In-vitro culture with a tilting device in chemically defined media during meiotic maturation and early development improves the quality of blastocysts derived from in-vitro matured and fertilized porcine oocytes

Review of the Current Research on Fetal Bovine Serum and the Development of Cultured Meat

The purpose of this review is to summarize studies that investigate blood and the main components of fetal bovine serum (FBS) in vertebrates, including major livestock, and review the current research on commercializing cultured meat. Detailed research on FBS is still lacking; however, some studies have shown that FBS consists of proteins, carbohydrates, growth factors, cytokines, fats, vitamins, minerals, hormones, non-protein nitrogen, and inorganic compounds. However, there are few studies on how the composition of FBS differs from blood or serum composition in adult animals, which is probably one of the main reasons for not successfully replacing FBS. Moreover, recent studies on the development of FBS replacers and serum-free media have shown that it is difficult to conclude whether FBS has been completely replaced or serum-free media have been developed successfully. Our review of the industrialization of cultured meat reveals that many basic studies on the development of cultured meat have been conducted, but it is assumed that the study to reduce or replace ingredients derived from fetuses such as FBS has not yet been actively developed. Therefore, developing inexpensive and edible media is necessary for the successful industrialization of cultured meat.

The Calcium-Sensing Receptor Is Involved in Follicle-Stimulating Hormone-Induced Cumulus Expansion in in vitro Cultured Porcine Cumulus-Oocyte Complexes

The Calcium-Sensing Receptor (CASR) is a G protein-coupled receptor of the C family that reportedly promotes maturation of porcine oocytes. However, its role in cumulus expansion of cumulus-oocyte complexes (COCs) is not well known. This study was conducted to determine the role of CASR and potential mechanisms involved during in vitro maturation (IVM) of porcine COCs. After culture of COCs in follicle-stimulating hormone (FSH)-supplement maturation medium for 24 h, the time of breakdown of the germinal vesicle (GVBD), indicative of initiation of meiotic maturation, resulted in an increased (p < 0.05) CASR mRNA expression level in cumulus cells. Moreover, IVM of COCs in 10 μM of the CASR agonist NPS R-568 promoted (p < 0.05) cumulus expansion but only in FSH-containing medium. Conversely, 20 μM of the CASR inhibitor NPS2390 precluded cumulus expansion. We next tested the effect of the CASR agonist/inhibitor on the expression of cumulus expansion-related genes. The CASR agonist significantly upregulated the expression of hyaluronan acid synthase 2 (HAS2), whereas the CASR inhibitor downregulated the expression of all HAS2, prostaglandin-endoperoxide synthase 2 (PTGS2), and tumor necrosis factor a-induced protein 6 (TNFAIP6). Altogether, these results suggest that CASR activity is involved in FSH-stimulated porcine cumulus expansion.

Recent Advances on the Model, Measurement Technique, and Application of Single Cell Mechanics

Since the cell was discovered by humans, it has been an important research subject for researchers. The mechanical response of cells to external stimuli and the biomechanical response inside cells are of great significance for maintaining the life activities of cells. These biomechanical behaviors have wide applications in the fields of disease research and micromanipulation. In order to study the mechanical behavior of single cells, various cell mechanics models have been proposed. In addition, the measurement technologies of single cells have been greatly developed. These models, combined with experimental techniques, can effectively explain the biomechanical behavior and reaction mechanism of cells. In this review, we first introduce the basic concept and biomechanical background of cells, then summarize the research progress of internal force models and experimental techniques in the field of cell mechanics and discuss the latest mechanical models and experimental methods. We summarize the application directions of cell mechanics and put forward the future perspectives of a cell mechanics model.

Embryo's Natural Motion (enMotion): a paired randomized controlled trial evaluating a dynamic embryo culture system

OBJECTIVE

To determine if a dynamic embryo culture system affects the reproductive potential of human embryos resulting from in vitro fertilization (IVF).

DESIGN

Paired randomized controlled trial (RCT).

SETTING

IVF center.

PATIENT(S)

IVF patients with normal ovarian reserve eligible for two-embryo transfer.

INTERVENTION

IVF care was routine until fertilization was confirmed. Two-pronuclear embryos (2PNs) were then randomized: One-half of each patient's 2PNs were cultured in dynamic culture and one-half in static culture. Preimplantation genetic testing for embryonic aneuploidy was used to control for aneuploidy and allow for DNA fingerprinting. The best euploid blastocyst from each culture system was selected and patients underwent a frozen two-embryo transfer. If a singleton gestation resulted, DNA-fingerprinting was used to determine which of the two blastocysts implanted. The dynamic platform used was the NSSB-300 (Nepagene).

