Avoiding patellar complications in total knee replacement

Does Patellar Denervation with Electrocautery Benefits for Total Knee Arthroplasty without Patellar Resurfacing: A Meta-analysis of Randomized Controlled Trails

To investigate the effects of patellar denervation (PD) and non-patellar denervation (NPD) after primary total knee arthroplasty (TKA) without patellar resurfacing, this study conducted systematic electronic searches in November 2023 using PubMed, Embase, Web of Science, Cochrane, and Scopus, adhering to Cochrane Collaboration recommendations. Only randomized controlled trials (RCTs) were included. Additionally, a manual search was performed to identify potentially eligible studies from the reference lists of review articles. Two researchers independently conducted literature reviews, data extraction, and risk of bias assessments. The outcome analysis encompassed the incidence of anterior knee pain (AKP), visual analogue scale (VAS), range of motion (ROM), American Knee Society Score (KSS), Oxford Knee Score (OKS), patellar score (PS), complications, and reoperations. Meta-analysis was executed using RevMan 5.3 software. To enhance the credibility of the study, TSA v0.9 software was utilized to perform power analysis on the overall efficacy of primary and secondary outcomes. Twelve studies involving 1745 patients (1587 knees) were included, with 852 undergoing PD and 893 undergoing NPD. Results indicated a superior reduction in AKP incidence in the PD group compared to the NPD group. Statistically significant differences were observed between PD and NPD in KSS, OKS, and PS. However, the upper limit of the 95% confidence interval for each outcome fell below the minimal clinically important difference (MCID). No significant differences were found in VAS and ROM between PD and NPD. Additionally, PD was not associated with an increased incidence of complications or reoperations. Within 12 months and beyond, PD was proven to be a beneficial intervention in reducing AKP following TKA without patellar resurfacing, achieved without an increase in complications or reoperations. Regarding KSS, OKS, and PS, the minimal advantage achievable through PD may not be clinically significant.

Widening of tibial resection boundaries increases the rate of femoral component valgus and internal rotation in functionally aligned TKA

PURPOSE

The purpose of this study was to investigate the influence of increasing the tibial boundaries in functional alignment on femoral component orientation in total knee arthroplasty (TKA).

METHODS

A retrospective review of a database of robotic-assisted TKAs using a digital joint tensioning device was performed (BalanceBot®; Corin). A total of 692 TKAs with correctable deformity were included. Functional alignment with a tibia-first balancing technique was simulated by performing an anatomic tibial resection to recreate the native medial proximal tibial angle within certain boundaries (A, 87-90°; B, 86-90°; C, 84-92°), while accounting for wear. After balancing the knee, the resulting amount of femoral component outliers in the coronal and axial plane was calculated for each group and correlated to the coronal plane alignment of the knee (CPAK) classification.

RESULTS

The proportion of knees with high femoral component varus (>96°) or valgus (<87°) alignment increased from 24.5% (n = 170) in group A to 26.5% (n = 183) in group B and 34.2% (n = 237) in group C (p < 0.05). Similarly, more knees with high femoral component external rotation (>6°) or internal rotation (>3°) were identified in group C (33.4%, n = 231) than in group B (23.7%, n = 164) and A (18.4%, n = 127) (p < 0.05). There was a statistically significant (p < 0.01) overall increase in knees with both femoral component valgus <87° and internal rotation >3° from group A (4.0%, n = 28) to B (7.7%, n = 53) and C (15.8%, n = 109), with CPAK type I and II showing a 12.9- and 2.9-fold increase, respectively.

CONCLUSION

Extending the tibial boundaries when using functional alignment with a tibia-first balancing technique in TKA leads to a statistically significant higher percentage of knees with a valgus lateral distal femoral angle < 87° and >3° internal rotation of the femoral component, especially in CPAK type I and II.

LEVEL OF EVIDENCE

Level IV.

Sagittal Patellar Offset Ratio Can Be a Predictor of Anterior Knee Pain after Primary Total Knee Arthroplasty without Patella Resurfacing

BACKGROUND

Anterior knee pain (AKP) is an issue that persists even after successful total knee arthroplasty (TKA). In some patients, reasons for AKP occurrence are known, but it is unexplained in some others despite the patellofemoral joint being thought to be the main focus of pain. We investigated the relationship between unexplained AKP and the patellofemoral joint in the sagittal plane after primary TKA.

