetic mechanism of nick sealing by T4 RNA ligase 2 and effects of 3'-OH base mispairs and damaged base lesions

Enzymatic synthesis of RNA standards for mapping and quantifying RNA modifications in sequencing analysis

Synthesis of RNA standards that contain an internal site-specific modification is important for mapping and quantification of the modified nucleotide in sequencing analysis. While RNA containing a site-specific modification can be readily synthesized by solid-state coupling for less than 100-mer nucleotides, longer RNA must be synthesized by enzymatic ligation in the presence of a DNA splint. However, long RNAs have structural heterogeneity, and those generated by in vitro transcription have 3'-end sequence heterogeneity, which together substantially reduce the yield of ligation. Here we describe a method of 3-part splint ligation that joins an in vitro transcribed left-arm RNA, an in vitro transcribed right-arm RNA, and a chemically synthesized modification-containing middle RNA, with an efficiency higher than previously reported. We report that the improved efficiency is largely attributed to the inclusion of a pair of DNA disruptors proximal to the ligation sites, and to a lesser extent to the homogeneous processing of the 3'-end of the left-arm RNA. The yields of the ligated long RNA are sufficiently high to afford purification to homogeneity for practical RNA research. We also verify the sequence accuracy at each ligation junction by nanopore sequencing.

Preferential production of RNA rings by T4 RNA ligase 2 without any splint through rational design of precursor strand

Rings of single-stranded RNA are promising for many practical applications, but the methods to prepare them in preparative scale have never been established. Previously, RNA circularization was achieved by T4 RNA ligase 2 (Rnl2, a dsRNA ligase) using splints, but the yield was low due to concurrent intermolecular polymerization. Here, various functional RNAs (siRNA, miRNA, ribozyme, etc.) are dominantly converted by Rnl2 to the rings without significant limitations in sizes and sequences. The key is to design a precursor RNA, which is highly activated for the efficient circularization without any splint. First, secondary structure of target RNA ring is simulated by Mfold, and then hypothetically cut at one site so that a few intramolecular base pairs are formed at the terminal. Simply by treating this RNA with Rnl2, the target ring was selectively and efficiently produced. Unexpectedly, circular RNA can be obtained in high yield (>90%), even when only 2 bp form in the 3'-OH side and no full match base pair forms in the 5'-phosphate side. Formation of polymeric by-products was further suppressed by diluting conventional Rnl2 buffer to abnormally low concentrations. Even at high-RNA concentrations (e.g. 50 μM), enormously high selectivity (>95%) was accomplished.

RNA ligation of very small pseudo nick structures by T4 RNA ligase 2, leading to efficient production of versatile RNA rings

T4 RNA ligase 2 catalyses two types of reactions: (i) sealing of a nick structure in double-stranded RNA and (ii) connection of two single-stranded RNA strands. In order to obtain comprehensive views on these two types of reactions and widen the application scope of this RNA ligase, we here systematically analysed the connection of single-stranded RNA strands having different secondary structures. It has been found that the ligation is enormously promoted when a stem of only 4-bp or longer is formed in the 3′-OH side of the joining site. Additional placement of a stem in the 5′-phosphate side further facilitates the ligation. In contrast, perturbation of the stem structures in RNA substrates suppresses the ligation. These results indicate that ligation of two single-stranded RNA strands by T4 RNA ligase 2 is greatly promoted by forming a “nick-like intermediate”. Even the unstable intermediate, formed only temporarily in the solution, is sufficiently effective. By designing the synthetic systems in terms of this finding, short single-stranded RNA rings of versatile sizes, which are otherwise hard to be obtained, are efficiently prepared in high selectivity and yield.

T4 Rnl2 ligates ssRNA via nick-like structures, leading to efficient production of versatile RNA rings for various applications.

