Metal-backed versus all-polyethylene unicompartmental knee arthroplasty: Proximal tibial strain in an experimentally validated finite element model

Metal-backed or all-poly tibial components: which are better for medial unicompartmental knee arthroplasty? A propensity-score-matching retrospective study at the 5-year follow-up

BACKGROUND

This retrospective medium-term follow-up study compares the outcomes of medial fixed-bearing unicompartmental knee arthroplasty (mUKA) using a cemented metal-backed (MB) or an all-polyethylene (AP) tibial component.

MATERIALS AND METHODS

The database of our institution was mined for primary mUKA patients implanted with an MB or an AP tibial component (the MB-UKA and AP-UKA groups, respectively) from 2015 to 2018. We compared patient demographics, patient-reported outcome measures (PROMs), and motion analysis data obtained with the Riablo™ system (CoRehab, Trento, Italy). We conducted propensity-score-matching (PSM) analysis (1:1) using multiple variables.

RESULTS

PSM analysis yielded 77 pairs of MB-UKA and AP-UKA patients. At 5 years, the physical component summary (PCS) score was 52.4 ± 8.3 in MB-UKA and 48.2 ± 8.3 in AP-UKA patients (p < 0.001). The Forgotten Joint Score (FJS-12) was 82.9 ± 18.8 in MB-UKAs and 73.4 ± 22.5 in AP-UKAs (p = 0.015). Tibial pain was reported by 7.8% of the MB-UKA and 35.1% of the AP-UKA patients (p < 0.001). Static postural sway was, respectively, 3.9 ± 2.1 cm and 5.4 ± 2.3 (p = 0.0002), and gait symmetry was, respectively, 92.7% ± 3.7 cm and 90.4% ± 5.4 cm (p = 0.006). Patient satisfaction was 9.2 ± 0.8 in the MB-UKA and 8.3 ± 2.0 in the AP-UKA group (p < 0.003).

CONCLUSIONS

MB-UKA patients experienced significantly better 5-year static sway and gait symmetry outcomes than AP-UKA patients. Although the PROMs of the two groups overlapped, MB-UKA patients had a lower incidence of tibial pain, better FJS-12 and PCS scores, and were more satisfied.

Biomechanical effects of femoral prosthesis misalignment on the structure of the lateral compartment during medial unicompartmental knee arthroplasty in osteoporotic patients

BACKGROUND

This study aims to investigate the impact of varying coronal alignments of femoral prostheses on stress and strain distributions within the lateral compartment following unicompartmental knee arthroplasty (UKA) in patients with normal bone density and osteoporosis using finite element analysis. Additionally, it examines the relationship between osteoporosis and the progression of osteoarthritis in the lateral compartment postoperatively.

METHODS

UKA models were developed for both normal bone and osteoporotic conditions using a validated finite element model of the knee. Seven alignment conditions for the femoral prosthesis were simulated: 0° (neutral alignment), varus angles of 3°, 6°, and 9°, and valgus angles of 3°, 6°, and 9°, resulting in a total of 14 scenarios. Stress and strain distributions in the meniscus, tibial cartilage, and femoral cartilage of the lateral compartment were evaluated.

RESULTS

The results indicated that stress and strain in the meniscus, tibial cartilage, and femoral cartilage of the lateral compartment increased with greater varus alignment and decreased with greater valgus alignment in both normal and osteoporotic models. At equivalent alignment angles, stress and strain were consistently higher in the osteoporotic model (M2) compared to the normal bone model (M1), although the peak equivalent stress in the tibial cartilage was lower in the M2 model than in the M1 model.

CONCLUSIONS

In patients with osteoporosis undergoing fixed-bearing medial UKA, varus malalignment of the femoral prosthesis can lead to increased stress and strain in the lateral compartment's meniscus, tibial cartilage, and femoral cartilage. These findings suggest that osteoporosis may contribute to abnormal stress and strain distributions in the lateral compartment following UKA, potentially accelerating the progression of osteoarthritis in this region postoperatively.

Finite Element Analysis of the Effect of Femoral Prosthesis Varus and Valgus Angle Installation on the Lateral Compartment in Unicompartmental Knee Arthroplasty

BACKGROUND

This study used finite element analysis (FEA) to investigate the effect of varus and valgus angle on the lateral compartment in unicompartmental knee arthroplasty (UKA).

METHODS

One patient who underwent UKA was enrolled as the subject. Thirteen working conditions of the femoral prosthesis were simulated at varus and valgus angles of 0°, 2°, 4°, 6°, 8°, 10°, and 12°. A load of 1,000 N was applied downward along the mechanical axis of the femur, and the highest stress values on the surface of the polyethylene liner, cancellous bone under the tibial prosthesis, cartilage of femur lateral condyle, lateral meniscus, and tibial lateral plateau cartilage in each model were recorded. The six highest points were used to calculate the mean value.

RESULTS

The highest stress values on the surface of the polyethylene liner, cancellous bone under the tibial prosthesis, cartilage of femur lateral condyle, lateral meniscus, and tibial lateral plateau cartilage increased with an increase in the femoral prosthesis varus/valgus angle. As compared with the standard position of the femoral prosthesis, there was no significant difference in the surface stress values of the polyethylene liner, cancellous bone under the tibial prosthesis, cartilage of femur lateral condyle, lateral meniscus and tibial lateral plateau cartilage when the femoral prosthesis varus/valgus angle was less than 4° (p > 0.05). In addition, the stress magnitude on the polyethylene liner, cancellous bone under the tibial prosthesis, cartilage of femur lateral condyle, lateral meniscus, and tibial lateral plateau cartilage significantly increased when the femoral prosthesis varus/valgus angle was greater than 4° (p < 0.001).