METHODS

We evaluated 372 knees of 317 patients retrospectively, who had completed a minimum 24-month follow-up. We divided them into two groups according to the presence of AKP. Sagittal patellar offset ratio (SPOR), anterior femoral offset ratio (AFOR), and Insall-Salvati ratio (ISR) were measured on lateral X-rays. Clinical outcomes were evaluated using the Oxford knee score (OKS) and WOMAC pre-and postoperatively, and AKP was evaluated using a visual analog scale (VAS) postoperatively.

RESULTS

Between non-AKP and AKP groups, SPOR (p < 0.001) and AFOR (p = 0.03) were significantly different but not ISR (p = 0.89). SPOR and AFOR were found to be two independent risk factors that may predict the likelihood of AKP. Receiver operating characteristic (ROC) analysis revealed that AFOR is a poor value, whereas SPOR is a reasonable predictive value. No correlation between SPOR and postoperative OKS (p = 0.92) and WOMAC (p = 0.25) and no correlation between AFOR and postoperative OKS (p = 0.44) and WOMAC (p = 0.58) were found.

CONCLUSION

We found that SPOR is a good predictive tool with a cutoff value of 46.4% and 91.5% sensitivity for AKP and its increased ratio increases the probability of AKP following TKA. Considering that the patellar offset will not change, especially in patients without patella resurfacing, care should be taken not to increase the anterior femoral offset.

Patellar resurfacing versus retention in cruciate-retaining and posterior-stabilized total knee arthroplasty

Aims

This systematic review and meta-analysis aimed to compare the influence of patellar resurfacing following cruciate-retaining (CR) and posterior-stabilized (PS) total knee arthroplasty (TKA) on the incidence of anterior knee pain, knee-specific patient-reported outcome measures, complication rates, and reoperation rates.

Methods

A systematic review of MEDLINE, PubMed, and Google Scholar was performed to identify randomized controlled trials (RCTs) according to search criteria. Search terms used included: arthroplasty, replacement, knee (Mesh), TKA, prosthesis, patella, patellar resurfacing, and patellar retaining. RCTs that compared patellar resurfacing versus unresurfaced in primary TKA were included for further analysis. Studies were evaluated using the Scottish Intercollegiate Guidelines Network assessment tool for quality and minimization of bias. Data were synthesized and meta-analysis performed.

Results

There were 4,135 TKAs (2,068 resurfaced and 2,027 unresurfaced) identified in 35 separate cohorts from 33 peer-reviewed studies. Anterior knee pain rates were significantly higher in unresurfaced knees overall (odds ratio (OR) 1.84; 95% confidence interval (CI) 1.20 to 2.83; p = 0.006) but more specifically associated with CR implants (OR 1.95; 95% CI 1.0 to 3.52; p = 0.030). There was a significantly better Knee Society function score (mean difference (MD) -1.98; 95% CI -1.1 to -2.84; p < 0.001) and Oxford Knee Score (MD -2.24; 95% CI -0.07 to -4.41; p = 0.040) for PS implants when patellar resurfacing was performed, but these differences did not exceed the minimal clinically important difference for these scores. There were no significant differences in complication rates or infection rates according to implant design. There was an overall significantly higher reoperation rate for unresurfaced TKA (OR 1.46 (95% CI 1.04 to 2.06); p = 0.030) but there was no difference between PS or CR TKA.

Conclusion

Patellar resurfacing, when performed with CR implants, resulted in lower rates of anterior knee pain and, when used with a PS implant, yielded better knee-specific functional outcomes. Patellar resurfacing was associated with a lower risk of reoperation overall, but implant type did not influence this.

Effects of the Femoral Nerve Block and Adductor Canal Block on Tourniquet Response and Postoperative Analgesia in Total Knee Arthroplasty

Tourniquet has emerged as an important role in surgical procedures, sixty patients undergoing elective total knee arthroplasty are randomly divided into the nerve block group and adductor duct block group in this paper. The changes of mean arterial pressure (MAP) and heart rate (HR) at different time points during operation, the changes of VAS scores at resting pain and exercise pain, and the changes of quadriceps femur muscle strength at different time points after operation are observed in 2 groups. The experimental results show that compared with adductor duct block, femoral nerve block can better relieve the intraoperative tourniquet reaction without affecting the postoperative analgesic effect and the muscle strength of quadriceps femurs.

