Fast formation of the P3-P7 pseudoknot: a strategy for efficient folding of the catalytically active ribozyme

Watching ion-driven kinetics of ribozyme folding and misfolding caused by energetic and topological frustration one molecule at a time

Folding of ribozymes into well-defined tertiary structures usually requires divalent cations. How Mg2+ ions direct the folding kinetics has been a long-standing unsolved problem because experiments cannot detect the positions and dynamics of ions. To address this problem, we used molecular simulations to dissect the folding kinetics of the Azoarcus ribozyme by monitoring the path each molecule takes to reach the folded state. We quantitatively establish that Mg2+ binding to specific sites, coupled with counter-ion release of monovalent cations, stimulate the formation of secondary and tertiary structures, leading to diverse pathways that include direct rapid folding and trapping in misfolded structures. In some molecules, key tertiary structural elements form when Mg2+ ions bind to specific RNA sites at the earliest stages of the folding, leading to specific collapse and rapid folding. In others, the formation of non-native base pairs, whose rearrangement is needed to reach the folded state, is the rate-limiting step. Escape from energetic traps, driven by thermal fluctuations, occurs readily. In contrast, the transition to the native state from long-lived topologically trapped native-like metastable states is extremely slow. Specific collapse and formation of energetically or topologically frustrated states occur early in the assembly process.

RNA catalysis as a probe for chaperone activity of DEAD-box helicases

DEAD-box proteins are vitally important to cellular processes and make up the largest class of helicases. Many DEAD-box proteins function as RNA chaperones by accelerating structural transitions of RNA, which can result in the resolution of misfolded conformers or conversion between functional structures. While the biological importance of chaperone proteins is clear, their mechanisms are incompletely understood. Here, we illustrate how the catalytic activity of certain RNAs can be used to measure RNA chaperone activity. By measuring the amount of substrate converted to product, the fraction of catalytically active molecules is measured over time, providing a quantitative measure of the formation or loss of native RNA. The assays are described with references to group I and group II introns and their ribozyme derivatives, and examples are included that illustrate potential complications and indicate how catalytic activity measurements can be combined with physical approaches to gain insights into the mechanisms of DEAD-box proteins as RNA chaperones.

The Azoarcus group I intron ribozyme misfolds and is accelerated for refolding by ATP-dependent RNA chaperone proteins

Structured RNAs traverse complex energy landscapes that include valleys representing misfolded intermediates. In Neurospora crassa and Saccharomyces cerevisiae, efficient splicing of mitochondrial group I and II introns requires the DEAD box proteins CYT-19 and Mss116p, respectively, which promote folding transitions and function as general RNA chaperones. To test the generality of RNA misfolding and the activities of DEAD box proteins in vitro, here we measure native folding of a small group I intron ribozyme from the bacterium Azoarcus by monitoring its catalytic activity. To develop this assay, we first measure cleavage of an oligonucleotide substrate by the prefolded ribozyme. Substrate cleavage is rate-limited by binding and is readily reversible, with an internal equilibrium near unity, such that the amount of product observed is less than the amount of native ribozyme. We use this assay to show that approximately half of the ribozyme folds readily to the native state, whereas the other half forms an intermediate that transitions slowly to the native state. This folding transition is accelerated by urea and increased temperature and slowed by increased Mg(2+) concentration, suggesting that the intermediate is misfolded and must undergo transient unfolding during refolding to the native state. CYT-19 and Mss116p accelerate refolding in an ATP-dependent manner, presumably by disrupting structure in the intermediate. These results highlight the tendency of RNAs to misfold, underscore the roles of CYT-19 and Mss116p as general RNA chaperones, and identify a refolding transition for further dissection of the roles of DEAD box proteins in RNA folding.