MAIN OUTCOME MEASURE(S)

The primary outcome was the proportion of usable blastocysts obtained. The secondary outcome was sustained implantation rate (SIR).

RESULT(S)

One hundred participants completed oocyte retrieval and blastocyst vitrification for frozen-thawed embryo transfer; 609 dynamic 2PNs and 615 static 2PNs were followed; and 304 blastocysts developed in dynamic culture and 333 blastocysts developed in static culture. In the paired analysis, the rate of usable blastulation was similar between dynamic and static culture (58.3% vs. 57.1%). In addition, there was no difference in the rate of aneuploidy (20.0% vs. 33.3%) or SIR (67.1% vs. 63.1%) between groups.

CONCLUSION(S)

In this paired RCT, dynamic culture did not improve usable blastulation rate or SIR.

CLINICAL TRIAL REGISTRATION NUMBER

NCT02467725.

Improvement of embryonic development and clinical outcomes of germinal vesicle stage oocytes using a microvibration culture system

In vitro maturation (IVM) has evolved as a clinical treatment option in assisted reproductive technology. However, the poor developmental potential of germinal vesicle (GV)-stage oocytes is still suboptimal. This study's objective was to evaluate the effect of a microvibration culture system (MVC) during IVM and/or in vitro culture (IVC) on the clinical outcomes and the embryonic development potential of human GV-stage oocytes collected from human chorionic gonadotropin (HCG)-primed IVM and fertilization-embryo transfer (IVM/F-ET) cycles of patients with polycystic ovaries (PCO). A total of 206 HCG-primed IVM/F-ET cycles were divided into four groups according to the microvibration and static culture system applied during IVM and/or IVC: Group SS (static system during both IVM and IVC); Group SV (static system during IVM alternated with microvibration system during IVC); Group VS (microvibration system during IVM alternated with static system during IVC), and Group VV (microvibration system during both IVM and IVC). The results indicate that the rates of in vitro MII oocytes per cycle, fertilization, and cleavage were not significantly different between the groups. The rate of good-quality embryos in Group SV tended to be higher than the rate in Groups SS and VS, but there was no significant difference between Group SS and Group SV. Clinical pregnancy, implantation, and live birth rates of Groups SV and VS were slightly higher than those of Group SS. However, the rate of good-quality embryos with at least six cells on day 4, the clinical pregnancy, implantation, and live births in Group VV were significantly higher than those in Group SS. These results indicate that, compared with the static culture system, the MVC system applied for both IVM and IVC seems to improve the clinical outcomes and the quality of embryos of GV oocytes derived from HCG-primed IVM/F-ET cycles in PCO patients. Abbreviations: PCO: polycystic ovaries; HCG: human chorionic gonadotropin; GV: germinal vesicle; MII: metaphase II; IVM: in vitro maturation; IVF: in vitro fertilization; IVC: in vitro culture: MVC: microvibration culture; SC: static culture; ICSI: intracytoplasmic sperm injection; IVM/F-ET: IVM and fertilization-embryo transfer; AMH: anti-Mullerian hormone; OHSS: ovarian hyperstimulation syndrome.

Optimizing the culture environment and embryo manipulation to help maintain embryo developmental potential

With increased use of comprehensive chromosome screening (CCS), the question remains as to why some practices do not experience the same high levels of clinical success after implementation of the approach. Indeed, the debate surrounding the efficacy and usefulness of blastocyst biopsy and CCS continues. Importantly, several variables impact the success of an assisted reproductive technology cycle. Transfer of a euploid embryo is but one factor in an intricate system that requires numerous steps to occur successfully. Certainly, the culture environment and the manipulations of the embryo during its time in the laboratory can impact its reproductive potential. Environmental stressors ranging from culture media to culture conditions and even culture platform can impact biochemical, metabolic, and epigenetic patterns that can affect the developing cell independent of chromosome number. Furthermore, accompanying procedures, such as biopsy and vitrification, are complex and, when performed improperly, can negatively impact embryo quality. These are areas that likely still carry room for improvement within the IVF laboratory.