CONCLUSIONS

The optimal femoral prosthesis varus/valgus angle in UKA was less than 4°.

Finite element analysis of medial closing and lateral opening wedge osteotomies of the distal femur in relation to hinge fractures

PURPOSE

Intraoperative hinge fractures in distal femur osteotomies represent a risk factor for loss of alignment and non-union. Using finite element analysis, the goal of this study was to investigate the influence of different hinge widths and osteotomy corrections on hinge fractures in medial closed-wedge and lateral open-wedge distal femur osteotomies.

METHODS

The hinge was located at the proximal margin of adductor tubercle for biplanar lateral open-wedge and at the upper border of the lateral femoral condyle for biplanar medial closed-wedge distal femur osteotomies, corresponding to optimal hinge positions described in literature. Different hinge widths (5, 7.5, 10 mm) were created and the osteotomy correction was opened/closed by 5, 7.5 and 10 mm. Tensile and compressive strain of the hinge was determined in a finite element analysis and compared to the ultimate strain of cortical bone to assess the hinge fracture risk.

RESULTS

Doubling the correction from 5 to 10 mm increased mean tensile and compressive strain by 50% for lateral open-wedge and 48% for medial closed-wedge osteotomies. A hinge width of 10 mm versus 5 mm showed increased strain in the hinge region of 61% for lateral open-wedge and 32% for medial closed-wedge osteotomies. Medial closed-wedge recorded a higher fracture risk compared to lateral open-wedge osteotomies due to a larger hinge cross-section area (60-67%) for all tested configurations. In case of a 5 mm hinge, medial closed-wedge recorded 71% higher strain in the hinge region compared to lateral open-wedge osteotomies.

CONCLUSION

Due to morphological features of the medial femoral condyle, finite element analysis suggests that lateral-open wedge osteotomies are the preferable option if larger corrections are intended, as a thicker hinge can remain without an increased hinge fracture risk.

All-polyethylene unicompartmental knee arthroplasty is associated with increased risks of poorer knee society knee score and lower satisfaction in obese patients

BACKGROUND

Although metal-backed tibial component (MB) is biomechanically superior to all-polyethylene (AP) implants in fixed-bearing unicompartmental knee arthroplasty (UKA), recent studies have shown comparable functional outcomes between the two. However, no study has examined this comparison in obese patients (BMI ≥ 30 kg/m²). We investigated whether functional outcomes between the two implants differ among obese patients, and whether the extent of obesity influences these outcomes.

PATIENTS AND METHODS

Four hundred twenty-two UKA implants from 347 obese patients were reviewed retrospectively. Patients were assessed using the Knee Society Knee Score (KSKS) and Function Score (KSFS), the original Oxford Knee Score (OKS), and SF-36 Physical Component Summary (PCS) and Mental Component Summary (MCS). Minimal clinically important difference (MCID) attainment was recorded. Patients' fulfillment of expectations and satisfaction with the surgery outcome was also graded. Patients were further divided into lower obesity (BMI 30-34.9 kg/m²) and higher obesity (BMI ≥ 35 kg/m²) to examine effect modification.

RESULTS

There were no differences in functional outcomes and quality-of-life scores, MCID attainment of functional scores, as well as satisfaction and expectation fulfillment between AP and MB. Among higher obesity patients, AP was associated with a poorer KSKS (p = 0.031) and lower proportion of satisfaction fulfillment (p = 0.041) 2 years postoperatively compared to MB.

CONCLUSION

We found no differences in functional and quality-of-life outcomes between fixed-bearing AP and MB tibial components among obese patients who underwent UKA. However, among higher obesity patients (BMI ≥ 35 kg/m²), patients with AP tibial component were associated with lower KSKS score and a lower proportion of attaining satisfaction fulfillment 2 years postoperatively.

The risk of tibial eminence avulsion fracture with bi-unicondylar knee arthroplasty : a finite element analysis

AIMS

The aim of this study was to determine the risk of tibial eminence avulsion intraoperatively for bi-unicondylar knee arthroplasty (Bi-UKA), with consideration of the effect of implant positioning, overstuffing, and sex, compared to the risk for isolated medial unicondylar knee arthroplasty (UKA-M) and bicruciate-retaining total knee arthroplasty (BCR-TKA).

METHODS

Two experimentally validated finite element models of tibia were implanted with UKA-M, Bi-UKA, and BCR-TKA. Intraoperative loads were applied through the condyles, anterior cruciate ligament (ACL), medial collateral ligament (MCL), and lateral collateral ligament (LCL), and the risk of fracture (ROF) was evaluated in the spine as the ratio of the 95^th percentile maximum principal elastic strains over the tensile yield strain of proximal tibial bone.

RESULTS

Peak tensile strains occurred on the anterior portion of the medial sagittal cut in all simulations. Lateral translation of the medial implant in Bi-UKA had the largest increase in ROF of any of the implant positions (43%). Overstuffing the joint by 2 mm had a much larger effect, resulting in a six-fold increase in ROF. Bi-UKA had ~10% increased ROF compared to UKA-M for both the male and female models, although the smaller, less dense female model had a 1.4 times greater ROF compared to the male model. Removal of anterior bone akin to BCR-TKA doubled ROF compared to Bi-UKA.

