Trabecular bone response to mechanical and parathyroid hormone stimulation: the role of mechanical microenvironment

Diosmin, a citrus fruit-derived phlebotonic bioflavonoid protects rats from chronic kidney disease-induced loss of bone mass and strength without deteriorating renal function

Kidney Disease: Improving Global Outcomes (KDIGO) 2017 Clinical Practice Guideline recommended treatment decisions for patients with chronic kidney disease (CKD) with osteoporosis and/or high risk of fracture. Bisphosphonates, the first-line...

Osteocyte calcium signaling - A potential translator of mechanical load to mechanobiology

Osteocytes are embedded dendritic bone cells; by virtue of their position in bone tissue, ability to coordinate bone building osteoblasts and resorbing osteoclasts, and sensitivity to tissue level mechanical loading, they serve as the resident bone mechanosensor. The mechanisms osteocytes use to change mechanical loading into biological signals that drive tissue level changes has been well studied over the last 30 years, however the ways loading parameters are encoded at the cellular level are still not fully understood. Calcium signaling is a first messenger signal exhibited by osteocytes in response to mechanical forces. A body of work interrogating the mechanisms of osteocyte calcium signaling exists and is presently expanding, presenting the opportunity to better understand the relationship between calcium signaling characteristics and tuned osteocyte responses to tissue level strain features (e.g. magnitude, duration, frequency). This review covers the history of osteocyte load induced calcium signaling and highlights potential cellular mechanisms used by osteocytes to turn details about loading parameters into biological events.

Mechanical loading and parathyroid hormone effects and synergism in bone vary by site and modeling/remodeling regime

Intermittent injections of parathyroid hormone (PTH) and mechanical loading are both known to effect a net increase in bone mass. Fundamentally, bone metabolism can be divided into modeling (uncoupled formation or resorption) and remodeling (subsequent formation biologically coupled to resorption in space and time). Methods to delineate the bone response between these regimes are scant but have garnered recent attention and acceptance, and will be critical tools to properly assess short- and long-term efficacy of osteoporosis treatments. To this end, we employ a time-lapse micro-computed tomography strategy to quantify and localize modeling and remodeling volumes over 4 weeks of concurrent PTH treatment and mechanical loading. Modeled and remodeled volumes are probed for differences with respect to treatment, loading, and interactions thereof in trabecular and cortical bone compartments, which were further separated by plate/rod microarchitecture and periosteal/endosteal surfaces, respectively. Loading effects are further considered independently with regard to localized strain environments. Our findings indicate that in trabecular bone, PTH and loading stimulate anabolic modeling additively, and remodeling synergistically. PTH tends to lead to bone accumulation indiscriminate of trabecular microarchitecture, whereas loading tends to more strongly affect plates than rods. The cortical surfaces responded uniquely to PTH and loading, with synergistic effects on the periosteal surface for anabolic modeling, and on the endosteal surface for catabolic modeling. The increase in catabolic modeling due to loading, which is enhanced by PTH, is concentrated to areas of the endosteal surface under low strain and to our knowledge has not previously been reported. Taken together, the effects of PTH, loading, and their interactions, are shown to be dependent on the specific bone compartment and metabolic regime; this may explain some discrepancies in previously-reported findings.

Long-term pretreatment with alendronate inhibits calvarial defect healing in an osteoporotic rat model

INTRODUCTION

This study aimed to observe the effects of long-term alendronate pretreatment on the healing of osteoporotic calvarial defects, and further investigate the effect of alendronate combined with once-weekly parathyroid hormone following 12 weeks of alendronate treatment in ovariectomized rats.

MATERIALS AND METHODS

Thirty 3-month-old female rats were ovariectomized, and 24 rats received alendronate for 12 weeks. Then, a critical defect was created in the calvaria of all animals. Immediately after osteotomy, the animals received one of five treatments for 8 weeks: (1) continuation of vehicle (group E), (2) alendronate followed by vehicle (group A), (3) continuation of alendronate (group B), (4) alendronate followed by once-weekly parathyroid hormone alone (group C), or (5) continuation of alendronate combined with once-weekly parathyroid hormone (group D). Calvarial defect healing was assessed using dual-energy X-ray absorptiometry, micro-computed tomography, histology, and sequential fluorescence labeling.

RESULTS

Group E showed a significantly higher volume of newly formed bone than groups A, B, C, and D. Evidence of new dense bone formation in group E was observed histologically. In addition, the immunohistochemical expression of runt-related transcription factor 2 was increased in group E but inhibited in groups A, B, C, and D. Sequential immunofluorescence also showed inhibited mineral apposition in groups A, B, C, and D compared with group E.

CONCLUSION

The present study shows that long-term pretreatment with alendronate inhibited calvarial defect healing in osteoporotic rats, and this effect could not be reversed by stopping alendronate, switching to parathyroid hormone, or combining with once-weekly parathyroid hormone.

Anabolic Bone Stimulus Requires a Pre-Exercise Meal and 45-Minute Walking Impulse of Suprathreshold Speed-Enhanced Momentum to Prevent or Mitigate Postmenopausal Osteoporosis within Circadian Constraints

Osteoporosis currently afflicts 8 million postmenopausal women in the US, increasing the risk of bone fractures and morbidity, and reducing overall quality of life. We sought to define moderate exercise protocols that can prevent postmenopausal osteoporosis. Our previous findings singled out higher walking speed and pre-exercise meals as necessary for suppression of bone resorption and increasing of markers of bone formation. Since both studies were amenable to alternate biomechanical, nutritional, and circadian interpretations, we sought to determine the relative importance of higher speed, momentum, speed-enhanced load, duration of impulse, and meal timing on osteogenic response. We hypothesized that: (1) 20 min of exercise one hour after eating is sufficient to suppress bone resorption as much as a 40-min impulse and that two 20 min exercise bouts separated by 7 h would double the anabolic effect; (2) early morning exercise performed after eating will be as effective as mid-day exercise for anabolic outcome; and (3) the 08:00 h 40-min. exercise uphill would be as osteogenic as the 40-min exercise downhill. Healthy postmenopausal women, 8 each, were assigned to a no-exercise condition (SED) or to 40- or 20-min exercise bouts, spaced 7 h apart, for walking uphill (40 Up and 20 Up) or downhill (40 Down and 20 Down) to produce differences in biomechanical variables. Exercise was initiated at 08:00 h one hour after eating in 40-min groups, and also 7 h later, two hours after the midday meal, in 20-min groups. Measurements were made of CICP (c-terminal peptide of type I collagen), osteocalcin (OC), and bone-specific alkaline phosphatase (BALP), markers of bone formation, and of the bone resorptive marker CTX (c-terminal telopeptide of type 1 collagen). The osteogenic ratios CICP/CTX, OC/CTX, and BALP/CTX were calculated. Only the 40-min downhill exercise of suprathreshold speed-enhanced momentum, increased the three osteogenic ratios, demonstrating the necessity of a 40-min, and inadequacy of a 20-min, exercise impulse. The failure of anabolic outcome in 40-min uphill exercise was attributed to a sustained elevation of PTH concentration, as its high morning elevation enhances the CTX circadian rhythm. We conclude that postmenopausal osteoporosis can be prevented or mitigated in sedentary women by 45 min of morning exercise of suprathreshold speed-enhanced increased momentum performed shortly after a meal while walking on level ground, or by 40-min downhill, but not 40-min uphill, exercise to avoid circadian PTH oversecretion. The principal stimulus for the anabolic effect is exercise, but the prerequisite for a pre-exercise meal demonstrates the requirement for nutrient facilitation.

Feeding intervention potentiates the effect of mechanical loading to induce new bone formation in mice

The benefits of increased human lifespan depend upon duration of healthy, independent living; the healthspan. Bone-wasting disorders contribute significantly to loss of independence, frailty, and morbidity in older people. Therefore, there is an unmet need globally for lifestyle interventions to reduce the likelihood of bone fractures with age. Although many mechanisms are involved in disorders of bone loss, there is no single regulatory pathway and, therefore, there is no single treatment available to prevent their occurrence. Our aim in these studies was to determine whether fasting/feeding interventions alter the effect of mechanical loading on bone anabolic activities and increase bone mass. In young 17-week-old mice, 16-hour fasting period followed by reintroduction of food for 2 hours increased markedly the potency of mechanical loading, that mimics the effect of exercise, to induce new cortical bone formation. Consistent with this finding, fasting and re-feeding increased the response of bone to a loading stimulus that, alone, does not stimulate new bone formation in ad-lib fed mice. Older mice (20 months) experienced no potentiation of loading-induced bone formation with the same timing of feeding interventions. Interestingly, the pre-, prandial, and postprandial endocrine responses in older mice were different from those in young animals. The hormones that change in response to timing of feeding have osteogenic effects that interact with loading-mediated effects. Our findings indicate associations between timing of food ingestion and bone adaptation to loading. If translated to humans, such non-pharmacological lifestyle interventions may benefit skeletal health of humans throughout life-course and in older age.