A maturase that specifically stabilizes and activates its cognate group I intron at high temperatures

Folding of large structured RNAs into their functional tertiary structures at high temperatures is challenging. Here we show that I-TnaI protein, a small LAGLIDADG homing endonuclease encoded by a group I intron from a hyperthermophilic bacterium, acts as a maturase that is essential for the catalytic activity of this intron at high temperatures and physiological cationic conditions. I-TnaI specifically binds to and induces tertiary packing of the P4-P6 domain of the intron; this RNA-protein complex might serve as a thermostable platform for active folding of the entire intron. Interestingly, the binding affinity of I-TnaI to its cognate intron RNA largely increases with temperature; over 30-fold stronger binding at higher temperatures relative to 37 °C correlates with a switch from an entropy-driven (37 °C) to an enthalpy-driven (55-60 °C) interaction mode. This binding mode may represent a novel strategy how an RNA binding protein can promote the function of its target RNA specifically at high temperatures.

Slow formation of a pseudoknot structure is rate limiting in the productive co-transcriptional folding of the self-splicing Candida intron

Pseudoknots play critical roles in packing the active structure of various functional RNAs. The importance of the P3-P7 pseudoknot in refolding of group I intron ribozymes has been recently appreciated, while little is known about the pseudoknot function in co-transcriptional folding. Here we used the Candida group I intron as a model to address the question. We show that co-transcriptional folding of the active self-splicing intron is twice as fast as refolding. The P3-P7 pseudoknot folds slowly during co-transcriptional folding at a rate constant similar to the folding of the active ribozyme, and folding of both P3-P7 and P1-P10 pseudoknots are inhibited by antisense oligonucleotides. We conclude that when RNA folding is coupled with transcription, formation of pseudoknot structures dominates the productive folding pathway and serves as a rate-limiting step in producing the self-splicing competent Candida intron.

Antisense oligonucleotides effectively inhibit the co-transcriptional splicing of a Candida group I intron in vitro and in vivo: Implications for antifungal therapeutics

Self-splicing of group I intron from the 26S rRNA of Candida albicans is essential for maturation of the host RNA. Here, we demonstrated that the co-transcriptional splicing of the intron in vitro was blocked by antisense oligonucleotides (AONs) targeting the P3-P7 core of the intron. The core-targeted AON effectively and specifically inhibited the intron splicing from its host RNA in living C. albicans. Furthermore, flow cytometry experiments showed that the growth inhibition was caused by a fungicidal effect. For the first time, we showed that an AON targeting the ribozyme core folding specifically inhibits the endogenous ribozyme splicing in living cells and specifically kills the intron-containing fungal strains, which sheds light on the development of antifungal drugs in the future.

Structural rearrangements linked to global folding pathways of the Azoarcus group I ribozyme

Stable RNAs must fold into specific three-dimensional structures to be biologically active, yet many RNAs form metastable structures that compete with the native state. Our previous time-resolved footprinting experiments showed that Azoarcus group I ribozyme forms its tertiary structure rapidly (tau < 30 ms) without becoming significantly trapped in kinetic intermediates. Here, we use stopped-flow fluorescence spectroscopy to probe the global folding kinetics of a ribozyme containing 2-aminopurine in the loop of P9. The modified ribozyme was catalytically active and exhibited two equilibrium folding transitions centered at 0.3 and 1.6 mM Mg2+, consistent with previous results. Stopped-flow fluorescence revealed four kinetic folding transitions with observed rate constants of 100, 34, 1, and 0.1 s-1 at 37 degrees C. From comparison with time-resolved Fe(II)-ethylenediaminetetraacetic acid footprinting of the modified ribozyme under the same conditions, these folding transitions were assigned to formation of the IC intermediate, tertiary folding and docking of the nicked P9 tetraloop, reorganization of the P3 pseudoknot, and refolding of nonnative conformers, respectively. The footprinting results show that 50-60% of the modified ribozyme folds in less than 30 ms, while the rest of the RNA population undergoes slow structural rearrangements that control the global folding rate. The results show how small perturbations to the structure of the RNA, such as a nick in P9, populate kinetic folding intermediates that are not observed in the natural ribozyme.

