Resurfacing arthroplasty of the hip in osteopetrosis

Challenges of Hip and Knee Arthroplasty in Patients With Osteopetrosis

Osteopetrosis is a rare metabolic bone disease, characterized by dysfunction of osteoclasts, resulting in increased bone density and brittleness leading to pathological fractures and bone deformities. Hip and knee osteoarthritis (OA) are common long-term complications in patients with osteopetrosis. Joint arthroplasty surgery remains an effective and recommended treatment for these patients with an end-stage OA because it provides favorable outcomes. However, in osteopetrosis, joint arthroplasty surgery carries an increased risk of complications, and specific preoperative and perioperative considerations are required to deal with the technical challenges related to the disease. The aim of this article was to review some of the key aspects of osteopetrosis, provide technical recommendations, and answer clinically relevant questions related to hip and knee arthroplasty surgery.

The Treatment of Subtrochanteric Fracture with Reversed Contralateral Distal Femoral Locking Compression Plate (DF-LCP) Using a Progressive and Intermittent Drilling Procedure in Three Osteopetrosis Patients

OBJECTIVE

To describe the application of reversed contralateral distal femoral locking compression plate (DF-LCP) inserted through a progressive and intermittent drilling procedure in the treatment of osteopetrotic subtrochanteric fracture (OSF).

METHODS

Three patients (one male and two females with an average age of 45.33 ± 11.09 years) with OSF hospitalized between September 2015 and September 2020, were included in this present study. Lateral approach was applied in all patients who accepted open reduction and internal fixation (ORIF) with a reversed contralateral DF-LCP inserted through a progressive and intermittent drilling procedure. The operation time and intraoperative blood loss were recorded to evaluate the efficiency of this surgical method. Physical examination and imaging examination of the fracture site were used to evaluate the fracture union status, the position and stability of the implant, and the alignment of the injured limb at 1, 3, 6, and 12 months after operation, then a subsequent visit was conducted at least once a year. Harris Hip Score (HHS) was used to evaluate the hip joint function at 6 and 12 months after operation.

RESULTS

The average operation time was 140 ± 21.60 min (110, 160, and 150 min); The average intraoperative blood loss was about 333.33 ± 23.57 ml (300, 350, and 350 ml). The average follow-up time was 22.33 ± 7.41 months (29, 26, and 12 months). All patients achieved bone union with an average time of 6.67 ± 0.94 months (6, 8, and 6 months). At the time of 6 months after operation, case 1 and 3 were almost pain-free and could walk with full weight bearing while case 2 could walk only with partial weight bearing using a crutch. The HHS scores of cases 1, 2, and 3 were 84/100, 74/100, and 92/100, respectively. At the follow-up at 12 months after operation, the HHS score improved to 91/100, 81/100, and 96/100, respectively. The contralateral incomplete old subtrochanteric fracture was deteriorated in case 1 at 26 months after operation. After 3 months of limited weight bearing using a crutch, bone union was verified in radiograph imaging. Fresh contralateral subtrochanteric fracture occurred in case 2 at 26 months after operation, which was treated using a similar surgical approach, and its clinical outcome is under follow-up. Moreover, no perioperative complications including operation-related death, vascular/nerve injury, deep venous thrombosis, pulmonary embolism, and incision infection, and long-term complications involving malunion, nonunion, implant failure, ankylosis, heterotopic ossification, osteonecrosis, and osteomyelitis were identified.

CONCLUSION

The application of reversed contralateral DF-LCP in OSF is practicable and reliable. Progressive and intermittent drilling is a safe and efficient method for implant insertion in this complicated situation.

Bilateral Posterior-Stabilized Total Knee Arthroplasty in a Patient With Osteopetrosis and Literature Review

We present a case report of a patient with osteopetrosis and refractory bilateral knees osteoarthritis who underwent bilateral total knee arthroplasties (TKAs). After conservative management has failed, surgical treatment with arthroplasty is an excellent alternative with satisfactory outcomes. TKA in patients with osteopetrosis has only been described in 6 other case studies, none of which underwent bilateral TKA. To perform this procedure, additional attention should be directed toward the presurgical planning because of the amplified difficulty of the procedure and the altered bone biology that increases the risks of intraoperative fractures and markedly extends the time of surgery. This report describes a case of osteopetrosis with refractory osteoarthritis managed with bilateral TKA, the surgical technique and special considerations, complications, and future recommendations.