Integration of clinical perspective into biomimetic bioreactor design for orthopedics

The challenges to accommodate multiple tissue formation metrics in conventional bioreactors have resulted in an increased interest to explore novel bioreactor designs. Bioreactors allow researchers to isolate variables in controlled environments to quantify cell response. While current bioreactor designs can effectively provide either mechanical, electrical, or chemical stimuli to the controlled environment, these systems lack the ability to combine all these stimuli simultaneously to better recapitulate the physiological environment. Introducing a dynamic and systematic combination of biomimetic stimuli bioreactor systems could tremendously enhance its clinical relevance in research. Thus, cues from different tissue responses should be studied collectively and included in the design of a biomimetic bioreactor platform. This review begins by providing a summary on the progression of bioreactors from simple to complex designs, focusing on the major advances in bioreactor technology and the approaches employed to better simulate in vivo conditions. The current state of bioreactors in terms of their clinical relevance is also analyzed. Finally, this review provides a comprehensive overview of individual biophysical stimuli and their role in establishing a biomimetic microenvironment for tissue engineering. To date, the most advanced bioreactor designs only incorporate one or two stimuli. Thus, the cell response measured is likely unrelated to the actual clinical performance. Integrating clinically relevant stimuli in bioreactor designs to study cell response can further advance the understanding of physical phenomenon naturally occurring in the body. In the future, the clinically informed biomimetic bioreactor could yield more efficiently translatable results for improved patient care.

The Role of the Loading Condition in Predictions of Bone Adaptation in a Mouse Tibial Loading Model

The in vivo mouse tibial loading model is used to evaluate the effectiveness of mechanical loading treatment against skeletal diseases. Although studies have correlated bone adaptation with the induced mechanical stimulus, predictions of bone remodeling remained poor, and the interaction between external and physiological loading in engendering bone changes have not been determined. The aim of this study was to determine the effect of passive mechanical loading on the strain distribution in the mouse tibia and its predictions of bone adaptation. Longitudinal micro-computed tomography (micro-CT) imaging was performed over 2 weeks of cyclic loading from weeks 18 to 22 of age, to quantify the shape change, remodeling, and changes in densitometric properties. Micro-CT based finite element analysis coupled with an optimization algorithm for bone remodeling was used to predict bone adaptation under physiological loads, nominal 12N axial load and combined nominal 12N axial load superimposed to the physiological load. The results showed that despite large differences in the strain energy density magnitudes and distributions across the tibial length, the overall accuracy of the model and the spatial match were similar for all evaluated loading conditions. Predictions of densitometric properties were most similar to the experimental data for combined loading, followed closely by physiological loading conditions, despite no significant difference between these two predicted groups. However, all predicted densitometric properties were significantly different for the 12N and the combined loading conditions. The results suggest that computational modeling of bone's adaptive response to passive mechanical loading should include the contribution of daily physiological load.

Activation of 4-1BB signaling in bone marrow stromal cells triggers bone loss via the p-38 MAPK-DKK1 axis in aged mice

Senile osteoporosis can cause bone fragility and increased fracture risks and has been one of the most prevalent and severe diseases affecting the elderly population. Bone formation depends on the proper osteogenic differentiation of bone marrow stromal cells (BMSCs) in the bone marrow microenvironment, which is generated by the functional relationship among different cell types in the bone marrow. With aging, bone marrow provides signals that repress osteogenesis. Finding the signals that oppose BMSC osteogenic differentiation from the bone marrow microenvironment and identifying the abnormal changes in BMSCs with aging are key to elucidating the mechanisms of senile osteoporosis. In a pilot experiment, we found that 4-1BBL and 4-1BB were more abundant in bone marrow from aged (18-month-old) mice than young (6-month-old) mice. Meanwhile, significant bone loss was observed in aged mice compared with young mice. However, very little data have been generated regarding whether high-level 4-1BB/4-1BBL in bone marrow was associated with bone loss in aged mice. In the current study, we found upregulation of 4-1BB in the BMSCs of aged mice, which resulted in the attenuation of the osteogenic differentiation potential of BMSCs from aged mice via the p38 MAPK-Dkk1 pathway. More importantly, bone loss of aged mice could be rescued through the blockade of 4-1BB signaling in vivo. Our study will benefit not only our understanding of the pathogenesis of age-related trabecular bone loss but also the search for new targets to treat senile osteoporosis.

Analysis of mechanotransduction dynamics during combined mechanical stimulation and modulation of the extracellular-regulated kinase cascade uncovers hidden information within the signalling noise

Osteoporosis is a bone disease characterized by brittle bone and increased fracture incidence. With ageing societies worldwide, the disease presents a high burden on health systems. Furthermore, there are limited treatments for osteoporosis with just two anabolic pharmacological agents approved by the US Food and Drug Administration. Healthy bones are believed to be maintained via an intricate relationship between dual biochemical and mechanical (bio-mechanical) stimulations. It is widely considered that osteoporosis emerges as a result of disturbances to said relationship. The mechanotransduction process is key to this balance, and disruption of its dynamics in bone cells plays a role in osteoporosis development. Nonetheless, the exact details and mechanisms that drive and secure the health of bones are still elusive at the cellular and molecular scales. This study examined the dual modulation of mechanical stimulation and mechanotransduction activation dynamics in an osteoblast (OB). The aim was to find patterns of mechanotransduction dynamics demonstrating a significant change that can be mapped to alterations in the OB responses, specifically at the level of gene expression and osteogenic markers such as alkaline phosphatase. This was achieved using a three-dimensional hybrid multiscale computational model simulating mechanotransduction in the OB and its interaction with the extracellular matrix, combined with a numerical analytical technique. The model and the analysis method predict that within the noise of mechanotransduction, owing to modulation of the bio-mechanical stimulus and consequent gene expression, there are unique events that provide signatures for a shift in the system's dynamics. Furthermore, the study uncovered molecular interactions that can be potential drug targets.

Purinergic Signaling Mediates PTH and Fluid Flow-Induced Osteoblast Proliferation

Both parathyroid hormone (PTH) and mechanical signals are able to regulate bone growth and regeneration. They also can work synergistically to regulate osteoblast proliferation, but little is known about the mechanisms how PTH and mechanical signals interact with each other during this process. In this study, we investigated responses of MC3T3-E1 osteoblasts to PTH and oscillatory fluid flow. We found that osteoblasts are more sensitive to mechanical signals in the presence of PTH according to ERK1/2 phosphorylation, ATP release, CREB phosphorylation, and cell proliferation. PTH may also reduce the osteoblast refractory period after desensitization due to mechanical signals. We further found that the synergistic responses of osteoblasts to fluid flow or ATP with PTH had similar patterns, suggesting that synergy between fluid flow and PTH may be through the ATP pathway. After we inhibited ATP effects using apyrase in osteoblasts, their synergistic responses to mechanical stimulation and PTH were also inhibited. Additionally, knocking down P2Y2 purinergic receptors can significantly attenuate osteoblast synergistic responses to mechanical stimulation and PTH in terms of ERK1/2 phosphorylation, CREB phosphorylation, and cell proliferation. Thus, our results suggest that PTH enhances mechanosensitivity of osteoblasts via a mechanism involving ATP and P2Y2 purinergic receptors.

Relating Bone Strain to Local Changes in Radius Microstructure Following 12 Months of Axial Forearm Loading in Women

Work in animal models suggests that bone structure adapts to local bone strain, but this relationship has not been comprehensively studied in humans. Here, we quantified the influence of strain magnitude and gradient on bone adaptation in the forearm of premenopausal women performing compressive forearm loading (n = 11) and nonloading controls (n = 10). High resolution peripheral quantitative computed tomography (HRpQCT) scans of the distal radius acquired at baseline and 12 months of a randomized controlled experiment were used to identify local sites of bone formation and resorption. Bone strain was estimated using validated finite element (FE) models. Trabecular strain magnitude and gradient were higher near (within 200 μm) formation versus resorption (p < 0.05). Trabecular formation and resorption occurred preferentially near very high (>95th percentile) versus low (<5th percentile) strain magnitude and gradient elements, and very low strain elements were more likely to be near resorption than formation (p < 0.05). In the cortical compartment, strain gradient was higher near formation versus resorption (p < 0.05), and both formation and resorption occurred preferentially near very high versus low strain gradient elements (p < 0.05). At most, 54% of very high and low strain elements were near formation or resorption only, and similar trends were observed in the control and load groups. These findings suggest that strain, likely in combination with other physiological factors, influences adaptation under normal loads and in response to a novel loading intervention, and represents an important step toward defining exercise interventions to maximize bone strength.

Is There a Governing Role of Osteocytes in Bone Tissue Regeneration?

PURPOSE OF REVIEW

Bone regeneration plays an important role in contemporary clinical treatment. Bone tissue engineering should result in successful bone regeneration to restore congenital or acquired bone defects in the human skeleton. Osteocytes are thought to have a governing role in bone remodeling by regulating osteoclast and osteoblast activity, and thus bone loss and formation. In this review, we address the so far largely unknown role osteocytes may play in bone tissue regeneration.

