Adverse reaction to metal debris due to fretting corrosion between the acetabular components of modular dual-mobility constructs in total hip replacement: a systematic review and meta-analysis

Does-dual mobility still offer improved stability in smaller cup sizes? A computer modelling comparison of stability with 22-mm versus 28-mm inner heads in dual-mobility versus single-bearing constructs

PURPOSE

Dislocation remains 1 of the leading causes of revision after primary total hip arthroplasty (THA) and there is clear evidence the dual-mobility (DM) is used more frequently to minimise this. But in smaller cups, whether the use of DM with smaller 22-mm heads imparts any increased stability compared to standard bearing is unknown; especially when those smaller cups now allow for large single-bearing (SB) heads.

METHODS

3 primary cup sizes (48 mm, 50 mm, 52 mm) were chosen a priori for modelling. Head sizes trialled for the standard bearing (SB) constructs group were 28-0 mm, 32-0 mm and 36-0 mm against neutral polyethylene liners. In the modular sub-hemispheric DM constructs the inner head sizes for the DM constructs were altered where appropriate (22-0 mm vs. 28-0 mm). Cup position, stem offset, and stem size were standardised.

RESULTS

Both DM constructs outperformed all SB constructs because of a statistically significant jump distance increase (p < 0.001). However, there was no difference in range of motion (ROM) or jump distances between the 22-mm and 28-mm DM inner heads.The ROM angle before impingement between the DM (with 22-mm or 28-mm heads) and SB (with different head sizes where appropriate) showed no statistically significant difference. However, DM constructs presented significantly larger jump distances than SB constructs for both provocative dislocation tests across all 3 cup sizes.Of interest, for 50-mm and 52-mm cup sizes (for which this particular DM construct design can accommodate both 22-mm and 28-mm inner heads), there were no differences in ROM or jump distance between 22-mm versus 28-mm inner heads.

CONCLUSIONS

In this computer-modelling study, DM constructs are advantageous over SB constructs for improving jump distances in clinically provocative positions, but not range of motion angles. Inner head diameter of DM has no effect on stability.

Is There Safety Outside the "Safe Zone" in Total Hip Replacement? A Retrospective Observational Study

Background and Objectives: The safe zone in total hip replacement was introduced many years ago. Its aim was to provide guidelines for orthopedic surgeons in order to avoid complications such as instability. With the growing interest in spinopelvic alignment, some new insights suggest that the safe zone is an obsolete concept. This study aims to show that, even outside the safe zone, the effect of total hip replacement can be satisfactory. This could be used as preliminary study for an analysis of a larger group. Materials and Methods: Fifty-nine consecutive patients with end-stage osteoarthritis treated by total hip replacement were enrolled into the study and divided into two groups: inside the safe zone and outside the safe zone. A physical examination during postoperative visits was performed; the range of movement was measured using a goniometer; and the HHS and VAS were taken to measure functional outcomes and pain, respectively. An analysis of the radiological outcomes was performed. Results: There was no significant difference in regard to changes in total offset, pain, HHS and other complications. There were no signs of instability among patients during the follow-up. Conclusions: The results of this study show that the "safe zone" is a more complicated term that was previously thought. A proper soft tissue balance and spinopelvic alignment could be factors that change the "safe zone" for each patient and make it more individual.

The Performance of Primary Dual-Mobility Total Hip Arthroplasty in Patients Aged 55 Years and Younger: A Systematic Review

Background

Dual-mobility (DM) total hip arthroplasty (THA) combines the stabilization advantage provided by large head articulation with the low friction advantage provided by small head articulation. There is momentum for DM to be used in a wider selection of patients, with some advocating for DM to be the routine primary total hip construct. Further investigation is needed to determine whether the use of DM in younger adults is validated by aggregate data. Our objective was to review the literature for the clinical performance of DM THA in patients aged 55 years and younger.

Methods

A systematic review of the literature was performed according to the guidelines of Preferred Reporting in Systematic Reviews and Meta-Analyses. Inclusion in the review required clinical outcome reporting for DM primary THA in ambulatory patients aged 55 years or younger. The risk of bias was appraised using the Cochrane risk of bias in nonrandomized studies of interventions and the quality of the evidence was appraised using the Grading of Recommendations Assessment, Development and Evaluation framework.