A phage RNA-binding protein binds to a non-cognate structured RNA and stabilizes its core structure

Recent studies suggest that some RNA-binding proteins facilitate the folding of non-cognate RNAs. Here, we report that bacteriophage MS2 coat protein (MS2 CP) bound and promoted the catalytic activity of Candida group I ribozyme. Cloning of the MS2-bound RNA segments showed that this protein primarily interacts with the P5ab-P5 structure. Ultraviolet cross-linking and the T1 footprinting assay further showed that MS2 binding stabilized tertiary interactions, including the conserved L9-P5 interaction, and led to a more compact core structure. This mechanism is similar to that of the yeast mitochondrial tyrosyl-tRNA synthetase on other group I introns, suggesting that different RNA-binding proteins may use common mechanisms to support RNA structures.

Coordination of two sequential ester-transfer reactions: exogenous guanosine binding promotes the subsequent omegaG binding to a group I intron

Self-splicing of group I introns is accomplished by two sequential ester-transfer reactions mediated by sequential binding of two different guanosine ligands, but it is yet unclear how the binding is coordinated at a single G-binding site. Using a three-piece trans-splicing system derived from the Candida intron, we studied the effect of the prior GTP binding on the later ωG binding by assaying the ribozyme activity in the second reaction. We showed that adding GTP simultaneously with and prior to the esterified ωG in a substrate strongly accelerated the second reaction, suggesting that the early binding of GTP facilitates the subsequent binding of ωG. GTP-mediated facilitation requires C2 amino and C6 carbonyl groups on the Watson–Crick edge of the base but not the phosphate or sugar groups, suggesting that the base triple interactions between GTP and the binding site are important for the subsequent ωG binding. Strikingly, GTP binding loosens a few local structures of the ribozyme including that adjacent to the base triple, providing structural basis for a rapid exchange of ωG for bound GTP.

Splicing and evolution of an unusually small group I intron

Introns are common in the rRNA gene loci of fungal genomes, but biochemical studies to investigate splicing are rare. Here, self-splicing of a very small (67 nucleotide) group I intron is demonstrated. The PaSSU intron (located within the rRNA small subunit gene of Phialophora americana) splices in vitro under group I intron conditions. Most group I ribozymes contain pairing regions P1-P10, with a conserved G.U pair at the 5' splice site, and a G at the 3' intron border. The PaSSU intron contains only P1, P7, and P10. While it contains the G.U pair at the 5' splice, a U is found at the 3' end of the intron instead of a G. Phylogenetic analysis places it within subgroup IC1, whose members are found in the nuclear rRNA genes of fungi. The structural elements are similar to those in the centermost regions of other group I introns. Its size can be explained by a single large deletion that removed P2 through much of P9. Part of the original P9 region has assumed the function of P7. Its small size and genealogy makes it an excellent model to study RNA catalysis and evolution.

Tertiary interactions determine the accuracy of RNA folding

RNAs must fold into unique three-dimensional structures to function in the cell, but how each polynucleotide finds its native structure is not understood. To investigate whether the stability of the tertiary structure determines the speed and accuracy of RNA folding, docking of a tetraloop with its receptor in a bacterial group I ribozyme was perturbed by site-directed mutagenesis. Disruption of the tetraloop or its receptor destabilizes tertiary interactions throughout the ribozyme by 2-3 kcal/mol, demonstrating that tertiary interactions form cooperatively in the transition from a native-like intermediate to the native state. Nondenaturing PAGE and RNase T1 digestion showed that base pairs form less homogeneously in the mutant RNAs during the transition from the unfolded state to the intermediate. Thus, tertiary interactions between helices bias the ensemble of secondary structures toward native-like conformations. Time-resolved hydroxyl radical footprinting showed that the wild-type ribozyme folds completely within 5-20 ms. By contrast, only 40-60% of a tetraloop mutant ribozyme folds in 30-40 ms, with the remainder folding in 30-200 s via nonnative intermediates. Therefore, destabilization of tetraloop-receptor docking introduces an alternate folding pathway in the otherwise smooth energy landscape of the wild-type ribozyme. Our results show that stable tertiary structure increases the flux through folding pathways that lead directly and rapidly to the native structure.