RECENT FINDINGS

Osteocytes release biochemical signaling molecules involved in bone remodeling such as prostaglandins, nitric oxide, Wnts, and insulin-like growth factor-1 (IGF-1). Treatment of mesenchymal stem cells in bone tissue engineering with prostaglandins (e.g., PGE₂, PGI₂, PGF_2α), nitric oxide, IGF-1, or Wnts (e.g., Wnt3a) improves osteogenesis. This review provides an overview of the functions of osteocytes in bone tissue, their interaction with other bone cells, and their role in bone remodeling. We postulate that osteocytes may have a pivotal role in bone regeneration as well, and consequently that the bone regeneration process may be improved effectively and rapidly if osteocytes are optimally used and stimulated.

Proliferating osteoblasts are necessary for maximal bone anabolic response to loading in mice

Following mechanical loading, osteoblasts may arise via activation, differentiation, or proliferation to form bone. Our objective was to ablate proliferating osteoblast lineage cells in order to investigate the importance of these cells as a source for loading-induced bone formation. We utilized 3.6Col1a1-tk mice in which replicating osteoblast lineage cells can be ablated in an inducible manner using ganciclovir (GCV). Male and female mice were aged to 5- and 12-months and subjected to 5 days of tibial compression. "Experimental" mice were tk-positive, treated with GCV; "control" mice were either tk-negative treated with GCV, or tk-positive treated with PBS. We confirmed that experimental mice had a decrease in tk-positive cells that arose from proliferation. Next, we assessed bone formation after loading to low (7N) and high (11N) forces and observed that periosteal bone formation rate in experimental mice was reduced by approximately 70% for both forces. Remarkably, woven bone formation induced by high-force loading was blocked in experimental mice. Loading-induced lamellar bone formation was diminished but not prevented in experimental mice. We conclude that osteoblast proliferation induced by mechanical loading is a critical source of bone forming osteoblasts for maximal lamellar formation and is essential for woven bone formation.

Mechanical Vibration Associated With Intermittent PTH Improves Bone Microarchitecture in Ovariectomized Rats

INTRODUCTION

Intermittent 1-34 parathyroid hormone (iPTH) administration, a bone-forming treatment, is widely used as a therapy for severe osteoporosis. It can only be used for a maximum of 24 mo and must be followed by an antiresorptive drug to retain the new formed tissue. Mechanical load, in the form of low-intensity and high-frequency vibration, has received considerable attention due to its ability to prevent bone loss.

AIM

To investigate the ability of whole body mechanical vibration (MV) to potentiate the anabolic effects of iPTH and to inhibit bone resorption following discontinuation of iPTH treatment in estrogen-deficient rats.

METHODOLOGY

Fifty-four 6-month-old female Wistar rats were ovariectomized (OVX) or sham-operated. After 5 mo, they were divided into 7 groups: Sham - non-OVX; Control - OVX, vehicle for 60 d; MV - OVX, submitted to MV for 60 d; PTH60d - OVX, injected with iPTH for 60 d; PTH+MV - OVX, injected with iPTH combined with MV for 60 d; PTH30d - OVX, injected with iPTH for 30 d, and untreated for 30 d; PTH30d/MV30d - OVX, injected with iPTH for 30 d, followed by MV for 30 d. Bone mineral density (BMD) and body composition (lean mass and fat) were evaluated at OVX (T0), the beginning (T1), and at the end (T2) of treatments by dual X-ray absorptiometry (DXA). Femurs were processed for histomorphometry (bone volume - BV/TV and cortical thickness - Ct.Th) and tibias for biomechanical test.

RESULTS

Body composition and BMD were similar among the groups at T0. In T2, MV presented higher fat than other groups (except PTH60d) and PTH30d/MV30d showed greater lean mass than Control. At T1, Sham presented the highest BMD, but between T1 vs T2 there was an increase in all iPTH-treated groups. At T2, BMD was higher in PTH60d and PTH+MV than in the Control and MV groups. The highest BV/TV was observed in the PTH+MV group, followed by PTH60d. Cortical thickness was increased in PTH60d and PTH+MV compared to Sham. Vibration applied post-iPTH (PTH30d/MV30d) improved the force at failure in tibias when compared to Sham and Control groups.

CONCLUSION

MV potentiated iPTH anabolic effects in cancellous bone; however, MV was unable to maintain bone mass after stopping iPTH in ovariectomized rats.

PTH(1-34) treatment and/or mechanical loading have different osteogenic effects on the trabecular and cortical bone in the ovariectomized C57BL/6 mouse

In preclinical mouse models, a synergistic anabolic response to PTH(1–34) and tibia loading was shown. Whether combined treatment improves bone properties with oestrogen deficiency, a cardinal feature of osteoporosis, remains unknown. This study quantified the individual and combined longitudinal effects of PTH(1–34) and loading on the bone morphometric and densitometric properties in ovariectomised mice. C57BL/6 mice were ovariectomised at 14-weeks-old and treated either with injections of PTH(1–34); compressive loading of the right tibia; both interventions concurrently; or both interventions on alternating weeks. Right tibiae were microCT-scanned from 14 until 24-weeks-old. Trabecular metaphyseal and cortical midshaft morphometric properties, and bone mineral content (BMC) in 40 different regions of the tibia were measured. Mice treated only with loading showed the highest trabecular bone volume fraction at week 22. Cortical thickness was higher with co-treatment than in the mice treated with PTH alone. In the mid-diaphysis, increases in BMC were significantly higher with loading than PTH. In ovariectomised mice, the osteogenic benefits of co-treatment on the trabecular bone were lower than loading alone. However, combined interventions had increased, albeit regionally-dependent, benefits to cortical bone. Increased benefits were largest in the mid-diaphysis and postero-laterally, regions subjected to higher strains under compressive loads.

Murine Axial Compression Tibial Loading Model to Study Bone Mechanobiology: Implementing the Model and Reporting Results

In vivo, tibial loading in mice is increasingly used to study bone adaptation and mechanotransduction. To achieve standardized and defined experimental conditions, loading parameters and animal-related factors must be considered when performing in vivo loading studies. In this review, we discuss these loading and animal-related experimental conditions, present methods to assess bone adaptation, and suggest reporting guidelines. This review originated from presentations by each of the authors at the workshop "Developing Best Practices for Mouse Models of In Vivo Loading" during the Preclinical Models Section at the Orthopaedic Research Society Annual Meeting, San Diego, CA, March 2017. Following the meeting, the authors engaged in detailed discussions with consideration of relevant literature. The guidelines and recommendations in this review are provided to help researchers perform in vivo loading experiments in mice, and thus further our knowledge of bone adaptation and the mechanisms involved in mechanotransduction. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 38:233-252, 2020.

Impaired geometry, volumetric density, and microstructure of cortical and trabecular bone assessed by HR-pQCT in both sporadic and MEN1-related primary hyperparathyroidism

This study evaluated bone features of PHPT using HR-pQCT. The results showed both cortical and trabecular bones were significantly impaired in PHPT patients. Male and female PHPT patients suffered similar damages in bone. HR-pQCT indices were not observed to differ in MEN1 and sporadic PHPT patients.

INTRODUCTION

High-resolution peripheral quantitative CT is a novel imaging technique used to separately assess trabecular and cortical bone status of the radius and tibia in vivo. Using HR-pQCT, we aimed to evaluate bone features of primary hyperparathyroidism patients in a Chinese population and reveal similarities and differences in bone features in multiple endocrine neoplasia type 1-related PHPT and sporadic PHPT patients in the Chinese population.

METHODS

A case-control study was designed. In 58 PHPT patients and 58 sex- and age-matched healthy controls, the distal radius and tibia were scanned using HR-pQCT. Areal bone mineral density (aBMD) was also determined in PHPT patients using dual-energy X-ray absorptiometry (DXA).

RESULTS

In comparison with controls, PHPT patients were observed to exhibit reduced volumetric BMD at the cortical and trabecular compartments, thinner cortices, and more widely spaced trabeculae. Significant differences were still observed when comparing data of female and male patients with age-matched controls separately. MHPT patients (n = 11) were found to have lower aBMD Z-scores in the lumbar spine, trochanteric region, and total hip compared with sporadic PHPT patients (n = 47), while no differences were observed in HR-pQCT indices between the two groups. In multiple linear regression models, no significant correlations were identified between PTH and HR-pQCT indices. However, height was found to positively correlate with HR-pQCT-derived trabecular indices at both the radius and tibia.

CONCLUSIONS

PHPT affects geometry, volumetric density, and microstructure in both the cortical and trabecular bones in both male and female Chinese patients. MHPT patients were observed to have reduced aBMD as determined by DXA in the lumbar spine and hip in comparison with sporadic PHPT patients. However, HR-pQCT indices were not observed to differ.

Age and Gender Differences of the Frontal Bone: A Computed Tomographic (CT)-Based Study

BACKGROUND

Age-related changes of the frontal bone in both males and females have received limited attention, although understanding these changes is crucial to developing the best surgical and nonsurgical treatment plans for this area.

OBJECTIVES

To investigate age-related and gender-related changes of the forehead.

