Influence of different types of whitening tooth pastes on the tooth color, enamel surface roughness and enamel morphology of human teeth

Influence of using different toothpaste during bleaching with violet LED light (405 nm) on the colour and roughness of dental enamel: an in vitro study

This in vitro study aimed to investigate potential changes in the color and roughness of dental enamel resulting from the use of different toothpaste formulations during bleaching with violet LED light (405 nm). Sixty specimens of bovine incisors, each measuring 6 × 6 × 3 mm, were segregated into six distinct experimental groups based on their respective treatments (n = 10): C + VL: Brushing with Colgate® Total 12 + bleaching with violet LED; LB + VL: Brushing with Colgate® Luminous White Brilliant + bleaching with violet LED; LI + VL: Brushing with Colgate® Luminous White Instant + violet LED bleaching; C: Brushing with Colgate® Total 12; LB: Brushing with Colgate® Luminous White Brilliant; LI: Brushing with Colgate® Luminous White Instant. The examined variables included alterations in color (∆L*, ∆a*, ∆b*, ∆Eab, and ∆E00), surface roughness (Ra), and scanning electron microscopy observations. No statistically significant distinctions emerged in total color variations (∆E00 and ∆E) among the groups under scrutiny. Notably, the groups that employed Colgate® Luminous White Instant displayed elevated roughness values, irrespective of their association with violet LED, as corroborated by scanning electron microscopy examinations. It can be concluded that whitening toothpastes associated to violet LED do not influence the color change of dental enamel in fifteen days of treatment. Toothpastes with a higher number of abrasive particles showed greater changes in enamel roughness, regardless of the use of violet LED.

Evaluating the Effects of Cigarette Smoking and Heated Tobacco Products on Hard Dental Tissues: A Comparative Histological and Colorimetric Analysis

OBJECTIVES

This study aimed to evaluate and compare the impact of cigarette smoking (CS) and heated tobacco (HT) on the alteration of color and ultrastructural characteristics of human enamel and cementum.

BACKGROUND

According to tobacco companies, a less harmful substitute for CS is HT products. Nevertheless, comprehensive research on the effects of HT on tooth structures has been lacking. This study aimed to evaluate and compare the impact of CS and HT on the alteration of color and ultrastructural characteristics of human enamel and cementum.

MATERIALS AND METHODS

Thirty intact and noncarious human maxillary premolars extracted for orthodontic treatment purposes, previously disinfected, were used in the study. The specimens were randomly separated into six groups (n = 10), as follows: Group 1: enamel without smoking exposure; Group 2: enamel exposed to CS; Group 3: enamel exposed to HT; Group 4: cementum without smoking exposure; Group 5: cementum exposed to CS; and Group 6: cementum exposed to HT. The measurement of color change was conducted using a spectrophotometer. The surface alterations and mineral composition of enamel and cementum were evaluated using scanning electron microscopy and energy-dispersive X-ray spectroscopy. ANOVA test followed by Tukey's post hoc test was used to determine significant differences between groups.

RESULTS

Results showed that CS had a more pronounced effect on enamel and cementum color changes than HT. The impact of CS and HT on color changes was more evident in cementum than in enamel. Surface morphology of enamel and cementum showed alterations in histology following exposure to both smoking types. Moreover, the mineral content experienced a significant reduction after using CS and HT. The reduction in calcium content after CS and HT exposure was similar. However, HT led to a significant decrease in the phosphorus content of enamel when compared with CS. At the same time, CS exposure in cementum resulted in a more significant reduction in Ca/P ratio than HT.

CONCLUSIONS

Although HT may appear to present a lower danger to hard dental tissues than CS, it is not entirely harmless. CS results in more color changes on the enamel and cementum of teeth. Both smoking methods affected the mineral content of teeth, with CS having a significant effect on the roots, while HT significantly affected the crowns' mineral composition.

Whitening toothpastes with hydrogen peroxide concentrations vs. at-home bleaching

OBJECTIVES

To evaluate the effect of whitening toothpastes with different hydrogen peroxide (HP) concentrations on HP permeability, color change, and physicochemical properties, compared to at-home bleaching treatment.

