Anatomical study of the placement of proximal oblique locking screws in intramedullary tibial nailing

Characteristics of Iatrogenic Nerve Injury from Orthopedic Surgery Correlate with Time to Subspecialty Presentation

There is no current literature examining iatrogenic nerve injury resulting from orthopedic procedures across subspecialties and anatomic areas. This study uses a single peripheral nerve surgeon’s experience to investigate the variable time to presentation of adult patients with iatrogenic nerve injury after orthopedic surgery.

Pearls and Pitfalls With Intramedullary Nailing of Proximal Tibia Fractures

Intramedullary fixation of proximal tibia fractures remains a challenging surgical technique, with malalignment reported as high as 84%. The pull from the extensor mechanism, the hamstring and iliotibial band, in addition to the lack of endosteal fit from the nail, has made surgical fixation of these fractures difficult. Commonly held principles to reduce angular deformity include ensuring adequate imaging, obtaining an optimal start and trajectory for the implant, and obtaining and maintaining a reduction throughout the duration of the procedure. Some adjunctive techniques to assist in the application of these principles include use of a semiextended technique, clamping, blocking screws/wires, and unicortical plates. Understanding the challenges involved in intramedullary nailing of proximal tibia fractures and considering a wide array of techniques in the orthopaedic surgeon's armamentarium to combat these challenges is important.

Oblique proximal locking screw in tibial fracture intramedullary nailing: a clinical imaging study of proximity to common peroneal nerve

Intramedullary nailing (IMN) is the treatment of choice in the surgical management of most tibia shaft fractures. The aim of the study was to evaluate the proximity of the common peroneal nerve (CPN) to the oblique proximal locking screw inserted from the anteromedial to the posterolateral direction. We identified all the patients who underwent the IMN of the tibia between 2008 and 2018. Patients who underwent post-operative computed tomography for any reason were identified. Patients were included if the CPN was visible on the axial slices, the proximal oblique locking screw was used, or the line of the drilling could be reconstructed. Twenty-nine patients met the inclusion criteria. The median length of the intramedullary nail was 345 mm. The median nail diameter was 10 mm. The median number of proximal interlocking screws was 2. All scans were reviewed by the musculoskeletal radiologist for verifying the visibility and marking of the CPN. The mean screw trajectory angle to the CPN was 9° (± 9°). Most of the drilling trajectories passed posterior to the CPN (79%). The depth of the intramedullary nail was on average - 8 mm (± 10 mm). A negative correlation was observed between the depth of the nail and the distance from the CPN (P < 0.001). During the insertion of the oblique proximal locking screw from the anteromedial to the posterolateral direction, the CPN is potentially at risk if the drill is allowed to plunge or an incorrectly long screw is used. Sinking the nail provides a better margin of safety.

Safe surgical technique: intramedullary nail fixation of tibial shaft fractures

Statically locked, reamed intramedullary nailing remains the standard treatment for displaced tibial shaft fractures. Establishing an appropriate starting point is a crucial part of the surgical procedure. Recently, suprapatellar nailing in the semi-extended position has been suggested as a safe and effective surgical technique. Numerous reduction techiques are available to achieve an anatomic fracture alignment and the treating surgeon should be familiar with these maneuvers. Open reduction techniques should be considered if anatomic fracture alignment cannot be achieved by closed means. Favorable union rates above 90 % can be achieved by both reamed and unreamed intramedullary nailing. Despite favorable union rates, patients continue to have functional long-term impairments. In particular, anterior knee pain remains a common complaint following intramedullary tibial nailing. Malrotation remains a commonly reported complication after tibial nailing. The effect of postoperative tibial malalignment on the clinical and radiographic outcome requires further investigation.

Peroneal nerve: Normal anatomy and pathologic findings on routine MRI of the knee

Background

Peroneal nerve lesions are not common and are often exclusively assessed clinically and electromyographically.

Methods

On a routine MR examination without dedicated MR-neurography sequences the peroneal nerve can readily be assessed. Axial T1-weighted sequences are especially helpful as they allow a good differentiation between the nerve and the surrounding fat.

Results

The purpose of this article is to review the normal anatomy and pathologic conditions of the peroneal nerve around the knee.