METHODS

Cranial computed tomographic images from 157 Caucasian individuals were investigated (10 males and 10 females from each of the following decades: 20-29 years, 30-39 years, 40-49 years, 50-59 years, 60-69 years, 70-79 years, 80-89 years, and of 8 males and 9 females aged 90-98 years). Frontal bone thickness and forehead distance measurements were carried out to analyze age and gender differences.

RESULTS

With increasing age, the size of a male forehead reduces until no significant differences to a female forehead is present at old age (P = 0.307). The thickness of the frontal bone of the lower forehead (≤4 cm cranial to the nasal root) increased slightly in both genders with increasing age. In the upper forehead (≥4 cm cranial to the nasal root), frontal bone thickness decreased significantly (P = 0.002) in males but showed no statistically significant change in thickness in females (P = 0.165).

CONCLUSIONS

The shape of the frontal bone varies in young individuals of different genders and undergoes complex changes with age because of bone remodeling. Understanding these bony changes, in addition to those in the soft tissues, helps physicians choose the best surgical and nonsurgical treatment options for the forehead.

LEVEL OF EVIDENCE: 4

Optimized Bioactive Glass: the Quest for the Bony Graft

Technological advances have provided surgeons with a wide range of biomaterials. Yet improvements are still to be made, especially for large bone defect treatment. Biomaterial scaffolds represent a promising alternative to autologous bone grafts but in spite of the numerous studies carried out on this subject, no biomaterial scaffold is yet completely satisfying. Bioactive glass (BAG) presents many qualifying characteristics but they are brittle and their combination with a plastic polymer appears essential to overcome this drawback. Recent advances have allowed the synthesis of organic-inorganic hybrid scaffolds combining the osteogenic properties of BAG and the plastic characteristics of polymers. Such biomaterials can now be obtained at room temperature allowing organic doping of the glass/polymer network for a homogeneous delivery of the doping agent. Despite these new avenues, further studies are required to highlight the biological properties of these materials and particularly their behavior once implanted in vivo. This review focuses on BAG with a particular interest in their combination with polymers to form organic-inorganic hybrids for the design of innovative graft strategies.

Hexane Fraction of Turbo brunneus Inhibits Intermediates of RANK-RANKL Signaling Pathway and Prevent Ovariectomy Induced Bone Loss

Osteoporosis is a "silent disease" characterized by fragile and impaired bone quality. Bone fracture results in increased mortality and poor quality of life in aged people particularly in postmenopausal women. Bone is maintained through the delicate balance between osteoclast-mediated bone resorption and osteoblast-mediated bone formation. The imbalance is caused most often by overly active osteoclasts due to estrogen deficiency. Natural products have long been used to prevent and treat osteoporosis since they have fewer side effects. The marine environment is a potential source of biologically and structurally novel biomolecules with promising biological activities but is less explored for the treatment of bone-related diseases. The present study aims to evaluate the antiosteoporotic effect of Hexane fraction of Turbo brunneus methanolic extract (HxTME) and to investigate its role in RANK-RANKL signaling pathway using in vitro osteoclasts cultures and in vivo ovariectomized (OVX) Swiss mice model. The present study demonstrated that the HxTME significantly inhibited RANKL induced osteoclast differentiation and maturation in vitro. HxTME completely downregulated the mRNA expression of key transcription factors such as NFATc1, c-FOS, and osteoclasts related genes involved in osteoclastogenesis. In vivo studies also depicted the effectiveness of HxTME in ovariectomized mice by preserving bone microarchitecture, mineral content, and inhibiting bone loss in treated mice as analyzed by Histomorphometry, MicroCT, and Raman spectroscopy. Oral administration of HxTME fraction resulted in the decreased percentage of F4/80⁺, CD11b⁺, and CD4⁺ RANKL⁺ T cells in OVX mice whereas pro-osteoclastic cytokine, IL6 was markedly reduced upon treatment with HxTME. On stimulation with PMA/Io and PHA, a significant decrease in proliferative response in the splenocytes of HxTME treated OVX mice was observed. Fatty acid profiling revealed that HxTME is rich in ω3 and ω6 polyunsaturated fatty acids (PUFAs), which have high nutraceutical properties and are known to play important role in growth, development and maintenance of health. Therefore, HxTME may be a good source of nutraceutical in the treatment of bone-related diseases particularly in postmenopausal osteoporosis and may be pursued as a potential candidate for treatment and management of osteoporosis.

Calvarial Volume Loss and Facial Aging: A Computed Tomographic (CT)-Based Study

BACKGROUND

Our understanding of the aging changes involving the cranium and its impact on the overlying soft tissues is limited.

OBJECTIVES

This study was designed to look at the changes that occur in the cranium with aging and to propose an additional mechanism for loss of support for overlying soft tissues.

METHODS

One hundred and fifty-seven white individuals (10 males and 10 females in each decade: 20-29 years, 30-39 years, 40-49 years, 50-59 years, 60-69 years, 70-79 years, 80-89 years, and 8 males and 9 females aged 90-98 years) were investigated. Computed tomographic (CT) multiplanar scans with standardized measurements of cranial thickness were performed for the frontal bone, nasion, vertex, pterion, lambda, calvarial and midfacial height, and sagittal and transverse diameter.

RESULTS

Increasing age correlated with a decrease in sagittal diameter in both males (rp = -0.201) and females (rp = -0.055) but with an increase in transverse diameter in both males (rp = 0.233) and females (rp = 0.207). Frontal bone thickness decreased in males -1.57mm/-18.14%, whereas it increased slightly in females +0.26mm/+3.04%. At the pterion, bone thickness increased significantly in both genders. Calvarial volume decreased with increased age in both males and females: -70.2 ml/-5.35% and -61.4 ml/-5.10%, respectively.

CONCLUSIONS

The lateral expansion of the skull may favor a skeletonized appearance of the face in elderly individuals. The computed volume of the calvaria decreased with advancing age in both genders, providing an additional element in the multifactorial model for facial soft-tissue laxity.

LEVEL OF EVIDENCE 2

Visual Osteoclast Fusion via A Fluorescence Method

Osteoclasts are multinucleated giant cells. Fusion is an essential element in the formation of osteoclasts. However, the exact cellular events and mechanisms remain largely unknown because of limited and insufficient methods for observing fusion process. In this work, a fluorescence reporter strategy was established to monitor osteoclast fusion. After fusing with cells expressing Cre recombinase, those cells with double fluorescence switch its expression from red to green fluorescent protein. The effect of RANKL and PTH on osteoclast fusion were both quantitatively and visually detected utilizing this strategy. Furthermore, a combination of this strategy with a technique of fluorescence-activated cell sorting revealed two different populations of fused osteoclasts, tdTomato+ GFP+ cells (TG cells) and GFP+ cells (G cells). The results argue for the potential of combining this technique with other bio-technologies to gain more information about osteoclast fusion. Overall, these data demonstrated that this visual fluorescence switch strategy is useful for further analysis of osteoclast fusion mechanisms.

Bone remodelling in vitro: Where are we headed?: -A review on the current understanding of physiological bone remodelling and inflammation and the strategies for testing biomaterials in vitro

Bone remodelling is a dynamic process required for the maintenance of bone architecture in response to the changing mechanical needs. It is also a vital process during the repair of bone tissue following injury. Clinical intervention in terms of autografting or allografting is often required to heal bone injuries where physiological healing fails. The use of biomaterials as alternatives to autografts and allografts has spurred a significant research interest into further development of biomaterials for better clinical outcomes. Unfortunately, many biomaterials fail to make it to the clinic or fail after implantation due to the inconsistencies observed between in vitro and in vivo studies. It is therefore important to mimic the in vivo situation as closely as possible in an in vitro setting for testing biomaterials. The current in vitro models focus mostly on investigating the behaviour of osteoblast progenitors with the biomaterial under development as well as assessing the behaviour of osteoclasts, endothelial cells etc. However, the sequence of events that take place during bone healing or remodelling are not incorporated into the current in vitro models. This review highlights our current understanding of the physiological bone remodelling and the bone healing process followed by strategies to incorporate both the physiological and pathophysiological events into an in vitro environment. Here, we propose three strategies for the assessment of biomaterials for bone, which includes; (1) testing biomaterials in the presence of immune cells, (2) testing biomaterials for osteogenesis, and (3) testing biomaterials in the presence of osteoclasts followed by osteoblasts to recapitulate the physiological events of bone resorption prior to bone formation. The focus of this review is to discuss the third strategy in details as the first two strategies are currently incorporated into a majority of in vitro experiments.

