Lightweight diode laser spectrometer CHILD (Compact High-altitude iN-situ Laser Diode) for balloonborne measurements of water vapor and methane

Near-infrared dual-gas sensor for simultaneous detection of CO and CH4 using a double spot-ring plane-concave multipass cell and a digital laser frequency stabilization system

A novel double spot-ring plane-concave multipass cell (DSPC-MPC) gas sensor was proposed for simultaneous detection of trace gases, which has lower cost and higher mirror utilization than the traditional multipass cell with 129 m, 107 m, 85 m, 63 m and 40 m effective optical path lengths adjustable. The performance of the DSPC-MPC gas sensor was evaluated by measuring CO and CH4 using two narrow linewidth distributed feedback lasers with center wavelengths of 1567 nm and 1653 nm, respectively. An adjustable digital PID laser frequency stabilization system based on LabVIEW platform was developed to continuously stabilize the laser frequency within ∼±30.3 MHz. The Allan deviation results showed that the minimum detection limits for CO and CH4 were 0.07 ppmv and 0.008 ppmv at integration times of 711 s and 245 s, respectively. The proposed concept of DSPC-MPC provides more ideas for the realization of gas detection under different absorption path lengths and the development of multi-component gas sensing systems.

Evaluation of Spatial Gas Temperature and Water Vapor Inhomogeneities in TDLAS in Circular Multipass Absorption Cells Used for the Analysis of Dynamic Tube Flows

The use of optical circular multipass absorption cells (CMPAC) in an open-path configuration enables the sampling free analysis of cylindrical gas flows with high temporal resolution and only minimal disturbances to the sample gas in the pipe. Combined with their robust unibody design, CMPACs are a good option for many applications in atmospheric research and industrial process monitoring. When deployed in an open-path configuration, the effects of inhomogeneities in the gas temperature and composition have to be evaluated to ensure that the resulting measurement error is acceptable for a given application. Such an evaluation needs to consider the deviations caused by spectroscopic effects, e.g., nonlinear effects of temperature variations on the intensity of the spectral line, as well as the interaction of the temperature and concentration field with the characteristic laser beam pattern of the CMPAC. In this work we demonstrate this novel combined evaluation approach for the CMPAC used as part of the tunable diode laser absorption spectroscopy (TDLAS) reference hygrometer in PTB's dynH2O setup for the characterization of the dynamic response behavior of hygrometers. For this, we measured spatially resolved, 2D temperature and H2O concentration distributions, and combined them with spatially resolved simulated spectra to evaluate the inhomogeneity effects on the line area of the used H2O spectral line at 7299.43 cm-1. Our results indicate that for dynH2O, the deviations caused by the interaction between large concentration heterogeneities and the characteristic sampling of the beam pattern of the CMPAC are three orders of magnitude larger than deviations caused by small temperature heterogeneity induced spectroscopic effects. We also deduce that the assumption that the "path-integrated" H2O concentration derived with the open-path CMPAC setup represents an accurate H2O area average in the flow section covered by the CMPAC in fact shows significant differences of up to 16% and hence does not hold true when large H2O concentration gradients are present.

Open-Path Atmospheric Transmission of Diode-Pumped Alkali Lasers in Maritime and Desert Environments

A tunable diode laser absorption spectroscopy (TDLAS) device has been developed to study long-path atmospheric transmission near diode pumped alkali laser (DPAL) emission wavelengths. By employing a single aperture and retro reflector in a mono-static configuration, the noise associated with atmospheric and platform jitter were reduced by a factor of ∼30 and the open-air path length was extended to 4.4 km and over a very broad spectral range, up to 120 cm^-1. Water vapor absorption lines near the rubidium (Rb) and cesium (Cs) variants of the DPAL near 795 and 894 nm, oxygen lines near the potassium (K) DPAL near 770 nm, and water vapor absorption in the vicinity of the neodymium-doped yttrium aluminum garnet (Nd:YAG) laser 1.064 μm and chemical oxygen iodine laser (COIL) 1.3 μm lines were studied. The detection limit for path absorbance increases from ΔA = 0.0017 at 100 m path length to 0.085 for the 4.4 km path. Comparison with meteorological instruments for maritime and desert environments yields agreement for the 2.032 km path to within 1.5% for temperature, 4.5% for pressure, and 5.1% for concentration, while agreements for the 4.4 km path are within 1.4% for temperature, 7.7% for pressure, and 23.5% for concentration. An intra cavity output spectroscopy (ICOS) device was also used as a spectral reference to verify location of atmospheric lines. Implications of TDLAS collection system design on signal-to-noise (S/N) are discussed as well as the effect of path turbulence on baseline noise and inform the selection of the DPAL variant least affected by molecular absorption.