Patella Strength Characteristics in Cemented vs Press-fit Implants: A Biomechanical Analysis of Initial Stability

Background

Patellar resurfacing is routinely performed during total knee arthroplasty to reduce pain associated with patellofemoral osteoarthritis. With 3-dimensional ingrowth materials readily available, the present study aimed to evaluate if cemented polyethylene (CP) patellar buttons conferred higher ultimate load to failure than press-fit metal-backed (PF) buttons in axial compression.

Material and methods

Ten matched cadaveric and 20 composite patellae were resurfaced and implanted with either a PF or CP button. Biomechanical testing using an MTS machine was performed to measure the force required to generate a periprosthetic patella fracture. Mean load to failure and load to failure per 1-mm patellar thickness were compared with a paired and independent samples Students’ t-test for the cadaveric and composite patellae, respectively.

Results

The average load to failure for the matched cadaveric patellae with PF implants was significantly lower than that for patellae with CP buttons (4082.05 N vs 5898.37 N, P = .045). The average load to failure for composite patella with PF implants was significantly higher than that for composite patellae with CP implants (6004.09 N vs 4551.40 N, P = .001). The mean load to failure per 1-mm patellar thickness was also significantly higher for composite patellae with PF implants (263.80 N/mm vs 200.37 N/mm, P = .001).

Conclusion

Cadaveric patellae with cemented implants had a significantly higher ultimate load to failure in axial compression than press-fit patella. However, this result was reversed in the composite model. Exploration of biological and composite model properties could provide further insight into patellar implant selection during total knee arthroplasty.

Management of the Patella During Total Knee Arthroplasty

»

The optimal management of the patella during total knee arthroplasty (TKA) remains a controversial topic with no consensus.

»

Patellar management techniques during TKA include patellar retention or resurfacing with or without patellaplasty, as well as circumferential denervation and partial lateral facetectomy (PLF).

»

Special considerations such as patient age, etiology of disease, implant design, and surgeon preference should be accounted for when determining optimal management.

»

We recommend that most patellae be circumferentially denervated, regardless of whether they are resurfaced, as the potential benefits outweigh the small associated risks.

»

Evidence demonstrates improved functional outcomes with the addition of PLF to nonresurfaced patellae. There is currently a paucity of evidence of this technique with respect to resurfaced patellae.

»

Patellar resurfacing adds additional costs and health-care resources that should be considered in the decision-making process.

Has the modern design of Attune total knee replacement improved outcome in patients with isolated patellofemoral arthritis?

INTRODUCTION AND AIM

Modern knee replacements aim to improve patient function in arthritis affecting different compartments of the knee. This study evaluates the Patient Reported Outcome Measure (PROM) and functional outcome of a modern total knee replacement (Attune, DePuy) in patients with isolated patellofemoral arthritis.

METHODS

A total of 50 consecutive patients with isolated unilateral patellofemoral arthritis having had Attune total knee replacements at a single institution between 2010 and 2016 were prospectively studied. Five patients who developed symptoms on the opposite side during the study and two patients lost to follow-up were excluded. One patient needed early revision for loosening, leaving a total of 42 patients to be followed up over a period of 4 years. The Oxford Knee score (OKS) and Knee Injury and Osteoarthritis Outcome Score (KOOS) recorded pre-operatively and at follow-up was compared. A Functional assessment at around 8 months after operation was undertaken.

RESULTS

At average follow-up of 24 months the mean OKS score improved by 15 points and the KOOS score improved by 20 points. Final KOOS sub-score for Pain was 80, Symptom 80, and ADL 82, Sports & Recreation 32 and QOL 60. Functional assessment at mean 8 months showed that a significant number of patients were able to Kneel (50%); Sit cross legged (23%); sit on their heel (23%) and were able do a single leg dip test (86%).

CONCLUSION

This unique study of a modern design total knee replacement (Attune) in patients with isolated unilateral patellofemoral arthritis shows good PROM scores at 2 years and good functional assessment results at 8 months. The PROM scores are marginally better than the published results with Attune's predecessor, in a similar cohort of patients, but falls short of the published results of patellofemoral replacement implants. Large randomised comparative studies between traditional and the modern implant design is recommended to answer the question if design modification has influenced clinical outcome in patients with patellofemoral arthritis.

Early Patellofemoral Function of Medial Pivot Prostheses Compared with Posterior-Stabilized Prostheses for Unilateral Total Knee Arthroplasty

Objective

To systematically evaluate the patellofemoral joint design of medial pivot prosthesis, which incorporates a variety of “patella‐friendly” design features, by comparing clinical and radiographic results with another prosthesis.