Results

Across a sample of 1048 cases, the frequency weighted term of follow-up was 87.7 months. The pooled rate of revision was 9.5%. The Harris Hip Score significantly improved from 49.1 preoperatively to 93 postoperatively. The Postel-Merle d'Aubigné score significantly improved from 10.5 preoperatively to 17.1 postoperatively.

Conclusions

The literature demonstrates satisfactory short-term outcomes with a mitigated risk of dislocation for DM used as primary THA in patients aged 55 years and younger. The current findings suggest that third-generation designs provide reduced rates of intraprosthetic dislocation and improved survivorship.

Evolution and New Generation of Dual Mobility Cups

Although total hip arthroplasty (THA) is considered a successful procedure, hip dislocation remains the main cause of early failure. Dual mobility cups (DMCs) have been shown to significantly reduce the dislocation rate in both primary and revision THAs. During the past several decades, DMCs have evolved in design and fixation interface. There have been three generations of DMCs. This article addresses the rationale for a new cementless highly porous titanium DMC to improve component fixation and implant biocompatibility. [Orthopedics. 2023;46(5):e273-e280.].

Metallosis and Corrosion Associated With Revision Total Knee Arthroplasties With Metaphyseal Sleeves

Metallosis and corrosion have been associated with metal-on-metal and modular total hip arthroplasty but are rarely described in the setting of primary or revision total knee arthroplasty (TKA). In this series, we report on cases of metallosis due to mechanically assisted crevice corrosion at modular junctions of machined trunnion-bore tapers in a revision TKA system with metaphyseal sleeves. The unique design of metal modular junctions used in sleeve-based revision TKA, along with potential patient and surgical factors, may predispose these designs to fretting, corrosion, and adverse reaction to metal debris. We now consider metallosis and corrosion in the workup of painful or failed revision TKAs with sleeves. Future studies that investigate the incidence of this phenomenon may be warranted.

Is Modular Dual Mobility Superior to Standard Bearings for Reducing Dislocation Risk after Primary Total Hip Arthroplasty? A Retrospective Comparative Multicenter Study

BACKGROUND

Dual mobility (DM) has been proven to reduce dislocation risk after total hip arthroplasty (THA). In the last decade modular DM (modDM) constructs have been introduced to allow the use of DM articulation with standard cementless acetabular shells. However, clinical evidence of modDM effectiveness is still low in primary THA and concerns about implant-related complications are increasing. This retrospective comparative multicenter study is aimed to investigate if the dislocation rate after primary THA could be reduced with modDM in comparison to standard bearing (SB).

METHODS

262 THAs were performed between 2017 and 2019, using SB (129 hips) or modDM (133) with the same cementless highly porous modular acetabular cup. Dislocations, complications and revisions were recorded and implant survival was analyzed.

RESULTS

At 2.5-year mean follow-up, dislocation occurred in 4 hips (3.1%) within the SB group while intraprosthetic dislocation in 2 hips (1.5%) within the modDM group (p = 0.44). Implant survivals with revision due to dislocation were 95.2% and 95.9% at 4-year follow-up for SB and modDM, respectively (p = 0.50).

CONCLUSIONS

modDM used in primary THA might reduce dislocation rate in comparison to SB, even in high-risk patients, however, caution is advocated due to specific intraprosthetic dislocation.

Dual Mobility Total Hip Replacements in Young Patients- A Systematic Review

Background

There is little consensus on outcomes of dual Mobility total hip replacement (DM-THR) in younger patients. We performed a systematic review to examine this.

Methods

A systematic review of all observational studies and randomised controlled trials of patients under 70 with primary DM-THR in MEDLINE, EMBASE, Pubmed, Cochrane was performed according to PRISMA guidelines. Collected data included demographics, revision, dislocation and infection rates and functional scores.

Results

Twelve papers studying 738 DM-THR in 664 patients were included. The mean patient age was 46.9 years (13.5-69.0), with 319 (48.0%) being female and 419 (52.0%) being male. After an average follow-up of 90.0 months (1-371 months), the revision rate was 12.7% (84 hips), 0 dislocations were reported but 2.5% (15 hips) underwent intra-prosthetic dislocation. 32.1% hip revisions were due to aseptic loosening.

