Poly(β-Cyclodextrin) Prepared by Ring-Opening Metathesis Polymerization Enables Creation of Supramolecular Polymeric Networks

The controlled synthesis of polymers containing densely grafted cyclodextrin units has proven challenging due to the steric hindrance of these cyclic oligosaccharides. In this study, we report the controlled synthesis of poly(β-cyclodextrin) [poly(β-CD)] through ring-opening metathesis polymerization (ROMP) using Grubbs third-generation catalyst. Molecular weights of >10⁵ g/mol were obtained with dispersity values (Đ) of ≤1.2. In aqueous solution, β-cyclodextrin forms a host-guest complex with adamantyl groups (Ad). These interactions were utilized to prepare supramolecular polymer networks (SPNs) made by adding poly(β-CD) to α,ω-adamantyl-functionalized poly(2-hydroxyethyl acrylate) (Ad-PHEA-Ad). These poly(β-CD)/Ad-PHEA-Ad SPNs were prepared in aqueous solution and then dried to make homogeneous, transparent films. Varying the ratios of the two components enabled structure-property studies via tensile measurements.

Impact of Hydroxypropyl Methylcellulose Acetate Succinate Critical Aggregation Concentration on Celecoxib Supersaturation

Polymers play an important role in amorphous solid dispersions (ASDs), enhancing stability in the solid state and maintaining supersaturation in aqueous solutions of intrinsically low-water-soluble drug candidates. Hydroxypropyl methylcellulose acetate succinate (HPMCAS) is widely used in ASDs due to its hydrophobic/hydrophilic balance and ionizability of the substituent functionalities. While colloid formation of HPMCAS in solution due to this hydrophobic/hydrophilic balance has been studied, the impact of the polymer conformation (random coil vs aggregated) on drug supersaturation of ASDs is not well understood. To our knowledge, this is the first report where the critical aggregation concentration for three grades of HPMCAS (HF/MF/LF) has been determined via fluorescence spectroscopy using the environment-sensitive probe pyrene. The specific impact of polymer conformation (random coil vs aggregate) on the model drug celecoxib (CLX) has been elucidated with fluorescence quenching and nuclear magnetic resonance (NMR) spectroscopy. A negative deviation of the Stern-Volmer plot indicated that aggregated HPMCAS effectively blocked the quencher's access to CLX. This is further supported by NMR observations, where NMR spectra indicate a larger change of chemical shift of the -NH group of CLX when HPMCAS is above its aggregated concentration, suggesting strong H-bonding interactions between aggregated HPMCAS and CLX. Finally, the supersaturation-precipitation study shows that all three grades of HPMCAS in the aggregated state significantly enhanced CLX supersaturation compared to the nonaggregated state, indicating that polymer aggregation plays a critical role in maintaining drug supersaturation.

Strong Variation of Micelle-Unimer Coexistence as a Function of Core Chain Mobility

Polymeric micelles coexist in solution with unassembled chains (unimers). We have investigated the influence of glass transition temperature (T _g) (i.e., chain mobility) of the micelle core-forming blocks on micelle-unimer coexistence. We synthesized a series of seven PEG-b-P(nBA-ran-tBA) amphiphilic block copolymers (PEG = poly(ethylene glycol), nBA = n-butyl acrylate, tBA = tert-butyl acrylate) with similar molecular weights (12 kg/mol). Varying the nBA/tBA molar ratio enabled broad modulation of core block T _g with no significant change in core hydrophobicity or micelle size. NMR diffusometry revealed increasing unimer populations from 0% to 54% of total polymer concentration upon decreasing core block T _g from 25 to -46 °C. Additionally, unimer population at fixed polymer composition (and thus core T _g) increased with temperature. This study demonstrates the strong influence of core-forming block mobility on polymer self-assembly, providing information toward designing drug delivery systems and suggesting the need for new dynamical theory.

Peptide-Tetrapyrrole Supramolecular Self-Assemblies: State of the Art

The covalent and noncovalent association of self-assembling peptides and tetrapyrroles was explored as a way to generate systems that mimic Nature's functional supramolecular structures. Different types of peptides spontaneously assemble with porphyrins, phthalocyanines, or corroles to give long-range ordered architectures, whose structure is determined by the features of both components. The regular morphology and ordered molecular arrangement of these systems enhance the photochemical properties of embedded chromophores, allowing applications as photo-catalysts, antennas for dye-sensitized solar cells, biosensors, and agents for light-triggered therapies. Chemical modifications of peptide and tetrapyrrole structures and control over the assembly process can steer the organization and influence the properties of the resulting system. Here we provide a review of the field, focusing on the assemblies obtained from different classes of self-assembling peptides with tetrapyrroles, their morphologies and their applications as innovative functional materials.