Guided growth for valgus deformity correction of knees in a girl with osteopetrosis: a case report

Autosomal dominant osteopetrosis (Albers-Schönberg disease) classically displays the radiographic signs of osteosclerosis. The main ADO complications involve the skeleton: low-impact bone fractures, scoliosis and hip osteoarthritis. Management of osteopetrosis-related orthopedic problems is a surgical challenge due to increased bone density. The healing process is very slow in these patients because of bone remodeling defects related to osteoblast function failure. In case of bone deformities, a realignment method should be appropriated to osteopetrosis conditions. This article presents a case report of operative treatment of an 11-year-old girl affected with ADO, who underwent a simultaneous valgus knee deformity correction of both limbs with medial eight-plate epiphysiodesis. Simultaneous correction of valgus deformity on both limbs using an extraperiosteal tension plate technique for medial tibial hemiepiphysiodesis was performed in a girl of 11.5 years old with autosomal dominant osteopetrosis. The treatment duration from surgery to complete deformity correction and removal of plates was 18 months. The final aMPTA was 86° on the right side and 85° on the left side. The correction rate was 0.61°/month (right tibia) and 0.67°/month (left tibia). The MAD correction rate was evaluated as 1.5 mm/month for the right limb and 1.6 mm/month for the left limb. At the moment of plate removal, one screw was broken because of tight fixation in osteopetrotic bone. But it did not compromise the final result. The latest follow-up visit at the age of 14 years 6 months revealed excellent realignment without any deformity relapse. There was no any functional impairment. We consider the guided growth by tension band technique as very interesting and promising solution for treatment of pediatric angular deformity in patients with OP. This method allows to avoid osteotomy and related important risk of delayed union or nonunion frequently observed in osteopetrosis.

Level of evidence: Level IV.

Case report: A 10 years follow-up of periprosthetic femoral fracture after total hip arthroplasty in osteopetrosis

Osteopetrosis is an inherited disorder characterized by increased bone density and brittle bone quality. Degenerative changes often occur after the age of 40 in patients with osteopetrosis. Operative intervention is the primary treatment option if the clinical manifestation of secondary osteoarthritis is severe. A 44-year-old male suffering autosomal dominant osteopetrosis and progressive unilateral hip osteoarthritis required a total hip arthroplasty. However, there were several technical challenges associated with this procedure including creating a femoral medullary canal and developing a Vancouver type B2 periprosthetic femoral fracture postoperatively. To afford some experience for the management of similar cases, we here present our technical solutions to these problems.

Total Hip and Knee arthroplasty in a patient with osteopetrosis: a case report and review of the literature

Background

Osteopetrosis is an uncommon, inherited disease, characterized by osteosclerosis, obliteration of the medullary canal, calcified cartilage and brittle bone due to impaired osteoclast resorption. Osteoarthritis is common in patients with osteopetrosis. If the patient has pain and dysfunction, total joint arthroplasty is often the treatment of choice but presents many intraoperative and postoperative challenges. Few studies have presented both Total hip arthroplasty (THA) and Total knee arthroplasty (TKA) in one patient. This article describes a case of left hip osteoarthritis and right knee osteoarthritis in a patient with osteopetrosis. We performed THA and TKA in a 59-year-old osteopetrotic patient with painful osteoarthritis in the left hip and right knee.

Case presentation

A 59-years-old female with osteopetrosis was referred to our department because of a history of left hip pain and bilateral, right greater-than-left, knee pain with activity limitation for 13 years. She had no fracture history. In our hospital the patient underwent THA in the left hip firstly. Six months later, we performed TKA of the right knee. At 15-months follow-up, the components were in good position, and the patient could walk freely and perform activities of daily living with no pain.

Conclusions

This case report demonstrates that total joint arthroplasty is an effective treatment for painful hip and knee osteoarthritis in patients with osteopetrosis.