Conclusion

Limited literature surrounding the use of DM-THR suggests favourable stability but higher revision rates than conventional THR.

Direct Cementation of Dual Mobility Cups Into the Bony Acetabulum in Primary Total Hip Arthroplasty: Clinical and Radiographic Outcomes at a Minimum 5-Year Follow-Up

BACKGROUND

Cemented dual mobility cups (DMCs) are commonly used in combination with acetabular reinforcement devices. Indeed, according to literature, direct cementation of metal-backed acetabular components into the bony acetabulum remains controversial as this technique is potentially associated with increased rates of aseptic loosening. Therefore, this study aimed to evaluate the clinical and radiographic outcomes of DMC cemented into the bony acetabulum in primary total hip arthroplasty (THA).

METHODS

A total of 49 THA (48 patients, mean age 78 years [range, 51 to 91]) performed with direct cementation of a DMC into the bony acetabulum were prospectively included in our total joint registry and retrospectively reviewed. The clinical outcome was assessed using the Harris hip score (HHS). The radiographic outcome included measurement of component positioning and occurrence and progression of demarcation around the cemented DMC. Complications were reported with a particular attention to cemented fixation failure and aseptic loosening.

RESULTS

At a 7-year mean follow-up (range, 5 to 8), the pre-to postoperative HHS improved from 47 (range, 30 to 58) to 92 points (range, 80 to 98) (P < .01). Nonprogressive and focalized demarcations were observed in 7 THA (14%). Importantly, no progressive demarcation or DMC aseptic loosening was observed.

CONCLUSION

Direct cementation of DMC into the bony acetabulum ensured a stable fixation with no progressive demarcation or aseptic loosening at midterm follow-up. Therefore, this technique can be selectively considered in primary THA, especially in elderly or frail patients to avoid potential mechanical failure of press-fit fixation due to altered bone quality or additional morbidity related to the use of acetabular reinforcement devices.

Clinical Significance of Protective Motivation Intervention Nursing on Functional Recovery of Patients after Hip Arthroplasty

Objective

To explore the clinical significance of protective motivation intervention nursing on functional recovery of patients after hip arthroplasty.

Methods

Sixty patients after hip arthroplasty treated in our hospital from February 2019 to April 2021 were selected. The patients were randomly divided into the control group and the research group. The routine nursing mode was adopted in the control group, and the protective motivation intervention nursing mode was adopted in the research group. Nursing satisfaction, FIM score, Harris hip function score, WOMAC score, Barthel index score, and quality of life score were compared between the two groups.

Results

The nursing satisfaction of the research group was higher than that of the control group, and there are statistically significant differences between the groups (P < 0.05). The FIM scores of the research group at discharge and 1 month, 3 months, and 6 months after discharge were significantly higher than those in the control group. The Harris hip function score of the research group was significantly higher than that of the control group at discharge and 1 month, 3 months, and 6 months after discharge. The WOMAC scores of the research group at discharge and 1 month, 3 months, and 6 months after discharge were significantly lower than those in the control group, and the difference was statistically significant (P < 0.05). The scores of the Barthel index at discharge and 1 month, 3 months, and 6 months after discharge in the research group were significantly higher than those in the control group. The scores of physiological function, psychological function, social function, and health self-cognition in the research group were significantly lower than those in the control group, and the difference was statistically significant (P < 0.05).

Conclusion

The nursing model of protective motivation intervention for patients after hip arthroplasty can effectively improve the function of hip joint, improve the quality of life, promote the establishment of harmonious nurse-patient relationship, and play a positive role in improving the prognosis of patients.

Minimum Five-Year Outcomes of Modular Dual Mobility in Primary Total Hip Arthroplasty

BACKGROUND

Using a modular dual-mobility (MDM) bearing in primary total hip arthroplasty (THA) has not been widely evaluated. The purpose of this study is to evaluate clinical outcomes and survivorship following MDM bearings in primary THA.

