Effect of opening-wedge high tibial osteotomy on the three-dimensional kinematics of the knee

Open wedge high tibial osteotomy does not decrease patellar height relative to femur: A three-dimensional computer model analysis

BACKGROUND

Patellar height, which decreases after open wedge high tibial osteotomy (OWHTO), has conventionally been assessed by tibial references using lateral radiographs of the knee; however, changes in the proximal tibia shape after OWHTO may affect this method. We aimed to evaluate the changes in patellar height position relative to the transepicondylar axis of the femur after OWHTO using in vivo three-dimensional (3D) computer models.

METHODS

Fourteen patients who underwent 3D magnetic resonance imaging (MRI) at 30° and 50° knee flexion before OWHTO and after hardware removal were included. 3D computer models of the knee were created from the MRI scans and superimposed over the images taken in each position using voxel-based registration. For patellar height evaluation, a patellar reference point was established at each flexion angle and the femoral condylar planes (FCP) were set, including the transepicondylar axis. The patellar center angle was defined as the angle between an FCP that included the top of the intercondylar notch and an FCP that included the patellar reference point. The patellar center angle was evaluated at 30° and 50° knee flexion before and after OWHTO.

RESULTS

The patellar center angle at 30° and 50° knee flexion did not significantly decrease after OWHTO, whereas the Caton-Deschamps index and Blackburne-Peel index based on tibia-referenced measurements significantly decreased postoperatively.

CONCLUSION

Patellar height position relative to the femur in the 3D computer model did not decrease after OWHTO, whereas tibia-referenced conventional radiographic measurements significantly decreased. When evaluating patellar height, characteristics of each parameter should be considered.

Knee kinematics are variously influenced by different correction angles in high tibial osteotomy (HTO)

PURPOSE

Literature reveals good to excellent data concerning patient satisfaction, as well as long-term outcomes after high tibial osteotomy (HTO). These results might be influenced by changes of knee kinematics through the procedure. However, exact influence of HTO on tibiofemoral kinematics remains unknown so far.

METHODS

We conducted this study on 10 knees of Thiel embalmed whole cadavers. Knee kinematics were assessed by a navigation device before HTO, after medial open-wedge HTO of 5°, respectively after medial open-wedge HTO of 10°.

RESULTS

Results revealed a significant femoral rollback/tibial internal rotation at increasing knee flexion from 80° after medial open-wedge HTO of 5° and 10°. Lesser femoral rollback/tibial internal rotation was seen after 5° HTO compared to 10° HTO until knee flexion of 70°.

CONCLUSION

Results reveal a significant change of tibiofemoral kinematics only after knee flexion of 80° and more, independently from the degree of tibial osteotomy. Adjacent structures, especially the ACL, seem thus more strained by sagittal slope changes rather than changes in coronal leg axis. HTO leads to changes in knee kinematics at flexion degrees of 80 and more. To what extent this influences adjacent structures like the ACL or meniscus should be further investigated.

A Systematic Review on Selected Complications of Open-Wedge High Tibial Osteotomy from Clinical and Biomechanical Perspectives

BACKGROUND

The wedge opened during high tibial osteotomy defines the alignment correction in different body planes and alters soft tissue insertions. Although multiple complications of the surgery can be correlated to this, there is still a lack of consensus on the occurrence of those complications and their cause. The current study is aimed at clarifying this problem using a combined medical and biomechanical perspective.

METHODS

We conducted a systematic review of the literature on selective complications of the surgery correlated with the angles of the opened wedge. Search topics covered tibial slope alteration, patellar height alteration, medial collateral ligament release, and model-based biomechanical simulations related to surgical planning or complications. Findings. The selection process with the defined inclusion/exclusion criteria led to the collection of qualitative and quantitative data from 38 articles. Medial collateral ligament tightness can be a valid complication of this surgery; however, further information about its preoperative condition seems required for better interpreting the results. The posterior tibial slope significantly increases, and the patellar height (using the Blackburne-Peel ratio) significantly decreases in the majority of the selected studies. Model-based biomechanical studies targeting surgical planning are mostly focused on the lower-limb alignment principles and tibiofemoral contact balancing rather than surgical complications. Interpretation. Increased posterior tibial slope, patellar height decrease, and medial collateral ligament tightness can occur due to alterations in different body planes and in soft tissue insertions after wedge opening. This study clarified that information about preoperative alignment in all body planes and soft-tissue conditions should be considered in order to avoid and anticipate these complications and to improve per surgery wedge adaptation. The findings and perspective of this review can contribute to improving the design of future clinical and biomechanical studies.

