Extended field-of-view adaptive optics in microscopy via numerical field segmentation

Aberration free synthetic aperture second harmonic generation holography

Second harmonic generation (SHG) microscopy is a valuable tool for optical microscopy. SHG microscopy is normally performed as a point scanning imaging method, which lacks phase information and is limited in spatial resolution by the spatial frequency support of the illumination optics. In addition, aberrations in the illumination are difficult to remove. We propose and demonstrate SHG holographic synthetic aperture holographic imaging in both the forward (transmission) and backward (epi) imaging geometries. By taking a set of holograms with varying incident angle plane wave illumination, the spatial frequency support is increased and the input and output pupil phase aberrations are estimated and corrected - producing diffraction limited SHG imaging that combines the spatial frequency support of the input and output optics. The phase correction algorithm is computationally efficient and robust and can be applied to any set of measured field imaging data.

Analysis of assembly tolerance compensation in microscope objectives with a free-form element at the aperture stop

We analyze the feasibility of using refractive free-form phase plates at the aperture stop of microscope objectives as an alternative to active alignment to compensate for assembly tolerances. The method involves the determination of misalignment-induced aberrations at the exit pupil, and transferring them to the aperture stop while taking pupil aberrations into consideration. We demonstrate that despite being able to correct only for field-independent aberrations, this method can restore near-diffraction-limited imaging performance of passively aligned systems with practical tolerances, given that the as-designed system is highly corrected. We confirm the results via numerical simulations for two different commercial objective designs.

Aberration measurement and correction on a large field of view in fluorescence microscopy

The aberrations induced by the sample and/or by the sample holder limit the resolution of optical microscopes. Wavefront correction can be achieved using a deformable mirror with wavefront sensorless optimization algorithms but, despite the complexity of these systems, the level of correction is often limited to a small area in the field of view of the microscope. In this work, we present a plug and play module for aberration measurement and correction. The wavefront correction is performed through direct wavefront reconstruction using the spinning-pupil aberration measurement and controlling a deformable lens in closed loop. The lens corrects the aberrations in the center of the field of view, leaving residual aberrations at the margins, that are removed by anisoplanatic deconvolution. We present experimental results obtained in fluorescence microscopy, with a wide field and a light sheet fluorescence microscope. These results indicate that detection and correction over the full field of view can be achieved with a compact transmissive module placed in the detection path of the fluorescence microscope.

Experimental determination of shift-less aberration bases for sensorless adaptive optics in nonlinear microscopy

Adaptive optics can improve the performance of optical systems and devices by correcting phase aberrations. While in most applications wavefront sensing is employed to drive the adaptive optics correction, some microscopy methods may require sensorless optimization of the wavefront. In these cases, the correction is performed by describing the aberration as a linear combination of a base of influence functions, optimizing an image quality metric as a function of the coefficients. The influence functions base is generally chosen to either efficiently represent the adaptive device used or to describe generic wavefronts in an orthogonal fashion. A rarely discussed problem is that most correction bases have elements which introduce, together with a correction of the aberration, a shift of the imaging field of view in three dimensions. While simple methods to solve the problem are available for linear microscopy methods, nonlinear microscopy techniques such as multiphoton or second harmonic generation microscopy require non-trivial base determination. In this paper, we discuss the problem, and we present a method for calibrating a shift-less base on a spatial light modulator for two-photon microscopy.

Electrically tunable lenses - eliminating mechanical axial movements during high-speed 3D live imaging

The successful investigation of photosensitive and dynamic biological events, such as those in a proliferating tissue or a dividing cell, requires non-intervening high-speed imaging techniques. Electrically tunable lenses (ETLs) are liquid lenses possessing shape-changing capabilities that enable rapid axial shifts of the focal plane, in turn achieving acquisition speeds within the millisecond regime. These human-eye-inspired liquid lenses can enable fast focusing and have been applied in a variety of cell biology studies. Here, we review the history, opportunities and challenges underpinning the use of cost-effective high-speed ETLs. Although other, more expensive solutions for three-dimensional imaging in the millisecond regime are available, ETLs continue to be a powerful, yet inexpensive, contender for live-cell microscopy.

Tunable fluidic lens with a dynamic high-order aberration control

Fluidic lenses based on electrowetting actuation are attractive for their wide focal tuning range, yet are limited by optical aberrations, either intrinsic to the lenses themselves or due to the optical imaging systems in which they are employed. However, the ability to control the meniscus shape that forms the lens refractive surface with a high degree of spatial accuracy will allow correction of and compensation for a wide range of these aberrations. We demonstrate here for what we believe, to the best of our knowledge, is the first time a tunable optofluidic lens controlled by 32 azimuthally placed electrodes for which most aberrations up to the fourth radial Zernike order may be corrected. Using both wavefront sensing and sensorless wavefront estimation techniques, it is shown that focal length tunability with a significant reduction in imaging aberrations and the ability to compensate for externally induced aberrations may be achieved using a single component.

Plug-and-play adaptive optics for commercial laser scanning fluorescence microscopes based on an adaptive lens

In this Letter, we present a solution for simple implementation of adaptive optics in any existing laser scanning fluorescence microscope. Adaptive optics are implemented by the introduction of a multiactuator adaptive lens between the microscope body and the objective lens. Correction is performed with a sensorless method by optimizing the quality of the images presented on screen by the microscope software. We present the results acquired on both a commercial linear excitation confocal microscope and a custom-made multiphoton excitation microscope.