CONCLUSION

Tibial eminence avulsion fracture has a similar risk associated with Bi-UKA to UKA-M. The risk is higher for smaller and less dense tibiae. To minimize risk, it is most important to avoid overstuffing the joint, followed by correctly positioning the medial implant, taking care not to narrow the bone island anteriorly.Cite this article: Bone Joint Res 2022;11(8):575-584.

A rare case of oxidized zirconium - All polyethylene tibia unicompartmental arthroplasty failure: A case report

Oxidized zirconium (Oxinium) implants has been claimed as the best material in terms of wear reduction. However, longevity of an all polyethylene uni knee arthroplasty (UKA) has been a long debate. We reported a rare case of 74 year old female who was performed all polyethylene UKA 6 years prior and fell 3 months prior. After the incident, patient was wheel-chair ridden afterwards. There was no evidence of fracture upon conventional radiography examination. Conversion of UKA to total knee replacement (TKA) was performed and patient was able to walk with aid after the surgery. The failed Oxinium all polyethylene UKA failure in this case is suspected due osteoarthritis progression.

Total and partial knee arthroplasty implants that maintain native load transfer in the tibia

AIMS

Unicompartmental and total knee arthroplasty (UKA and TKA) are successful treatments for osteoarthritis, but the solid metal implants disrupt the natural distribution of stress and strain which can lead to bone loss over time. This generates problems if the implant needs to be revised. This study investigates whether titanium lattice UKA and TKA implants can maintain natural load transfer in the proximal tibia.

METHODS

In a cadaveric model, UKA and TKA procedures were performed on eight fresh-frozen knee specimens, using conventional (solid) and titanium lattice tibial implants. Stress at the bone-implant interfaces were measured and compared to the native knee.

RESULTS

Titanium lattice implants were able to restore the mechanical environment of the native tibia for both UKA and TKA designs. Maximum stress at the bone-implant interface ranged from 1.2 MPa to 3.3 MPa compared with 1.3 MPa to 2.7 MPa for the native tibia. The conventional solid UKA and TKA implants reduced the maximum stress in the bone by a factor of 10 and caused > 70% of bone surface area to be underloaded compared to the native tibia.

CONCLUSION

Titanium lattice implants maintained the natural mechanical loading in the proximal tibia after UKA and TKA, but conventional solid implants did not. This is an exciting first step towards implants that maintain bone health, but such implants also have to meet fatigue and micromotion criteria to be clinically viable. Cite this article: Bone Joint Res 2022;11(2):91-101.

All-Polyethylene Tibial Component Does Not Affect Survivorship of Medial Unicompartmental Knee Arthroplasty at Mid-Term Follow-Up

The present study's primary aim was to determine the survivorship of a large cohort of patients implanted with a single design all-polyethylene tibial component medial unicompartmental knee arthroplasty (UKA). Its secondary purpose was to investigate the reasons underlying implant failure, with specific attention to component positioning and limb alignment. Between 2007 and 2013, 166 patients underwent medial UKA with a single design all-polyethylene tibial component at two centers. Preoperatively and postoperatively, patients were administered clinical outcome scores and radiographic information were collected. Postoperative complications and causes of revision were recorded. A total of 140 patients (80 in Center A and 60 in Center B) who underwent all-polyethylene tibial component medial UKA (82 cases in Center A and 60 in Center B) were taken into account. Kaplan-Meier cumulative survivorship of implants was 96.5% (confidence interval [CI]: 91.7-98.6%) at an average follow-up of 61.1 months. Tibial aseptic loosening was accounted for failure in one case, while no correlation was found between implant positioning and failure. Two revisions were performed in Center A and three in Center B. Slight correction of the preoperative varus deformity was performed at both centers. All-polyethylene tibial component UKA provided satisfactory clinical and functional outcome, with excellent survival rate in the early and mid-term follow-up. Continued patient follow-up is needed to determine long-term survivorship of the examined UKA model.

No difference in functional outcomes, quality of life and survivorship between metal-backed and all-polyethylene tibial components in unicompartmental knee arthroplasty: a 10-year follow-up study

PURPOSE

The purpose of this study was to compare functional outcomes, quality of life and survivorship at a minimum of 10 years postoperatively, between MB and AP tibial components in fixed-bearing UKAs.

METHODS

A retrospective cohort study of 146 Query ID="Q3" Text="Author names: Please confirm if the author names are presented accurately and in the correct sequence (Lo Ngai Nung, Yeo Seng Jin). Also, kindly confirm the details in the metadata are correct." UKAs performed between 2004 and 2007 by a single fellowship-trained arthroplasty surgeon was carried out. 27 UKAs received MB tibial components and 119 UKAs received AP tibial components. The cohort was followed up prospectively for 10 years. Functional outcomes were compared using the Knee Society Functional Score (KSFS), Knee Society Knee Score (KSKS) and Oxford Knee Score (OKS). Quality of life measures were obtained from the Physical Component Summary (PCS) and Mental Component Summary (MCS), derived from the Short Form 36 Health Survey (SF-36). Propensity score matching was performed in a 1:3 ratio of MB versus AP tibial components to account for possible confounding variables. Thereafter, outcomes between the two groups were compared. The proportion of patients who had attained the minimum clinically important difference (MCID) for the abovementioned scores was recorded as well.

