Optical configuration and color-representation range of a variable-pitch dot matrix holographic printer

Large area structural color printing based on dot-matrix laser interference patterning

Optically Variable Devices (OVDs) are widely used as security features in anti-counterfeiting efforts. OVDs enable the display of color dynamic effects that are easily interpreted by the user. However, obtaining these elements over large areas poses certain challenges in terms of efficiency. The paper presents a modified approach for manufacturing plasmonic type OVDs through dot-matrix technology, which is a standard origination step of security holograms. By adjusting the spatial filters in the optical scheme, it is possible to double the resolution of the recorded quasi-sinusoidal diffraction gratings. The experiments confirm the creation of diffraction gratings with frequencies from 1600 to 3500 lines per mm, which facilitates the production of plasmonic zero-order spectral filters. The paper shows how the transmission characteristics of the studied elements are affected by the geometric parameters of the diffraction grating, silver layer thickness, angle of incidence, and polarization of light. The results have shown that using the proposed method it is possible to obtain 1D or 2D structural color OVD-image on a large area - several square centimeters and more. High speed recording of such elements is provided: the exposure time was from 120 to 400 ms depending on the grating resolution for a 0.05 mm2 frame, the total printing time for the size of the 25×25 mm2 OVD was about 2.5 hours for a 1D element, and less than 3.5 hours for a 2D element. Thus, the proposed method and the OVD elements produced by it can be useful to designers of optical security elements as a simpler and faster alternative to electron-beam lithographic technologies.

Geometric-phase intraocular lenses with multifocality

We demonstrate a new type of multifocal and extended depth of focus (EDOF) intraocular lenses (IOLs) embedding μm-thin geometric phase (GP) lens layers. As an emerging approach for lens phase design, the GP modulated IOLs outperform conventional diffractive IOLs in multifocality while completely avoiding the clinically undesirable demand for additional surface patterns to standard monofocal IOL designs. The number of foci and light splitting ratio of the GP IOLs are adjusted by changing the number of stacked GP layers and the thickness of each layer. Bifocal and trifocal GP IOLs are fabricated by radial alignment of anisotropic orientation in UV-curable liquid crystal polymers. After characterizing the defocus image and modulation transfer function of the GP IOLs, it is expected that GP IOLs will alleviate the most common problems associated with multifocal and EDOF IOLs, blurred vision and photic phenomena caused by light scattering and posterior capsule opacification.

Dot-Matrix Hologram Rendering Algorithm and its Validation through Direct Laser Interference Patterning

The fight against forgery of valuable items demands efficient and reasonably priced solutions. A security tag featuring holographic elements for anti-counterfeiting is one of them. However, the content and colours of a diffraction image that would be seen by an observer are often counterintuitive in the design stage. Here, we propose an original algorithm based on the conical diffraction formalism, which can be used to describe the variations of a diffraction image with respect to all aspects of observation. We validate the output of the algorithm by comparing it to test holograms, which we have produced by employing direct laser interference patterning (DLIP) in electrochemically grown nickel foil. We have employed a motorized femtosecond laser system to micro-machine arrays of 65 µm × 65 µm sized diffraction gratings with a defined orientation and pitch on the order of 1 µm. Based on completed diffraction efficiency measurements, we determined optimal ablation parameters, i.e. 57.4 mJ/cm² fluence per pulse and 1100 pulses/pixel. Furthermore, we show how accurate the proposed algorithm is through measured diffraction spectra as well as captured diffraction images of test holograms produced using the obtained parameters. Finally, we showcase anti-counterfeiting tag prototypes with complex holographic effects, i.e. colour reconstruction, animation effects, and image multiplexing. The proposed algorithm can severely shorten the time between design and production of a holographic tag, especially when realizing it via a competitive origination technology—DLIP.

Design, fabrication and characterization of Computer Generated Holograms for anti-counterfeiting applications using OAM beams as light decoders

In this paper, we present the design, fabrication and optical characterization of computer-generated holograms (CGH) encoding information for light beams carrying orbital angular momentum (OAM). Through the use of a numerical code, based on an iterative Fourier transform algorithm, a phase-only diffractive optical element (PO-DOE) specifically designed for OAM illumination has been computed, fabricated and tested. In order to shape the incident beam into a helicoidal phase profile and generate light carrying phase singularities, a method based on transmission through high-order spiral phase plates (SPPs) has been used. The phase pattern of the designed holographic DOEs has been fabricated using high-resolution Electron-Beam Lithography (EBL) over glass substrates coated with a positive photoresist layer (polymethylmethacrylate). To the best of our knowledge, the present study is the first attempt, in a comprehensive work, to design, fabricate and characterize computer-generated holograms encoding information for structured light carrying OAM and phase singularities. These optical devices appear promising as high-security optical elements for anti-counterfeiting applications.