Simple reproducible technique in treatment for osteopetrotic fractures

Osteopetrosis is a rare skeletal condition first described by German radiologist Heinrich Albers-Schonberg. The most important technical difficulty is drilling due to hard bone in patients with osteopetrosis; recommendations have been made to use high-speed electric drill bits. But, the unavailability of this special drill bit in most of the centres makes the job more difficult. The study was conducted from 2009 to 2012; the cases are selected from Outpatients Department of Postgraduate Institute of Medical Education and Research. The patients were in the age group of 10-50 years with a mean age of 26 years. Five cases were included in the study: four patients had subtrochanteric fractures, and one had segmental fracture of the humerus. Open reduction and internal fixation was done in all the fractures using metal-cutting drill bit. The use of metal-cutting drill bit in osteopetrosis not only made our job easy but also prevented thermal necrosis of the bone to a large extent. The union rate was 100 % in our series, and there was no infection in any of our cases. In the treatment for fractures in osteopetrosis, the use of a metal-cutting drill bit along with careful attention to drilling technique can help avoid bit breakage and thermal bone injury that may produce ring sequestrum or destroy the already scant osteogenic cells.

Total knee arthroplasty in osteopetrosis using patient-specific instrumentation

Osteopetrosis is an uncommon endocrine disease characterized by defective osteoclast resorption of bones. This causes a hard, sclerotic, and brittle bone throughout the skeleton. Fractures and unforgiving subchondral bone are common in this condition, both of which can lead to osteoarthritis. Total knee arthroplasty is often the treatment of choice but presents challenges due to the hard and sclerotic bone present throughout the metaphysis and diaphysis of the femur and the tibia. We present a case of knee osteoarthritis in a patient with osteopetrosis who underwent total knee arthroplasty using patient-specific instrumentation. This technique eliminates intramedullary alignment and minimizes drilling, reaming, and saw passes, making it attractive in the setting of diseases such as osteopetrosis to decrease operative time and potential complications.

Successful staged hip replacement in septic hip osteoarthritis in osteopetrosis: a case report

BACKGROUND

Osteopetrosis is a rare, inherited, bone disorder, characterized by osteosclerosis, obliteration of the medullary cavity and calcified cartilage. The autosomal dominant form is compatible with a normal life span, although fractures often result from minimal trauma, due to the pathologic nature of bone. Osteomyelitis is common in patients with osteopetrosis because of a reduced resistance to infection, attributed to the lack of marrow vascularity and impairment of white cell function. Only one case of osteomyelitis of the proximal third of the femur has been previously reported, treated with several repeated debridements and finally with femoral head resection. Here we present for the first time a case of a staged implant of a cementless total hip prosthesis for the treatment of a septic hip in femoral neck nonunion in osteopetrosis.

CASE PRESENTATION

A 36-years-old woman, affected by autosomal dominant osteopetrosis was referred to our department because of a septic hip arthritis associated with femoral neck septic non-union, with draining fistulas. The infection occurred early after a plate osteosynthesis for a closed perthrocanteric fracture of the femur and persisted in spite of osteosynthesis removal, surgical debridement and external fixation. In our hospital the patient underwent accurate debridement, femoral head and greater trochanter resection, preparation of the diaphyseal intramedullary canal and implant of an antibiotic-loaded cement spacer. The spacer was exchanged after one month, due to infection recurrence and four months later, a cementless total hip arthroplasty was implanted, with no clinical and laboratory signs of infection recurrence at two years follow-up.

CONCLUSIONS

In case of hip septic arthritis and proximal femur septic non-union, femoral head resection may not be the only option available and staged total hip arthroplasty can be considered.

Incidence and significance of femoral neck narrowing in the first 500 Conserve® Plus series of hip resurfacing cases: a clinical and histologic study

Narrowing of the femoral neck after metal-on-metal hip resurfacing arthoplasty has been reported as a common radiologic feature, although its significance is still unknown. This study reports the presence and significance of neck narrowing in the first 500 consecutive Conserve® Plus metal-on-metal hip resurfacings in 431 patients.