From Light Pipes to Substrate-Integrated Hollow Waveguides for Gas Sensing: A Review

Absorption-based spectroscopy in the mid-infrared (MIR) spectral range (i.e., 2.5-25 μm) is an excellent choice for directly sensing trace gas analytes providing discriminatory molecular information due to inherently specific fundamental vibrational, rovibrational, and rotational transitions. Complimentarily, the miniaturization of optical components has aided the utility of optical sensing techniques in a wide variety of application scenarios that demand compact, portable, easy-to-use, and robust analytical platforms yet providing suitable accuracy, sensitivity, and selectivity. While MIR sensing technologies have clearly benefitted from the development of advanced on-chip light sources such as quantum cascade and interband cascade lasers and equally small MIR detectors, less attention has been paid to the development of modular/tailored waveguide technologies reproducibly and reliably interfacing photons with sample molecules in a compact format. In this context, the first generation of a new type of hollow waveguides gas cells-the so-called substrate-integrated hollow waveguides (iHWG)-with unprecedented compact dimensions published by the research team of Mizaikoff and collaborators has led to a paradigm change in optical transducer technology for gas sensors. Features of iHWGs included an adaptable (i.e., designable) well-defined optical path length via the integration of meandered hollow waveguide structures at virtually any desired dimension and geometry into an otherwise planar substrate, a high degree of robustness, compactness, and cost-effectiveness in fabrication. Moreover, only a few hundred microliters of gas samples are required for analysis, resulting in short sample transient times facilitating a real-time monitoring of gaseous species in virtually any concentration range. In this review, we give an overview of recent advancements and achievements since their introduction eight years ago, focusing on the development of iHWG-based mid-infrared sensor technologies. Highlighted applications ranging from clinical diagnostics to environmental and industrial monitoring scenarios will be contrasted by future trends, challenges, and opportunities for the development of next-generation portable optical gas-sensing platforms that take advantage of a modular and tailorable device design.

H2O Collisional Broadening Coefficients at 1.37 µm and Their Temperature Dependence: A Metrology Approach

We report self- and air collisional broadening coefficients for the H2O line at 7299.43 cm−1 and corresponding temperature coefficients for a temperature range spanning 293–573 K. New laser spectroscopic setups specifically designed for this purpose have been developed and are described. The line parameters reported here are in good agreement with those values reported in the HITRAN 2020 database, but the uncertainties have been reduced by factors of about 4, 1.3 and 4.4 for the self-broadening coefficient, air broadening coefficient and the temperature exponent of air broadening, respectively. Further, we combined our measurement approach with metrological data quality objectives, addressing the traceability of the results to the international system of units (SI) and evaluated the uncertainties following the guide to the expression of uncertainty in measurement (GUM).

Compact, circular, and optically stable multipass cell for mobile laser absorption spectroscopy

Compact and lightweight laser absorption spectrometers for accurate trace gas measurements are of great scientific and commercial importance. In these instruments, the multipass cell (MPC) represents a critical element in terms of achievable size and sensitivity. Herein, we introduce a versatile MPC concept which unifies compactness, mechanical rigidity, and optical stability. Relying on fundamental cavity design principles and modern diamond turning techniques, we have developed a segmented circular MPC that allows efficient and interference-free beam folding. A prototype cell is presented featuring up to 10 m optical path length at a total mass of less than 200 g. Incorporated in a highly compact setup without additional beam pre-shaping optics, we demonstrate a normalized noise level of low 10^-4 (2σ) at 1 Hz.

Tunable Diode Laser Absorption Spectroscopy Sensor for Calibration Free Humidity Measurements in Pure Methane and Low CO2 Natural Gas

We report a new direct tunable diode laser absorption spectroscopy (dTDLAS) sensor for absolute measurements of H₂O in methane, ethane, propane, and low CO₂ natural gas. The sensor is operated with a 2.7 µm DFB laser, equipped with a high pressure single pass gas cell, and used to measure H₂O amount of substance fractions in the range of 0.31-25 000 µmol/mol. Operating total gas pressures are up to 5000 hPa. The sensor has been characterized, addressing the traceability of the spectrometric results to the SI and the evaluation of the combined uncertainty, following the guide to the expression of uncertainty in measurement (GUM). The relative reproducibility of H₂O amount of substance fraction measurements at 87 µmol/mol is 0.26% (0.23 µmol/mol). The maximum precision of the sensor was determined using a H₂O in methane mixture, and found to be 40 nmol/mol for a time resolution of 100 s. This corresponds to a normalized detection limit of 330 nmol mol^-1·m Hz^-1/2. The relative combined uncertainty of H₂O amount fraction measurements delivered by the sensor is 1.2%.