Abrasion arthroplasty promotes improvement of degenerated femoral trochlear cartilage after medial open wedge high tibial osteotomy

OBJECTIVES

Several studies have reported negative effects of open wedge high tibial osteotomy (OWHTO) on patellofemoral joints with cartilage degeneration and recommended performing other procedures. However, if chondral resurfacing surgery could promote improvement of cartilage degeneration in the patellofemoral joint, OWHTO would be an acceptable option. The purposes of this study were to arthroscopically evaluate the femoral trochlear articular cartilage after abrasion arthroplasty combined with OWHTO and to investigate the factors promoting improvement of that cartilage.

METHODS

The present study cohort comprised 18 knees of 18 patients with varus osteoarthritis of the knee who had (1) International Cartilage Repair Society (ICRS) grade 4 femoral trochlear chondral lesions at the time of OWHTO; (2) undergone abrasion arthroplasty of the femoral trochlear cartilage in combination with OWHTO; (3) undergone second-look arthroscopy; and (4) been followed up for more than 2 years. Cartilage status was arthroscopically graded at the time of OWHTO and second-look arthroscopy. Patients were allocated to two groups according to the status of the femoral trochlear cartilage at the time of second-look arthroscopy: the improved group comprised patients with an ICRS grade of less than 3, and the not improved group comprised those with an ICRS grade of 4. Clinical outcomes, expressed as Knee Injury and Osteoarthritis Outcome Score (symptoms, pain, activities of daily living, function in sports/recreation and quality of life) and selected radiographic variables were compared between the two groups.

RESULTS

There were 11 (61%) knees in the improved group and 7 (39%) in the not improved group. A comparison of radiographic variables between the two groups revealed that neither limb alignment nor patellar height affected cartilage changes. The two groups had similar results on the symptoms, pain, sports/recreation and activities of daily living subscales of the Knee Injury and Osteoarthritis Outcome Score. However, the quality of life subscale significantly differed between the two groups (p=0.025).

CONCLUSION

Degenerated femoral trochlear cartilage can improve after combined abrasion arthroplasty and OWHTO. A comparison of clinical outcomes between the improved and not improved groups revealed that neither radiographic variables nor clinical symptoms, including pain, affected cartilage changes at short-term follow-up.

LEVEL OF EVIDENCE

Case series, level V.

The effect of wedge and tibial slope angles on knee contact pressure and kinematics following medial opening-wedge high tibial osteotomy

BACKGROUND

High tibial osteotomy is a surgical procedure to treat medial compartment osteoarthritis in varus knees. The reported success rates of the procedure are inconsistent, which may be due to sagittal plane alignment of the osteotomy. The objective of this study was to determine the effect of changing tibial slope, for a range of tibial wedge angles in high tibial osteotomy, on knee joint contact pressure location and kinematics during continuous loaded flexion/extension.

METHODS

Seven cadaveric knee specimens were cycled through flexion and extension in an Oxford knee-loading rig. The osteotomy on each specimen was adjusted to seven clinically relevant wedge and slope combinations. We used pressure sensors to determine the position of the centre of pressure in each compartment of the tibial plateau and infrared motion capture markers to determine tibiofemoral and patellofemoral kinematics.

FINDINGS

In early knee flexion, a 5° increase in tibial slope shifted the centre of pressure in the medial compartment anteriorly by 4.5mm (P≤0.001), (from the neutral slope/wedge position). Increasing the tibial slope also resulted in the tibia translating anteriorly (P≤0.001).