Benefits of thin-shelled acetabular components for metal-on-metal hip resurfacing arthroplasty

The theoretical advantage of using thinner acetabular components in hip resurfacing has not yet been clinically verified. Our purpose was to test the hypothesis of bone conservation and assess the effects of using a thinner acetabular component on hip biomechanics and clinical outcome. We compared the bone conservation, biomechanical results, and functional outcomes between hips in 35 patients who received bilateral metal-on-metal resurfacing arthroplasties with acetabular components of 5 mm thickness on one side and 3.5 mm thickness on the other. Acetabular abduction angle and acetabular anteversion were measured using Ein-Bild-Röentgen-Analysis software. Medial acetabular wall thickness and position of the hip center of rotation were measured using Image J software. The change in position of the hip center of rotation was minimal and did not reach significance. Thin-shelled components showed greater bone conservation on the acetabular side measured by an increase in the medial acetabular wall thickness. Bone conservation on the femoral side was achieved as well with thin shells. Range of motion, pain scores, and complication rates were comparable. No appreciable difference was found in bone-cup radiographic appearance between the two types of components. These data suggest that patients can experience good clinical outcomes for resurfacing with either thin or thick-shelled acetabular components. However, thin-shelled components preserve acetabular bone stock and allow the use of a larger femoral component. The use of thinner acetabular components is an improvement in bone conservation for a hip resurfacing design.

Customised femoral stems in osteopetrosis and the development of a guiding system for the preparation of an intramedullary cavity

Traditional techniques for the insertion of femoral stems in arthroplasty of the hip in osteopetrosis carry a considerable risk of penetration of the femoral cortex and intra-operative fractures, due to obliteration of the intramedullary cavity and greatly increased stiffness and brittleness of the bone. In order to reduce the risk of such complications we manufactured a customised stem and a computer-based guiding device for the preparation of a cavity within the proximal femur. This system was used successfully in three hips in two patients. We describe the system and the operative technique.

"Challenges in the management of fractures in osteopetrosis"! Review of literature and technical tips learned from long-term management of seven patients

Osteopetrosis is a metabolic disorder with diminished bone resorption due to osteoclastic abnormality. It causes hard and brittle marble bone which fractures easily. Most of these fractures can be treated conservatively. Operative intervention when needed presents with unique technical challenges. While osteopetrotic hard bone may be penetrated with a drill bit; high friction and prolonged drilling can make the drill bit blunt. The heat generated can cause bone necrosis and break the drill bit. Besides this, brittleness of bones can cause intra-operative fractures. Due to the difficulties during the operation, the operative time may be prolonged thereby increasing the risk of post-operative infection. There is also a risk of delay in consolidation and non-union owning to impaired bone remodelling. We present an account of seven patients treated for various fracture related problems occurring throughout their life due to this disease. Difficulties encountered during their treatment prompted us to present some general management principles.

[Hip resurfacing: current state of knowledge]

SUMMARY

The tribologic quality of metal-on-metal bearings has enabled a second generation of hip resurfacing techniques. Compared with a conventional hip prosthesis, this type of arthroplasty has many advantages: sparing femoral (and acetabular) bone stock, preservation of hip joint biomechanics (femoral offset, leg length), better recovery for high-level sports activities, easier revision, less risk of dislocation, less risk of extension to the shaft in the event of osteolysis. Hip resurfacing can thus be considered as true "minimally invasive bone surgery". There are however specific complications of resurfacing, including femoral neck fracture and collapse of the femoral head. All of the conventional approaches can be used for hip resurfacing procedures, but a precise operative technique is mandatory. The key to success is a proper position of the femoral piece. Certain biomechanical rules for implantation are required in order to limit the cam effect, spare femoral bone, and maintain harmonious loading. Hip resurfacing can be indicated for young and/or active subjects for whom restoration of hip biomechanics offers a real advantage over conventional hip arthroplasty. The mid-term results have been encouraging, both clinically and radiographically.

Orthopaedic management of the patient with osteopetrosis

Osteopetrosis is a sclerosing bone dysplasia characterized by hard, brittle bone secondary to dysfunctional osteoclast resorption. The three main forms are malignant autosomal recessive, intermediate autosomal recessive, and benign autosomal recessive. These various clinical manifestations ultimately are caused by genetic mutations affecting acidification of Howship's lacuna. Common radiographic features include a generalized sclerosis, rugger jersey spine, and endobone formation. Medical problems include cranial nerve palsies and pancytopenia. Because cortical and cancellous bone thickness is increased, medullary canals and cranial nerve foramina are overgrown with bone. Patients typically present with such orthopaedic problems as frequent fractures, coxa vara, osteoarthritis, and osteomyelitis. Management with open reduction and internal fixation and with intramedullary fixation of fractures is difficult but possible. Reported results of total hip and total knee arthroplasties are excellent.