Methods

All consecutive patients who underwent unilateral total knee arthroplasty (TKA) with medial pivot prosthesis (Group MP, 126 cases) between September 2016 and April 2018 were enrolled in this retrospective study. For each patient reviewed, a control patient was matched, according to age, gender, side, body mass index (BMI), preoperative range of motion (ROM), and operating period, who had received primary unilateral TKA with a conventional posterior‐stabilized prosthesis at the same period as the study group (Group PS, 126 cases). All patients underwent at least 1‐year follow‐up. At the preoperative and final follow‐up periods, data on the Knee Society Score (KSS) score, WOMAC score, Kujala score, and ROM were collected. Merchant views were taken with the knee flexion at 30°, 60°, and 90° to measure patella shift and tilt. Preoperative posterior condylar angle (PCA) was also measured. Postoperative complications, including anterior knee pain, maltracking, patellar clunk or crepitus (PCC), were evaluated.

Results

There were no significant differences in the demographics or clinical characteristics between the two groups. No statistically significant difference was identified in the KSS total score, including knee score and function score, or in the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) score between the two groups after the operation. We found statistically significant differences in the postoperative Kujala scores and the ROMs between the two groups. The mean Kujala score in group MP was better than in group PS (MP 77.16 ± 3.80 vs PS 75.97 ± 4.06, P < 0.05), while the ROM in group PS was significantly higher than in group MP (MP 122.24° ± 4.45° vs PS 123.78° ± 6.05°, P < 0.05). Simultaneously, the preoperative/postoperative Kujala score improvement in group MP was observed to be significantly larger than in group PS (MP 27.82 ± 5.31 vs PS 26.17 ± 4.89, P < 0.05), but the average ROM improvement in group PS was significantly greater than in group MP (MP 19.00° ±9.90° vs PS 21.57° ± 9.62°). In the 90° Merchant view, the mean patella tilt of group MP was statistically smaller than that of group PS (MP 4.21° ± 1.62° vs PS 4.74° ± 1.95°, P < 0.05), and the average patella tilt change in group MP was significantly greater than in group PS (MP –3.8° ± 1.43° vs PS –3.23° ± 1.33°, P < 0.05). Preoperative PCA did not show significant differences between the two groups. Two cases of PCC and three cases of anterior knee pain were noted in group MP, and nine cases and six cases, respectively, were observed in group PS. The incidence of PCC was significantly lower in group MP (1.6% vs 7.1%, P < 0.05). There was no significant difference in follow‐up time between the two groups.

Conclusion

The medial pivot prosthesis could achieve satisfactory outcomes with better patellofemoral performance attributed to its “patella‐friendly” design characteristics compared to the conventional posterior‐stabilized prosthesis.

Effect of Patellar Denervation on Anterior Knee Pain and Knee Function in Total Knee Arthroplasty without Patellar Resurfacing: A Meta-Analysis of Randomized Controlled Trials

OBJECTIVE

The aim of the present study was to evaluate the effect of patellar denervation (PD) in preventing anterior knee pain (AKP) and improving knee function after total knee arthroplasty (TKA) without patellar resurfacing, and to help surgeons decide whether or not to use PD in TKA.

METHODS

The electronic databases of Pubmed, Embase, Cochrane, Web of Science, and Scopus were searched for all randomized controlled trials (RCT) comparing the outcomes of PD and no patellar denervation (NPD) in TKA without patellar resurfacing. Primary outcomes were incidence of AKP, visual analogue scale for pain (VAS), and patellar score (PS). Secondary outcomes were Knee Society Score (KSS), the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), the Oxford Knee Score (OKS), knee range of motion (ROM), and complications.

RESULTS

A total of nine RCT met the inclusion criteria. On meta-analysis, PD significantly reduced the incidence of AKP (odds ratio 0.49; 95% confidence interval [CI] 0.26 to 0.92), reduced the VAS (weighted mean difference [WMD] -0.57; 95% CI -1.02 to -0.11), and improved the WOMAC (WMD -4.63; 95% CI -6.49 to -2.77) and the ROM (WMD 9.60; 95% CI 0.39 to 18.81) during the follow-up within 12 months. In addition, PD improved the PS (WMD 1.01; 95% CI 0.65 to 1.38), KSS (WMD 1.12; 95% CI 0.10 to 2.14), and the WOMAC (WMD -1.41; 95% CI -2.74 to -0.08) during the follow-up after 12 months.