MATERIALS AND METHODS

Forty-nine premolars were randomized into seven groups (n = 7): untreated (control); at-home bleaching with 10% carbamide peroxide gel (AH; 10% CP) with 14 and 28 applications of 180 min each (AH [14 × 180 min] and AH [28 × 180 min]); three whitening toothpastes (3% HP; 4% HP and 5% HP) and 10% CP brushed 28 times for 90 s each (TB [28 × 90 s]). HP permeability was measured using a UV-VIS spectrophotometer and color change by a digital spectrophotometer (ΔEab, ΔE00, and ΔWID). Initial concentration, pH, and viscosity were measured through titration, digital pH meter, and rheometer, respectively. Statistical analysis included one-way ANOVA, Tukey's test, and Dunnett's test (α = 0.05).

RESULTS

4% HP group showed acidic pH, the lowest viscosity and the highest HP concentration into the pulp chamber (p < 0.05). The 10% CP groups had lower HP in the pulp chamber and greater color change than other groups (p < 0.05), except the 5% HP group in ΔEab and ΔE00. For ΔWID, the 10% CP AH groups showed greater whitening than other groups (p < 0.05).

CONCLUSIONS

Whitening toothpaste with up to 5% HP resulted in higher HP permeability and less color change compared to 10% CP. Higher HP commercial concentrations in toothpaste increased whitening effect; however, acidic pH toothpastes exhibited greater HP permeability.

CLINICAL RELEVANCE

Whitening toothpastes with high hydrogen peroxide concentrations were less effective than at-home bleaching, resulting in less color change and greater permeability of hydrogen peroxide, potentially increasing the risk of tooth sensitivity.

Effect of conventional cigarette smoking and recent heated tobacco products on CAD/CAM restorative materials

OBJECTIVE

To determine the effects of conventional cigarette smoking (CS) and recent heated tobacco products (HTPs) on the surface roughness and color stability of different indirect restorative materials.

MATERIALS AND METHODS

One hundred disc-shaped samples were constructed of three different restorative CAD/CAM materials: lithium disilicate glass-ceramic (IPS e.max CAD; Ivoclar Vivadent, Liechtenstein), zirconia (BruxZir® Zirconia, Glidewell, USA) and polyetheretherketone (BioHPP® bredent GmbH, Germany). Of the IPS e.max CAD and the Bruxzir samples, 20 samples were glazed, and 20 samples were polished, while the BioHPP samples were all polished according to the manufacturer's instructions. Fifty samples were subjected to conventional cigarette smoking (LM, Philip Morris International Inc., Egypt) (Groups: IPS e.max CAD_Glazed exposed to CS (LD_G_Cig), IPS e.max CAD_Polished exposed to CS (LD_P_Cig), Bruxzir_Glazed exposed to CS (Zr_G_Cig), Bruxzir _Polished exposed to CS (Zr_P_Cig) and BioHPP exposed to CS (PEEK_Cig) and fifty samples were exposed to heated tobacco product smoking (Heets, Russet selection, Philip Morris International Inc., Italy) (Groups: IPS e.max CAD_Glazed exposed to HTP (LD_G_HTP), IPS e.max CAD_Polished exposed to HTP (LD_P_HTP), Bruxzir_Glazed exposed to HTP (Zr_G_HTP), Bruxzir CAD_Polished exposed to HTP (Zr_P_HTP) and BioHPP exposed to HTP (PEEK_HTP).. Six hundred cigarettes/heets representing 30 days of medium smoking behavior (20 cigarettes/day) were used. Before and after exposure to smoke, the surface roughness of all the samples was measured using JITAI8101 surface roughness tester (Beijing Jitai Tech Detection Device Co., Ltd, China, and the color parameters were assessed using VITA Easyshade Advance 4.01 (VITA shade, VITA made, VITA). The data were analyzed using One-way ANOVA, paired sample t-test and independent sample t-test. The significance level was set at α < 0.05. The surface topography was evaluated by scanning electron microscopy (SEM) and analyzed using energy-dispersive X-ray (EDX) spectroscopy to determine changes in the surface chemical composition.

RESULTS

Both types of smoking caused significant increases in the surface roughness of all the samples. There was a significant difference in color change between CS and HTP for all materials with different surface finish (P < 0.01) and zirconia had the greatest effect on color change (P < 0.001). In contrast, polyetheretherketone (PEEK) "BioHPP" had the least effect (P < 0.001).

CONCLUSION

Exposure to different types of smoking induce changes in the surface topography and color of different esthetic restorative materials. Compared with HTP, conventional cigarette smoke has a greater effect on the surface roughness and color stability of esthetic restorative materials. The glazed surfaces showed less change in surface topography than did the polished surfaces. Zirconia showed better color stability when compared to polyetheretherketone (PEEK).