SEALDH-II-An Autonomous, Holistically Controlled, First Principles TDLAS Hygrometer for Field and Airborne Applications: Design-Setup-Accuracy/Stability Stress Test

Instrument operation in harsh environments often significantly impacts the trust level of measurement data. While commercial instrument manufacturers clearly define the deployment conditions to achieve trustworthy data in typical standard applications, it is frequently unavoidable in scientific field applications to operate instruments outside these commercial standard application specifications. Scientific instrumentation, however, is employing cutting-edge technology and often highly optimized but also lacks long-term field tests to assess the field vs. laboratory performance. Recently, we developed the Selective Extractive Laser Diode Hygrometer (SEALDH-II), which addresses field and especially airborne applications as well as metrological laboratory validations. SEALDH-II targets reducing deviations between airborne hygrometers (currently up to 20% between the most advanced hygrometers) with a new holistic, internal control and validation concept, which guarantees the transfer of the laboratory performance into a field scenario by capturing more than 80 instrument internal "housekeeping" data to nearly perfectly control SEALDH-II's health status. SEALDH-II uses a calibration-free, first principles based, direct Tuneable Diode Laser Absorption Spectroscopy (dTDLAS) approach, to cover the entire atmospheric humidity measurement range from about 3 to 40,000 ppmv with a calculated maximum uncertainty of 4.3% ± 3 ppmv. This is achieved not only by innovations in internal instrument monitoring and design, but also by active control algorithms such as a high resolution spectral stabilization. This paper describes the setup, working principles, and instrument stabilization, as well as its precision validation and long-term stress tests in an environmental chamber over an environmental temperature and humidity range of ΔT = 50 K and ΔRH = 80% RH, respectively.

Direct single-mode fibre-coupled miniature White cell for laser absorption spectroscopy

We present the design, setup, and characterization of a new lens-free fibre-coupled miniature White cell for extractive gas analysis using direct tunable diode laser absorption spectroscopy (dTDLAS). The construction of this cell is based on a modified White cell design and allows for an easy variation of the absorption length in the range from 29 cm to 146 cm. The design avoids parasitic absorption paths outside the cell by using direct, lensless fibre coupling and allows small physical cell dimensions and cell volumes. To characterize the cell performance, different H2O and CH4 concentration levels were measured using dTDLAS. Detection limits of 2.5 ppm ⋅ m for CH4 (at 1.65 μm) and 1.3 ppm ⋅ m for H2O (at 1.37 μm) were achieved. In addition, the gas exchange time and its flow-rate dependence were determined for both species and found to be less than 15 s for CH4 and up to a factor of thirteen longer for H2O.

Broadband tunable InAs/InP quantum dot external-cavity laser emitting around 1.55 μm

We report a broadband tunable external-cavity laser based on InAs/InP quantum dots (QDs) grown by metal-organic vapor phase epitaxy. It is found that high AsH₃ flow during the interruption after QD deposition greatly promotes QD ripening, which improves the optical gain of QD active medium in lower energy states. Combined with anti-reflection/high-reflection facet coatings, a broadly tunable InAs/InP QD external-cavity laser was realized with a tuning range of 140.4 nm across wavelengths from 1436.6 nm to 1577 nm at a maximum output power of 6 mW.

Rapid, time-division multiplexed, direct absorption- and wavelength modulation-spectroscopy

We present a tunable diode laser spectrometer with a novel, rapid time multiplexed direct absorption- and wavelength modulation-spectroscopy operation mode. The new technique allows enhancing the precision and dynamic range of a tunable diode laser absorption spectrometer without sacrificing accuracy. The spectroscopic technique combines the benefits of absolute concentration measurements using calibration-free direct tunable diode laser absorption spectroscopy (dTDLAS) with the enhanced noise rejection of wavelength modulation spectroscopy (WMS). In this work we demonstrate for the first time a 125 Hz time division multiplexed (TDM-dTDLAS-WMS) spectroscopic scheme by alternating the modulation of a DFB-laser between a triangle-ramp (dTDLAS) and an additional 20 kHz sinusoidal modulation (WMS). The absolute concentration measurement via the dTDLAS-technique allows one to simultaneously calibrate the normalized 2f/1f-signal of the WMS-technique. A dTDLAS/WMS-spectrometer at 1.37 µm for H2O detection was built for experimental validation of the multiplexing scheme over a concentration range from 50 to 3000 ppmV (0.1 MPa, 293 K). A precision of 190 ppbV was achieved with an absorption length of 12.7 cm and an averaging time of two seconds. Our results show a five-fold improvement in precision over the entire concentration range and a significantly decreased averaging time of the spectrometer.