Fabrication of diffraction based security elements using direct laser interference patterning

Product piracy impacts wide areas of the global economy resulting in multi-billion dollar losses per year. Therefore, product protection technologies are required to produce security elements with high flexibility and complexity. In this work, the fabrication of diffraction-based security elements, so called grating cell arrays, using direct laser interference patterning is presented. Ultraviolet two-beam interference patterning is used to structure line-like gratings into 80 µm in diameter spots with spatial periods ranging from 0.7 µm to 2.2 µm on PET substrates. The developed grating cell arrays are generated by the combination of several holographic surface gratings with variable spatial period and pattern orientation. The stored security information can be visualized by illumination with a coherent light source such as a laser pointer.

Fabrication of digital rainbow holograms and 3-D imaging using SEM based e-beam lithography

Here we present an approach for creating full-color digital rainbow holograms based on mixing three basic colors. Much like in a color TV with three luminescent points per single screen pixel, each color pixel of initial image is presented by three (R, G, B) distinct diffractive gratings in a hologram structure. Change of either duty cycle or area of the gratings are used to provide proper R, G, B intensities. Special algorithms allow one to design rather complicated 3D images (that might even be replacing each other with hologram rotation). The software developed ("RainBow") provides stability of colorization of rotated image by means of equalizing of angular blur from gratings responsible for R, G, B basic colors. The approach based on R, G, B color synthesis allows one to fabricate gray-tone rainbow hologram containing white color what is hardly possible in traditional dot-matrix technology. Budgetary electron beam lithography based on SEM column was used to fabricate practical examples of digital rainbow hologram. The results of fabrication of large rainbow holograms from design to imprinting are presented. Advantages of the EBL in comparison to traditional optical (dot-matrix) technology is considered.

Pattern composed of two-dimensional diffusion dots for showing dynamic images

A new type of diffusion pattern is proposed. The proposed patterns are composed of 2D diffusion dots. The diffusion dots are created on a photoresist plate by recording the image of a local area of a piece of ground glass dot by dot. An imaging lens covered by a mask with a slit aperture is used to form the image. By changing the orientation of the slit aperture on the mask plane, the diffusion dots can have different microintensity distributions for the same incident light beam. Therefore the diffusion dots created by the same slit aperture orientation show the same brightness, and the diffusion dots created by different slit orientations show different brightness for the same illuminating and viewing conditions. Thus a proposed diffusion pattern can show dynamic images by changing its illuminating or viewing directions. By applying the double-exposure technique to the diffusion dots of a pattern, the pattern not only can show dynamic effects but also can possess several hidden features for identifying the pattern. Therefore the proposed patterns are dynamic and anticounterfeiting.

Using random features of dot-matrix holograms for anticounterfeiting

The images on a dot-matrix hologram contain many two-dimensional (2D) dots with different grating orientations and different grating pitches. Because the zeroth-order light nondiffracted by different grating structures has the same progress direction, the nondiffracted light can be diffracted to a 2D spot spectrum by the 2D dot structure. The 2D spot spectrum depends on grating depths and dot sizes. Although ordinary noises are troublesome for 2D spots, noises caused by special dot arrangement defects or special grating moiré fringes are useful in checking holograms. Since the features of grating depths, dot sizes, dot arrangement defects, and grating moiré fringes can be randomly changed on a case by case basis, 2D spot spectra in different cases are different. The aforementioned random features are used to identify dot-matrix holograms.

Synthetic diffractive elements for security applications realized on an enhanced integral dot-matrix system

One of the important fields of application of synthetic diffractive structures is optical document security. Several methods of security enhancement of diffractive elements for security applications are presented, namely, high carrier-frequency cryptograms and noise-covered elements are introduced. Structures are designed with respect to the fabrication on special enhanced integral dot-matrix system.