CONCLUSION

Patellar denervation could significantly reduce the VAS and the incidence of AKP in the early stages after TKA as well as improve the clinical outcomes in terms of the PS, the WOMAC, the KSS, and the ROM. This study demonstrates that PD is a safe and recommendable technique that could be routinely performed in TKA.

The effect of patellar facet angle on patellofemoral alignment and arthritis progression in posterior-stabilized total knee arthroplasty without patellar resurfacing

Background

The purpose of this study was to evaluate the effect of patellar facet angle on pre- and postoperative patellofemoral alignment and the progress of arthritis of the patellofemoral joint in posterior-stabilized total knee arthroplasty (PS TKA) without patellar resurfacing.

Methods

Patients who had a PS TKA for a varus osteoarthritic knee who were followed up for more than 2 years were included in this study. The radiologic and clinical outcomes were compared between 72 knees (group A) whose patellar facet angle was greater than 126° (> 126°) and 32 knees (group B) whose patellar facet angle was smaller than or equal to 126° (≤ 126°). For the radiologic assessment, the Kellgren-Lawrence grade, mechanical femorotibial angle, Insall-Salvati ratio, patellar tilt angle, patellar displacement and the osteosclerosis of the patellar ridge were evaluated. The range of motion (ROM) and patient-reported outcomes (the Knee Society knee score, the Knee Society function score, the Feller patellar score, and the Kujala patellofemoral score) were used for the clinical assessment.

Results

The preoperative patellar tilt angle was 9.8° (standard deviation [SD] 5.5) and 14.6° (SD 4.1) in group A and group B, respectively, a significant difference (p < 0.001). Other preoperative radiologic parameters and preoperative patient-reported outcomes and ROM showed no significant difference between the two groups (all parameters (p > 0.05). At the last-follow-up, 22 knees (30.6%) showed progression of osteosclerosis of the patellar ridge in group A and 13 knees (40.6%) showed progression of osteosclerosis in group B (p = 0.371). The postoperative radiologic and clinical outcomes showed no significant difference between the two groups (all parameters, p > 0.05).

Conclusions

Although a narrow patellar facet angle was related to an increase of lateral tilting of the patella, it showed no impact on the preoperative clinical assessment. The radiologic and clinical outcomes evaluated after the PS TKA showed no statistical difference according to the patellar shape. Although the patellar shape evaluated by the patellar facet angle can partially affect the preoperative patellofemoral alignment, this study result indicated insignificant clinical relevance of the patellar shape in the PS TKA.

Patellar osteolysis after total knee arthroplasty with patellar resurfacing: a potentially underappreciated problem

Osteolysis of the patella following total knee arthroplasty is both uncommon and poorly described in the literature. We describe 3 cases of total knee arthroplasty with patella resurfacing that later presented with anterior knee pain with patellar osteolysis without evidence of patellar implant failure: 2 males and 1 female patient, all with bilateral knee osteoarthritis. Osteolysis of the patella was identified radiographically between 2 and 16 years from the index procedure. We theorize that high pressures across the patella-femoral joint, in obese or muscular patients, may play a role in the formation of these patellar osteolytic lesions. We suspect that the prevalence of this phenomenon is under-recognized in the literature and may increase with longer term follow-up and awareness.

Long-Term Results of Patellar Bone-Grafting for Severe Patellar Bone Loss During Revision Total Knee Arthroplasty

BACKGROUND

There is no consensus on managing severe patellar bone loss after total knee arthroplasty. We previously described an initial series involving a novel technique of patellar bone-grafting with a short follow-up. The purpose of this study was to determine long-term survivorship and the radiographic and clinical results of patellar bone-grafting during revision total knee arthroplasty in a larger series with an extended follow-up.

METHODS

We identified 90 patients from a single institution who underwent 93 patellar bone-grafting procedures for severe patellar bone loss from 1997 to 2014. The mean age of the patients was 70 years, and 46% of patients were female. Forty-five knees (48%) underwent first-time revisions, and 19 knees (20%) had undergone a failed attempt at patellar resurfacings. Intraoperative patellar caliper thickness increased from a mean of 7 to 25 mm after patellar bone-grafting (p < 0.01). Radiographic review determined changes in patellar height, tracking, and remodeling. Knee Society scores (KSSs) were calculated. The mean follow-up was 8 years (range, 2 to 18 years). Kaplan-Meier methods determined survivorship free of any revision and any reoperation. Cox proportional hazards analysis determined predictive factors for failure.