A new direct absorption tunable diode laser spectrometer for high precision measurement of water vapor in the upper troposphere and lower stratosphere

We present a new instrument for the measurement of water vapor in the upper troposphere and lower stratosphere (UT∕LS), the Harvard Herriott Hygrometer (HHH). HHH employs a tunable diode near-IR laser to measure water vapor via direct absorption in a Herriott cell. The direct absorption technique provides a direct link between the depth of the observed absorption line and the measured water vapor concentration, which is calculated based on spectroscopic parameters in the HITRAN database. While several other tunable diode laser (TDL) instruments have been used to measure water vapor in the UT∕LS, HHH is set apart by its use of an optical cell an order of magnitude smaller than those of other direct absorption TDLs in operation, allowing for a more compact, lightweight instrument. HHH is also unique in its integration into a common duct with the Harvard Lyman-α hygrometer, an independent photo-fragment fluorescence instrument which has been thoroughly validated over 19 years of flight measurements. The instrument was flown for the first time in the Mid-latitude Airborne Cirrus Properties Experiment (MACPEX) on NASA's WB-57 aircraft in spring, 2011, during which it demonstrated in-flight precision of 0.1 ppmv (1 s) with 1-sigma uncertainty of 5% ± 0.7 ppmv. Since the campaign, changes to the instrument have lead to improved accuracy of 5% ± 0.2 ppmv as demonstrated in the laboratory. During MACPEX, HHH successfully measured water vapor at concentrations from 3.5 to 600 ppmv in the upper troposphere and lower stratosphere. HHH and Lyman-α, measuring independently but under the same sampling conditions, agreed on average to within 1% at water vapor mixing ratios above 20 ppmv and to within 0.3 ppmv at lower mixing ratios. HHH also agreed with a number of other in situ water vapor instruments on the WB-57 to within their stated uncertainties, and to within 0.7 ppmv at low water. This agreement constitutes a significant improvement over past in situ comparisons, in which differences of 1.5-2 ppmv were routinely observed, and demonstrates that the accuracy of HHH is consistent with other instruments which use a range of detection methods and sampling techniques.

Broadband time-domain absorption spectroscopy with a ns-pulse supercontinuum source

A Q-switched laser based system for broadband absorption spectroscopy in the range of 1390-1740 nm (7200-5750 cm(-1)) has been developed and tested. In the spectrometer the 1064 nm light of a 25 kHz repetition-rate micro-chip Nd:YAG laser is directed into a photonic crystal fiber to produce a short (about 2 ns) pulse of radiation in a wide spectral range. This radiation is passed through a 25 km long dispersive single-mode fiber in order to spread the respective wavelengths over a time interval of about 140 ns at the fiber output. This fast swept-wavelength light source allows to record gas absorption spectra by temporally-resolved detection of the transmitted light power. The realized spectral resolution is about 2 cm(-1). Examples of spectra recorded in a cell with CO(2):CH(4):N(2) gas mixtures are presented. An algorithm employed for the evaluation of molar concentrations of different species from the spectra with non-overlapping absorption bands of mixture components is described. The uncertainties of the concentration values retrieved at different acquisition times due to the required averaging are evaluated. As an example, spectra with a signal-to-noise ratio large enough to provide species concentrations with a relative error of 5% can be obtained in real time at a millisecond time scale. Potentials and limitations of this technique are discussed.