Over-the-counter products in tooth bleaching: A scoping review

OBJECTIVE

To map and summarize the current scientific evidence concerning the active ingredients, effectiveness, and adverse effects of over-the-counter (OTC) bleaching products.

DATA AND SOURCE

This study was conducted according to the PRISMA-ScR guidelines for scoping reviews and registered on the Open Science Framework platform.

STUDY SELECTION

Database searches were conducted in PubMed/MEDLINE, Embase, and Scopus up to January 2024. All in vitro, in situ, and clinical studies evaluating the effectiveness and adverse effects of OTC bleaching products were included. A descriptive analysis of the included studies was performed.

RESULTS

A total of 88 studies were included. Most of them were in vitro studies (n = 49), followed by randomized clinical trials (n = 28). The main OTC bleaching products identified were whitening or stain-removing toothpastes (n = 42), followed by whitening strips (n = 39). Most clinical studies indicate that whitening strips are effective in improving tooth color and providing whitening benefits. In contrast, the bleaching effectiveness of toothpastes, mouth rinses and whitening trays was mainly supported by in vitro studies. The main adverse effects associated with OTC bleaching agents were tooth sensitivity and gingival irritation.

CONCLUSION

A wide variety of OTC bleaching products is available for consumer self-administered use. Clinical studies have mainly confirmed the bleaching effectiveness of whitening strips, while the validation for toothpastes, mouth rinses and whitening trays has mainly relied on in vitro studies. Nevertheless, the use of OTC bleaching products may result in adverse effects, including tooth sensitivity, gingival irritation, and enamel surface changes.

CLINICAL SIGNIFICANCE

Some over-the-counter bleaching products may have whitening properties supported by clinical studies, particularly those containing hydrogen or carbamide peroxide. Nonetheless, clinicians must be aware of the potential risks associated with excessive self-administration of these products, which may result in adverse effects.

Effect of whitening toothpastes with different hydrogen peroxide concentrations: Penetration into the pulp chamber and color change

OBJECTIVES

This study evaluated the efficacy of simulated brushing with toothpastes containing different concentrations of hydrogen peroxide (HP) in pulp chamber penetration and color change. Also, physical-chemical properties (concentration, pH and viscosity) were evaluated.

METHODS

Forty-nine premolars were divided into seven groups (n = 7): untreated (control); whitening gel (White Class 6 %, 6 %BG) with one 90  min application (6 %BG 90  min) and 14 applications of 90  min (6 %BG 14×90 min); toothpastes (Colgate Luminous White Glow 3 %, 3 %TP; Crest 3D White Brilliance 4 %, 4 %TP; Colgate Optic White Pro-Series 5 %, 5 %TP) and 6 %BG toothbrushing for 14 applications of 90 s. HP penetration into the pulp chamber was measured through UV-Vis spectrophotometry and color change with a spectrophotometer (ΔEab, ΔE00, and ΔWID). Initial concentration, pH, and viscosity were measured through Titration, Digital pH-meter, and Rheometer, respectively. Statistical analysis used one-way ANOVA and Tukey's test (α = 0.05).

RESULTS

6 %BG (14×90 min) and 4 %TP groups showed acidic pH and higher concentrations of HP in the pulp chamber compared to the other groups (p < 0.05). On the other side, 3 %TP and 5 %TP groups showed alkaline pH, higher viscosity between the toothpastes and lower HP penetration (p < 0.05). The 6 %BG AH (14×90 min) group exhibited the most significant color change (ΔEab, ΔE00, and ΔWID) (p < 0.05).

CONCLUSIONS

Brushing with whitening toothpaste with an acidic pH leads to greater HP penetration into pulp chamber; but, even when a high concentrated HP whitening toothpaste was used, a lower whitening effect was observed when compared to a two-week at-home bleaching.

CLINICAL SIGNIFICANCE

Whitening toothpastes containing up to 5 % HP produced lower whitening effect than two-week at-home bleaching. Additionally, HP was detected within the pulp chamber which can potentially impact in tooth sensitivity.

Effect of Two Different Intraoral Polishing Systems on Surface Roughness, Color Stability, and Bacterial Accumulation of Zirconia-Reinforced Lithium Silicate Ceramic

OBJECTIVE

 The aim of this study was to investigate the effects of two intraoral polishing methods on zirconia-reinforced lithium silicate ceramic after ultrasonic scaling.

