The combination of silver-containing hydroxyapatite coating and vancomycin has a synergistic antibacterial effect on methicillin-resistant Staphylococcus aureus biofilm formation

Efficacy of Commercially Available Irrigation Solutions on Removal of Staphylococcus Aureus and Biofilm From Porous Titanium Implants: An In Vitro Study

BACKGROUND

Periprosthetic joint infection remains a major problem. The bactericidal efficacy of commercial irrigation solutions for the treatment of infection is not well established in the presence of porous titanium (Ti) implants. This study compared the in vitro efficacy of five irrigation solutions on infected three-dimensional-printed porous Ti discs.

METHODS

Titanium discs (2 × 4 mm, 400, 700, and 1,000 μm) were infected with S. aureus (1 × 106 colony-forming unit/mL) and incubated for 3 hours or 3 days to create acute or chronic infection with biofilm. Discs were irrigated with saline, antibiotic, or antiseptic solutions, then repeatedly sonicated. Sonicates were cultured for bacterial quantification. Statistical analyses were performed using one-way analysis of variance (ANOVA), followed by Tukey-Kramer post hoc testing (P < .05 significance). Biofilms were visualized by scanning electron microscopy.

RESULTS

Saline irrigation was ineffective in both groups. In acute infections with 400 μm pores, differences were found with saline versus solution #3 (P = .015) and #4 (P = .015). Solution #4 had the lowest bacterial counts for all pore sizes. For biofilm, irrigation with saline, solutions #1, #2, and #3 inadequately cleared bacteria in all pore sizes. Lower remaining concentrations were observed in #4 with 400μm pores compared to saline (P = .06) and #2 (P = .039). The scanning electron microscopy showed a reduction of biofilm in samples washed with #4.

CONCLUSIONS

Irrigation of infected porous Ti discs with saline, solutions #1 and #2 failed to reduce the bacterial load. The 400 μm discs consistently had more bacteria despite irrigation, highlighting the difficulty of removing bacteria from small pores. Solutions #3 and #4 reduced bacteria acutely, but only #4 demonstrated efficacy in clearing biofilm compared to saline. These results should be considered when treating periprosthetic joint infection in the presence of porous components and the potential presence of biofilm.

Triple Encapsulation and Controlled Release of Vancomycin, Rifampicin and Silver from Poly (Methyl Methacrylate) or Poly (Lactic-Co-Glycolic Acid) Nanofibers

Although the incidence of infections in orthopedic surgeries, including periprosthetic surgeries, remains low at approximately 1-2%, the number of surgeries and the incidence of drug-resistant bacteria is increasing. The cost and morbidity associated with revision surgeries are huge. More effective drug combinations and delivery methods are urgently needed. In this paper, three anti-infective drugs (vancomycin, rifampicin, and silver sulfadiazine) have been jointly and effectively electrospun in thin (0.1 mm) flexible nanofiber mats of either poly (methyl methacrylate) (PMMA) or poly (lactic-co-glycolic acid) (PLGA). The inclusion of poly (ethylene glycol) (PEG) enabled optimal drug release with a reduced water contact angle for wetting. The controlled release of these three agents from 20% PEG (w/w to polymer)-blended PMMA or PLGA nanofiber mats may allow for the prophylactical prevention of implant-related infections or provide methods to treat orthopedic infections at the time of revision surgeries. These combinations of drugs provide excellent additive or synergistic antibiotic action against a broader spectrum of bacteria than each drug alone.