INTERPRETATION

Changes to the tibial slope during high tibial osteotomy for all tested wedge angles shifted the centre of pressure in both the medial and lateral compartments substantially and altered knee kinematics. Tibial slope should be controlled during high tibial osteotomy to prevent unwanted changes in tibial plateau contact loads.

Conventional plate and screws in medial opening-wedge high tibial osteotomy: are they sufficiently stable? A retrospective study

Objective

Opening-wedge osteotomy of the proximal tibia is a widely performed procedure for treating medial gonarthrosis in active patients and in the presence of varus malalignment of the lower limb. The fixation method is controversial, and the use of conventional implants has been abandoned in favor of implants with more modern locking screws. The aim of the present clinical study was to assess the maintenance of the correction achieved in cases wherein fixation was performed using conventional implants.

Methods

This retrospective study included 51 patients who underwent opening-wedge high tibial osteotomy wherein fixation was performed using conventional implants (4.5-mm DCP plate and non-locking screws). Radiological findings regarding patellar height, tibial slope, and varus correction postoperatively and after consolidation were analyzed to assess the maintenance of the correction achieved by osteotomy.

Results

The mean loss of correction angle, calculated by the difference between the correction angle in the immediate postoperative period and that after consolidation, was 0.92° ± 0.9°. In addition, changes in patellar height determined by the Blackburne–Peel method and in the sagittal slope of the tibial plateau were not significant or clinically relevant.

Conclusions

The use of conventional plates and screws is viable in the fixation of opening-wedge high tibial osteotomy because they provide enough stability to maintain the achieved correction until consolidation, without significant changes.

Patellofemoral Osteoarthritis Progression and Alignment Changes after Open-Wedge High Tibial Osteotomy Do Not Affect Clinical Outcomes at Mid-term Follow-up

PURPOSE

To evaluate the clinical and radiological outcomes of open-wedge high tibial osteotomy (OWHTO) with respect to the patellofemoral joint and to assess whether patellofemoral osteoarthritis (OA) progression and alignment changes after OWHTO affect clinical outcomes.

METHODS

Inclusion criteria were consecutive patients who underwent OWHTO from March 2005 to September 2013. Exclusion criteria were loss to follow-up within 2 years and absence of second-look arthroscopy findings at the time of plate removal. The clinical parameters, including anterior knee pain while climbing stairs, Japanese Orthopedic Association score, and Oxford Knee Score, were evaluated. Radiological outcomes, including weight-bearing line ratio, modified Blackburne-Peel ratio, posterior tibial slope, tilting angle, lateral shift ratio, and patellofemoral OA (Kellgren-Lawrence grade), were evaluated preoperatively and at the final follow-up. Cartilage status (International Cartilage Repair Society grade) was evaluated at the initial HTO and at plate removal.

RESULTS

Fifty-three patients (60 knees) were included in this study. The mean follow-up was 58.2 ± 22.4 months. Two knees (3%) presented with mild anterior knee pain after OWHTO. The mean Japanese Orthopedic Association score (66.9 ± 11.2 to 91.2 ± 9.7) significantly improved (P < .001), and the mean Oxford Knee Score at the final follow-up was 42.0 ± 5.3. The mean modified Blackburne-Peel ratio (0.9 ± 0.1 to 0.7 ± 0.1, P < .001) and tilting angle (6.8 ± 3.7 to 5.6 ± 3.4, P = .033) significantly decreased after OWHTO, whereas no significant changes in posterior tibial slope (P = .511) and lateral shift ratio (P = .522) were observed. Radiologically, patellofemoral OA had progressed in 15 knees (27%), and arthroscopically patellofemoral cartilage degeneration had progressed in 27 knees (45%). However, there was no significant correlation between changes in patellofemoral alignment and clinical outcomes.

CONCLUSIONS

Changes in patellofemoral alignment and patellofemoral OA progression did not affect the clinical outcomes of OWHTO at mid-term follow-up.

LEVEL OF EVIDENCE

Level IV, therapeutic case series.