Effect of Teriparatide or Risedronate in Elderly Patients With a Recent Pertrochanteric Hip Fracture: Final Results of a 78-Week Randomized Clinical Trial

We present final results of a study comparing teriparatide 20 μg every day (QD) with risedronate 35 mg once per week (QW) started within 2 weeks after surgery for a pertrochanteric hip fracture. Patients with BMD T-score ≤ -2.0 and 25OHD ≥9.2 ng/mL were randomized to receive 26-week double-dummy treatment plus calcium and vitamin D, followed by 52-week open-label treatment with the same assigned active drug. Primary endpoint was change from baseline in lumbar spine (LS) BMD at 78 weeks. Secondary and exploratory endpoints were change in BMD at the proximal femur, function, hip pain (Charnley score and 100 mm Visual Analog Scale [VAS]), quality of life (Short Form-36), radiology outcomes, and safety. Data were analyzed with mixed models for repeated measures (MMRM) and logistic regression. Totally, 224 patients were randomized; 171 (teriparatide: 86) contributed to the efficacy analyses (mean ± SD age: 77 ± 7.7 years, 77% females). Mean baseline LS, femoral neck (FN), and total hip (TH) T-scores were -2.16, -2.63, and -2.51, respectively. At 78 weeks, BMD increased significantly more with teriparatide compared to risedronate at the LS (+11.08% versus +6.45%; p < 0.001) and FN (+1.96% versus -1.19%; p = 0.003), with no significant between-group difference in TH BMD. Timed up-and-go (TUG) test was significantly faster with teriparatide at 6, 12, 18, and 26 weeks (differences: -3.2 to -5.9 s; p = 0.045 for overall difference). Hip pain during TUG test by 100 mm VAS was significantly lower with teriparatide at 18 weeks (adjusted difference: -11.3 mm, p = 0.033; -10.0 and -9.3 mm at 12 and 26 weeks, respectively; p = 0.079 for overall difference). Other secondary and exploratory outcomes were not different. Teriparatide group showed two new hip fractures versus seven with risedronate (p = 0.171) and more frequent hypercalcemia and hyperuricemia. In conclusion, 78-week treatment with teriparatide showed significantly greater increases in LS and FN BMD, less pain, and a faster TUG test versus risedronate. © 2016 American Society for Bone and Mineral Research.

Osteoporosis across chronic liver disease

Osteoporosis is a complication of chronic liver disease, with impact on morbidity, quality of life, and survival. The progress of medicine and the new therapies stretched the disease's natural history and improved the survival of patients with liver disease. So, it is fundamental to make better the quality of life and to prevent complications. Metabolic bone disorders are common complications of chronic liver disease (CLD). Patients with CLD have an increased risk of bone fractures, with significant impact on morbidity, quality of life, and even on survival. Bone diseases, including osteomalacia, osteoporosis, and osteopenia, are frequently observed in many types of liver disease. The pathogenesis of damage and the mechanisms of bone loss are different in relation to the specific liver disease. The relevance of these conditions induced many authors to create a new nosographic entity known as "hepatic osteodystrophy", although this term is rarely used anymore and it is now commonly referred to as osteopenia or osteoporosis associated with chronic liver disease. This review is based on the personal experiences of the authors and upon research done of the available literature on this subject matter. The authors searched the PubMed database for publications containing the term "liver disease" in combination with "bone disease", "hepatic osteodistrophy", "osteoporosis", "osteopenia", "osteomalacia", and "fractures". They selected publications from the past 10 years but did not exclude older seminal publications, especially for colestatic liver diseases. This review of literature shows that osteoporosis crosses all CLD. It is important to underline that the progress of medicine and the new therapies stretched the disease's natural history and improved the survival of patients with CLD. It is fundamental to make better the quality of life and it is mandatory to prevent complications and in particular the osteoporotic ones, especially fractures.

Effect of Concurrent Use of Whole-Body Vibration and Parathyroid Hormone on Bone Structure and Material Properties of Ovariectomized Mice

This study was designed to determine the effectiveness of whole-body vibration (WBV) and intermittent parathyroid hormone (iPTH) in combination against estrogen deficiency-induced osteoporosis. Female C57BL/6J mice were bilaterally ovariectomized (OVX, n = 40) or sham-operated (sham-OVX, n = 8) at 9 weeks of age. Two weeks later, the OVX mice were randomly divided into four groups (n = 10 each): the control group (c-OVX) and groups treated with iPTH (p-OVX), WBV (w-OVX) and both (pw-OVX). The p-OVX and pw-OVX groups were given human PTH (1-34) at a dose of 30 µg/kg/day. The w-OVX and pw-OVX groups were exposed to WBV at an acceleration of 0.3 g and 45 Hz for 20 min/day. All mice were euthanized after the 18-day treatment, and the left tibiae were harvested. The proximal metaphyseal region was µCT-scanned, and its cortical bone cross-section was analyzed by Fourier transform infrared microspectroscopy and nanoindentation testing. A single application of iPTH or WBV to OVX mice had no effect on bone structure or material properties of cortical bone, which were compromised in comparison to those in sham-OVX mice. The combination of iPTH and WBV improved trabecular bone volume, thickness, and connectivity in OVX mice. Although the combined treatment failed to improve cortical bone structure, its mineral maturity and hardness were restored to the levels observed in sham-OVX mice. There was no evidence of interaction between the two treatments, and the combined effects seemed to be additive. These results suggest combining WBV with iPTH has great potential for treating postmenopausal osteoporosis.

Evaluation of Skull Cortical Thickness Changes With Age and Sex From Computed Tomography Scans

Head injuries resulting from motor vehicle crashes (MVC) are extremely common, yet the details of the mechanism of injury remain to be well characterized. Skull deformation is believed to be a contributing factor to some types of traumatic brain injury (TBI). Understanding biomechanical contributors to skull deformation would provide further insight into the mechanism of head injury resulting from blunt trauma. In particular, skull thickness is thought be a very important factor governing deformation of the skull and its propensity for fracture. Previously, age- and sex-based skull cortical thickness changes were difficult to evaluate based on the need for cadaveric skulls. In this cross-sectional study, skull thickness changes with age and sex have been evaluated at homologous locations using a validated cortical density-based algorithm to accurately quantify cortical thickness from 123 high-resolution clinical computed tomography (CT) scans. The flat bones of the skull have a sandwich structure; therefore, skull thickness was evaluated for the inner and outer tables as well the full thickness. General trends indicated an increase in the full skull thickness, mostly attributed to an increase in the thickness of the diploic layer; however, these trends were not found to be statistically significant. There was a significant relationship between cortical thinning and age for both tables of the frontal, occipital, and parietal bones ranging between a 36% and 60% decrease from ages 20 to 100 years in females, whereas males exhibited no significant changes. Understanding how cortical and full skull thickness changes with age from a wide range of subjects can have implications in improving the biofidelity of age- and sex-specific finite element models and therefore aid in the prediction and understanding of TBI from impact and blast injuries.

Individual and combined effects of noise-like whole-body vibration and parathyroid hormone treatment on bone defect repair in ovariectomized mice

The effectiveness of intermittent administration of parathyroid hormone and exposure to whole-body vibration on osteoporotic fracture healing has been previously investigated, but data on their concurrent use are lacking. Thus, we evaluated the effects of intermittent administration of parathyroid hormone, whole-body vibration, and their combination on bone repair in osteoporotic mice. Noise-like whole-body vibration with a broad frequency range was used instead of conventional sine-wave whole-body vibration at a specific frequency. Mice were ovariectomized at 9 weeks of age and subjected to drill-hole surgery in the right tibial diaphysis at 11 weeks. The animals were divided into four groups (n = 12 each): a control group, and groups treated with intermittent administration of parathyroid hormone, noise-like whole-body vibration, and both. From postoperative day 2, the groups treated with intermittent administration of parathyroid hormone and groups treated with both intermittent administration of parathyroid hormone and noise-like whole-body vibration were subcutaneously administered parathyroid hormone at a dose of 30 µg/kg/day. The groups treated with noise-like whole-body vibration and groups treated with both intermittent administration of parathyroid hormone and noise-like whole-body vibration were exposed to noise-like whole-body vibration at a root mean squared acceleration of 0.3g and frequency components of 45–100 Hz for 20 min/day. Following 18 days of interventions, the right tibiae were harvested, and the regenerated bone was analyzed by micro-computed tomography and nanoindentation testing. Compared with the control group, callus volume fraction was 40% higher in groups treated with intermittent administration of parathyroid hormone and 73% higher in groups treated with both intermittent administration of parathyroid hormone and noise-like whole-body vibration, and callus thickness was 35% wider in groups treated with both intermittent administration of parathyroid hormone and noise-like whole-body vibration. Indentation modulus was 46% higher in groups treated with noise-like whole-body vibration and 43% higher in groups treated with both intermittent administration of parathyroid hormone and noise-like whole-body vibration, and hardness was 31% higher in groups treated with both intermittent administration of parathyroid hormone and noise-like whole-body vibration compared with the control group. There was no interaction between the two treatments for both structure and mechanical indexes. The main effects of intermittent administration of parathyroid hormone and noise-like whole-body vibration on bone repair included increased bone formation and enhanced mechanical function of regenerated bone, respectively. The combined treatment resulted in further regeneration of bone with high indentation modulus and hardness, suggesting the therapeutic potential of the combined use of noise-like whole-body vibration and intermittent administration of parathyroid hormone for enhancing osteoporotic bone healing.