Ionized jet deposition of silver nanostructured coatings: Assessment of chemico-physical and biological behavior for application in orthopedics

Infection is one of the main issues connected to implantation of biomedical devices and represents a very difficult issue to tackle, for clinicians and for patients. This study aimed at tackling infection through antibacterial nanostructured silver coatings manufactured by Ionized Jet Deposition (IJD) for application as new and advanced coating systems for medical devices. Films composition and morphology depending on deposition parameters were investigated and their performances evaluated by correlating these properties with the antibacterial and antibiofilm efficacy of the coatings, against Escherichia coli and Staphylococcus aureus strains and with their cytotoxicity towards human cell line fibroblasts. The biocompatibility of the coatings, the nanotoxicity, and the safety of the proposed approach were evaluated, for the first time, in vitro and in vivo by rat subcutaneous implant models. Different deposition times, corresponding to different thicknesses, were selected and compared. All silver coatings exhibited a highly homogeneous surface composed of nanosized spherical aggregates. All coatings having a thickness of 50 nm and above showed high antibacterial efficacy, while none of the tested options caused cytotoxicity when tested in vitro. Indeed, silver films impacted on bacterial strains viability and capability to adhere to the substrate, in a thickness-dependent manner. The nanostructure obtained by IJD permitted to mitigate the toxicity of silver, conferring strong antibacterial and anti-adhesive features, without affecting the coatings biocompatibility. At the explant, the coatings were still present although they showed signs of progressive dissolution, compatible with the release of silver, but no cracking, delamination or in vivo toxicity was observed.

A novel antibacterial compound decreases MRSA biofilm formation without the use of antibiotics in a murine model

Despite significant advancements in material science, surgical site infection (SSI) rates remain high and prevention is key. This study aimed to demonstrate the in vivo safety and antibacterial efficacy of titanium implants treated with a novel broad-spectrum biocidal compound (DBG21) against methicillin-resistant Staphylococcus aureus (MRSA). Titanium (Ti) discs were covalently bound with DBG21. Untreated Ti discs were used as controls. All discs were implanted either untreated for 44 control mice or DBG21-treated for 44 treated mice. After implantation, 1 × 107 colony forming units (CFU) of MRSA were injected into the operating site. Mice were killed at 7 and 14 days to determine the number of adherent bacteria (biofilm) on implants and in the peri-implant surrounding tissues. Systemic and local toxicity were assessed. At both 7 and 14 days, DBG21-treated implants yielded a significant decrease in MRSA biofilm (3.6 median log10 CFU [99.97%] reduction [p < 0.001] and 1.9 median log10 CFU [98.7%] reduction [p = 0.037], respectively) and peri-implant surrounding tissues (2.7 median log10 CFU/g [99.8%] reduction [p < 0.001] and 5.6 median log10 CFU/g [99.9997%] reduction [p < 0.001], respectively). There were no significant differences between control and treated mice in terms of systemic and local toxicity. DBG-21 demonstrated a significant decrease in the number of biofilm bacteria without associated toxicity in a small animal implant model of SSI. Preventing biofilm formation has been recognized as a key element of preventing implant-related infections.

Implant Surface Technologies to Prevent Surgical Site Infections in Spine Surgery

Spine surgeries are occurring more frequently worldwide. Spinal implant infections are one of the most common complications of spine surgery, with a rate of 0.7% to 11.9%. These implant-related infections are a consequence of surface polymicrobial biofilm formation. New technologies to combat implant-related infections are being developed as their burden increases; however, none have reached the market stage in spine surgery. Conferring antimicrobial properties to biomaterials relies on either surface coating (physical, chemical, or combined) or surface modification (physical, chemical, or combined). Such treatment can also result in toxicity and the progression of antimicrobial resistance. This narrative review will discuss "late-stage" antimicrobial technologies (mostly validated in vivo) that use these techniques and may be incorporated onto spine implants to decrease the burden of implant-related health care-acquired infections (HAIs). Successfully reducing this burden will greatly improve the quality of life in spine surgery. Familiarity with upcoming surface technologies will help spine surgeons understand the anti-infective strategies designed to address the rapidly worsening challenge of implant-related health care-acquired infections.

Long-term antibacterial activity of silver-containing hydroxyapatite coatings against Staphylococcus aureus in vitro and invivo

BACKGROUND

The potential of silver-containing hydroxyapatite (Ag-HA) coatings to prevent orthopaedic implant-associated infection was explored previously; however, the resistance of Ag-HA coatings to late-onset orthopaedic infections is unknown. This study aimed to evaluate the long-term Ag+ elution and antibacterial properties of the Ag-HA coatings through in vitro and in vivo experiments.