METHODS

We used our registry database for patients with an MDM bearing on primary THA, performed by 6 surgeons through supine direct lateral or direct anterior approach. MDM bearings were used most often when impingement or subluxation was present intraoperatively despite proper component position. Another indication was a patient with planned activities who might be at a higher risk of instability postoperatively.

RESULTS

A total of 127 MDM bearings were used in primary THA in 119 patients. Mean follow-up was 6.77 years (range 5-8.9). Five hips were revised, none of which were due to MDM bearing failure. Preoperative Hip dysfunction and Osteoarthritis Outcome Score for Joint Replacement, Veterans RAND/Short Form 12 Physical Health Score and Mental Health Score increased from 25.81 to 52.40 (P < .0001), 30.42 to 44.50 (P < .0001), and 36.21 to 52.70 (P < .0001) at latest completed survey follow-up, respectively.

CONCLUSION

This MDM bearing shows excellent functional outcomes at a minimum 5 years of follow-up with no bearing-related failures. It can be an excellent choice in primary THA specifically in females where the use of increased head size to prevent instability is not possible due to anatomical restrictions and liner thickness.

Similar Outcomes Achieved Between Anterior and Posterior Approach Total Hip Arthroplasty Using Dual Mobility Implants

BACKGROUND

Dual mobility (DM) bearings for total hip arthroplasty (THA) have been proposed to reduce the risk of instability in high-risk patients; however, their utility in primary THA remains relatively unexplored. No previous reports have described whether surgical approach influences outcomes associated with DM implant systems. This study aims to compare patient reported outcomes and post-operative groin pain between patients undergoing anterior approach versus posterior approach following primary THA with DM implants.

METHODS

We retrospectively reviewed all patients who underwent primary THA and received a DM implant between 2011-2021. Patients were stratified into two cohorts based on surgical approach (anterior vs. posterior approach). Primary outcomes included the presence of substantial postoperative groin pain as well as readmission and revision rates. Demographic differences were assessed using chi-square and independent sample t-tests. Outcomes were compared using multilinear and logistic regressions.

RESULTS

Of the 495 patients identified, 55 (11%) underwent THA via the anterior approach and 440 (89%) via the posterior approach. Surgical time (100.24 vs. 109.42 minutes, p=0.070), length of stay (2.19vs.2.67 days,p=0.072), discharge disposition (p=0.151), and significant postoperative groin pain (1.8%vs.0.7%,p=0.966) did not statistically differ between the cohorts. 90-day readmission (9.1%vs.7.7%,p=0.823) and revision rate (0.0%vs.3.0%,p=0.993) did not significantly differ as well. Specifically, readmission (p=0.993) and revision (p=0.998) for instability did not significantly differ between the cohorts. We found no statistical difference in HOOS, JR (p=0.425), VR-12 PCS (p=0.718), and VR-12 MCS (p=0.257) delta score improvement from preoperative to 1-year follow-up between the two groups.

CONCLUSION

Comparable outcomes following implantation of DM constructs may be achievable irrespective of the surgical approach employed. The incidence of iliopsoas injections for groin pain did not significantly differ between anterior and posterior approaches. Future investigation is needed to determine whether surgical approach influences long-term outcomes in patients receiving DM implants. Level of Evidence: III.

Do Modular Dual Mobility Cups Offer a Reliable Benefit? Minimum 5-Year Follow-Up of 102 Cups

BACKGROUND

Among various options suggested to prevent hip instability after total hip replacement, the MDM-tritanium (modular dual mobility) cup features a cobalt-chrome liner (CoCr) positioned in a titanium acetabular shell and matched with a mobile insert in highly cross-linked annealed X3 polyethylene. The purpose of this study aimed to confirm whether there was no significant release of ions (Co and Cr) or higher occurrence of dislocation or even cases of aseptic loosening of the cementless shell with the use of MDM-tritanium cups at minimum of 5-year follow-up.

METHODS

The clinical study was carried out on a homogeneous consecutive and nonselective series with 102 MDM cups (98 patients) implanted in 2 centers. This MDM-tritanium cup had been systematically used for surgical revisions (70% of cases) or for patients with major hip dysplasia or in elderly patients with poor bone quality. A biological assessment of ion releases has been performed in a specific cohort of 39 cases that had an internal ceramic head.

