Three-dimensional optical bit-memory recording and reading with a photorefractive crystal: analysis and experiment

Arbitrary-lattice photonic crystals created by multiphoton microfabrication

We used voxels of an intensely modified refractive index generated by multiphoton absorption at the focus of femtosecond laser pulses in Ge-doped silica as photonic atoms to build photonic lattices. The voxels were spatially organized in the same way as atoms arrayed in actual crystals, and a Bragg-like diffraction from the photonic atoms was evidenced by a photonic bandgap (PBG) effect. Postfabrication annealing was found to be essential for reducing random scattering and therefore enhancing PBG. This technique has an intrinsic capability of individually addressing single atoms. Therefore the introduction of defect structures was much facilitated, making the technique quite appealing for photonic research and applications.

Three-dimensional optical data storage in a fluorescent dye-doped photopolymer

We propose a new, to our knowledge, monolithic multilayer optical storage medium in which data may be stored through the diffusional redistribution of fluorescent molecules within a polymer host. The active portion of the medium consists of a photopolymer doped with a fluorescent dye that is polymerized at the focal point of a high-numerical-aperture lens. We believe that as fluorescent molecules bond to the polymer matrix they become more highly concentrated in the polymerized regions, resulting in the modulated data pattern. Since data readout is based on detection of fluorescence rather than index modulation as in other photopolymer-based memories, the problems of media shrinkage and optical scatter are of less concern. An intensity threshold observed in the recording response of this material due to the presence of inhibitor molecules in the photopolymer allows for the three-dimensional confinement of recorded bits and therefore multilayer recording. The nonlinear recording characteristics of this material were investigated through a simple model of photopolymerization and diffusion and verified experimentally. Both single-layer and multilayer recordings were demonstrated.

Reflection confocal microscope readout system for three-dimensional photochromic optical data storage

We propose to use a reflection confocal microscope (RCM) as a readout system for digital data stored in a three-dimensional (3D) photochromic optical memory. We describe the merits and the difficulties for 3D optical memory that are associated with the use of such a RCM.It is shown by means of 3D Fourier space analysis that successful reading of 3D data can be obtained by selection of the appropriate parameter for the RCM.The system parameters include the numerical aperture of the objective lens and the wavelength of the light used for analysis (reading). Experimental results of multilayer recording and reflection confocal reading in photochromic-molecule-doped poly(methyl methacrylate) are presented. Good-contrast images are obtained.

Effects of refractive-index mismatch on three-dimensional optical data-storage density in a two-photon bleaching polymer

Reported is an investigation into the effect of spherical aberration caused by the mismatch of the refractive indices between the recording material and its immersion medium on the three-dimensional optical data-storage density in a two-photon bleaching polymer. It is found both theoretically and experimentally that spherical aberration can be compensated for by a change in the tube length at which a microscope objective is operated in recording and reading processes. After compensation for the spherical aberration it is possible to achieve a three-dimensional recording density of 3.5 Tbits/cm(3) for a commercial objective with a numerical aperture of 1.4.

Use of two-photon absorption in a photorefractive crystal for three-dimensional optical memory

We describe the use of two-photon absorption in a photorefractive crystal for recording bit data in multilayered optical memory. A short-pulse near-infrared laser is used for generating the photorefractive effect by two-photon absorption. We succeeded in recording and reading seven layers of data in a LiNbO(3) crystal with a lateral resolution (distance between bits) of 5microm and an axial resolution (distance between layers) of 20 microm .

Nondestructive readout of a three-dimensional photochromic optical memory with a near-infrared differential phase-contrast microscope

A three-dimensional (3D) rewritable optical memory using photochromic material is described for high-density memory. The bits are recorded in a 3D volume of photochromic material. A transformation of the photochromic molecule between two isomers with different absorption spectra can be stimulated by irradiation with appropriate wavelengths. We show that a nondestructive readout of photochromic memory is possible by use of a small difference in the refractive index of the photochromic isomers in the near-IR range. For this purpose a near-IR laser-scan differential phase-contrast microscope is used. Experimental results of 3D recording and nondestructive reading are presented.

Three-dimensional optical storage inside transparent materials

We present a novel method for three-dimensional optical data storage that has submicrometer size resolution, provides a large contrast in index of refraction, and is applicable to a wide range of transparent materials. Bits are recorded by use of a 0.65-N.A. objective to focus 100-fs laser pulses inside the material. The laser pulse produces a submicrometer-diameter structurally altered region with high contrast in index of refraction. We record binary information by writing such bits in multiple planes and read it out with a microscope objective with a short depth of field. We demonstrate data storage and retrieval with 2-microm in-plane bit spacing and 15-microm interplane spacing (17 Gbits/cm(3)). Scanning electron microscopy and atomic force microscopy show structural changes confined to an area 200 nm in diameter.

Randomly accessible, multilayered optical memory with a Bi(12)SiO(20) crystal

A read-and-write, randomly accessible, multilayered optical memory with a Bi(12) SiO(20) crystal as the medium is demonstrated. Data are recorded in the crystal as an absorption change that is due to the photochromic effect. These data are successfully recorded, read, and selectively erased in five layers in the crystal. The axial-separation distance between neighboring layers is 30 μm, and the lateral distance between bits is 5 μm. Selective bit erasure of the data is accomplished by illumination of the recorded bit datum with He-Ne laser light. To our knowledge, this is the first successful demonstration of the selective optical erasure of the photochromic effect in a BSO crystal.

Differential phase-contrast microscope with a split detector for the readout system of a multilayered optical memory

A transmission differential phase-contrast microscope with a split detector is used as a readout system for a multilayered three-dimensional optical memory. The system is applicable to data recorded as refractive-index changes. The system is compact and easy to use. The three-dimensional optical transfer function for the system is derived. This shows that the spatial bandwidth of the system is the same as that of a conventional microscope with incoherent illumination but with much improved contrast. Six layers of information are recorded in a photopolymer and are read out with little cross talk and high contrast.