METHODS

Ag-HA-coated disc specimens were immersed in fetal bovine serum (FBS) for six months. Ag concentration was measured over time using inductively coupled plasma-mass spectrometry to evaluate Ag release. The hydroxyapatite (HA)- or Ag-HA-coated disc specimens were immersed in FBS for 3 months to elute Ag+ for in vitro experiments. Methicillin-resistant Staphylococcus aureus (MRSA) suspensions were inoculated onto each disc; after 48 h, the number of colonies and the biofilm volume were measured. HA- or Ag-HA-coated disc specimens were inserted under the skin of Sprague-Dawley rats for three months for in vivo experiments. In in vivo experiment 1, specimens were inoculated with MRSA and the number of colonies was counted after 48 h. In in vivo experiment 2, the specimens were inoculated with bioluminescent S. aureus Xen36 cells, and bioluminescence was measured using an in vivo imaging system.

RESULTS

The Ag-HA-coated disc specimens continued to elute Ag+ after six months. The biofilm volume in the Ag-HA group was lower than in the HA group. In in vitro and in vivo experiment 1, the bacterial counts in the Ag-HA group were lower than those in the HA group. In in vivo experiment 2, the bioluminescence in the Ag-HA group was lower than that in the HA group on days 1-7 after inoculation.

CONCLUSIONS

The Ag-HA-coated discs continued to elute Ag+ for a long period and exhibited antibacterial activity and inhibition of biofilm formation against S. aureus. The Ag-HA coatings have the potential to reduce late-onset orthopaedic implant-associated infections.

Animal experimental investigation on the efficacy of antibiotic therapy with linezolid, vancomycin, cotrimoxazole, and rifampin in treatment of periprosthetic knee joint infections by MRSA

Aims

Periprosthetic joint infections (PJIs) are rare, but represent a great burden for the patient. In addition, the incidence of methicillin-resistant Staphylococcus aureus (MRSA) is increasing. The aim of this rat experiment was therefore to compare the antibiotics commonly used in the treatment of PJIs caused by MRSA.

Methods

For this purpose, sterilized steel implants were implanted into the femur of 77 rats. The metal devices were inoculated with suspensions of two different MRSA strains. The animals were divided into groups and treated with vancomycin, linezolid, cotrimoxazole, or rifampin as monotherapy, or with combination of antibiotics over a period of 14 days. After a two-day antibiotic-free interval, the implant was explanted, and bone, muscle, and periarticular tissue were microbiologically analyzed.

Results

Vancomycin and linezolid were able to significantly (p < 0.05) reduce the MRSA bacterial count at implants. No significant effect was found at the bone. Rifampin was the only monotherapy that significantly reduced the bacterial count on implant and bone. The combination with vancomycin or linezolid showed significant efficacy. Treatment with cotrimoxazole alone did not achieve a significant bacterial count reduction. The combination of linezolid plus rifampin was significantly more effective on implant and bone than the control group in both trials.

Conclusion

Although rifampicin is effective as a monotherapy, it should not be used because of the high rate of resistance development. Our animal experiments showed the great importance of combination antibiotic therapies. In the future, investigations with higher case numbers, varied bacterial concentrations, and changes in individual drug dosages will be necessary to be able to draw an exact comparison, possibly within a clinical trial.

Cite this article: Bone Joint Res 2022;11(3):143–151.

Fitting pieces into the puzzle: The impact of titanium-based dental implant surface modifications on bacterial accumulation and polymicrobial infections