RESULTS

Survivorship free of patellar revision was 96% at 10 years. Survivorship free of any revision was 84% at 10 years. Survivorship free of any reoperation was 78% at 10 years. Increasing patient age was the only protective factor against further patellar revision (hazard ratio, 0.95; p < 0.01). When comparing initial radiographs with final radiographs, patellar height decreased from 22 to 19 mm (p < 0.01), 80% compared with 59% of patellae articulated centrally in the trochlea (p = 0.01), and 32% compared with 77% had remodeling over the lateral femoral condyle (p < 0.01). Anterior knee pain decreased from 51% to 27% postoperatively (p = 0.01). The mean knee flexion improved from 101° to 108° (p = 0.03). The mean KSS improved from 50 to 85 points (p < 0.01).

CONCLUSIONS

Reliable long-term clinical results can be expected with patellar bone-grafting for severe patellar bone loss during revision total knee arthroplasty. Pain, range of motion, and other reported outcomes improve despite radiographic changes to patellar height, tracking, and remodeling. This technique is a durable and reliable option when standard patellar resurfacing is not possible.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Role of Anatomical Patella Replacement on Anterior Knee Pain

BACKGROUND

Anterior knee pain (AKP) remains a complex issue affecting patient satisfaction after total knee arthroplasty. Several radiographic parameters have been shown to be causative factors with various designs. The aim of this study is to evaluate the known radiographic parameters of AKP and clinical outcomes (ie, AKP) in the setting of a modern prosthesis with an anatomic patella button.

METHODS

Between July 2012 and December 2013, 90 total knee arthroplasties received 3 skyline views taken at 30°, 45°, and 60°. A patient-administered questionnaire was administered at 2-year follow-up to assess the incidence of AKP, painless noise, and satisfaction. Radiographs were analyzed for patellofemoral overstuffing, patellar tilt, and patellar displacement, and evaluated the patella resection angle.

RESULTS

On the patient-administered questionnaire, 10 (11.1%) patients reported AKP of a mild-to-moderate nature. Thirty-one had the best view at 30 Merchant views, 24 had best views at 45, and 35 had best views at 60. We found that patellar resection angle correlated with AKP (odds ratio 1.21, P = .044) and painless noise (odds ratio 1.22, P = .034). Patellar displacement and patellofemoral stuffing did not correlate with AKP or painless noise. No radiographic measurements correlated with changes in Knee Society Score pain or function scores or range of motion.

CONCLUSION

We found that a patellar resection angle correlated with the incidence of AKP and painless noise at 2-year follow-up. We failed to find any correlation with patellofemoral overstuffing, patellar displacement, or patellar tilt with clinical outcomes. We recommend the use of 3 Merchant views to fully evaluate the patellofemoral joint.

Evaluation of the Effect of the Sulcus Angle and Lateral to Medial Facet Ratio of the Patellar Groove on Patella Tracking in Aging Subjects with Stable Knee Joint

Purpose

To determine whether the sulcus angle and the lateral to medial facet ratio correlate with patella lateral displacement and tilt in patients without patella instability.

Methods

Computed tomography images of the lower limb of 64 patients without known arthropathy were collected. Three-dimensional models of the lower limb with a unified coordinate system were rebuilt by using Mimics software. The sulcus angle, lateral to medial facet ratio, lateral trochlear inclination of the patellar groove, tibial tuberosity-trochlear groove (TT-TG) distance, bisect offset index, and lateral tilt of the patella were measured. Pearson's correlation test was used to determine the relationship between the aforementioned parameters.

Results

Data from 51 patients were analyzed. The sulcus angle was negatively correlated with lateral tilt inclination (p < 0.001, r = 0.8406) and positively correlated with the bisect offset index (p = 0.003, r = 0.634) and patellar tilt (p = 0.03, r = 0.551); the lateral to medial facet ratio was positively correlated with TT-TG distance (p = 0.003, r = 0.643) and bisect offset index (p = 0.026, r = 0.559).

Conclusion

The sulcus angle and lateral to medial facet ratio of the patellar groove can influence patella tracking in patients with stable knee joints.