Chemo-Enzymatic Synthesis of Position-Specifically Modified RNA for Biophysical Studies including Light Control and NMR Spectroscopy

The investigation of non-coding RNAs requires RNAs containing modifications at every possible position within the oligonucleotide. Here, we present the chemo-enzymatic RNA synthesis containing photoactivatable or ¹³ C,¹⁵ N-labelled nucleosides. All four ribonucleotides containing ortho-nitrophenylethyl (NPE) photocages, photoswitchable azobenzene C-nucleotides and ¹³ C,¹⁵ N-labelled nucleotides were incorporated position-specifically in high yields. We applied this approach for the synthesis of light-inducible 2'dG-sensing riboswitch variants and detected ligand-induced structural reorganization upon irradiation by NMR spectroscopy. This chemo-enzymatic method opens the possibility to incorporate a wide range of modifications at any desired position of RNAs of any lengths beyond the limits of solid-phase synthesis.

Fidelity of RNA templated end-joining by chlorella virus DNA ligase and a novel iLock assay with improved direct RNA detection accuracy

Ligation-based nucleic acid detection methods are primarily limited to DNA, since they exhibit poor performance on RNA. This is attributed to reduced end-joining efficiency and/or fidelity of ligases. Interestingly, chlorella virus DNA ligase (PBCV-1 DNA ligase) has recently been shown to possess high RNA-templated DNA end-joining activity; however, its fidelity has not yet been systematically evaluated. Herein, we characterized PBCV-1 ligase for its RNA-templated end-joining fidelity at single base mismatches in 3′ and 5′ DNA probe termini and found an overall limited end-joining fidelity. To improve the specificity in PBCV-1 ligase-driven RNA detection assays, we utilized structure-specific 5′ exonucleolytic activity of Thermus aquaticus DNA polymerase, used in the invader assay. In the iLock (invader padLock) probe assay, padlock probe molecules are activated prior ligation thus the base at the probe ligation junction is read twice in order to aid successful DNA ligation: first, during structure-specific invader cleavage and then during sequence-specific DNA ligation. We report two distinct iLock probe activation mechanisms and systematically evaluate the assay specificity, including single nucleotide polymorphisms on RNA, mRNA and miRNA. We show significant increase in PBCV-1 ligation fidelity in the iLock probe assay configuration for RNA detection.

YAMAT-seq: an efficient method for high-throughput sequencing of mature transfer RNAs

Besides translation, transfer RNAs (tRNAs) play many non-canonical roles in various biological pathways and exhibit highly variable expression profiles. To unravel the emerging complexities of tRNA biology and molecular mechanisms underlying them, an efficient tRNA sequencing method is required. However, the rigid structure of tRNA has been presenting a challenge to the development of such methods. We report the development of Y-shaped Adapter-ligated MAture TRNA sequencing (YAMAT-seq), an efficient and convenient method for high-throughput sequencing of mature tRNAs. YAMAT-seq circumvents the issue of inefficient adapter ligation, a characteristic of conventional RNA sequencing methods for mature tRNAs, by employing the efficient and specific ligation of Y-shaped adapter to mature tRNAs using T4 RNA Ligase 2. Subsequent cDNA amplification and next-generation sequencing successfully yield numerous mature tRNA sequences. YAMAT-seq has high specificity for mature tRNAs and high sensitivity to detect most isoacceptors from minute amount of total RNA. Moreover, YAMAT-seq shows quantitative capability to estimate expression levels of mature tRNAs, and has high reproducibility and broad applicability for various cell lines. YAMAT-seq thus provides high-throughput technique for identifying tRNA profiles and their regulations in various transcriptomes, which could play important regulatory roles in translation and other biological processes.

Kinetic aspects of enzyme-mediated repair of DNA single-strand breaks

In cells and bacteria, DNA can be damaged in different ways. The efficient damage repair, mediated by various enzymes, is crucial for their survival. Most frequently, the damage is reduced to single-strand breaks. In human cells, according to the experiments, the repair of such breaks can mechanistically be divided into four steps including (i) the break detection, (ii) processing of damaged ends, (iii) gap filling, and (iv) ligation of unbound ends of the broken strand. The first and second steps run in parallel while the third and fourth steps are sequential. The author proposes a kinetic model describing these steps. It allows one to understand the likely dependence of the number of breaks in different states on enzyme concentrations. The dependence of these concentrations on the rate of the formation of breaks can be understood as well. In addition, the likely role of unzipping and zipping of the fragments of broken ends of the strand in the ligation step has been scrutinized taking the specifics of binding of DNA stands into account.