Distributed feedback diode laser spectrometer at 2.7 microm for sensitive, spatially resolved H2O vapor detection

A new, compact, spatially scanning, open-path 2.7 microm tunable diode laser absorption spectrometer with short absorption path lengths below 10 cm was developed to analyze the spatiotemporal dynamics of one-dimensional (1D) spatial water vapor gradients. This spectrometer, which is based on a room-temperature distributed feedback diode laser, is capable of measuring absolute, calibration-free, line-of-sight averaged, but laterally resolved 1D H(2)O concentration profiles with a minimum fractional optical resolution of 2.1x10(-3) optical density (OD) (2.5x10(-4) OD after a background subtraction procedure), which permits a signal-to-noise-ratio of 407 (3400) at 10,000 parts in 10(6) (ppm)H(2)O, or normalized sensitivities of 2.6 ppm x m (0.32 ppm m) at 0.5 Hz duty cycle. The spectrometer's lateral spatial resolution (governed by the 500 microm sampling beam diameter) was validated by analyzing a well-defined laminar jet of nitrogen gas in humidified air. This scanning setup was then used to (a) quantitatively investigate for what we believe to be the first time the H(2)O boundary layer from 0.7 to 11 mm beneath the stomatous side of a single, undetached plant leaf, and (b) to study the temporal boundary layer dynamics and its dependence on stepwise light stimulation of the photosynthetic system. In addition the 2.7 microm diode laser was carefully characterized in terms of spectral purity, beam profile, as well as quasi-static and dynamic wavelength tuning coefficients.

Nonaligned carbon nanotubes anchored on porous alumina: formation, process modeling, gas-phase analysis, and field-emission properties

We have developed a chemical vapor deposition (CVD) process for the catalytic growth of carbon nanotubes (CNTs), anchored in a comose-type structure on top of porous alumina substrates. The mass-flow conditions of precursor and carrier gases and temperature distributions in the CVD reactor were studied by transient computational fluid dynamic simulation. Molecular-beam quadrupole mass spectroscopy (MB-QMS) has been used to analyze the gas phase during ferrocene CVD under reaction conditions (1073 K) in the boundary layer near the substrate. Field-emission (FE) properties of the nonaligned CNTs were measured for various coverages and pore diameters of the alumina. Samples with more dense CNT populations provided emitter-number densities up to 48,000 cm(-2) at an electric field of 6 V microm(-1). Samples with fewer but well-anchored CNTs in 22-nm pores yielded the highest current densities. Up to 83 mA cm(-2) at 7 V microm(-1) in dc mode and more than 200 mA cm(-2) at 11 V microm(-1) in pulsed diode operation have been achieved from a cathode size of 24 mm2.

Simultaneous diode-laser-based in situ measurement of liquid water content and oxygen mole fraction in dense water mist environments

We performed what we believe are the first simultaneous in situ measurements of liquid water and oxygen concentrations in a dense water mist environment. Direct absorption tunable diode laser absorption spectroscopy was used to make oxygen concentrations and simultaneously quantify the liquid water via optical density measurements. This spectrometer with an absorption path length of only 36.8 cm was successfully tested during full-scale fire suppression tests with scattering losses up to 99.9%. The simultaneous oxygen and liquid water concentration measurements agree with fire suppression model calculations.

Aerosol Chamber Study of Optical Constants and N2O5 Uptake on Supercooled H2SO4/H2O/HNO3 Solution Droplets at Polar Stratospheric Cloud Temperatures

The mechanism of the formation of supercooled ternary H(2)SO(4)/H(2)O/HNO(3) solution (STS) droplets in the polar winter stratosphere, i.e., the uptake of nitric acid and water onto background sulfate aerosols at T < 195 K, was successfully mimicked during a simulation experiment at the large coolable aerosol chamber AIDA of Forschungszentrum Karlsruhe. Supercooled sulfuric acid droplets, acting as background aerosol, were added to the cooled AIDA vessel at T = 193.6 K, followed by the addition of ozone and nitrogen dioxide. N(2)O(5), the product of the gas phase reaction between O(3) and NO(2), was then hydrolyzed in the liquid phase with an uptake coefficient gamma(N(2)O(5)). From this experiment, a series of FTIR extinction spectra of STS droplets was obtained, covering a broad range of different STS compositions. This infrared spectra sequence was used for a quantitative test of the accuracy of published infrared optical constants for STS aerosols, needed, for example, as input in remote sensing applications. The present findings indicate that the implementation of a mixing rule approach, i.e., calculating the refractive indices of ternary H(2)SO(4)/H(2)O/HNO(3) solution droplets based on accurate reference data sets for the two binary H(2)SO(4)/H(2)O and HNO(3)/H(2)O systems, is justified. Additional model calculations revealed that the uptake coefficient gamma(N(2)O(5)) on STS aerosols strongly decreases with increasing nitrate concentration in the particles, demonstrating that this so-called nitrate effect, already well-established from uptake experiments conducted at room temperature, is also dominant at stratospheric temperatures.