RESULTS

After propensity score matching, there were 28 UKAs with MB tibial components and 76 UKAs with AP tibial components. There was no significant difference between the two groups in functional outcomes (KSFS, KSKS and OKS), quality of life (PCS and MCS) and survivorship (92.3% vs 91.1%, respectively) at a minimum of 10 years postoperatively. However, a significantly higher proportion of patients in the group with AP tibial components attained the MCID for PCS at 10 years postoperatively, compared to those with MB tibial components (p = 0.031).

CONCLUSION

In conclusion, there were no significant differences in functional outcomes measures, quality of life and survivorship between MP and AP tibial components at a minimum of 10 years postoperatively.

LEVEL OF EVIDENCE

III.

Hinge location and apical drill holes in opening wedge high tibial osteotomy: A finite element analysis

At the time of medial opening wedge high tibial osteotomy (HTO) to realign the lower limb and offload medial compartment knee osteoarthritis, unwanted fractures can propagate from the osteotomy apex. The aim of this study was to use finite element (FE) analysis to determine the effect of hinge location and apical drill holes on cortical stresses and strains in HTO. A monoplanar medial opening wedge HTO was created above the tibial tuberosity in a composite tibia. Using the FE method, intact lateral hinges of different widths were considered (5, 7.5, and 10 mm). Additional apical drill holes (2, 4, and 6 mm diameters) were then incorporated into the 10 mm hinge model. The primary outcome measure was the maximum principal strain in the cortical bone surrounding the hinge axis. Secondary outcomes included the force required for osteotomy opening, minimum principal strain, and mean cortical bone stresses (maximum principal/minimum principal/von Mises). Larger intact hinges (10 mm) were associated with higher cortical bone maximum principal strain and stress, lower minimum principal strain/stress, and required greater force to open. Lateral cortex strain concentrations were present in all scenarios, but extended to the joint surface with the 10 mm hinge. Apical drill holes reduced the mean cortical bone maximum principal strain adjacent to the hinge axis: 2 mm hole 6% reduction; 4 mm 35% reduction; and 6 mm 55% reduction. Incorporating a 4-mm apical drill hole centered 10 mm from the intact lateral cortex maintains a cortical bone hinge, minimizes cortical bone strains and reduces the force required to open the HTO; thus improving control.

Does Unicondylar Knee Arthroplasty Affect Tibial Bone Strain? A Paired Cadaveric Comparison of Fixed- and Mobile-bearing Designs

BACKGROUND

Unexplained pain in the medial proximal tibia frequently leads to revision after unicondylar knee arthroplasty (UKA). As one of the most important factors for osteogenic adaptive response, increased bone strain following UKA has been suggested as a possible cause.

QUESTIONS/PURPOSES

In this study we: (1) performed a cadaver-based kinematic analysis on paired cadaveric specimens before and after mobile-bearing and fixed-bearing UKA; and (2) simultaneously characterized the strain distribution in the anterior and posterior proximal tibia during squatting.

METHODS

Five pairs of fresh, frozen full-leg cadaver specimens (four male, one female, 64 years to 87 years) were subjected to a dynamic squatting motion on a kinematic rig to simulate joint loading for a large ROM. Forces were applied to the quadriceps and hamstrings during the simulation while an infrared camera system tracked the location of reflective markers attached to the tibia and femur. Tibial cortical bone strain was measured with stacked strain gauge rosettes attached at predefined anterior and posterior positions on the medial cortex. Pairwise implantation of mobile-bearing (UKAMB) and fixed-bearing implants (UKAFB) allowed a direct comparison of right and left knees from the same donor through a linear mixed model.

RESULTS

UKAMB more closely replicated native kinematics in terms of tibial rotation and in AP and mediolateral translation. Maximum principal bone strain values were consistently increased compared with native (anteromedial, mean [± SD] peak strain: 311 µε ± 190 and posterior, mean peak strain: 321 µε ± 147) with both designs in the anteromedial (UKAFB, mean peak strain: 551 µε ± 381, Cohen's d effect size 1.3 and UKAMB, mean peak strain: 596 µε ± 564, Cohen's d effect size 1.5) and posterior (UKAFB, mean peak strain: 505 µε ± 511, Cohen's d effect size 1.3 and UKAMB, mean peak strain: 633 µε ± 424, Cohen's d effect size 2.1) region. However, in the anterolateral region of the medial tibial bone, UKAFB demonstrated the overall largest increase in strain (mean peak strain: 1010 µε ± 787, Cohen's d effect size 1.9), while UKAMB (613 µε ± 395, Cohen's d effect size 0.2) closely replicated values of the native knee (563 µε ± 234).

CONCLUSION

In this in vitro cadaver study both UKAMB and UKAFB led to an increase in bone strain in comparison with the native knee. However, in the anterolateral region of the medial tibial plateau, proximal tibial bone strain was lower after UKAMB and UKAFB. Both UKAMB and UKAFB lead to comparable increases in anteromedial and posterior tibial strain in comparison with the native knee. In the anterolateral region of the medial tibial plateau UKA, proximal tibial bone strain was closer to the native knee after UKAMB than after UKAFB. In an attempt to link kinematics and strain behavior of these designs there seemed to be no obvious relation.

CLINICAL RELEVANCE

Further clinical research may be able to discern whether the observed differences in cortical strain after UKA is associated with unexplained pain in patients and whether the observed differences in cortical bone strain between mobile-bearing and fixed unicondylar designs results in a further difference in unexplained pain.