Conclusion

In the first part the variable anatomy of the peroneal nerve around the knee will be emphasized, followed by a discussion of the clinical findings of peroneal neuropathy and general MR signs of denervation. Six anatomical features may predispose to peroneal neuropathy: paucity of epineural tissue, biceps femoris tunnel, bifurcation level, superficial course around the fibula, fibular tunnel and finally the additional nerve branches. In the second part we discuss the different pathologic conditions: accidental and surgical trauma, and intraneural and extraneural compressive lesions.

Teaching Points

• Six anatomical features contribute to the vulnerability of the peroneal nerve around the knee.

• MR signs of muscle denervation within the anterior compartment are important secondary signs for evaluation of the peroneal nerve.

• The most common lesions of the peroneal nerve are traumatic or compressive.

• Intraneural ganglia originate from the proximal tibiofibular joint.

• Axial T1-weighted images are the best sequence to visualise the peroneal nerve on routine MRI.

[Intramedullary nailing of proximal tibial fractures. Complications and risk factors]

INTRODUCTION

We performed a consecutive study on patients with proximal tibial fractures without joint participation to determine the early clinical and radiological outcome.

PATIENTS

From January 2000 to December 2005, 22 fractures of the proximal and proximal diaphyseal tibia without joint participation were operated on using the new tibia nail. A total of 18 patients (82%) completed full follow-up after 6 weeks and 3 and 6 months.

RESULTS

Two primary and one secondary malalignment were observed Two of them were initially polytraumatised. Furthermore, two patients developed a delayed union, and one non-union occurred. Risk factors for limited bony consolidation were smoking and an open fracture. Screw or nail breakage did not occur, and no infection was observed.

Factors influencing interlocking screw failure in unreamed small diameter nails--a biomechanical study using a distal tibia fracture model

BACKGROUND

Unreamed tibia nails with small diameters are increasingly used for fracture fixation. However, little is known about the fatigue strength of proximal and distal interlocking screws in those nails. To date, no data are available reporting on mechanical differences of solid compared to cannulated tibial nails. The aim of this study was to assess the fatigue strength of proximal and distal interlocking screws of solid and cannulated small diameter tibia nails.

METHODS

We created a distal tibia fracture model (AO/OTA 43 A3) using 16 Sawbones. After fracture stabilization with one of four different nail types (Expert Tibial Nail, VersaNail, T2 Tibial Nailing System, Connex), mechanical testing was performed in three loading series (40,000 cycles each) with incremental loads. Timing and type of interlocking screw failure were assessed.

FINDINGS

Interlocking screw failure was observed significantly earlier (after a mean interval of 57,042 cycles) in cannulated tibial nails (VersaNail, T2) compared to solid nails (after a mean interval of 88,415 cycles; P < 0.001). Proximal interlocking screw failure was recorded if oblique screws were used proximally (VersaNail, T2, Connex). No distal interlocking screw failure was recorded in the Connex nail. Two- and three-part fractures of proximal or distal interlocking screws were observed in all specimen.

INTERPRETATION

Proximal and distal interlocking screw failure has to be considered in small diameter nails in case of delayed fracture healing. To support our results, further experimental studies and clinical series are necessary.

The risk of iatrogenic injury to the deep peroneal nerve in minimally invasive osteosynthesis of the tibia with the less invasive stabilisation system

Percutaneous stabilisation of tibial fractures by locking plates has become an accepted form of osteosynthesis. A potential disadvantage of this technique is the risk of damage to the neurovascular bundles in the anterior and peroneal compartments. Our aim in this anatomical study was to examine the relationship of the deep peroneal nerve to a percutaneously-inserted Less Invasive Stabilisation System tibial plate in the lower limbs of 18 cadavers. Screws were inserted through stab incisions. The neurovascular bundle was dissected to reveal its relationship to the plate and screws.

In all cases, the deep peroneal nerve was in direct contact with the plate between the 11th and the 13th holes. In ten specimens the nerve crossed superficial to the plate, in six it was interposed between the plate and the bone and in the remaining two specimens it coursed at the edge of the plate.

Percutaneous insertion of plates with more than ten holes is not recommended because of the risk of injury to the neurovascular structures. When longer plates are required we suggest distal exposure so that the neurovascular bundle may be displayed and protected.