Patella Resurfacing in Total Knee Arthroplasty: A Series of 1280 Patients at Midterm Follow-Up

BACKGROUND

The management of patella in total knee arthroplasty (TKA) is a controversial topic. The elevated risk of patellofemoral complications seems to support those who are not eager to perform such procedure. The aim of this study is to carry out a retrospective assessment of patients who underwent patellar resurfacing during TKA from 2004 to 2009.

METHODS

From January 1, 2004, to December 31, 2009, 1280 patients underwent TKA with patellar prosthesis implantation. Of them, 861 patients (639 women and 222 men with an average age of 67.7 ± 12.3 years) were available for a telephonic interview consisting of the questions included in the Knee Pain Score (KPS). Patients presenting KPS >36 and those subjected to reoperation were then evaluated clinically and radiologically.

RESULTS

Of the 861 patients included in the study, 801 showed a KPS <36. Among the remaining 60 patients, 33 had a KPS >36, while 27 had been reoperated at the target knee. In the former case, a decrease in normal Insall-Salvati index and patellar tilt values (from 1.08 to 1.02 and from 9.3 to 9.1, respectively) and average anatomic axis (from -2.6° to 1.1°) was found comparing preoperative with last follow-up evaluation. Only in 0.6% of the cases of reintervention, patellofemoral complications were found to be the cause.

CONCLUSION

This study conducted on a large and homogenous group of patients confirms a very low rate of complications related to patella resurfacing during TKA.

Do Changes in Patellofemoral Joint Offset Lead to Adverse Outcomes in Total Knee Arthroplasty With Patellar Resurfacing? A Radiographic Review

BACKGROUND

Patellofemoral joint biomechanics contribute to anterior knee pain, instability, and dysfunction following total knee arthroplasty (TKA). Information about specific factors leading to anterior knee pain and dysfunction is currently limited. Changes in patellofemoral joint offset (PFO) refers to a mismatch between the preoperative and postoperative anteroposterior geometry of the patellofemoral joint. It remains unclear whether these changes lead to adverse outcomes in TKA.

METHODS

A retrospective radiographic review of 970 knees pre-TKA and post-TKA was completed to correlate the radiographic and clinical outcomes of changing the PFO using a posterior-stabilized single knee design with patellar resurfacing.

RESULTS

A total of 970 patients were reviewed. Postoperatively, the anterior femoral offset, anteroposterior femoral size, and anterior patellar offset were changed in 40%, 60%, and 71% of knees, respectively, compared to preoperative values. The Western Ontario and McMasters Osteoarthritis Index total score as well as subscale scores for pain and function were not significantly affected by an increase or decrease in PFO. Similarly, Knee Society Scores and range of motion were not significantly affected. Increased anterior patellar offset was, however, associated with increased postoperative patellar tilt. Postoperative patellar tilt was not correlated with adverse patient satisfaction scores or loss of range of motion.

CONCLUSION

Changes in PFO (decreased, maintained, or increased) are common post-TKA and are not associated with a difference in clinical outcomes. Increases in anterior patellar offset led to increased patellar tilt, which was not associated with adverse patient satisfaction scores.

Patellar component design influences size selection and coverage

BACKGROUND

Patellofemoral (PF) complications following total knee arthroplasty continue to occur. Outcomes are influenced by implant design, size and alignment in addition to patient factors. The objective of this study was to assess the effect of implant design, specifically round versus oval dome patellar components, on size selected and bony coverage in a population of 100 patients.

METHODS

Intraoperative assessments of patella component size were performed using surgical guides for round and oval designs. Digital images of the resected patellae with and without guides were calibrated and analyzed to measure bony coverage. Lastly, the medial-lateral location of the median ridge was assessed in the native patella and compared to the positioning of the apex of the patellar implants.

RESULTS

In 82% of subjects, a larger oval implant was selected compared to a round. Modest, but statistically significant, differences were observed in selected component coverage of the resected patella: 82.7% for oval versus 80.9% for round. Further, positioning of the apex of oval patellar components reproduced the median ridge of the native patella more consistently than for round components.

CONCLUSIONS

These findings characterized how implant design influenced size selection and coverage in a population of patients. The ability to "upsize" with oval dome components led to increases in bony coverage and better replication of the median ridge compared to round components. Quantifying the interactions between implant design, sizing and coverage for a current implant system in a population of patients supports surgical decision-making and informs the design of future implants.

