Inexpensive detector for terahertz imaging

Fast and Enhanced MMW Imaging System Using a Simple Row Detector Circuit with GDDs as Sensor Elements and an FFT-Based Signal Acquisition System

The relatively high atmospheric propagation of millimeter-waves (MMW) was found to be one of the most critical reasons for the development of reliable sensors for MMW detection. According to previous research works, it has been already shown that incident MMW radiation on a glow discharge detector (GDD) can increase the discharge current. Hence, the electrical mode of detection can be employed to detect the presence of MMW radiation. In this article, a new design of a row detector using GDDs as pixel elements, and the influence of MMW incidence on GDD's discharge current, were acquired using an elementary data acquisition (DAQ) platform. The DAQ system computes the averaged Fast Fourier Transform (FFT) spectrum of the time signal and returns the FFT results as magnitude based on the level of detection. An FFT-based signal acquisition proved to be a better alternative to the lock-in detection that was commonly used in MMW detection systems. This improved detection circuit provides enhanced noise filtering, thereby resulting in better MMW images within a short time. The overhead expense of the entire system is very low, as it can avoid lock-in amplifier stages that were previously used for signal enhancement. A scanning mechanism using a motorized translation stage (step motor) is involved to place and align the row detector in the image plane. The scanning can be carried out vertically to perform the imaging, by configuring the step motor after selecting the desired step size and position. A simplified version of the MMW detection circuit with a dedicated over-voltage protection facility is presented here. This made the detection system more stable and reliable during its operation. The MMW detection circuit demonstrated in this work was found to be a milestone to develop larger focal plane arrays (FPA) with very inexpensive sensor elements.

Comparison between Up-Conversion Detection in Glow-Discharge Detectors and the Schottky Diode for MMW/THz High-Power Single Pulse

Generally, glow-discharge detectors (GDD), acting on miniature neon indicator lamps, and Schottky diode detectors serve as efficient, fast, and room-temperature millimeter wave (MMW)/THz detectors. Previous studies on GDD implemented a repetition of terahertz sources, and low-power radiation, and showed good results in terms of detection, responsivity, and noise-equivalent power. This paper presents a comparison between a detector based on a GDD lamp and a Schottky diode detector for the detection of a high-power single pulse. With this comparison, we touch upon two GDD detection methods, the visual light emitting from the GDD and the electrical current of the GDD detector. Results showed better response time and better sensitivity for the GDD detection method compared to with the Schottky diode.

Ultra-wideband and inexpensive glow discharge detector for millimeter-wave wireless communication based on upconversion to visual light

Data traffic is increasing rapidly, especially on wireless channels, pushing the carrier frequency to the X, K, and millimeter-wave (MMW) bands. This requires development of new technologies and communication components operating at those bands. The detectors and receivers for those bands are very expensive, have high sensitivity to electrostatic discharge, and can be damaged by high incident power. An ultra-wideband and inexpensive glow discharge detector (GDD) is presented here. The GDD was found to be an excellent microwave and MMW radiation detector. The detection mechanism presented here is based on upconversion of microwave and MMW radiation to visual light. The experimental results demonstrate ultra-wideband detection at X and at MMW bands. These results present a proof of concept for the ability of our system to be used as a detector in wireless communication for the 5th generation.

Capability of long distance 100 GHz FMCW using a single GDD lamp sensor

Millimeter wave (MMW)-based imaging systems are required for applications in medicine, homeland security, concealed weapon detection, and space technology. The lack of inexpensive room temperature imaging sensors makes it difficult to provide a suitable MMW system for many of the above applications. A 3D MMW imaging system based on chirp radar was studied previously using a scanning imaging system of a single detector. The radar system requires that the millimeter wave detector will be able to operate as a heterodyne detector. Since the source of radiation is a frequency modulated continuous wave (FMCW), the detected signal as a result of heterodyne detection gives the object's depth information according to value of difference frequency, in addition to the reflectance of the 2D image. New experiments show the capability of long distance FMCW detection by using a large scale Cassegrain projection system, described first (to our knowledge) in this paper. The system presents the capability to employ a long distance of at least 20 m with a low-cost plasma-based glow discharge detector (GDD) focal plane array (FPA). Each point on the object corresponds to a point in the image and includes the distance information. This will enable relatively inexpensive 3D MMW imaging.

Heterodyne detection at 300 GHz using neon indicator lamp glow discharge detector

A miniature neon indicator lamp, also known as a glow discharge detector (GDD), costing about 50 cents, was found to be an excellent room temperature terahertz radiation detector. Proof-of-concept 300 GHz heterodyne detection using GDD is demonstrated in this paper. Furthermore, a comparison to direct detection was carried out as well. Previous results with the GDD at 10 GHz showed 40 times better sensitivity using heterodyne detection compared to direct detection. Preliminary results at 300 GHz showed better sensitivity by a factor of 20 with only 56 μW local-oscillator power using heterodyne compared to direct detection. The higher the local-oscillator power (P(lo)), the better the sensitivity of the detector. Further improvement can be achieved by employing better quasi-optical design.

Performance quantification of a millimeter-wavelength imaging system based on inexpensive glow-discharge-detector focal-plane array

Inexpensive millimeter-wavelength (MMW) optical digital imaging raises a challenge of evaluating the imaging performance and image quality because of the large electromagnetic wavelengths and pixel sensor sizes, which are 2 to 3 orders of magnitude larger than those of ordinary thermal or visual imaging systems, and also because of the noisiness of the inexpensive glow discharge detectors that compose the focal-plane array. This study quantifies the performances of this MMW imaging system. Its point-spread function and modulation transfer function were investigated. The experimental results and the analysis indicate that the image quality of this MMW imaging system is limited mostly by the noise, and the blur is dominated by the pixel sensor size. Therefore, the MMW image might be improved by oversampling, given that noise reduction is achieved. Demonstration of MMW image improvement through oversampling is presented.