Kinetic mechanism and fidelity of nick sealing by Escherichia coli NAD+-dependent DNA ligase (LigA)

Escherichia coli DNA ligase (EcoLigA) repairs 3′-OH/5′-PO₄ nicks in duplex DNA via reaction of LigA with NAD⁺ to form a covalent LigA-(lysyl-Nζ)–AMP intermediate (step 1); transfer of AMP to the nick 5′-PO₄ to form an AppDNA intermediate (step 2); and attack of the nick 3′-OH on AppDNA to form a 3′-5′ phosphodiester (step 3). A distinctive feature of EcoLigA is its stimulation by ammonium ion. Here we used rapid mix-quench methods to analyze the kinetic mechanism of single-turnover nick sealing by EcoLigA–AMP. For substrates with correctly base-paired 3′-OH/5′-PO₄ nicks, k_step2 was fast (6.8–27 s⁻¹) and similar to k_step3 (8.3–42 s⁻¹). Absent ammonium, k_step2 and k_step3 were 48-fold and 16-fold slower, respectively. EcoLigA was exquisitely sensitive to 3′-OH base mispairs and 3′ N:abasic lesions, which elicited 1000- to >20000-fold decrements in k_step2. The exception was the non-canonical 3′ A:oxoG configuration, which EcoLigA accepted as correctly paired for rapid sealing. These results underscore: (i) how EcoLigA requires proper positioning of the nick 3′ nucleoside for catalysis of 5′ adenylylation; and (ii) EcoLigA's potential to embed mutations during the repair of oxidative damage. EcoLigA was relatively tolerant of 5′-phosphate base mispairs and 5′ N:abasic lesions.

Characterization of a novel eukaryal nick-sealing RNA ligase from Naegleria gruberi

The proteome of the amoebo-flagellate protozoan Naegleria gruberi is rich in candidate RNA repair enzymes, including 15 putative RNA ligases, one of which, NgrRnl, is a eukaryal homolog of Deinococcus radiodurans RNA ligase, DraRnl. Here we report that purified recombinant NgrRnl seals nicked 3'-OH/5'-PO4 duplexes in which the 3'-OH strand is RNA. It does so via the "classic" ligase pathway, entailing reaction with ATP to form a covalent NgrRnl-AMP intermediate, transfer of AMP to the nick 5'-PO4, and attack of the RNA 3'-OH on the adenylylated nick to form a 3'-5' phosphodiester. Unlike members of the four known families of ATP-dependent RNA ligases, NgrRnl lacks a carboxy-terminal appendage to its nucleotidyltransferase domain. Instead, it contains a defining amino-terminal domain that we show is important for 3'-OH/5'-PO4 nick-sealing and ligase adenylylation, but dispensable for phosphodiester synthesis at a preadenylylated nick. We propose that NgrRnl, DraRnl, and their homologs from diverse bacteria, viruses, and unicellular eukarya comprise a new "Rnl5 family" of nick-sealing ligases with a signature domain organization.

Assessing long-distance RNA sequence connectivity via RNA-templated DNA-DNA ligation

Many RNAs, including pre-mRNAs and long non-coding RNAs, can be thousands of nucleotides long and undergo complex post-transcriptional processing. Multiple sites of alternative splicing within a single gene exponentially increase the number of possible spliced isoforms, with most human genes currently estimated to express at least ten. To understand the mechanisms underlying these complex isoform expression patterns, methods are needed that faithfully maintain long-range exon connectivity information in individual RNA molecules. In this study, we describe SeqZip, a methodology that uses RNA-templated DNA–DNA ligation to retain and compress connectivity between distant sequences within single RNA molecules. Using this assay, we test proposed coordination between distant sites of alternative exon utilization in mouse Fn1, and we characterize the extraordinary exon diversity of Drosophila melanogaster Dscam1.