Tibial shape and size predicts the risk of tibial plateau fracture after cementless unicompartmental knee arthroplasty in Japanese patients

AIMS

Cementless unicompartmental knee arthroplasty (UKA) has advantages over cemented UKA, including improved fixation, but has a higher risk of tibial plateau fracture, particularly in Japanese patients. The aim of this multicentre study was to determine when cementless tibial components could safely be used in Japanese patients based on the size and shape of the tibia.

METHODS

The study involved 212 cementless Oxford UKAs which were undertaken in 174 patients in six hospitals. The medial eminence line (MEL), which is a line parallel to the tibial axis passing through the tip of medial intercondylar eminence, was drawn on preoperative radiographs. Knees were classified as having a very overhanging medial tibial condyle if this line passed medial to the medial tibial cortex. They were also classified as very small if a size A/AA tibial component was used.

RESULTS

The overall rate of fracture was 8% (17 out of 212 knees). The rate was higher in knees with very overhanging condyles (Odds ratio (OR) 13; p < 0.001) and with very small components (OR 7; p < 0.001). The OR was 21 (p < 0.001) in those with both very overhanging condyles and very small components. In all, 69% of knees (147) had neither very overhanging nor very small components, and the fracture rate in these patients was 1.4% (2 out of 147 knees). Males had a significantly reduced risk of fracture (OR 0.13; p = 0.002), probably because no males required very small components and females were more likely to have very overhanging condyles (OR 3; p = 0.013). 31% of knees (66) were in males and in these the rate of fracture was 1.5% (1 out of 66 knees).

CONCLUSION

The rate of tibial plateau fracture in Japanese patients undergoing cementless UKA is high. We recommend that cemented tibial fixation should be used in Japanese patients who require very small components or have very overhanging condyles, as identified from preoperative radiographs. In the remaining 69% of knees cementless fixation can be used. This approach should result in a low rate of fracture. Cite this article: Bone Joint J 2020;102-B(7):861-867.

A systematic review of imageless hand-held robotic-assisted knee arthroplasty: learning curve, accuracy, functional outcome and survivorship

The aim of this systematic review was to present and assess the quality of evidence for learning curve, component positioning, functional outcomes and implant survivorship for image-free hand-held robotic-assisted knee arthroplasty.Searches of PubMed and Google Scholar were performed in line with the Preferred Reporting Items for Systematic Review and Meta-Analysis statement. The criteria for inclusion was any published full-text article or abstract assessing image-free hand-held robotic knee arthroplasty and reporting learning curve, implant positioning, functional outcome or implant survival for clinical or non-clinical studies.There were 22 studies included. Five studies reported the learning curve: all were for unicompartmental knee arthroplasty (UKA) - no learning curve for accuracy, operative time was reduced after five to 10 cases and a steady surgical time was achieved after eight cases.There were 16 studies reporting accuracy: rate of outliers was halved, higher rate of joint line and mechanical axis restoration, supported by low root mean square error values.Six studies reported functional outcome: all for UKA, improvement at six to 52 weeks, no difference from manual UKA except when assessed for lateral UKA which showed improved clinical outcomes.Two studies reported survivorship: one reported an unadjusted revision rate of 7% at 20 months for medial UKA and the other found a 99% two-year survival rate for UKA.There was evidence to support more accurate implant positioning for UKA, but whether this is related to superior functional outcomes or improved implant survivorship was not clear and further studies are required. Cite this article: EFORT Open Rev 2020;5:319-326. DOI: 10.1302/2058-5241.5.190065.

A finite element analysis of tibial tritanium cones without stems in varying bone defects

BACKGROUND

In the UK around 10% of hip and knee arthroplasties are revision operations. At revision total knee arthroplasty (rTKA), bone loss management is critical to achieving a stable bone-implant construct. Though tritanium cones have been used to manage bone defects in rTKA, their biomechanical performance with varying defects remains unknown.

METHODS

Uncontained tibial bone defects at four anatomic locations, with varying depths and widths (Type T2A and T2B) were investigated computationally in a composite tibia which was subjected to four loading scenarios. The ability of the tritanium cone to replace the tibial bone defect was examined using the outcome measures of bone strain distribution and interface micromotions.

RESULTS

It was found that anterior and lateral defects do not significantly alter the strain distribution compared with intact bone. For medial defects, strain distribution is sensitive to defect width; while strain distributions for posterior defects are associated with defect width and depth. In general, micromotions at the bone-implant interface are small and are primarily influenced by defect depth.

CONCLUSIONS

Our models show that the cone is an acceptable choice for bone defect management in rTKA. Since all observed micromotions were small, successful osteointegration would be expected in all types of uncontained defects considered in this study. Tritanium cones safely accommodate uncontained tibial defects up to 10 mm deep and extending up to 9 mm from the centre of the cone. Medial and posteriorly based defects managed with symmetric cones display the greatest bone strains and asymmetric cones may be useful in this context.

Metaphyseal cones in revision total knee arthroplasty: The role of stems

Aims

Metaphyseal tritanium cones can be used to manage the tibial bone loss commonly encountered at revision total knee arthroplasty (rTKA). Tibial stems provide additional fixation and are generally used in combination with cones. The aim of this study was to examine the role of the stems in the overall stability of tibial implants when metaphyseal cones are used for rTKA.

Methods

This computational study investigates whether stems are required to augment metaphyseal cones at rTKA. Three cemented stem scenarios (no stem, 50 mm stem, and 100 mm stem) were investigated with 10 mm-deep uncontained posterior and medial tibial defects using four loading scenarios designed to mimic activities of daily living.