The role of polysaccharides from natural resources to design oral insulin micro- and nanoparticles intended for the treatment of Diabetes mellitus: A review

Oral administration of insulin (INS) would represent a revolution in the treatment of diabetes, considering that this route mimics the physiological dynamics of endogenous INS. Nano- and microencapsulation exploiting the advantageous polysaccharides properties has been considered an important technological strategy to protect INS against harsh conditions of gastrointestinal tract, in the same time that improve the permeability via transcellular and/or paracellular pathways, safety and in some cases even selectivity for targeting delivery of INS. In fact, some polysaccharides also give to the systems functional properties such as pH-responsiveness, mucoadhesiveness under specific physiological conditions and increased intestinal permeability. In general, all polysaccharides can be functionalized with specific molecules becoming more selective to the cells to which INS is delivered. The present review highlights the advances in the past 10 years on micro- and nanoencapsulation of INS exploiting the unique natural properties of polysaccharides, including chitosan, starch, alginate, pectin, and dextran, among others.

The Pathway to Intelligence: Using Stimuli-Responsive Materials as Building Blocks for Constructing Smart and Functional Systems

Systems that are intelligent have the ability to sense their surroundings, analyze, and respond accordingly. In nature, many biological systems are considered intelligent (e.g., humans, animals, and cells). For man-made systems, artificial intelligence is achieved by massively sophisticated electronic machines (e.g., computers and robots operated by advanced algorithms). On the other hand, freestanding materials (i.e., not tethered to a power supply) are usually passive and static. Hence, herein, the question is asked: can materials be fabricated so that they are intelligent? One promising approach is to use stimuli-responsive materials; these "smart" materials use the energy supplied by a stimulus available from the surrounding for performing a corresponding action. After decades of research, many interesting stimuli-responsive materials that can sense and perform smart functions have been developed. Classes of functions discussed include practical functions (e.g., targeting and motion), regulatory functions (e.g., self-regulation and amplification), and analytical processing functions (e.g., memory and computing). The pathway toward creating truly intelligent materials can involve incorporating a combination of these different types of functions into a single integrated system by using stimuli-responsive materials as the basic building blocks.

Micelas de caseína: dos monômeros à estrutura supramolecular

Resumo A importância primária das micelas de caseína reside no fato de que os processos empregados na transformação do leite em quaisquer de seus derivados dependem, direta ou indiretamente, de sua estabilidade ou de sua desestabilização controlada. Assim, o objetivo do presente trabalho é apresentar uma revisão atualizada sobre a organização estrutural das micelas de caseína. Em termos físico-químicos, as micelas de caseína podem ser definidas como agregados supramoleculares esféricos e porosos, altamente hidratados, carregados negativamente, com diâmetro médio de 200 nm, e que apresentam aproximadamente 104 cadeias polipeptídicas. Além de água, as micelas são constituídas por quatro tipos de caseínas, chamadas de αS1, αS2, β, e κ-caseínas, que estão unidas por meio de interações hidrofóbicas e eletrostáticas, e pela presença de minerais, sobretudo sais de fosfato de cálcio, os quais são os principais responsáveis pela manutenção da estrutura micelar. A estabilidade das micelas de caseína é atribuída à presença de uma camada externa difusa, formada basicamente por κ-caseína. Apesar de as propriedades coloidais das micelas de caseína serem conhecidas, ainda não há consenso sobre como as moléculas de caseína estão estruturadas em seu interior. Portanto, os principais modelos que descrevem a organização interna das micelas de caseína são apresentados na parte final do artigo.

Small-angle X-ray scattering and light scattering study of hybrid nanoparticles composed of thermoresponsive triblock copolymer F127 and thermoresponsive statistical polyoxazolines with hydrophobic moieties

A combination of new thermoresponsive statistical polyoxazolines, poly[(2-butyl-2-oxazoline)-stat-(2-isopropyl-2-oxazoline)] [pBuOx-co-piPrOx], with different hydrophobic moieties and F127 surfactant as a template system for the creation of thermosensitive nanoparticles for radionuclide delivery has recently been tested [Pánek, Filippov, Hrubý, Rabyk, Bogomolova, Kučka & Stěpánek (2012).Macromol. Rapid Commun.33, 1683–1689]. It was shown that the presence of the thermosensitive F127 triblock copolymer in solution reduces nanoparticle size and polydispersity. This article focuses on a determination of the internal structure and solution properties of the nanoparticles in the temperature range from 288 to 312 K. Here, it is demonstrated that below the cloud point temperature (CPT) the polyoxazolines and F127 form complexes that co-exist in solution with single F127 molecules and large aggregates. When the temperature is raised above the CPT, nanoparticles composed of polyoxazolines and F127 are predominant in solution. These nanoparticles could be described by a spherical shell model. It was found that the molar weight and hydrophobicity of the polymer do not influence the size of the outer radius and only slightly change the inner radius of the nanoparticles. At the same time, molar weight and hydrophobicity did affect the process of nanoparticle formation. In conclusion, poly(2-oxazoline) molecules are fully incorporated inside of F127 micelles, and this result is very promising for the successful application of such systems in radionuclide delivery.