Tunable fluidic lens with a dynamic high-order aberration control

Tunable liquid lens for three-photon excitation microscopy

We demonstrate a novel electrowetting liquid combination using a room temperature ionic liquid (RTIL) and a nonpolar liquid, 1-phenyl-1-cyclohexene (PCH) suitable for focus-tunable 3-photon microscopy. We show that both liquids have over 90% transmission at 1300 nm over a 1.1 mm pathlength and an index of refraction contrast of 0.123. A lens using these liquids can be tuned from a contact angle of 133 to 48° with applied voltages of 0 and 60 V, respectively. Finally, a three-photon imaging system including an RTIL electrowetting lens was used to image a mouse brain slice. Axial scans taken with an electrowetting lens show excellent agreement with images acquired using a mechanically scanned objective.

Three-phase electrowetting liquid lens with deformable liquid iris

Inspired by the arrangement of iris and crystalline lens in human eyes, we propose a three-phase electrowetting liquid lens with a deformable liquid iris (TELL-DLI). The proposed electrowetting liquid lens has three-phase fluid: air, conductive liquid, and dyed insulating liquid. The insulating liquid is distributed on the inner wall of the chamber in a ring shape. By applying voltage, the contact angle is changed, so that the dyed insulating liquid contracts towards the center, which is similar to the contraction of iris and the function of crystalline lens muscle in human eyes. The variation range of focal length is from -451.9 mm to -107.9 mm. The variation range of the aperture is from 4.89 mm to 0.6 mm. Under the step voltage of 200 V, the TELL-DLI can be switched between the maximum aperture state and the zero aperture state, and the switching time is ∼150/200 ms. Because of the discrete electrodes, TELL-DLI can regionally control the shape and position of the iris, and switch between circle, ellipse, sector, and strip. The TELL-DLI has a wide application prospect in imaging systems, such as microscopic imaging system, and has the potential to be applied in the field of complex beam navigation.

Phase retrieval for the generation of arbitrary intensity distributions using an optofluidic phase shifter

An optofluidic phase shifter can be used to generate virtually arbitrary intensity patterns, but only if the phase shift generated by the controllably deformed fluidic surface can be appropriately defined. To enable this functionality, we present two phase retrieval algorithms based on neural networks and least-squares optimization which are used to determine the necessary phase profile to generate a desired target intensity pattern with high accuracy. We demonstrate the utility of the algorithms by showing experimentally the ability of an optofluidic phase shifter to generate arbitrary complex intensity distributions.

Fabrication and characterization of a two-dimensional individually addressable electrowetting microlens array

We demonstrate a two-dimensional, individually tunable electrowetting microlens array fabricated using standard microfabrication techniques. Each lens in our array has a large range of focal tunability from -1.7 mm to -∞ in the diverging regime, which we verify experimentally from 0 to 75 V for a device coated in Parylene C. Additionally, each lens can be actuated to within 1% of their steady-state value within 1.5 ms. To justify the use of our device in a phase-sensitive optical system, we measure the wavefront of a beam passing through the center of a single lens in our device over the actuation range and show that these devices have a surface quality comparable to static microlens arrays. The large range of tunability, fast response time, and excellent surface quality of these devices open the door to potential applications in compact optical imaging systems, transmissive wavefront shaping, and beam steering.

Axisymmetrical resonance modes in an electrowetting optical lens

Electrowetting-based adaptive optics are of great interest for applications ranging from confocal microscopy to LIDAR, but the impact of low-frequency mechanical vibration on these devices remains to be studied. We present a simple theoretical model for predicting the resonance modes induced on the liquid interface in conjunction with a numerical simulation. We experimentally confirm the resonance frequencies by contact angle modulation. They are found to be in excellent agreement with the roots of the zero-order Bessel functions of the first kind. Next, we experimentally verify that external axial vibration of an electrowetting lens filled with density mismatched liquids (Δρ = 250 kg/m³) will exhibit observable Bessel modes on the liquid-liquid interface. An electrowetting lens filled with density matched liquids (Δρ = 4 kg/m³) is robust to external axial vibration and is shown to be useful in mitigating the effect of vibrations in an optical system.

Adaptive aberration correction using an electrowetting array

We demonstrate a method that permits wavefront aberration correction using an array of electrowetting prisms. A fixed high fill factor microlens array followed by a lower fill factor adaptive electrowetting prism array is used to correct wavefront aberration. The design and simulation of such aberration correction mechanism is described. Our results show significant improvement to the Strehl ratio by using our aberration correction scheme which results in diffraction limited performance. Compactness and effectiveness of our design can be implemented in many applications that require aberration correction, such as microscopy and consumer electronics.

Adaptive liquid lens with a tunable field of view

In this paper, we demonstrate an adaptive liquid lens with a tunable field of view (FOV). The proposed liquid lens consists of an actuator and a lens chamber, the annular sheet is just placed on the liquid-liquid (L-L) interface in order to change the curvature and steer the tilt angle of the interface. Different from the conventional FOV adjustable lens combined with a liquid lens and a liquid prism, the proposed lens requires only one L-L interface to achieve the focal length change and FOV deflection. Moreover, the proposed lens reduces aberrations while maintaining high resolution. The experiments show that the optical power range is -27 m^-1 to 30 m^-1. It can realize the FOV deflection while tuning the focal length, with an angular resolution of 37"05. The proposed lens can be applied to telescopic system and microscopic system.

Design of an all-liquid anamorphic imaging device

The design of a novel anamorphic optofluidic imaging system based on a pair of liquid lenses whose toroidal surfaces create different optical powers in the symmetry-axes is presented. Using electrowetting-ondieletrics for actuation, a cylindrical fluidic system is actuated by 32 azimuthally-distributed electrodes allowing the definition of non-rotationally-symmetric surface shapes. We present the design and simulation of this optical system and show that an anamorphic ratio of 1.43 at a maximum field of view of 6:82° is attainable.