Results

Small micromotions (mean < 12 µm) were found to occur at the bone-implant interface for all loading cases with or without a stem. Stem inclusion was associated with lower micromotion, however these reductions were too small to have any clinical significance. Peak interface micromotion, even when the cone is used without a stem, was too small to effect osseointegration. The maximum difference occurred with stair descent loading. Stress concentrations in the bone occurred around the inferior aspect of each implant, with the largest occurring at the end of the long stem; these may lead to end-of-stem pain. Stem use is also found to result in stress shielding in the bone along the stem.

Conclusion

When a metaphyseal cone is used at rTKA to manage uncontained posterior or medial defects of up to 10 mm depth, stem use may not be necessary.

Cite this article:Bone Joint Res. 2020;9(4):162–172.

Robotic-assisted unicompartmental knee arthroplasty has a greater early functional outcome when compared to manual total knee arthroplasty for isolated medial compartment arthritis

Aims

The primary aim of the study was to compare the knee-specific functional outcome of robotic unicompartmental knee arthroplasty (rUKA) with manual total knee arthroplasty (mTKA) for the management of isolated medial compartment osteoarthritis. Secondary aims were to compare length of hospital stay, general health improvement, and satisfaction between rUKA and mTKA.

Methods

A powered (1:3 ratio) cohort study was performed. A total of 30 patients undergoing rUKA were propensity score matched to 90 patients undergoing mTKA for isolated medial compartment arthritis. Patients were matched for age, sex, body mass index (BMI), and preoperative function. The Oxford Knee Score (OKS) and EuroQol five-dimension questionnaire (EQ-5D) were collected preoperatively and six months postoperatively. The Forgotten Joint Score (FJS) and patient satisfaction were collected six months postoperatively. Length of hospital stay was also recorded.

Results

There were no significant differences in the preoperative demographics (p ⩾ 0.150) or function (p ⩾ 0.230) between the groups. The six-month OKS was significantly greater in the rUKA group when compared with the mTKA group (difference 7.7, p < 0.001). There was also a greater six-month postoperative EQ-5D (difference 0.148, p = 0.002) and FJS (difference 24.2, p < 0.001) for the rUKA when compared to the mTKA. No patient was dissatisfied in the rUKA group and five (6%) were dissatisfied in the mTKA, but this was not significant (p = 0.210). Length of stay was significantly (p < 0.001) shorter in the rUKA group (median two days, interquartile range (IQR) 1 to 3) compared to the mTKA (median four days, IQR 3 to 5).

Conclusion

Patients with isolated medial compartment arthritis had a greater knee-specific functional outcome and generic health with a shorter length of hospital stay after rUKA when compared to mTKA.

Cite this article: Bone Joint Res 2019;9(1):15–22.

Finite-Element Analysis of Stress on the Proximal Tibia After Unicompartmental Knee Arthroplasty

BACKGROUND

Because the indications for unicompartmental knee arthroplasty (UKA) are limited, few patients have undergone the procedure. Therefore, it is difficult to decide the acceptable range of variation in the details of UKA on the basis of the available clinical data. The objective of this study was to identify factors that affect the distribution of stress on the proximal tibia after UKA.

METHODS

Two-dimensional finite-element analysis of the proximal tibia was used to assess four factors: 1) two types of implants-all ultra-high-molecular-weight polyethylene (UHMWPE) and metal-backed implants, 2) postoperative alignment, 3) coverage of tibial bone, 4) level of the tibial osteotomy.

RESULTS

In cases of varus alignment, high stress values and large areas of deformation were observed on and beneath the implant. In cases of valgus alignment, stress was concentrated at the lateral portion of tibial tray. In comparison with the standard model, stress concentration was greater at the medial edge of the medial condyle in a narrow-coverage model. Stress distribution for the low-osteotomy-level model did not differ markedly differ from that for the standard model. Stress distribution was better for metal-backed implants than for UHMWPE implants.

CONCLUSIONS

Proper postoperative alignment must be achieved in UKA. The osteotomy level should be set at the cancellous bone close to the joint line, and preservation of bone stock should be maximized.

Reduction in tibiofemoral conformity in lateral unicompartmental knee arthroplasty is more representative of normal knee kinematics

AIMS

Commonly performed unicompartmental knee arthroplasty (UKA) is not designed for the lateral compartment. Additionally, the anatomical medial and lateral tibial plateaus have asymmetrical geometries, with a slightly dished medial plateau and a convex lateral plateau. Therefore, this study aims to investigate the native knee kinematics with respect to the tibial insert design corresponding to the lateral femoral component.

METHODS

Subject-specific finite element models were developed with tibiofemoral (TF) and patellofemoral joints for one female and four male subjects. Three different TF conformity designs were applied. Flat, convex, and conforming tibial insert designs were applied to the identical femoral component. A deep knee bend was considered as the loading condition, and the kinematic preservation in the native knee was investigated.

RESULTS

The convex design, the femoral rollback, and internal rotation were similar to those of the native knee. However, the conforming design showed a significantly decreased femoral rollback and internal rotation compared with that of the native knee (p < 0.05). The flat design showed a significant difference in the femoral rollback; however, there was no difference in the tibial internal rotation compared with that of the native knee.

CONCLUSION

The geometry of the surface of the lateral tibial plateau determined the ability to restore the rotational kinematics of the native knee. Surgeons and implant designers should consider the geometry of the anatomical lateral tibial plateau as an important factor in the restoration of native knee kinematics after lateral UKA.Cite this article: Bone Joint Res 2019;8:593-600.