MATERIALS AND METHODS

 Thirty disc-shaped samples of zirconia-reinforced lithium silicate were constructed. Freshly extracted bovine teeth were collected and cleaned then the discs were cemented into a cavity prepared onto their labial surface. The samples were divided into three groups (10 samples per group); S: Scaling only, SE: Scaling followed by polishing using Eve Diapro lithium disilicate polishers, SD: Scaling followed by polishing using Diatech ShapeGuard ceramic polishing plus kit. The surface roughness was evaluated after scaling and polishing the samples. For color stability, the samples were stored for 12 days at 37°C in an incubator to simulate 1-year consumption of coffee. L*a*b* color parameters were assessed using VITA Easyshade Advance 4.0 before and after the staining procedure and the color difference was measured. Finally, bacterial accumulation was evaluated by incubating the samples with a suspension of Streptococcus mutans ( S. mutans), after that the S. mutans colonies were counted to obtain the values of colony-forming units (CFU). The final overall roughness, change in color and bacterial count were compared between all groups using one-way ANOVA and Tukey's post-hoc analysis. The Pearson correlation coefficient was used to determine the correlation between continuous variables. The cutoff for significance was chosen at p ≤ 0.05.

RESULTS

 Scaling induced surface roughness of the zirconia-reinforced lithium silicate ceramic was significantly decreased after using both intraoral polishing systems and this was accompanied by a significant decrease in color change and bacterial count.

CONCLUSION

 Intraoral polishing techniques can reduce the roughness of the surface of zirconia reinforced lithium silicate restorations induced due to scaling and subsequently reduce the stainability and bacterial accumulation.

Effect of whitening toothpastes on the surface roughness and microhardness of human teeth-an in vitro study

OBJECTIVE

To determine the effect of whitening toothpastes on the surface roughness and microhardness of human teeth.

METHODOLOGY

Surface roughness was estimated using the Talysurf instrument, and microhardness was estimated using the Vickers hardness tester before and after the application of whitening toothpastes on mounted extracted human teeth.

RESULTS

In the activated charcoal group, there was a reduction in the surface roughness from 1.21 at baseline to 1.09 at 1 month and a further reduction to 1.02 at 3 months, which was found to be statistically significant. However, no statistically significant difference in surface roughness was found in the other toothpaste groups. With respect to microhardness, all 4 whitening toothpastes showed a statistically significant reduction in microhardness after 3 months of brushing. However, the reduction was significantly higher in group 2 and in group 4 compared to the others.

CONCLUSION

This study showed that whitening toothpaste containing activated charcoal significantly reduced the surface roughness, whereas toothpastes with blue covarine and toothpastes containing activated charcoal significantly reduced the microhardness of the tooth.

CLINICAL RELEVANCE

This study emphasizes the need for healthcare professionals to be aware of the potential disadvantages of whitening toothpastes and make evidence-based decisions when recommending the product to patients.

Which whitening toothpaste with different contents is more effective on color and bond strength of enamel?

OBJECTIVE

To evaluate the effects of six whitening toothpastes with different whitening ingredients as follows: abrasives, polyphosphates, activated charcoal and hydrogen peroxide on the color, and shear bond strength (SBS) of enamel.

MATERIALS AND METHODS

Thirty-five extracted human molars were sectioned in mesiodistal direction, providing 70 enamel specimens and randomly divided into seven groups having different whitening ingredients (n = 10). After baseline color measurements, the specimens were brushed three times daily for the 30 s. At the end of 2 weeks, spectrophotometric readings were repeated, and color change parameters were calculated. Then, composite cylinders were built on the enamel surfaces and the specimens were subjected to SBS test. Failure modes were determined under a stereomicroscope (×10). One specimen from each group was examined with scanning electron microscope (SEM). The data were statistically analyzed using Kruskal-Wallis, Wilcoxon signed, one-way-ANOVA (p = 0.05).

RESULTS

Clinically acceptable color change was observed in all whitening toothpastes. There were no significant differences among the groups for Δa, ΔL, ΔE₀₀ , and ΔWI_D (p > 0.05). The differences among the groups were not significant regarding SBS and failure mode distributions (p > 0.05). SEM findings were in line with the SBS test and failure mode distribution results.