Effects of Hypergravity on Osteopontin Expression in Osteoblasts

Mechanical stimuli play crucial roles in bone remodeling and resorption. Osteopontin (OPN), a marker for osteoblasts, is important in cell communication and matrix mineralization, and is known to function during mechanotransduction. Hypergravity is a convenient approach to forge mechanical stimuli on cells. It has positive effects on certain markers of osteoblast maturation, making it a possible strategy for bone tissue engineering. We investigated the effects of hypergravity on OPN expression and cell signaling in osteoblasts. Hypergravity treatment at 20 g for 24 hours upregulated OPN expression in MC3T3-E1 cells at the protein as well as mRNA level. Hypergravity promoted OPN expression by facilitating focal adhesion assembly, strengthening actin bundles, and increasing Runx2 expression. In the hypergravity-triggered OPN expression pathway, focal adhesion assembly-associated FAK phosphorylation was upstream of actin bundle assembly.

Intermittent PTH administration and mechanical loading are anabolic for periprosthetic cancellous bone

The purpose of this study was to determine the individual and combined effects on periprosthetic cancellous bone of intermittent parathyroid hormone administration (iPTH) and mechanical loading at the cellular, molecular, and tissue levels. Porous titanium implants were inserted bilaterally on the cancellous bone of adult rabbits beneath a loading device attached to the distal lateral femur. The left femur received a sham loading device. The right femur was loaded daily, and half of the rabbits received daily PTH. Periprosthetic bone was evaluated up to 28 days for gene expression, histology, and µCT analysis. Loading and iPTH increased bone mass by a combination of two mechanisms: (1) Altering cell populations in a pro-osteoblastic/anti-adipocytic direction, and (2) controlling bone turnover by modulating the RANKL-OPG ratio. At the tissue level, BV/TV increased with both loading (+53%, p < 0.05) and iPTH (+54%, p < 0.05). Combined treatment showed only small additional effects at the cellular and molecular levels that corresponded to a small additive effect on bone volume (+13% compared to iPTH alone, p > 0.05). This study suggests that iPTH and loading are potential therapies for enhancing periprosthetic bone formation. The elucidation of the cellular and molecular response may help further enhance the combined therapy and related targeted treatment strategies.

Strain energy density gradients in bone marrow predict osteoblast and osteoclast activity: a finite element study

Huiskes et al. hypothesized that mechanical strains sensed by osteocytes residing in trabecular bone dictate the magnitude of load-induced bone formation. More recently, the mechanical environment in bone marrow has also been implicated in bone׳s response to mechanical stimulation. In this study, we hypothesize that trabecular load-induced bone formation can be predicted by mechanical signals derived from an integrative µFE model, incorporating a description of both the bone and marrow phase. Using the mouse tail loading model in combination with in vivo micro-computed tomography (µCT) we tracked load induced changes in the sixth caudal vertebrae of C57BL/6 mice to quantify the amount of newly mineralized and eroded bone volumes. To identify the mechanical signals responsible for adaptation, local morphometric changes were compared to micro-finite element (µFE) models of vertebrae prior to loading. The mechanical parameters calculated were strain energy density (SED) on trabeculae at bone forming and resorbing surfaces, SED in the marrow at the boundary between bone forming and resorbing surfaces, along with SED in the trabecular bone and marrow volumes. The gradients of each parameter were also calculated. Simple regression analysis showed mean SED gradients in the trabecular bone matrix to significantly correlate with newly mineralized and eroded bone volumes R(2)=0.57 and 0.41, respectively, p<0.001). Nevertheless, SED gradients in the marrow were shown to be the best predictor of osteoblastic and osteoclastic activity (R(2)=0.83 and 0.60, respectively, p<0.001). These data suggest that the mechanical environment of the bone marrow plays a significant role in determining osteoblast and osteoclast activity.

Using Micro-CT Derived Bone Microarchitecture to Analyze Bone Stiffness - A Case Study on Osteoporosis Rat Bone

Micro-computed tomography (Micro-CT) images can be used to quantitatively represent bone geometry through a range of computed attenuation-based parameters. Nonetheless, those parameters remain indirect indices of bone microarchitectural strength and require further computational tools to interpret bone structural stiffness and potential for mechanical failure. Finite element analysis (FEA) can be applied to measure trabecular bone stiffness and potentially predict the location of structural failure in preclinical animal models of osteoporosis, although that procedure from image segmentation of Micro-CT derived bone geometry to FEA is often challenging and computationally expensive, resulting in failure of the model to build. Notably, the selection of resolution and threshold for bone segmentation are key steps that greatly affect computational complexity and validity. In the following study, we evaluated an approach whereby Micro-CT derived grayscale attenuation and segmentation data guided the selection of trabecular bone for analysis by FEA. We further correlated those FEA results to both two- and three-dimensional bone microarchitecture from sham and ovariectomized (OVX) rats (n = 10/group). A virtual cylinder of vertebral trabecular bone 40% in length from the caudal side was selected for FEA, because Micro-CT based image analysis indicated the largest differences in microarchitecture between the two groups resided there. Bone stiffness was calculated using FEA and statistically correlated with the three-dimensional values of bone volume/tissue volume, bone mineral density, fractal dimension, trabecular separation, and trabecular bone pattern factor. Our method simplified the process for the assessment of trabecular bone stiffness by FEA from Micro-CT images and highlighted the importance of bone microarchitecture in conferring significantly increased bone quality capable of resisting failure due to increased mechanical loading.

Bone adaptation to cyclic loading in murine caudal vertebrae is maintained with age and directly correlated to the local micromechanical environment

The ability of the skeleton to adapt to mechanical stimuli (mechanosensitivity) has most often been investigated at the whole-bone level, but less is known about the local mechanoregulation of bone remodeling at the bone surface, especially in context of the aging skeleton. The aim of this study was to determine the local and global mechanosensitivity of the sixth caudal vertebra during cyclic loading (8 N, three times per week, for six weeks) in mice aged 15, 52, and 82 weeks at the start of loading. Bone adaptation was monitored with in vivo micro-computed tomography. Strain energy density (SED), assumed as the mechanical stimulus for bone adaptation, was determined with micro-finite element models. Mechanical loading had a beneficial effect on the bone microstructure and bone stiffness in all age groups. Mineralizing surface was on average 13% greater (p<0.05) in loaded than control groups in 15- and 82-week-old mice, but not for 52-week-old mice. SED at the start of loading correlated to the change in bone volume fraction in the following 6 weeks for loaded groups (r(2)=0.69-0.85) but not control groups. At the local level, SED was 14-20% greater (p<0.01) at sites of bone formation, and 15-20% lower (p<0.01) at sites of bone resorption compared to quiescent bone surfaces for all age groups, indicating SED was a stimulus for bone adaptation. Taken together, these results support that mechanosensitivity is maintained with age in caudal vertebrae of mice at a local and global level. Since age-related bone loss was not observed in caudal vertebrae, results from the current study might not be translatable to aged humans.

The effects of misalignment during in vivo loading of bone: techniques to detect the proximity of objects in three-dimensional models

Theories of mechanical adaptation of bone suggest that mechanical loading causes bone formation at discrete locations within bone microstructure experiencing the greatest mechanical stress/strain. Experimental testing of such theories requires in vivo loading experiments and high-resolution finite element models to determine the distribution of mechanical stresses. Finite element models of in vivo loading experiments typically assume idealized boundary conditions with applied load perfectly oriented on the bone, however small misalignments in load orientation during an in vivo experiment are unavoidable, and potentially confound the ability of finite element models to predict locations of bone formation at the scale of micrometers. Here we demonstrate two different three-dimensional spatial correlation methods to determine the effects of misalignment in load orientation on the locations of high mechanical stress/strain in the rodent tail loading model. We find that, in cancellous bone, the locations of tissue with high stress are maintained under reasonable misalignments in load orientation (p<0.01). In cortical bone, however, angular misalignments in the dorsal direction can alter the locations of high mechanical stress, but the locations of tissue with high stress are maintained under other misalignments (p<0.01). We conclude that, when using finite element models of the rodent tail loading model, small misalignments in loading orientation do not affect the predicted locations of high mechanical stress within cancellous bone.

Postmenopausal women treated with combination parathyroid hormone (1-84) and ibandronate demonstrate different microstructural changes at the radius vs. tibia: the PTH and Ibandronate Combination Study (PICS)

SUMMARY

In postmenopausal women receiving combination parathyroid hormone (PTH) (1-84) therapy and ibandronate, we evaluated bone microarchitecture and biomechanics using high-resolution peripheral quantitative computed tomography (HR-pQCT). Cortical and trabecular changes were different at the nonweight-bearing radius vs. the weight-bearing tibia, with more favorable overall changes at the tibia.

INTRODUCTION

PTH therapy and bisphosphonates decrease fracture risk in postmenopausal osteoporosis, but their effects on bone microstructure and strength have not been fully characterized, particularly during combination therapy. PTH increases trabecular bone mineral density (BMD) substantially but may decrease cortical BMD, possibly by stimulating intracortical remodeling. We evaluated bone microarchitecture and biomechanics with HR-pQCT at the radius (a nonweight-bearing site) and tibia (weight bearing) in women receiving combination PTH(1-84) and ibandronate.

METHODS

Postmenopausal women with low bone mass (n = 43) were treated with 6 months of PTH(1-84) (100 μg/day), either as one 6- or two 3-month courses, in combination with ibandronate (150 mg/month) over 2 years. HR-pQCT was performed before and after therapy.

