Photorefractive optical lock-in vibration spectral measurement

Imaging of transient surface acoustic waves by full-field photorefractive interferometry

A stroboscopic full-field imaging technique based on photorefractive interferometry for the visualization of rapidly changing surface displacement fields by using of a standard charge-coupled device (CCD) camera is presented. The photorefractive buildup of the space charge field during and after probe laser pulses is simulated numerically. The resulting anisotropic diffraction upon the refractive index grating and the interference between the polarization-rotated diffracted reference beam and the transmitted signal beam are modeled theoretically. The method is experimentally demonstrated by full-field imaging of the propagation of photoacoustically generated surface acoustic waves with a temporal resolution of nanoseconds. The surface acoustic wave propagation in a 23 mm × 17 mm area on an aluminum plate was visualized with 520 × 696 pixels of the CCD sensor, yielding a spatial resolution of 33 μm. The short pulse duration (8 ns) of the probe laser yields the capability of imaging SAWs with frequencies up to 60 MHz.

Multiplexed optical operation of distributed nanoelectromechanical systems arrays

We report a versatile all optical technique to excite and read-out a distributed nanoelectromechanical systems (NEMS) array. The NEMS array is driven by a distributed, intensity modulated optical pump through the photothermal effect. The ensuing vibrational response of the array is multiplexed onto a single probe beam in the form of a high frequency phase modulation. The phase modulation is optically down converted to a low frequency intensity modulation using an adaptive full-field interferometer, and subsequently detected using a CCD array. Rapid and single step mechanical characterization of ∼44 nominally identical high-frequency resonators is demonstrated. The technique may enable sensitivity improvements over single NEMS resonators by averaging signals coming from a multitude of devices in the array. In addition, the diffraction limited spatial resolution may allow for position-dependent read-out of NEMS sensor chips for sensing multiple analytes or spatially inhomogeneous forces.

Imaging anisotropic elastic properties of an orthotropic paper sheet using photorefractive dynamic holography

An important material property in the paper industry is the anisotropic stiffness distribution due to the fibrous microstructure of paper and to processing procedures. Ultrasonic methods offer a means of determining the stiffness of sheets of paper from the anisotropic propagation characteristics of elastic Lamb waves along the machine direction and the cross direction. That is, along and perpendicular to the direction of paper production. Currently, piezoelectric ultrasonic methods are employed in the industry to measure the elastic polar diagram of paper through multiple contacting measurements made in all directions. This paper describes a new approach utilizing the INEEL Laser Ultrasonic Camera to provide a complete image of the elastic waves traveling in all directions in the plane of the paper sheet. This approach is based on optical dynamic holographic methods that record the out of plane ultrasonic motion over the entire paper surface simultaneously without scanning. The full-field imaging technique offers great potential for increasing the speed of the measurement and it ultimately provides a substantial amount of information concerning local property variations and flaws in the paper. This report shows the success of the method and the manner in which it yields the elastic polar diagram for the paper from the dispersive flexural or antisymmetric Lamb wave.

Real-time, frequency-translated holographic visualization of surface acoustic wave interactions with surface-breaking defects

A real-time, frequency-translated holographic imaging system has been developed by use of bacteriorhodopsin film. The system provides a capability for imaging surface acoustic waves and has been utilized to detect and characterize surface-breaking defects through near-field ultrasonic scattering effects. Frequency-plane filtering was used to discriminate between ultrasonic standing-wave and near-field scattering features, dramatically enhancing the holographic visualization of the defect sites. A detailed description of the system is presented, along with representative holographic images showing the interaction of surface acoustic waves with surface-breaking cracks and small notches in aluminum and titanium substrates.

Off-axis propagation of ultrasonic guided waves in thin orthotropic layers: theoretical analysis and dynamic holographic imaging measurement

The elastic properties of many materials in sheet or plate form can be approximated with orthotropic symmetry. In many sheet material manufacturing industries (e.g., the paper industry), manufacturers desire knowledge of certain anisotropic elastic properties in the sheet for handling and quality issues. Ultrasonic wave propagation in plate materials forms a method to determine the anisotropic elastic properties in a nondestructive manner. This work explores exact and approximate analysis methods of ultrasonic guided wave propagation in thin layers, explicitly dealing with orthotropic symmetry and propagation off-axis with respect to the manufacturing direction. Recent advances in full-field ultrasonic imaging methods, based on dynamic holography, allow simultaneous measurement of the plate wave motion in all planar directions within a single image. Results from this laser ultrasonic imaging approach are presented that record the lowest anti-symmetric (flexural) mode wavefront in a single image without scanning. Specific numerical predictions for flexural wave propagation in two distinctly different types of paper are presented and compared with direct imaging measurements. Very good agreement is obtained for the lowest anti-symmetric plate mode using paper properties independently determined by a third party. Complete determination of the elastic modulus tensor for orthotropic layers requires measurement of other modes in addition to the lowest anti-symmetric. Theoretical predictions are presented for other guided wave modes [extensional (S), flexural (A), and shear-horizontal (SH)] in orthotropic plates with emphasis on propagation in all planar directions. It is shown that there are significant changes in the dispersion characterization of these modes at certain frequencies (including off-axis mode coupling) that can be exploited to measure additional in-plane elastic moduli of thin layers. At present, the sensitivity of the imaging measurement approach limits experimental investigation to relatively large amplitudes easily produced by flexural wave motion (> 0.1 nm). Extension of the measurement range and application to other plate wave modes are in progress and shall be reported in future work.

Speckle velocimetry by means of holographic time-integrative correlation

We develop the theory of the speckle velocimeter that is based on use of a photorefractive real-time hologram in four-wave mixing as a time-integrative correlator. The theory of the speckle velocimeter has been developed for the time correlation between the far-field spectrum of light scattered from the diffuser and the reference wave that is Doppler shifted. Our theoretical derivation shows that it is possible to extract the velocity with minor processing of the output correlation.

Static and dynamic two-wave mixing in GaAs

We studied the two-wave mixing anisotropic diffraction process in GaAs for demodulation of static and dynamic phase encoded signals. The static results quantitatively agreed with a previous theoretical model for cubic crystals. This model has been described explicitly for all beam polarizations and crystal rotation angles with respect to the plane of incidence. Dynamic phase modulation, in which the signal beam was phase modulated at frequency f(s) and the reference beam at f(r) = f(s) + Deltaf, produced a signal at Deltaf that was proportional to the difference between the static beam intensities with and without two-wave mixing under all conditions of polarization and crystal orientation studied. A significant dynamic output signal was produced even when only a shift in polarization but no energy transfer occurred as a result of the anisotropic two-wave mixing process. Therefore not only is the two-wave mixing gain important when the photorefractive effect is used for dynamic phase demodulation, but so are the polarization shifts occurring from the mixing process.