CONCLUSIONS

All the tested whitening toothpastes showed similar and clinically acceptable efficacy on the color change of the enamel and led to comparable SBS values.

CLINICAL SIGNIFICANCE

The tested whitening toothpastes had an acceptable whitening efficacy and did not have a negative effect on the bond strength to the enamel.

Whitening Effect of Different Toothpastes on Bovine Dental Enamel: an in situ study

The aim of this in situ study was to evaluate color change, surface roughness, gloss, and microhardness in tooth enamel submitted to whitening and remineralizing toothpastes. Fifteen healthy adults (REBEC - RBR-7p87yr) (with unstimulated salivary flow ≥ 1.5 ml for 5 minutes, pH=7) wore two intraoral devices containing four bovine dental fragments (6 x 6 x 2 mm). Participants were randomly assigned and instructed to toothbrush the devices with the tested toothpastes (30 days): CT: conventional; WT: whitening; WTP: whitening with peroxide, and RT: remineralizing toothpaste. A washout period of 7 days was established. Readouts of color, gloss, surface roughness, and microhardness were performed before and after brushing. The results demonstrated no color, gloss, and microhardness differences (p>0.5). The samples brushed with WTP (0.2(0.7) showed higher surface roughness (p=0.0493) than those with WT (-0.5(1.0). The toothpastes did not alter the properties of the dental enamel, except for the roughness. Toothpaste with an abrasive system based on sodium bicarbonate and silica, and that contains sodium carbonate peroxide increased the surface roughness of the enamel.

Thr in vitro Effect of Dentifrices With Activated Charcoal on Eroded Teeth

AIM

The objective of this research was to compare the abrasive potential of dentifrices containing activated charcoal with those of a conventional dentifrice on the development of erosive tooth wear (ETW) in vitro.

METHODS

Enamel and dentin samples were divided into toothpastes (n = 12): group (G)1-Colgate Triple Action (1450 ppm F) (positive control); G2-Colgate Natural Extracts (1450 ppm F); G3-Colgate Luminous White Activated Carbon (1450 ppm F); G4-Oral-B Whitening Therapy Charcoal (1100 ppm F); G5-Oral-B 3D White Mineral Clean (1100 ppm F); G6-Curaprox Black Is White (950 ppm F); and G7-erosion only (no abrasion, negative control). All samples were submitted to erosive pH cycles and G1 to G6 to abrasive challenges (15 seconds) using toothpastes' slurries plus 45 seconds of treatment for 7 days. The final profile was overlaid to the baseline one for the ETW calculation (µm). The data were subjected to analysis of variance/Tukey or Kruskal-Wallis/Dunn tests (P < .05).

RESULTS

Oral-B 3D White (13.0 ± 1.0, 9.37 [1.36] μm), Oral-B Whitening Therapy (15.1 ± 1.2, 8.58 [1.71] μm), and Colgate Luminous White (13.6 ± 1.0, 7.46 [0.94] μm) toothpastes promoted the greatest enamel and dentin wear. On the other hand, Colgate Triple Action (12.2 ± 1.2, 5.30 [1.26] μm), Colgate Natural Extracts (10.8 ± 1.1, 4.16 [1.11] μm), and Curaprox Black Is White (11.5 ± 1.5, 4.06 [0.92] μm) toothpastes promoted lower wear values, similar to erosion only (4.16 [0.94] μm) in the case of dentin but not enamel (7.1 ± 0.8 μm).

CONCLUSIONS

Toothpastes containing charcoal combined with pyrophosphate may have a high abrasive effect on eroded tooth surfaces. Many patients influenced by digital marketing use toothpastes containing activated charcoal with the aim of bleaching their teeth. However, care should be taken when using these products, as they may have a high abrasive effect.

Effect of Whitening Toothpaste on Surface Roughness and Colour Alteration of Artificially Extrinsic Stained Human Enamel: In Vitro Study