RESULTS

Because changes in HR-pQCT parameters did not differ between treatment arms, groups were pooled into one cohort for analysis. Trabecular BMD increased at both radius and tibia (p < 0.01 for each). Cortical thickness and BMD decreased at the radius (p < 0.01), consistent with changes in dual-energy X-ray absorptiometry, while these parameters did not change at the tibia (p ≤ 0.02 for difference between radius and tibia). In contrast, cortical porosity increased at the tibia (p < 0.01) but not radius. Stiffness and failure load decreased at the radius (p < 0.0001) but did not change at the tibia.

CONCLUSIONS

Cortical and trabecular changes in response to the PTH/ibandronate treatment combinations utilized in this study were different at the nonweight-bearing radius vs. the weight-bearing tibia, with more favorable overall changes at the tibia. Our findings support the possibility that weight bearing may optimize the effects of osteoporosis therapy.

The effect of PTH(1-34) on fracture healing during different loading conditions

Parathyroid hormone (PTH) and PTH(1-34) have been shown to promote bone healing in several animal studies. It is known that the mechanical environment is important in fracture healing. Furthermore, PTH and mechanical loading has been suggested to have synergistic effects on intact bone. The aim of the present study was to investigate whether the effect of PTH(1-34) on fracture healing in rats was influenced by reduced mechanical loading. For this purpose, we used female, 25-week-old ovariectomized rats. Animals were subjected to closed midshaft fracture of the right tibia 10 weeks after ovariectomy. Five days before fracture, half of the animals received Botulinum Toxin A injections in the muscles of the fractured leg to induce muscle paralysis (unloaded group), whereas the other half received saline injections (control group). For the following 8 weeks, half of the animals in each group received injections of hPTH(1-34) (20 µg/kg/day) and the other half received vehicle treatment. Fracture healing was assessed by radiology, dual-energy X-ray absorptiometry (DXA), histology, and bone strength analysis. We found that unloading reduced callus area significantly, whereas no effects of PTH(1-34) on callus area were seen in neither normally nor unloaded animals. PTH(1-34) increased callus bone mineral density (BMD) and bone mineral content (BMC) significantly, whereas unloading decreased callus BMD and BMC significantly. PTH(1-34) treatment increased bone volume of the callus in both unloaded and control animals. PTH(1-34) treatment increased ultimate force of the fracture by 63% in both control and unloaded animals and no interaction of the two interventions could be detected. PTH(1-34) was able to stimulate bone formation in normally loaded as well as unloaded intact bone. In conclusion, the study confirms the stimulatory effect of PTH(1-34) on fracture healing, and our data suggest that PTH(1-34) is able to promote fracture healing, as well as intact bone formation during conditions of reduced mechanical loading.

Constitutive protein kinase A activity in osteocytes and late osteoblasts produces an anabolic effect on bone

Osteocytes have been implicated in the control of bone formation. However, the signal transduction pathways that regulate the biological function of osteocytes are poorly defined. Limited evidence suggests an important role for the Gs/cAMP pathway in osteocyte function. In the present study, we explored the hypothesis that cAMP-dependent kinase A (PKA) activation in osteocytes plays a key role in controlling skeletal homeostasis. To test this hypothesis, we mated mice harboring a Cre-conditional, mutated PKA catalytic subunit allele that encodes a constitutively active form of PKA (CαR) with mice expressing Cre under the control of the osteocyte-specific promoter, DMP1. This allowed us to direct the expression of CαR to osteocytes in double transgenic progeny. Examination of Cre expression indicated that CαR was also expressed in late osteoblasts. Cortical and trabecular bone parameters from 12-week old mice were determined by μCT. Expression of CαR in osteocytes and late osteoblasts altered the shape of cortical bone proximal to the tibia-fibular junction (TFJ) and produced a significant increase in its size. In trabecular bone of the distal femur, fractional bone volume, trabecular number, and trabecular thickness were increased. These increases were partially the results of increased bone formation rates (BFRs) on the endosteal surface of the cortical bone proximal to the TFJ as well as increased BFR on the trabecular bone surface of the distal femur. Mice expressing CαR displayed a marked increase in the expression of osteoblast markers such as osterix, runx2, collagen 1α1, and alkaline phosphatase (ALP). Interestingly, expression of osteocyte marker gene, DMP1, was significantly up-regulated but the osteocyte number per bone area was not altered. Expression of SOST, a presumed target for PKA signaling in osteocytes, was significantly down-regulated in females. Importantly, no changes in bone resorption were detected. In summary, constitutive PKA signaling in osteocytes and late osteoblasts led to a small expansion of the size of the cortical bone proximal to the TFJ and an increase in trabecular bone in female mice. This was associated with down-regulation of SOST and up-regulation of several osteoblast marker genes. Activation of the PKA pathway in osteocytes and late osteoblasts is sufficient for the initiation of an anabolic skeletal response.

Local mechanical stimuli regulate bone formation and resorption in mice at the tissue level

Bone is able to react to changing mechanical demands by adapting its internal microstructure through bone forming and resorbing cells. This process is called bone modeling and remodeling. It is evident that changes in mechanical demands at the organ level must be interpreted at the tissue level where bone (re)modeling takes place. Although assumed for a long time, the relationship between the locations of bone formation and resorption and the local mechanical environment is still under debate. The lack of suitable imaging modalities for measuring bone formation and resorption in vivo has made it difficult to assess the mechanoregulation of bone three-dimensionally by experiment. Using in vivo micro-computed tomography and high resolution finite element analysis in living mice, we show that bone formation most likely occurs at sites of high local mechanical strain (p<0.0001) and resorption at sites of low local mechanical strain (p<0.0001). Furthermore, the probability of bone resorption decreases exponentially with increasing mechanical stimulus (R² = 0.99) whereas the probability of bone formation follows an exponential growth function to a maximum value (R² = 0.99). Moreover, resorption is more strictly controlled than formation in loaded animals, and ovariectomy increases the amount of non-targeted resorption. Our experimental assessment of mechanoregulation at the tissue level does not show any evidence of a lazy zone and suggests that around 80% of all (re)modeling can be linked to the mechanical micro-environment. These findings disclose how mechanical stimuli at the tissue level contribute to the regulation of bone adaptation at the organ level.

The effects of PTH, loading and surgical insult on cancellous bone at the bone-implant interface in the rabbit

Enhancing the quantity and quality of cancellous bone with anabolic pharmacologic agents may lead to more successful outcomes of non-cemented joint replacements. Using a novel rabbit model of cancellous bone loading, we examined two specific questions regarding bone formation at the bone-implant interface: (1) does the administration of intermittent PTH, a potent anabolic agent, and mechanical loading individually and combined enhance the peri-implant cancellous bone volume fraction; and, (2) does surgical trauma enhance the anabolic effect of PTH on peri-implant bone volume fraction. In this model, PTH enhanced peri-implant bone volume fraction by 30% in loaded bone, while mechanical loading alone increased bone volume fraction modestly (+10%). Combined mechanical loading and PTH treatment had no synergistic effect on any cancellous parameters. However, a strong combined effect was found in bone volume fraction with combined surgery and PTH treatment (+34%) compared to intact control limbs. Adaptive changes in the cancellous bone tissue included increased ultimate stress and enhanced remodeling activity. The number of proliferative osteoblasts increased as did their expression of pro-collagen 1 and PTH receptor 1, and the number of TRAP positive osteoclasts also increased. In summary, both loading and intermittent PTH treatment enhanced peri-implant bone volume, and surgery and PTH treatment had a strong combined effect. This finding is of clinical importance since enhancing early osseointegration in the post-surgical period has numerous potential benefits.

New laboratory tools in the assessment of bone quality

Bone quality is a complex set of intricated and interdependent factors that influence bone strength. A number of methods have emerged to measure bone quality, taking into account the organic or the mineral phase of the bone matrix, in the laboratory. Bone quality is a complex set of different factors that are interdependent. The bone matrix organization can be described at five different levels of anatomical organization: nature (organic and mineral), texture (woven or lamellar), structure (osteons in the cortices and arch-like packets in trabecular bone), microarchitecture, and macroarchitecture. Any change in one of these levels can alter bone quality. An altered bone remodeling can affect bone quality by influencing one or more of these factors. We have reviewed here the main methods that can be used in the laboratory to explore bone quality on bone samples. Bone remodeling can be evaluated by histomorphometry; microarchitecture is explored in 2D on histological sections and in 3D by microCT or synchrotron. Microradiography and scanning electron microscopy in the backscattered electron mode can measure the mineral distribution; Raman and Fourier-transformed infra-red spectroscopy and imaging can simultaneously explore the organic and mineral phase of the matrix on multispectral images; scanning acoustic microscopy and nanoindentation provide biomechanical information on individual trabeculae. Finally, some histological methods (polarization, surface staining, fluorescence, osteocyte staining) may also be of interest in the understanding of quality as a component of bone fragility. A growing number of laboratory techniques are now available. Some of them have been described many years ago and can find a new youth; others having benefited from improvements in physical and computer techniques are now available.