Monovalent cations use multiple mechanisms to resolve ribozyme misfolding

Recent efforts have been made to unravel the independent roles of monovalent cations in RNA folding, primarily using the Tetrahymena ribozyme as a model. Here we report how monovalent cations impact the folding of the Candida ribozyme. Interestingly, this ribozyme requires an order of magnitude less monovalent cations (Na+ and Tris+) to commit to a new folding starting state in which the J3/4:P6 base triple is partially formed and mispairing in the L2.1 and L6 terminal loops is resolved. When Mg2+-induced ribozyme folding proceeded on the same energy landscape, the altered starting state led to a rapid assembly of the correct ribozyme core and a fivefold to 10-fold increase in the ribozyme activity. Moreover, when the ribozyme folding was started from a misfolding-prone state, high millimolar concentrations of monovalent cations moderately elevated the ribozyme activity by efficiently resolving the misfolding of a peripheral element, P5abc.

RNA tertiary interactions mediate native collapse of a bacterial group I ribozyme

Large RNAs collapse into compact intermediates in the presence of counterions before folding to the native state. We previously found that collapse of a bacterial group I ribozyme correlates with the formation of helices within the ribozyme core, but occurs at Mg2+ concentrations too low to support stable tertiary structure and catalytic activity. Here, using small-angle X-ray scattering, we show that Mg2+-induced collapse is a cooperative folding transition that can be fit by a two-state model. The Mg2+ dependence of collapse is similar to the Mg2+ dependence of helix assembly measured by partial ribonuclease T1 digestion and of an unfolding transition measured by UV hypochromicity. The correspondence between multiple probes of RNA structure further supports a two-state model. A mutation that disrupts tertiary contacts between the L9 tetraloop and its helical receptor destabilized the compact state by 0.8 kcal/mol, while mutations in the central triplex were less destabilizing. These results show that native tertiary interactions stabilize the compact folding intermediates under conditions in which the RNA backbone remains accessible to solvent.

A peripheral element assembles the compact core structure essential for group I intron self-splicing

The presence of non-conserved peripheral elements in all naturally occurring group I introns underline their importance in ensuring the natural intron function. Recently, we reported that some peripheral elements are conserved in group I introns of IE subgroup. Using self-splicing activity as a readout, our initial screening revealed that one such conserved peripheral elements, P2.1, is mainly required to fold the catalytically active structure of the Candida ribozyme, an IE intron. Unexpectedly, the essential function of P2.1 resides in a sequence-conserved short stem of P2.1 but not in a long-range interaction associated with the loop of P2.1 that stabilizes the ribozyme structure. The P2.1 stem is indispensable in folding the compact ribozyme core, most probably by forming a triple helical interaction with two core helices, P3 and P6. Surprisingly, although the ribozyme lacking the P2.1 stem renders a loosely folded core and the loss of self-splicing activity requires two consecutive transesterifications, the mutant ribozyme efficiently catalyzes the first transesterification reaction. These results suggest that the intron self-splicing demands much more ordered structure than does one independent transesterification, highlighting that the universally present peripheral elements achieve their functional importance by enabling the highly ordered structure through diverse tertiary interactions.

Predicting the secondary structures and tertiary interactions of 211 group I introns in IE subgroup

The large number of currently available group I intron sequences in the public databases provides opportunity for studying this large family of structurally complex catalytic RNA by large-scale comparative sequence analysis. In this study, the detailed secondary structures of 211 group I introns in the IE subgroup were manually predicted. The secondary structure-favored alignments showed that IE introns contain 14 conserved stems. The P13 stem formed by long-range base-pairing between P2.1 and P9.1 is conserved among IE introns. Sequence variations in the conserved core divide IE introns into three distinct minor subgroups, namely IE1, IE2 and IE3. Co-variation of the peripheral structural motifs with core sequences supports that the peripheral elements function in assisting the core structure folding. Interestingly, host-specific structural motifs were found in IE2 introns inserted at S516 position. Competitive base-pairing is found to be conserved at the junctions of all long-range paired regions, suggesting a possible mechanism of establishing long-range base-pairing during large RNA folding. These findings extend our knowledge of IE introns, indicating that comparative analysis can be a very good complement for deepening our understanding of RNA structure and function in the genomic era.