Objective: The aim of this study was to compare five toothpastes in terms of alteration of surface roughness and colour of red-wine-stained human enamel over time after brushing simulation. Methods: Stained specimens were randomly divided into five groups (n = 8): Oral-B Gum and Enamel (C), ZACT Stain Fighter (ZW), Colgate Optic White Volcanic Mineral (CW), Oral-B 3D White Luxe Fresh Breath (3DW), and Thepthai (TW). The colour and surface roughness of the specimens were measured after brushing simulation for four durations; two weeks, one month, six months, and twelve months. Abrasive particles in toothpaste were inspected under a scanning electron microscope. Results: Surface roughness was increased in the specimens that underwent brushing simulation in all groups (p < 0.05). ZW (6.33 ± 0.98 μm) exerted the most changes in surface roughness for all durations. Other groups showed similar surface roughness at each time point. ΔE00 and ΔL were increased in all groups until twelve months; however, there were no significant differences between C (ΔE00 = 30.17 ± 4.16, ΔL = 38.19 ± 4.34), CW (ΔE00 = 24.25 ± 10.52, ΔL = 31.12 ± 11.00), and TW (ΔE00 = 29.00 ± 3.96, ΔL = 36.68 ± 4.53) at any time period. Moreover, ZW (ΔE00 = 45.6 ± 8.01, ΔL = 53.03 ± 6.71) and 3DW (ΔE00 = 43.6 ± 7.33, ΔL = 51.03 ± 6.47) exhibited a substantial change and were statistically differed from the other groups after four-weeks. Various characteristics of abrasive particles were inspected under SEM. Conclusion: All five toothpastes increased the surface roughness altered the colour of red wine-stained human enamel over time.

Effect of Over-The-Counter Tooth-Whitening Products on Enamel Surface Roughness and Microhardness

Background: To evaluate the efficacy of new over-the-counter tooth-whitening products on enamel surface roughness and microhardness. Methods: A total of 120 enamel specimens were prepared and randomly allocated into six groups. Group A was treated with 10% carbamide peroxide; Group B was immersed in distilled water; Group C was treated with hydrated silica, sodium hexametaphosphate toothpaste; Group D was treated with sodium bicarbonate; Group E was treated with 0.25% citric acid; and Group F was treated with hydrated silica, charcoal powder. Results: A, B, and D demonstrated decreased Ra, whereas Groups C, E, and F showed an increased Ra after whitening. The changes in Ra from T0 to T1 in each group was statistically significant (p < 0.001) except for Group B (p = 0.85). The groups showed decreased KHN after whitening, except for specimens in Group B (distilled water). The KHN from T0 to T1 decreased significantly for groups A, C, E, and F (p = 0.001). Significant difference was observed at T1 (p < 0.0001). Conclusion: Within the limitations of this study, it could be demonstrated that surface roughness and enamel microhardness changes were influenced by the type, composition, and exposure time of the whitening product.

EXPERIMENTAL STUDY OF CHANGES IN THE CHEMICAL COMPOSITION OF TOOTH ENAMEL WHEN USING HYDROGEN PEROXIDE AS THE MAIN CHEMICAL COMPONENT IN PROFESSIONAL BLEACHING

OBJECTIVE

The aim: To study changes in the chemical composition of the tooth enamel surface when using hydrogen peroxide as a chemical component of the whitening system in combination with professional oral hygiene.

PATIENTS AND METHODS

Materials and methods: To achieve this goal, during the study, we studied the enamel of the teeth of the frontal area, which was removed for orthodontic and orthopedic indications. The age of the patients whose teeth were examined ranged from 18 to 44 years. In the experiment, we studied the chemical structure of enamel by a method thatcovered the selection of the study area, with the designation of areas for microanalysis, and subsequent elemental analysis in selected areas of the enamel.

RESULTS

Results and conclusions: Analyzing the results of this study, we can make assumptions about the impact of professional dental hygiene on the procedure of photo-whitening teeth based on 35% hydrogen peroxide gel and its subsequent impact on theother clinical indicators, which will depend on the characteristics of functional and structural resistance of the enamel.

Effect of whitening toothpaste on surface roughness and microhardness of human teeth: a systematic review and meta-analysis

Background: Whitening toothpastes exert a whitening effect on teeth through higher surface cleaning effectiveness resulting from the abrasive properties of the paste or specific chemical components. This systematic review and meta-analysis was conceptualized to examine the relationship between whitening toothpastes and surface roughness as well as microhardness of human teeth and to clarify the evidence base available around this relationship by conducting a systematic review and meta-analysis of studies in this topic area, looking at in vitro randomized control trials.

Methods: Criteria for including studies in the review were done based on population, intervention, comparison, outcomes and study and studies were identified from electronic databases. Covidence® was used for data screening and data extraction. The CONSORT tool was used for checking relevant content and methodology used in each of the papers reviewed. Systematic review was done followed by meta-analysis, using Review Manager.