The effect of malalignment on proximal tibial strain in fixed-bearing unicompartmental knee arthroplasty: A comparison between metal-backed and all-polyethylene components using a validated finite element model

Objectives

Elevated proximal tibial bone strain may cause unexplained pain, an important cause of unicompartmental knee arthroplasty (UKA) revision. This study investigates the effect of tibial component alignment in metal-backed (MB) and all-polyethylene (AP) fixed-bearing medial UKAs on bone strain, using an experimentally validated finite element model (FEM).

Methods

A previously experimentally validated FEM of a composite tibia implanted with a cemented fixed-bearing UKA (MB and AP) was used. Standard alignment (medial proximal tibial angle 90°, 6° posterior slope), coronal malalignment (3°, 5°, 10° varus; 3°, 5° valgus), and sagittal malalignment (0°, 3°, 6°, 9°, 12°) were analyzed. The primary outcome measure was the volume of compressively overstrained cancellous bone (VOCB) < -3000 µε. The secondary outcome measure was maximum von Mises stress in cortical bone (MSCB) over a medial region of interest.

Results

Varus malalignment decreased VOCB but increased MSCB in both implants, more so in the AP implant. Varus malalignment of 10° reduced the VOCB by 10% and 3% in AP and MB implants but increased the MSCB by 14% and 13%, respectively. Valgus malalignment of 5° increased the VOCB by 8% and 4% in AP and MB implants, with reductions in MSCB of 7% and 10%, respectively. Sagittal malalignment displayed negligible effects. Well-aligned AP implants displayed greater VOCB than malaligned MB implants.

Conclusion

All-polyethylene implants are more sensitive to coronal plane malalignments than MB implants are; varus malalignment reduced cancellous bone strain but increased anteromedial cortical bone stress. Sagittal plane malalignment has a negligible effect on bone strain.

Cite this article: I. Danese, P. Pankaj, C. E. H. Scott. The effect of malalignment on proximal tibial strain in fixed-bearing unicompartmental knee arthroplasty: A comparison between metal-backed and all-polyethylene components using a validated finite element model. Bone Joint Res 2019;8:55–64. DOI: 10.1302/2046-3758.82.BJR-2018-0186.R2.

Medium-term outcome of cementless, mobile-bearing, unicompartmental knee arthroplasty

Background

Cemented, mobile-bearing unicondylar knee arthroplasty (UKA) yields good functional results. However, radiolucent lines (RLL) are not uncommon, even in asymptomatic patients, and it has been debated whether these "physiological" RLLs are indicative of loosening. Cementless UKA may lead to fewer RLLs compared with cemented devices. The present study was designed to document mid-term outcome with an emphasis on clinical outcomes.

Methods

We included 153 knees of 150 consecutive patients in a retrospective study. All patients had received a cementless medial mobile-bearing UKA. Patients were evaluated with use of the Knee Society Score (KSS), which was obtained at baseline and at final follow-up. The WOMAC, Oxford Knee Score (OKS) and Forgotten Joint Scores (FJS-12) were administered at the final follow-up. Anteroposterior (AP) and lateral radiographs were taken at final follow-up.

Results

At a mean follow-up of 5 years (range, 3-7 years), implant survival was 97.1% (95% confidence interval, 91.1-99.1%). Excellent postoperative KSS, WOMAC, OKS and FJS scores were obtained. Postoperative radiography was available for 78 knees. RLL was observed in 10.3% of the cases, but no cases with complete RLLs were seen.

Conclusions

Favourable results were found for cementless, mobile-bearing UKA, with no aseptic loosening at an average follow-up of 5 years. Cementless UKA fixation may lead to a clinically "forgotten joint" and may decrease the rate of RLLs.

Revision of Unicompartmental to Total Knee Arthroplasty: Does the Unicompartmental Implant (Metal-Backed vs All-Polyethylene) Impact the Total Knee Arthroplasty?

BACKGROUND

The aim of this study is to investigate differences in implant requirement, outcomes, and re-revision when total knee arthroplasty (TKA) was performed following unicompartmental knee arthroplasties (UKAs) with metal-backed (MB) compared to all-polyethylene (AP) tibial components.

METHODS

Retrospective study of 60 UKAs converted to 60 TKAs at mean 7.3 years (0.1 to 17) after implantation in 55 patients (mean age, 64 [49-83]; 44% male): 44 MB and 16 AP. TKA implant requirement was investigated in addition to mode of failure, Oxford Knee Score, and TKA survival at mean 5.4 years (0.5 to 17).

RESULTS

Progression of osteoarthritis was the commonest mode of failure in MB UKAs (P = .03) and unexplained pain in AP (P = .011) where revisions were performed earlier (4.8 ± 3.2 vs 8.2 ± 4.5, P = .012). In 56 of 60 (93%) cases, unconstrained TKA implants were used. The use of standard cruciate-retaining TKAs without augments or stems was less likely following MB UKA compared to AP (12 of 38 [32%] vs 10/14 [71%], P = .013). Specifically MB UKA implants were associated with more tibial stem use (P = .04) and more use of cruciate-substituting polyethylene (P = .05). There was no difference in the use of constrained implants. Multivariate analysis showed tibial resection depth to predict stem requirement. Seven were re-revised giving 7-year TKA survival: from MB UKA 70.3 (95% CI, 47.0 to 93.6) and from AP UKA 87.5 (95% CI, 64.6 to 100; P = .191).

CONCLUSION

MB UKA implants increase the chances of a complex revision requiring tibial stems and cruciate substitution but reduce the chances of early revision compared to AP UKA which often fail early with pain.