New insight in the architecture of the quadriceps tendon

BACKGROUND

Published data regarding the structure of the quadriceps tendon are diverse. Dissection of the quadriceps muscle group revealed that beside the rectus femoris, vastus lateralis, vastus intermedius and vastus medialis a fifth muscle component- named the tensor vastus intermedius consistently fused into quadriceps tendon. It can be hypothesized that all these elements of the extensor apparatus of the knee joint must also be represented in the quadriceps tendon. This study investigated the multi-layered quadriceps tendon with special emphasis on all components of the quadriceps muscle group including the newly discovered tensor vastus intermedius.

METHODS

Ten cadaveric lower limbs were dissected. All muscle bellies of the extensor apparatus of the knee joint were identified and traced distally until they merged into the quadriceps tendon. Connections between the different aponeurotic layers of each muscle were studied from origin to insertion. The fusing points of each layer were marked. Their distance to the patella and the distances between the fusing points were measured.

RESULTS

Six elements of the quadriceps muscle group form a tri-laminar structure of the quadriceps tendon. The intermediate layer could be further sub-divided. The elements of the quadriceps tendon are 1. lateral aponeurosis of the vastus intermedius, 2. deep and 3. superficial medial aponeurosis of the vastus intermedius, 4. vastus lateralis, 5. tensor vastus intermedius and 6. rectus femoris. Even with differences in fiber direction - these elements join each other a certain distance proximal to the patella. All elements were fused over a region measuring 13 to 90 mm proximal to the patella. Lateral parts of the vastus intermedius formed the deepest layer of the quadriceps tendon. The superficial and deep layer of the medial vastus intermedius aponeurosis fused 56 mm (range, 30 to 90 mm) and 33 mm (range, 13 to 53 mm) above the patella with the aponeurosis of the tensor vastus intermedius and vastus lateralis respectively. Together they built the two-layered intermediate layer of the quadriceps tendon. The tendon of the rectus femoris forms the superficial layer. The vastus medialis inserts medially in all layers of the quadriceps tendon. Fibers of the lateral muscle components were oriented towards the medial, and fibers of the medial muscle components were oriented towards the lateral femoral condyle.

CONCLUSIONS

The three-layered quadriceps tendon is formed by six elements. These are 1. lateral aponeurosis of the vastus intermedius, 2. deep and 3. superficial medial aponeurosis of the vastus intermedius, 4. vastus lateralis, 5. tensor vastus intermedius and 6. rectus femoris. These elements of the extensor apparatus join each other proximal to the patella in a complex onion-like architecture. Its two-layered intermediate layer shows variable fusions points. The vastus medialis contributes to the quadriceps tendon with its medial insertion into all layers of the quadriceps tendon.

Total knee arthroplasty using trochlear groove as guide for position of femoral component in severe knee osteoarthritis

BACKGROUND

Apart from transepicondylar axis, the native femoral sulcus was also reported to be used as a guide for the femoral component position in total knee arthroplasty (TKA). However, it was not shown in patients with severe knee osteoarthritis. This study was conducted to compare the position of trochlear groove in patients with and without osteoarthritis, and to assess whether trochlear groove could be used as a guide for position of femoral component in TKA for severe knee osteoarthritis.

METHODS

Total 50 severe knee osteoarthritis patients (Kellgren Lawrence grade 3 or 4) who underwent TKA were included. Meanwhile, 50 patients who underwent arthroscopic surgery without osteoarthritis were included as control. The distance from trochlear groove to the midpoint of a virtual anterior condyle osteotomy line (parallel to the posterior condyle line) (a-b) was recorded by radiological and surgical measurements. Midpoint of transepicondylar axis and trochlear groove were used as guide for placing prosthesis model in TKA, respectively. No-thumb test was performed to assess the patellar tracking. The position of femoral component was finally performed using trochlear groove as guide in TKA.

RESULTS

Value of "a-b" was significantly different between osteoarthritic and control knees (P = 0.008). During the placement of prosthesis model, similar patellar tracking was detected between using midpoint of transepicondylar axis and trochlear groove as guide (P > 0.05). After placing femoral component using trochlear groove as guide, most patients obtained good patellofemoral congruence with pneumatic tourniquet inflated (n = 43) or deflated (n = 5), and good patellofemoral congruence was also obtained by lateral patellar retinaculum release in two patients.

CONCLUSION

Despite the shifting of trochlear groove caused by severe knee osteoarthritis, trochlear groove can be used as a guide for position of femoral component, with equivalent patellar tracking compared with transepicondylar axis.