Polymicrobial infection is the main cause of dental implant failure. Although numerous studies have reported the ability of titanium (Ti) surface modifications to inhibit microbial adhesion and biofilm accumulation, the majority of solutions for the utilization of Ti antibacterial surfaces have been testedin in vitro and animal models, with only a few developed surfaces progressing into clinical research. Motivated by this huge gap, we critically reviewed the scientific literature on the existing antibacterial Ti surfaces to help understand these surfaces' impact on the "puzzle" of undesirable dental implant-related infections. This manuscript comprises three main sections: (i) a narrative review on topics related to oral biofilm formation, bacterial-implant surface interactions, and on how implant-surface modifications can influence microbial accumulation; (ii) a critical evidence-based review to summarize pre-clinical and clinical studies in an attempt to "fit pieces into the puzzle" to unveil the best way to reduce microbial loads and control polymicrobial infection around dental implants showed by the current in vivo evidence; and (iii) discussion and recommendations for future research testing emerging antibacterial implant surfaces, connecting basic science and the requirements for future clinical translation. The findings of the present review suggest no consensus regarding the best available Ti surface to reduce bacterial colonization on dental implants. Smart release or on-demand activation surface coatings are a "new piece of the puzzle", which may be the most effective alternative for reducing microbial colonization on Ti surfaces, and future studies should focus on these technologies.

Recent Strategies to Combat Infections from Biofilm-Forming Bacteria on Orthopaedic Implants

Biofilm-related implant infections (BRII) are a disastrous complication of both elective and trauma orthopaedic surgery and occur when an implant becomes colonised by bacteria. The definitive treatment to eradicate the infections once a biofilm has established is surgical excision of the implant and thorough local debridement, but this carries a significant socioeconomic cost, the outcomes for the patient are often poor, and there is a significant risk of recurrence. Due to the large volumes of surgical procedures performed annually involving medical device implantation, both in orthopaedic surgery and healthcare in general, and with the incidence of implant-related infection being as high as 5%, interventions to prevent and treat BRII are a major focus of research. As such, innovation is progressing at a very fast pace; the aim of this study is to review the latest interventions for the prevention and treatment of BRII, with a particular focus on implant-related approaches.

Efficacy of common antiseptic solutions against clinically relevant microorganisms in biofilm

AIMS

Periprosthetic joint infections (PJIs) are among the most devastating complications after joint arthroplasty. There is limited evidence on the efficacy of different antiseptic solutions on reducing biofilm burden. The purpose of the present study was to test the efficacy of different antiseptic solutions against clinically relevant microorganisms in biofilm.

METHODS

We conducted an in vitro study examining the efficacy of several antiseptic solutions against clinically relevant microorganisms. We tested antiseptic irrigants against nascent (four-hour) and mature (three-day) single-species biofilm created in vitro using a drip-flow reactor model.

RESULTS

With regard to irrigant efficacy against biofilms, Povidone-iodine treatment resulted in greater reductions in nascent MRSA biofilms (logarithmic reduction (LR) = 3.12; p < 0.001) compared to other solutions. Bactisure treatment had the greatest reduction of mature Pseudomonas aeruginosa biofilms (LR = 1.94; p = 0.032) and a larger reduction than Vashe or Irrisept for mature Staphylococcus epidermidis biofilms (LR = 2.12; p = 0.025). Pooled data for all biofilms tested resulted in Bactisure and Povidone-iodine with significantly greater reductions compared to Vashe, Prontosan, and Irrisept solutions (p < 0.001).

CONCLUSION

Treatment failure in PJI is often due to failure to clear the biofilm; antiseptics are often used as an adjunct to biofilm clearance. We tested irrigants against clinically relevant microorganisms in biofilm in vitro and showed significant differences in efficacy among the different solutions. Further clinical outcome data is necessary to determine whether these solutions can impact PJI outcome in vivo. Cite this article: Bone Joint J 2021;103-B(5):908-915.

The antimicrobial activity and biocompatibility of a controlled gentamicin-releasing single-layer sol-gel coating on hydroxyapatite-coated titanium

Aims

The aim of this study was to develop a single-layer hybrid organic-inorganic sol-gel coating that is capable of a controlled antibiotic release for cementless hydroxyapatite (HA)-coated titanium orthopaedic prostheses.

Methods

Coatings containing gentamicin at a concentration of 1.25% weight/volume (wt/vol), similar to that found in commercially available antibiotic-loaded bone cement, were prepared and tested in the laboratory for: kinetics of antibiotic release; activity against planktonic and biofilm bacterial cultures; biocompatibility with cultured mammalian cells; and physical bonding to the material (n = 3 in all tests). The sol-gel coatings and controls were then tested in vivo in a small animal healing model (four materials tested; n = 6 per material), and applied to the surface of commercially pure HA-coated titanium rods.