Optimal interference of the tibial component of the cementless Oxford Unicompartmental Knee Replacement

Objectives

The primary stability of the cementless Oxford Unicompartmental Knee Replacement (OUKR) relies on interference fit (or press fit). Insufficient interference may cause implant loosening, whilst excessive interference could cause bone damage and fracture.

The aim of this study was to identify the optimal interference fit by measuring the force required to seat the tibial component of the cementless OUKR (push-in force) and the force required to remove the component (pull-out force).

Materials and Methods

Six cementless OUKR tibial components were implanted in 12 new slots prepared on blocks of solid polyurethane foam (20 pounds per cubic foot (PCF), Sawbones, Malmo, Sweden) with a range of interference of 0.1 mm to 1.9 mm using a Dartec materials testing machine HC10 (Zwick Ltd, Herefordshire, United Kingdom) . The experiment was repeated with cellular polyurethane foam (15 PCF), which is a more porous analogue for trabecular bone.

Results

The push-in force progressively increased with increasing interference. The pull-out force was related in a non-linear fashion to interference, decreasing with higher interference. Compared with the current nominal interference, a lower interference would reduce the push-in forces by up to 45% (p < 0.001 One way ANOVA) ensuring comparable (or improved) pull-out forces (p > 0.05 Bonferroni post hoc test). With the more porous bone analogue, although the forces were lower, the relationship between interference and push-in and pull-out force were similar.

Conclusions

This study suggests that decreasing the interference fit of the tibial component of the cementless OUKR reduces the push-in force and can increase the pull-out force. An optimal interference fit may both improve primary fixation and decrease the risk of fracture.

Cite this article: S. Campi, S. J. Mellon, D. Ridley, B. Foulke, C. A. F. Dodd, H. G. Pandit, D. W. Murray. Optimal interference of the tibial component of the cementless Oxford Unicompartmental Knee Replacement. Bone Joint Res 2018;7:226–231. DOI: 10.1302/2046-3758.73.BJR-2017-0193.R1.

New insights into the biomechanics of Legg-Calvé-Perthes' disease: The Role of Epiphyseal Skeletal Immaturity in Vascular Obstruction

Objectives

Legg–Calvé–Perthes’ disease (LCP) is an idiopathic osteonecrosis of the femoral head that is most common in children between four and eight years old. The factors that lead to the onset of LCP are still unclear; however, it is believed that interruption of the blood supply to the developing epiphysis is an important factor in the development of the condition.

Methods

Finite element analysis modelling of the blood supply to the juvenile epiphysis was investigated to understand under which circumstances the blood vessels supplying the femoral epiphysis could become obstructed. The identification of these conditions is likely to be important in understanding the biomechanics of LCP.

Results

The results support the hypothesis that vascular obstruction to the epiphysis may arise when there is delayed ossification and when articular cartilage has reduced stiffness under compression.

Conclusion

The findings support the theory of vascular occlusion as being important in the pathophysiology of Perthes disease.

Cite this article: M. Pinheiro, C. A. Dobson, D. Perry, M. J. Fagan. New insights into the biomechanics of Legg-Calvé-Perthes’ disease: The Role of Epiphyseal Skeletal Immaturity in Vascular Obstruction. Bone Joint Res 2018;7:148–156. DOI: 10.1302/2046-3758.72.BJR-2017-0191.R1.

Ten-year survival and patient-reported outcomes of a medial unicompartmental knee arthroplasty incorporating an all-polyethylene tibial component

INTRODUCTION

Biomechanical studies have suggested that proximal tibial strain is elevated in UKAs incorporating all-polyethylene tibial components with concern that this leads to premature failure. This study reports minimum 10-year outcomes for a UKA incorporating an all-polyethylene tibial component to determine whether these concerns were realised.

MATERIALS AND METHODS

109 fixed bearing UKAs (97 patients, mean age 68 (range 48-87), 54/97 (56%) female) with all-polyethylene tibial components were followed up for ≥ 10 years with Oxford Knee Scores, Forgotten Joint Scores and Kaplan-Meier analysis. 106/109 implants were 7 mm, 3 were 9.5 mm.

RESULTS

Ten-year survival was 85.5% (78.6-92.4 95% CI) with the end-point failure for any reason. Unexplained pain was the commonest mode of failure (6/17) followed by lateral compartment osteoarthritis (5/17) and tibial subsidence/loosening (4/17). Revision rate was highest at 2-5 years due to revisions for unexplained pain. Ten-year survival was worse in patients < 65 years old (p = 0.035), in those with BMI > 30 (p = 0.017) and in those with postoperative increases in medial tibial sclerosis (p < 0.001 log-rank). Implant malalignment was not significantly associated with failure. Radioisotope bone scans in 16 patients all remained "hot" at mean 6.1 years (range 2.1-11.5). Relative risk of failure in patients < 65 years was 2.9 (1.2-7.0 95% CI) and when BMI > 30 was 2.9 (1.2-6.9 95% CI). In those with intact UKAs at 10 years, mean Oxford Knee Score was 34.8 ± 10.7, Forgotten Joint Score was 37.9 ± 26.7 and 96% were satisfied with their knee.

CONCLUSION

The high rate of early failure between 2 and 5 years in this all-polyethylene tibial component UKA did not persist in the long term. Though medial proximal tibial metabolic changes appear to persist they are not necessarily symptomatic. BMI > 30 and age < 65 years were significant risk factors for revision.