DOI:http://dx.doi.org/10.7554/eLife.03700.001

A flow chart can show how an outcome can be achieved from a particular start point by breaking down an activity into a list of possible steps. Often, a flow chart contains several alternative steps, not all of which are taken every time the flow chart is used. The same can be said of genes, which are biological instructions that often contain many options within their DNA sequences.

Proteins—which perform many roles in cells—are built following the instructions contained in genes. First, the DNA sequence of the gene is copied. This produces a molecule of ribonucleic acid (RNA), which is able to move around the cell to find the machinery that can use the genetic information to make a protein. Genes and their RNA copies contain instructions with more steps—called exons—than are necessary to make a working protein, so extra exons are removed (‘spliced’) from the RNA copies. Different combinations of exons can be removed, so splicing can make different versions of the RNA called isoforms. These allow a single gene to build many different proteins. In fruit flies, for example, the different exons of the gene Dscam1 can be spliced into one of 38,016 unique RNA isoforms.

Current technology only allows researchers to deduce the sequence of RNA molecules by combining sequences recorded from short fragments of the molecule. However, before splicing, RNA molecules tend to be much longer than this, so this restricts our understanding of the RNA isoforms found in cells. Here, Roy et al. devised and tested a new method called SeqZip to solve this problem.

SeqZip uses short fragments of DNA called ligamers that can only stick to the sections of RNA that will remain after the molecule has been spliced. After splicing, the ligamers can be stuck together to make a DNA replica of the spliced RNA. The end product is at least 49 times shorter than the original RNA, so it is easier to sequence. In addition, the combinations of the ligamers in the DNA replica show which exons of a specific gene are kept and which ones are spliced out.

To test the method, Roy et al. studied a mouse gene that has six RNA isoforms. SeqZip reduced the length of the RNA by five times and made it possible to measure how frequently the different isoforms naturally arise. Roy et al. also used SeqZip to work out which isoforms of the Dscam1 gene are used at different stages in the life of fruit fly larvae. SeqZip can provide insights into how complex organisms like flies, mice, and humans have evolved with relatively few—a little over 20,000—genes in their genomes.

DOI:http://dx.doi.org/10.7554/eLife.03700.002

Effects of 3'-OH and 5'-PO4 base mispairs and damaged base lesions on the fidelity of nick sealing by Deinococcus radiodurans RNA ligase

Deinococcus radiodurans RNA ligase (DraRnl) is the founding member of a family of end-joining enzymes encoded by diverse microbes and viruses. DraRnl ligates 3'-OH, 5'-PO4 nicks in double-stranded nucleic acids in which the nick 3'-OH end is RNA. Here we gauge the effects of 3'-OH and 5'-PO4 base mispairs and damaged base lesions on the rate of nick sealing. DraRnl is indifferent to the identity of the 3'-OH nucleobase, provided that it is correctly paired. With 3'-OH mispairs, the DraRnl sealing rate varies widely, with G-T and A-C mispairs being the best substrates and G-G, G-A, and A-A mispairs being the worst. DraRnl accepts 3' A-8-oxoguanine (oxoG) to be correctly paired, while it discriminates against U-oxoG and G-oxoG mispairs. DraRnl displays high activity and low fidelity in sealing 3'-OH ends opposite an 8-oxoadenine lesion. It prefers 3'-OH adenosine when sealing opposite an abasic template site. With 5'-PO4 mispairs, DraRnl seals a 5' T-G mispair as well as it does a 5' C-G pair; in most other respects, the ligation fidelity at 5' mispairs is similar to that at 3' mispairs. DraRnl accepts a 5' A-oxoG end to be correctly paired, yet it is more tolerant of 5' T-oxoG and 5' G-oxoG mispairs than the equivalent configurations on the 3' side of the nick. At 5' nucleobase-abasic site nicks, DraRnl prefers to ligate when the nucleobase is a purine. The biochemical properties of DraRnl are compatible with its participation in the templated repair of RNA damage or in the sealing of filled DNA gaps that have a 3' ribopatch.