Patellofemoral and tibiofemoral alignment in a fully weight-bearing upright MR: Implementation and repeatability

PURPOSE

To develop methods for evaluating 3D patellofemoral and tibiofemoral alignment in vertical open-bore magnetic resonance (MR) scanners, with participants upright and fully weight-bearing; and to evaluate the repeatability of these methods in individuals with patellofemoral osteoarthritis (OA) and in asymptomatic knees.

MATERIALS AND METHODS

Our methods extend previously validated, reliable methods for evaluating alignment into an upright MR environment. In 10 participants with early patellofemoral OA and 10 with asymptomatic knees, we acquired sagittal T₁ -weighted turbo spin echo images in a 3T scanner to create accurate participant-specific 3D anatomical surface models. In a vertical open-bore 0.5T MR scanner, we obtained lower-resolution sagittal gradient echo images to capture bony position and orientation data. Participants were scanned in a position of squatting with the knees flexed 30°, three separate times to evaluate repeatability. Bone segmentation was performed manually, surface models were registered to data from the 0.5T scanner, and 3D patellofemoral and tibiofemoral alignment was calculated in all six degrees of freedom (three rotations and three translations).

RESULTS

Intraclass correlation coefficients (ICCs) were ≥0.94, with the exception of patellar spin (0.79). Standard errors of measure (SEM) were <2° rotation and <0.9 mm translation. Repeatability remained adequate when stratified by group, with the exception of patellar spin (ICC 0.57 for asymptomatic knees vs. 0.91 for OA knees).

CONCLUSION

We demonstrate methods for evaluating 3D alignment in upright fully weight-bearing participant positions in a vertical open-bore MR scanner. With the exception of patellar spin, repeatability was good to excellent.

LEVEL OF EVIDENCE

3 Technical Efficacy: Stage 1 J. Magn. Reson. Imaging 2018;47:841-847.

Coronal subluxation of the proximal tibia relative to the distal femur after opening wedge high tibial osteotomy

BACKGROUND

The coronal subluxation of the proximal tibia relative to the distal femur is a common radiological finding in patients with knee osteoarthritis. The purpose was to evaluate whether the coronal subluxation was corrected after opening wedge high tibial osteotomy (OWHTO), and whether this subluxation was one cause of inconsistency between the actual and predicted alignments (correction loss).

METHODS

Fifty-one patients (55 knees) were treated with OWHTO. The change of location between the intersection points of the femoral and tibial axes on the tibial plateau (subluxation-C), the change of location between the lines through the most lateral points of the lateral femoral and tibial condyles (subluxation-L), and joint space angle (JSA) were compared in standing knee radiographs before and one year after OWHTO. The subluxation-C and subluxation-L were converted to a percentage of the tibial plateau width.

RESULTS

The mean subluxation-C of 6.5% before OWHTO significantly increased to a mean subluxation-C of 7.3% one year after OWHTO. The mean subluxation-L of 6.3% and JSA of 4.5° before OWHTO significantly decreased to a subluxation-L of 1.8% and JSA of 3.3° one year after OWHTO. The change in subluxation-L correlated with the change in femorotibial angle and correction loss (r=0.634, P<0.001 and r=0.463, P<0.001, respectively).

CONCLUSION

The proximal tibia shifted medially relative to the distal femur after OWHTO. This medial shift correlated with the correction loss. The coronal subluxation might be one cause of correction loss.

Comparative study of computer-assisted total knee arthroplasty after opening wedge osteotomy versus after unicompartmental arthroplasty

Aims

The role of high tibial osteotomy (HTO) is being questioned by the use of unicompartmental knee arthroplasty (UKA) in the treatment of medial compartment femorotibial osteoarthritis. Our aim was to compare the outcomes of revision HTO or UKA to a total knee arthroplasty (TKA) using computer-assisted surgery in matched groups of patients.

Patients and Methods

We conducted a retrospective study to compare the clinical and radiological outcome of patients who underwent revision of a HTO to a TKA (group 1) with those who underwent revision of a medial UKA to a TKA (group 2). All revision procedures were performed using computer-assisted surgery. We extracted these groups of patients from our database. They were matched by age, gender, body mass index, follow-up and pre-operative functional score. The outcomes included the Knee Society Scores (KSS), radiological outcomes and the rate of further revision.