[Senile osteoporosis: an update]

Knowledge of the mechanisms underlying the development of osteoporosis in the elderly has advanced greatly in the past few years. After an initial sudden loss of bone mineral mass in the peri-menopausal period there follows a more progressive and gradual loss that has also been seen in men. This initial drop in bone mass is due to a significant increase in bone resorption. There is also a significant reduction in bone formation with age that is mainly due to osteoblastogenesis in the bone marrow passing to a second plane, transferring its main role to adipogenesis. In this article, the latest evidence on the pathophysiology of senile osteoporosis is reviewed, highlighting the mechanisms of action of available treatments. Potential future treatments are also considered, which include new therapeutic approaches based on the pathophysiology of osteoporosis in the elderly, mainly on the potential reversibility of the adipogenesis.

Comparative effects of teriparatide and strontium ranelate in the periosteum of iliac crest biopsies in postmenopausal women with osteoporosis

The periosteum contains osteogenic cells that regulate the outer shape of bone and contribute to determine its cortical thickness, size and position. We assessed the effects of subcutaneous injections of teriparatide (TPTD, 20μg/day) or oral strontium ranelate (SrR, 2g/day) in postmenopausal women with osteoporosis on new bone formation activity at the periosteal and endosteal bone surfaces using dynamic histomorphometric measurements. Evaluable tetracycline-labeled transiliac crest bone biopsies were analyzed from 27 patients in the TPTD group, and 22 in the SrR group after six months of treatment. Measurements were conducted on the thicker and thinner cortices separately, and comparisons between the thicker, thinner and combined cortices were carried out. At the combined periosteal cortex, the mineralization surface as a percent of bone surface (MS/BS%) was greater for TPTD (mean±SE: 8.08±1.22%) than SrR (3.22±1.05%) (p<0.005). The difference in mineral apposition rate (MAR) between TPTD (0.35±0.06μm/day) and SrR (0.14±0.06μm/day) was also significant (p<0.05), while that of bone formation rate per bone surface (BFR/BS) between TPTD (0.014±0.004 mm(3)/mm(2)/year) and SrR (0.004±0.003 mm(3)/mm(2)/year) was not (p=0.057). Statistically significant differences between the two treatments were also observed for MS/BS%, BFR/BS, MAR and the double-labeled perimeter in the periosteum of the thicker, but not thinner, iliac crest cortices. The comparison between the thicker and thinner cortices of both periosteal and endosteal surfaces showed statistically significant differences for MAR and the double-labeled perimeter for TPTD treated women. There were no statistically significant differences in any bone formation dynamic measurements between the two cortices in the SrR group. In conclusion, most of the bone formation and mineralization variables were significantly higher for TPTD- than SrR-treated women at both the periosteal and endosteal combined cortices. The response to TPTD for dynamic bone formation measurements in the periosteal surface was greater for the thicker than thinner cortex, but this difference was not significant in SrR treated patients. This may reflect a greater ability of TPTD to enhance responsiveness of bone to the mechanical loading environment. These effects on bone formation may underlie the improvement in bone quality in patients with osteoporosis treated with TPTD.

Experimental and finite element analysis of the mouse caudal vertebrae loading model: prediction of cortical and trabecular bone adaptation

In this study, we attempt to predict cortical and trabecular bone adaptation in the mouse caudal vertebrae loading model using knowledge of bone's local mechanical environment at the onset of loading. In a previous study, we demonstrated appreciable 25.9 and 11% increases in both trabecular and cortical bone volume density, respectively, when subjecting the fifth caudal vertebrae (C5) of C57BL/6 (B6) mice to an acute loading regime (amplitude of 8N, 3000 cycles, 10 Hz, 3 times a week for 4 weeks). We have also established a validated finite element (FE) model of the C5 vertebra using micro-computed tomography (micro-CT), which characterizes, in 3D, the micro-mechanical strains present in both cortical and trabecular compartments due to the applied loads. To investigate the relationship between load-induced bone adaptation and mechanical strains in-vivo and in-silico data sets were compared. Using data from the previous cross-sectional study, we divided cortical and trabecular compartments into 15 subregions and determined, for each region, a bone formation parameter ΔBV/BS (a cross-sectional measure of the bone volume added to cortical and trabecular surfaces following the described loading regime). Linear regression was then used to correlate mean regional values of ΔBV/BS with mean values of mechanical strains derived from the FE models which were similarly regionalized. The mechanical parameters investigated were strain energy density (SED), the orthogonal strains (e (x), e (y), e (z)) and the three shear strains (e (xy), e (yz), e (zx)). For cortical regions, regression analysis showed SED to correlate extremely well with ΔBV/BS (R (2) = 0.82) and e (z) (R (2) = 0.89). Furthermore, SED was found to predict expansion of the cortical shell correlating significantly with the regional percentage increases in cortical tissue volume (R (2) = 0.92), cortical marrow volume (R (2) = 0.91) and cortical thickness (R (2) = 0.56). For trabecular regions, FE parameters were found not to correlate with load-induced trabecular bone morphology. These results indicate that load-induced cortical morphology can be predicted from population data, whereas the prediction of trabecular morphology requires subject-specific micro- architecture.

Low-magnitude whole-body vibration does not enhance the anabolic skeletal effects of intermittent PTH in adult mice

Whole-body vibration (WBV) is a low-magnitude mechanical stimulus that may be anabolic for bone, yet we recently found that WBV did not improve bone properties in adult mice. Because intermittent parathyroid hormone (PTH) enhances the anabolic effects of high-magnitude skeletal loading, we sought to determine the skeletal effects of WBV in combination with PTH. Seven-month-old male BALB/c mice were assigned to six groups (n = 13-14/group) based on magnitude of applied acceleration (0 or 0.3 G) and PTH dose (0, 10, or 40 µg/kg/day). Mice were exposed to WBV (0.3 G, 90 Hz, sine wave) or sham loading (0 G) for 15 min/day, 5 days/week for 8 weeks. Vehicle or hPTH (1-34) was administered prior to each WBV session. Whole-body bone mineral content increased by ~ 5% from 0 to 8 weeks in the 40 µg/kg PTH group only, independent of WBV loading. Similarly, PTH treatment increased tibial cortical bone volume by ~5% from 0 to 8 weeks, independent of WBV loading. Neither PTH nor WBV stimulated trabecular bone formation. Consistent with the cortical bone effect, tibias from the 40 µg/kg PTH group had significantly greater ultimate force and energy to failure than tibias in the 0 and 10 µg/kg PTH groups, independent of WBV treatment. In summary, 8 weeks of intermittent PTH treatment increased cortical bone volume and strength in adult male BALB/c mice. Daily exposure to low-magnitude WBV by itself did not improve skeletal properties and did not enhance the PTH effect. No WBV-PTH synergy was found in this preclinical study.

Loading and skeletal development and maintenance

Mechanical loading is a major regulator of bone mass and geometry. The osteocytes network is considered the main sensor of loads, through the shear stress generated by strain induced fluid flow in the lacuno-canalicular system. Intracellular transduction implies several kinases and phosphorylation of the estrogen receptor. Several extra-cellular mediators, among which NO and prostaglandins are transducing the signal to the effector cells. Disuse results in osteocytes apoptosis and rapid imbalanced bone resorption, leading to severe osteoporosis. Exercising during growth increases peak bone mass, and could be beneficial with regards to osteoporosis later in life, but the gain could be lost if training is abandoned. Exercise programs in adults and seniors have barely significant effects on bone mass and geometry at least at short term. There are few data on a possible additive effect of exercise and drugs in osteoporosis treatment, but disuse could decrease drugs action. Exercise programs proposed for bone health are tedious and compliance is usually low. The most practical advice for patients is to walk a minimum of 30 to 60 minutes per day. Other exercises like swimming or cycling have less effect on bone, but could reduce fracture risk indirectly by maintaining muscle mass and force.

The Load-Bearing Mechanosome Revisited

We introduced the mechanosome hypothesis in 2003 as a heuristic model for investigating mechanotransduction in bone (Pavalko et al., J Cell Biochem, 2003, 88(1):104-112). This model suggested specific approaches for investigating how mechanical information is conveyed from the membrane of the sensor bone cell to the target genes and how this transmitted information from the membrane is converted into changes in transcription. The key concepts underlying the mechanosome hypothesis are that load-induced deformation of bone deforms the sensor cell membrane; embedded in the membrane are the focal adhesion and cadherin-catenin complexes, which in turn are physically connected to the chromatin via a solid-state scaffold. The physical stimulation of the membrane launches multiprotein complexes (mechanosomes) from the adhesion platforms while concomitantly tugging target genes into position for contact with the incoming mechanosomes, the carriers of the mechanical information to the nucleus. The mechanosome is comprised of an adhesion-associated protein and a nucleocytoplasmic shuttling transcription factor. Upon arrival at the target gene, mechanosomes alter DNA conformation and thus influence the interactions between trans-acting proteins along the gene, changing gene activity. Here, we update significant progress related to the mechanosome concept since publication of our original hypothesis. The launching of adhesion- and cytoskeletal-associated proteins into the nucleus toward target genes appears to be a common mechanism for regulating cell response to changes in its mechanical microenvironment.