Results: A total of 125 articles were obtained on key word search. After duplicate removal and title screening, 17 articles were eligible for full text review. Finally, 7 studies were included for systematic review and meta-analysis was conducted on 4 studies. The forest plot for surface roughness showed that that the meta-analytic effect was statistically significant with surface roughness value being higher in the intervention group. The forest plot for microhardness showed that the meta-analytic effect was statistically significant with the microhardness value being lesser in the intervention group.

Conclusions: Although whitening toothpastes typically can lighten tooth color by about one or two shades, there is some evidence to show that these toothpastes also affect the mineral content of teeth by increasing surface roughness and reducing microhardness. More evidence and further research are needed to identify the type of whitening agent which will whiten the tooth effectively while maintaining the integrity of the tooth structure.

Effect of whitening toothpaste on surface roughness and microhardness of human teeth: a systematic review and meta-analysis

Background: Whitening toothpastes exert a whitening effect on teeth through higher surface cleaning effectiveness resulting from the abrasive properties of the paste or specific chemical components. This systematic review and meta-analysis was conceptualized to examine the relationship between whitening toothpastes and surface roughness as well as microhardness of human teeth and to clarify the evidence base available around this relationship by conducting a systematic review and meta-analysis of studies in this topic area, looking at in vitro randomized control trials. Methods: Criteria for including studies in the review were done based on population, intervention, comparison, outcomes and study and studies were identified from electronic databases. Covidence® was used for data screening and data extraction. The CONSORT tool was used for checking relevant content and methodology used in each of the papers reviewed. Systematic review was done followed by meta-analysis, using Review Manager. Results: A total of 125 articles were obtained on key word search. After duplicate removal and title screening, 17 articles were eligible for full text review. Finally, 7 studies were included for systematic review and meta-analysis was conducted on 4 studies. The forest plot for surface roughness showed that that the meta-analytic effect was statistically significant with surface roughness value being higher in the intervention group. The forest plot for microhardness showed that the meta-analytic effect was statistically significant with the microhardness value being lesser in the intervention group. Conclusions: Although whitening toothpastes typically can lighten tooth color by about one or two shades, there is some evidence to show that these toothpastes also affect the mineral content of teeth by increasing surface roughness and reducing microhardness. More evidence and further research are needed to identify the type of whitening agent which will whiten the tooth effectively while maintaining the integrity of the tooth structure.

Preferences of Sjögren's syndrome patients regarding potential new saliva substitutes

OBJECTIVES

Sjögren's syndrome (SS) patients should be involved in the development of new saliva substitutes at an early stage. The purpose of the current study was to explore the preferences of these patients regarding various product characteristics of potential new saliva substitutes.

MATERIAL AND METHOD

A questionnaire was distributed among SS patients. They could anonymously indicate their preferences for saliva substitute characteristics using 5-point Likert scales.

RESULTS

Fifty-nine SS patients filled in the questionnaire. According to their opinion, the most ideal saliva substitute has a thin-watery consistency with a neutral flavour that should be applied as a spray. Patients demand a prolonged alleviation of dry mouth complaints and neutralization of harmful bacteria. The patients mainly object against the presence of artificial sweeteners and alcohol in saliva substitutes, but have limited objections against the presence of vegetable-based ingredients and natural enzymes. Major objections were against the potential side effects "bitter taste" and "discoloration of teeth". Age and severity of xerostomia affected desire of flavours. Younger patients preferred menthol flavour, while respondents with severe xerostomia preferred the use of "neutral flavours" significantly more.

CONCLUSION

The most ideal saliva substitute has thin-watery consistency in spray form with a neutral flavour and providing long alleviation of dry mouth complaints. Besides, it should not contain artificial sweeteners or alcohol, and should not have a bitter taste or cause discoloration of the teeth.

CLINICAL RELEVANCE

Investigating the opinion of SS patients provides tailoured insights into their preference, which may contribute to the development of more effective saliva substitutes.

Effects of charcoal-based whitening toothpastes on human enamel in terms of color, surface roughness, and microhardness: an in vitro study

OBJECTIVE

Charcoal based oral care products have gained popularity in the last few years. The aim of this in vitro study was to compare the effects of different charcoal based whitening toothpastes on color, surface roughness and microhardness of human enamel.