Results

There were 20 knees in 20 patients in each group. The mean follow-up was 4.1 years (2 to 18.7). The mean total KSS at last follow-up was 185.7 (standard deviation (sd) 5) in group 1 compared with 176.5 (sd 11) for group 2 (p = 0.003). The mean hip-knee-ankle angle was 180.2° (sd 3.2°) in group 1 and 179.0° (sd 2.2°) in group 2. No revision was required.

Conclusion

We found that good functional and radiological outcomes followed revision of both HTO and UKA to TKA. Revision of HTO showed significantly better functional outcomes. These results need to be further investigated by a prospective randomised controlled trial involving a larger group of patients. Cite this article: Bone Joint J 2016;98-B:1620–4.

An MRI-compatible loading device to assess knee joint cartilage deformation: Effect of preloading and inter-test repeatability

It has been suggested that the extent and location of cartilage deformation within a joint under compressive loading may be predictive of predisposition to further degeneration. To explore this relationship in detail requires the quantification of cartilage deformation under controlled loads on a per-patient basis in a longitudinal manner. Our objectives were (1) to design a device capable of applying controllable axial loads while ensuring repeatable within-patient tibiofemoral positioning during magnetic resonance imaging (MRI) scans and (2) to determine the duration for which load should be maintained prior to the image acquisition, for a reproducible measurement of cartilage deformation, within the restraints of a clinical setting. A displacement control loading device was manufactured from MRI-compatible materials and tested on four volunteers for the following five scans: an unloaded scan, two repeat immediate scans which were started immediately after the application of 50% body weight, and two repeat delayed scans started 12 min after load application. Outcome measures included within-patient changes in tibiofemoral position and cartilage deformation between repeat loaded scans. The differences in tibiofemoral position between repeat loaded scans were <1mm in translation and <2° in rotation. Cartilage deformations were more consistent in the delayed scans compared to the immediate scans. We conclude that our loading device can ensure repeatable tibiofemoral positioning to allow for longitudinal studies, and the delayed scan may enable us to obtain more reproducible measurements of cartilage deformation in a clinical setting.

Cartilage health in high tibial osteotomy using dGEMRIC: Relationships with joint kinematics

PURPOSE

The aims of this study are to determine how opening-wedge high tibial osteotomy (HTO) affects cartilage health in the tibiofemoral (TF) joint and patella, and to explore relationships between TF and patellofemoral (PF) joint kinematics and cartilage health in HTO.

METHODS

14 knees (13 subjects) with medial TF osteoarthritis (OA) were examined before HTO and 6 and 12 months after HTO using delayed gadolinium-enhanced MRI of cartilage (dGEMRIC) to evaluate cartilage health at the TF joint and patella. They were also examined using a validated 3D MR knee kinematics measurement to obtain 11 rotations and translations at both TF and PF joints.

RESULTS

No statistically significant differences in overall TF or patellar dGEMRIC score were found at 6 or 12 months after HTO. However three subjects had large decreases (mean 105 ms) in TF dGEMRIC at 6 months that recovered at 12 months. Kinematics for these subjects were compared to subjects who did not have decreases in TF dGEMRIC at 6 months (n=5). Differences were observed between groups with HTO in anterior and proximal tibial translation (mean differences 3.05 mm and 1.35 mm), and patellar flexion (mean difference 3.65°). These changes were consistent between 6 and 12 months, despite recovery of TF dGEMRIC values.

CONCLUSIONS

We did not find significant differences in TF or patellar dGEMRIC before and after HTO with all subjects, however there were differences in kinematics between subjects who had a decrease in TF dGEMRIC at 6 months and those who did not. This suggests a link between joint kinematics and cartilage health in HTO.

CLINICAL RELEVANCE

The effect of opening-wedge high tibial osteotomy on cartilage GAG concentration may be linked to specific changes in knee kinematics following surgery.