Microwells support high-resolution time-lapse imaging and development of preimplanted mouse embryos

A vital aspect affecting the success rate of in vitro fertilization is the culture environment of the embryo. However, what is not yet comprehensively understood is the affect the biochemical, physical, and genetic requirements have over the dynamic development of human or mouse preimplantation embryos. The conventional microdrop technique often cultures embryos in groups, which limits the investigation of the microenvironment of embryos. We report an open microwell platform, which enables micropipette manipulation and culture of embryos in defined sub-microliter volumes without valves. The fluidic environment of each microwell is secluded from others by layering oil on top, allowing for non-invasive, high-resolution time-lapse microscopy, and data collection from each individual embryo without confounding factors. We have successfully cultured mouse embryos from the two-cell stage to completely hatched blastocysts inside microwells with an 89% success rate (n = 64), which is comparable to the success rate of the contemporary practice. Development timings of mouse embryos that developed into blastocysts are statistically different to those of embryos that failed to form blastocysts (p-value < 10(-10), two-tailed Student's t-test) and are robust indicators of the competence of the embryo to form a blastocyst in vitro with 94% sensitivity and 100% specificity. Embryos at the cleavage- or blastocyst-stage following the normal development timings were selected and transferred to the uteri of surrogate female mice. Fifteen of twenty-two (68%) blastocysts and four of ten (40%) embryos successfully developed into normal baby mice following embryo transfer. This microwell platform, which supports the development of preimplanted embryos and is low-cost, easy to fabricate and operate, we believe, opens opportunities for a wide range of applications in reproductive medicine and cell biology.

Effect of 7,8-dihydroxyflavone as an antioxidant on in vitro maturation of oocytes and development of parthenogenetic embryos in pigs

One of the factors that impairs in vitro produced porcine embryos is the oxidative stress that is mainly caused by the imbalance between reactive oxygen species (ROS) generation and antioxidants activity, especially that of glutathione (GSH). Here, we examined the effect of 7,8-dihydroxyflavone (7,8-DHF), a kind of flavonoid antioxidant, on porcine oocyte maturation and its developmental competence. Porcine oocytes were cultured in media supplemented with 0, 1, 5 and 10 μM 7,8-DHF during both in vitro maturation (IVM) and in vitro culture (IVC) after parthenogenetic activation. Maturation of oocytes was evaluated based on first polar body (PB) extrusion and intracellular GSH level, and developmental competence was assessed through observing cleavage and blastocyst formation. In each step, the levels of intracellular GSH and ROS were assessed by fluorescence intensity, and the apoptosis-related gene expression was examined using semiquantitative RT-PCR. The group treated with 1 μM 7,8-DHF during IVM and IVC showed increased cytoplasmic maturation and reached the blastocysts stage (36.1%) at a higher rate than the other groups (24.7, 16.0 and 10.3% for 0, 5 and 10 μM, P<0.05). In that group, the intracellular GSH level was significantly increased while ROS generation was significantly decreased after IVM and IVC (P<0.05). Moreover, it showed high expression of an anti-apoptotic gene (BCL2L1) and low expression of a pro-apoptotic gene (BAK1) (P<0.05). In conclusion, treatment with 1 μM 7,8-DHF during IVM and IVC showed an anti-apoptotic effect by increasing intracellular GSH synthesis and scavenging ROS and therefore improved the developmental competence of porcine embryos.

Thinking big by thinking small: application of microfluidic technology to improve ART

In Vitro Fertilization (IVF) laboratories often carry a penchant to resist change while in the pursuit of maintaining consistency in laboratory conditions. However, implementation of new technology is often critical to expand scientific discoveries and to improve upon prior successes to advance the field. Microfluidic platforms represent a technology that has the potential to revolutionize the fundamental processes of IVF. While the focus of microfluidic application in IVF has centered on embryo culture, the innovative platforms carry tremendous potential to improve other procedural steps and represents a possible paradigm shift in how we handle gametes and embryos. The following review will highlight application of various microfluidic platforms in IVF for use in maturation, manipulation, culture, cryopreservation and non-invasive quality assessment; pointing out new insights gained into functions of sperm, oocytes and embryos. Platform design and function will also be discussed, focusing on limitations, advancements and future refinements that can further aid in their clinical implementation.

Culture systems: fluid dynamic embryo culture systems (microfluidics)

The tubal/uterine lumen is a dynamic environment in which oocytes, eggs, and early embryos are submitted to different forces generated by cilia and peristaltic flow of tubal fluid. The movement of the tubal/uterine fluid, the chemical diversity, and their interaction produce a unique environment able to support embryo development and modulate gene expression. Although culture of embryos is supported in static and low complexity chemical conditions, application of fluidic dynamics in assisted reproduction technology to improve outcomes has been in development for almost a decade. Several attempts to build devices able to facilitate fertilization and embryo culture have been made, but dynamic fluidic devices are not yet available for mass scale use in clinical embryology laboratories. Indeed, such devices for embryo culture have been constructed and they are under evaluation in IRB approved studies. Fluid dynamic devices appear to enhance embryo development and they may be innovative resources for clinical and experimental embryology laboratories. This chapter reviews the principles and results of dynamic fluid systems, and the materials and methods required to produce microfunnel dynamic culture systems for use with embryos.