MATERIALS AND METHODS

Forty-eight specimens obtained from human permanent upper incisor teeth were randomly divided into 4 groups(n=12):Group-1:Colgate Total 12(CT); Group-2:Body Kingdom(BK); Group-3:Black is White(BW), Group-4:Colgate optic white(COW). Following 4 days cycle of darkening(2-min chlorhexidine and 60-min black tea per day), a 12- week brushing(twice daily for 1 min)was performed. Color of specimens was measured using a spectrophotometer. A contact type profilometer was used to measure surface roughness (Ra) and Vicker's hardness tester was used for the changes in microhardness(VHN). A representative sample from each group was visualized by SEM. Data were analyzed by One-way ANOVA, Welch, Fisher's, Kruskall-Wallis, Wilcoxon Sign Rank and Paired t-tests(p<0.05).

RESULTS

After 12- week brushing, no differences were found among the groups in terms of color change(p=0.989). All toothpastes tested showed no clinically acceptable whitening performances. A substantial increase in surface roughness was found in all groups, except BW(p<0.05). An increase was found in microhardness with CT(p=0.013), while no changes were found with BK, BW and COW(p>0.05).Only few scratches were observed on the enamel surfaces by SEM evaluations.

CONCLUSION

Twelve week brushing with charcoal based whitening toothpastes and a regular fluoridated toothpaste presented similar effects in color of enamel. Surface roughness was increased(except BW) while microhardness was not affected(except CT) with charcoal based whitening toothpastes.

CLINICAL RELEVANCE

Charcoal based whitening toothpastes do not promise to whiten the human permanent teeth and their effects on enamel abrasion should not be disregarded.

Investigation of surface roughness values of various restorative materials after brushing with blue covarine containing whitening toothpaste by two different methods: AFM and profilometer

The aim of this study is to evaluate the effect of whitening toothpaste on the surface roughness of resin-based restorative materials by different measurement methods. Twenty four specimens from each of human enamel, a microhybrid composite and two nanohybrid composites discs (8.0 diameter × 4.0 mm thick) were divided into two groups (n = 12) according to toothbrushing solutıon and subjected to simulation toothbrushing (30,000 cycles) with both distilled water and whitening toothpaste containing blue covarine. Surface roughness was examined using atomic force microscopy (AFM), profilometer, and scanning electron microscopy (SEM), and the data obtained were subjected to analysis. Ra values of Tescera (TES) were significantly higher than Sonicfill 2 (SF2) when brushing both toothbrushing solutions for initial or 30,000 cycles. Roughness increased for SF2 and TES when brushed for 30,000 cycles and was higher than enamel and Herculite XRV Ultra (HXU). Human enamel was obtained lower surface roughness values brushed with toothpaste compared with distilled water. Evaluation of the surface roughness of control groups using the AFM revealed no statistically significant difference between the groups, but significant differences were found using a profilometer. The use of abrasive whitening toothpaste containing blue covarine and the number of brushing cycles affect the surface properties of human enamel and the restorative material, and also, the clinical success of the restoration. Toothbrushing for 30,000 cycles increased the surface roughness of all materials. The type of toothbrushing solution partially has affected surface roughness.

A Comparative Evaluation of Nanohydroxyapatite-Enriched Hydrogen Peroxide Home Bleaching System on Color, Hardness and Microstructure of Dental Enamel

This study aimed to evaluate two hydrogen peroxide (HP)-based at-home bleaching systems in order to analyze whether nano-hydroxyapatite (nHA) addition may represent a reliable and safe solution for tooth whitening without altering dental microstructure and hardness. Human third molars (N = 15) were treated with two bleaching agents, one containing 6%HP (6HP) and the other 6% HP nHA-enriched (6HP-nHA) with average particle diameter ranging from 5-20 nm. Their effects on enamel were assessed using a spectrophotometer, Vickers microhardness (VMH) test and Scanning Electron Microscopy (SEM), comparing the treated groups with the non-treated control group (CTR). Color analysis revealed improvement in whiteness in both groups compared to CTR. VMH test results showed no differences among the groups. SEM analysis highlighted no evident changes in the enamel microstructure of tested groups compared to CTR. At high magnification, in 6HP group, a slight increase in irregularities of enamel surface morphology was observed, while 6HP-nHA group displayed removal of the aprismatic layer but preservation of the intact prismatic structure. These results suggest that the 6HP-nHA agent may be recommended to provide reliable whitening treatment, without damaging the enamel micromorphology and hardness.