RESULTS

None of the following complications was observed: no case of immunoallergic event, no aseptic loosening, and the dislocation rate was 4.9% involving only the difficult primary and revision cases. The clinical results were encouraging, with 89.7 points for Harris Hip Score, 41.16 points/48 for the OHS-12. The Agora Roentgenographic Assessment (ARA) radiologic score was graded "excellent" in 94.4%. The MDM-tritanium survivorship with revision for any cause in 102 cups at 7.95 years was 92.7%.

CONCLUSION

Based on the results of our first 102 cases, there were no immunoallergic complications-contrary to what was initially feared with the CoCr bearing-titanium pair-and no postoperative instability, including for complex primary and revisions total hip replacements.

LEVEL OF EVIDENCE

Individual Cohort Study: 2B.

Effect of Rehabilitation Nursing under the Guidance of the Health Action Process Approach Model on Perioperative Nursing Effect of Artificial Hip Arthroplasty: Effect on Promoting Quality of Life and Postoperative Rehabilitation

Objective

To explore the influence of rehabilitation nursing under the guidance of Health Action Process Approach (HAPA) model on the perioperative nursing effect of artificial hip replacement and to analyze the effect of this nursing model on the quality of life and postoperative rehabilitation of patients undergoing artificial hip replacement.

Methods

A total of 200 patients with hip arthroplasty treated in our hospital from January 2019 to July 2021 were enrolled. The patients were randomly assigned into the control group and study group. The former received routine nursing, and the latter received rehabilitation nursing under the guidance of the HAPA model. Nursing satisfaction, pain score, Harris hip function score, timed stand-up-walk test, MBI score, and quality of life score were compared.

Results

First of all, we compared the nursing satisfaction. In the study group, 86 cases were very satisfied, 8 cases were satisfied, and 6 cases were general; the satisfaction rate was 100%. In the control group, 48 cases were very satisfied, 22 cases were satisfied, 12 cases were general, and 18 cases were dissatisfied; the satisfaction rate was 82.0%. The nursing satisfaction in the study group was higher compared to that in the control group (P < 0.05). Secondly, we compared the pain scores. Before nursing, there exhibited no significant difference (P > 0.05). After nursing, the pain score of the two groups increased. Moreover, the pain score of the study group at discharge and 1 month, 3 months, and 6 months after operation was lower compared to that of the control group (P < 0.05). Before nursing, there exhibited no significant difference in the Harris hip joint function score (P > 0.05). After nursing, the Harris hip function score increased. Furthermore, the Harris hip function score of the study group at discharge and 1 month, 3 months, and 6 months after operation was higher compared to that of the control group (P < 0.05). In terms of the timed stand-up-walking test, there exhibited no significant difference before nursing (P > 0.05). After nursing, the time of the timed stand-up-walk test in both groups decreased. And the timed stand-up-walk test at discharge and 1 month, 3 months, and 6 months after operation in the study group was lower compared to that in the control group (P < 0.05). Compared with the MBI scores, there exhibited no significant difference before nursing (P > 0.05). After nursing, the MBI scores increased. Of note, the MBI scores of the study group at discharge and 1 month, 3 months, and 6 months after operation were higher compared to those of the control group (P < 0.05). Finally, we compared the scores of life quality. Before nursing, there exhibited no significant difference (P > 0.05). After nursing, the scores of life quality decreased. The scores of physiological function, psychological function, social function, and health self-cognition in the study group were lower compared to those in the control group (P < 0.05).

Conclusion

The perioperative rehabilitation nursing program of artificial hip replacement for the elderly based on the HAPA model is feasible, which can effectively enhance the functional recovery of hip joint, promote the ability of self-care of daily life, relieve pain and anxiety, and help to achieve dynamic balance and gait stability in the early stage. The rehabilitation program is better than routine nursing. As a new social cognitive model, the HAPA model is applied to the rehabilitation nursing environment of hip replacement from the aspect of social cognitive behavior, which can help to enhance the rehabilitation behavior of elderly patients, playing an important role in the rehabilitation effect of perioperative nursing.