Rethinking in vitro embryo culture: new developments in culture platforms and potential to improve assisted reproductive technologies

The preponderance of research toward improving embryo development in vitro has focused on manipulation of the chemical soluble environment, including altering basic salt composition, energy substrate concentration, amino acid makeup, and the effect of various growth factors or addition or subtraction of other supplements. In contrast, relatively little work has been done examining the physical requirements of preimplantation embryos and the role culture platforms or devices can play in influencing embryo development within the laboratory. The goal of this review is not to reevaluate the soluble composition of past and current embryo culture media, but rather to consider how other controlled and precise factors such as time, space, mechanical interactions, gradient diffusions, cell movement, and surface interactions might influence embryo development. Novel culture platforms are being developed as a result of interdisciplinary collaborations between biologists and biomedical, material, chemical, and mechanical engineers. These approaches are looking beyond the soluble media composition and examining issues such as media volume and embryo spacing. Furthermore, methods that permit precise and regulated dynamic embryo culture with fluid flow and embryo movement are now available, and novel culture surfaces are being developed and tested. While several factors remain to be investigated to optimize the efficiency of embryo production, manipulation of the embryo culture microenvironment through novel devices and platforms may offer a pathway toward improving embryo development within the laboratory of the future.

Culture systems: embryo density

Embryo density is defined as the embryo-to-volume ratio achieved during in vitro culture; in other words, it is the number of embryos in a defined volume of culture medium. The same density can be achieved by manipulating either the number of embryos in a given volume of medium, or manipulating the volume of the medium for a given number of embryos: for example, a microdrop with five embryos in a 50 μl volume under oil has the same embryo-to-volume ratio (1:10 μl) as a microdrop with one embryo in a 10 μl volume under oil (1:10 μl). Increased embryo density can improve mammalian embryo development in vitro; however, the mechanism(s) responsible for this effect may be different with respect to which method is used to increase embryo density.Standard, flat sterile plastic petri dishes are the most common, traditional platform for embryo culture. Microdrops under a mineral oil overlay can be prepared to control embryo density, but it is critical that dish preparation is consistent, where appropriate techniques are applied to prevent microdrop dehydration during preparation, and results of any data collection are reliable, and repeatable. There are newer dishes available from several manufacturers that are specifically designed for embryo culture; most are readily available for use with human embryos. The concept behind these newer dishes relies on fabrication of conical and smaller volume wells into the dish design, so that embryos rest at the lowest point in the wells, and where putative embryotrophic factors may concentrate.Embryo density is not usually considered by the embryologist as a technique in and of itself; rather, the decision to culture embryos in groups or individually is protocol-driven, and is based more on convenience or the need to collect data on individual embryos. Embryo density can be controlled, and as such, it can be utilized as a simple, yet effective tool to improve in vitro development of human embryos.

The ability to achieve meiotic maturation in the dog oocyte is linked to glycolysis and glutamine oxidation

We tested the hypothesis that meiotic competence of dog oocytes is tightly linked with donor follicle size and energy metabolism. Oocytes were recovered from small (<1 mm diameter, n = 327), medium (1-<2 mm, n = 292) or large (≥2 mm, n = 102) follicles, cultured for 0, 24, or 48 hr, and then assessed for glycolysis, glucose oxidation, pyruvate uptake, glutamine oxidation, and nuclear status. More oocytes (P < 0.05) from large follicles (37%) reached the metaphase-II (MII) stage than from the small group (11%), with the medium-sized class being intermediate (18%; P > 0.05). Glycolytic rate increased (P < 0.05) as oocytes progressed from the germinal vesicle (GV) to MII stage. After 48 hr of culture, oocytes completing nuclear maturation had higher (P < 0.05) glycolytic rates than those arrested at earlier stages. GV oocytes recovered from large follicle oocytes had higher (P < 0.05) metabolism than those from smaller counterparts at culture onset. MII oocytes from large follicles oxidized more (P < 0.05) glutamine than the same stage gametes recovered from smaller counterparts. In summary, larger-sized dog follicles contain a more metabolically active oocyte with a greater chance of achieving nuclear maturation in vitro. These findings demonstrate a significant role for energy metabolism in promoting dog oocyte maturation, information that will be useful for improving culture systems for rescuing intraovarian genetic material.