Results

The coating released gentamicin at > 10 × minimum inhibitory concentration (MIC) for sensitive staphylococcal strains within one hour thereby potentially giving effective prophylaxis for arthroplasty surgery, and showed > 99% elution of the antibiotic within the coating after 48 hours. There was total eradication of both planktonic bacteria and established bacterial biofilms of a panel of clinically relevant staphylococci. Mesenchymal stem cells adhered to the coated surfaces and differentiated towards osteoblasts, depositing calcium and expressing the bone marker protein, osteopontin. In the in vivo small animal bone healing model, the antibiotic sol-gel coated titanium (Ti)/HA rod led to osseointegration equivalent to that of the conventional HA-coated surface.

Conclusion

In this study we report a new sol-gel technology that can release gentamicin from a bioceramic-coated cementless arthroplasty material. In vitro, local gentamicin levels are in excess of what can be achieved by antibiotic-loaded bone cement. In vivo, bone healing in an animal model is not impaired. This, thus, represents a biomaterial modification that may have the potential to protect at-risk patients from implant-related deep infection.

Cite this article: Bone Joint J 2021;103-B(3):522–529.

Time-dependent efficacy of combination of silver-containing hydroxyapatite coating and vancomycin on methicillin-resistant Staphylococcus aureus biofilm formation in vitro

OBJECTIVE

We developed a silver-containing hydroxyapatite (Ag-HA) coating to prevent periprosthetic joint infection (PJI). Methicillin-resistant Staphylococcus aureus (MRSA) is the main PJI-causing bacteria. Previously, we had reported the combined effect of Ag-HA coating and vancomycin (VCM) on MRSA biofilm formation 24 h after MRSA inoculation. In this study, we investigated the time-dependent efficacy of Ag-HA coating and VCM on MRSA biofilm formation on Ti discs in vitro by three-dimensional confocal laser scanning microscopic analysis.

RESULTS

For the Ti VCM and HA VCM groups, the total biofilm volumes per area at 96 h after MRSA inoculation were significantly larger than those at 48 h after MRSA inoculation, respectively (p < 0.001). In contrast, for the Ag-HA VCM group, the total biofilm volume per area at 96 h was significantly smaller than that at 48 h (p < 0.0001). Moreover, 96 h after MRSA inoculation, the total biofilm volume per area of the Ag-HA VCM groups was significantly smaller than those of the Ti VCM and HA VCM groups (p < 0.0001). Thus, the combination of Ag-HA and VCM might be useful for the prevention of MRSA-associated PJI.

Protecting the skin-implant interface with transcutaneous silver-coated skin-and-bone-integrated pylon in pig and rabbit dorsum models

Implant-associated soft tissue infections at the skin-implant interface represent the most frequent complications in reconstructive surgery and lead to implant failures and revisions. Titanium implants with deep porosity, called skin-and-bone-integrated-pylons (SBIP), allow for skin ingrowth in the morphologically natural direction, thus restoring a reliable dermal barrier and reducing the risk of infection. Silver coating of the SBIP implant surface using physical vapor deposition technique offers the possibility of preventing biofilm formation and exerting a direct antimicrobial effect during the wound healing phase. In vivo studies employing pig and rabbit dorsum models for assessment of skin ingrowth into the pores of the pylon demonstrated the safety of transcutaneous implantation of the SBIP system. No postoperative complications were reported at the end of the follow-up period of 6 months. Histological analysis proved skin ingrowth in the minipig model without signs of silver toxicity. Analysis of silver release (using energy dispersive X-ray spectroscopy) in the model of intramedullary-inserted silver-coated SBIP in New Zealand rabbits demonstrated trace amounts of silver after 3 months of in-bone implantation. In conclusion, selected temporary silver coating of the SBIP implant surface is powerful at preventing the periprosthetic infections without imparing skin ingrowth and can be considered for clinical application.