Digital holographic microscopy in the deep (193 nm) ultraviolet

Low-intensity illumination for lensless digital holographic microscopy with minimized sample interaction

Exposure to laser light alters cell culture examination via optical microscopic imaging techniques based on label-free coherent digital holography. To mitigate this detrimental feature, researchers tend to use a broader spectrum and lower intensity of illumination, which can decrease the quality of holographic imaging due to lower resolution and higher noise. We study the lensless digital holographic microscopy (LDHM) ability to operate in the low photon budget (LPB) regime to enable imaging of unimpaired live cells with minimized sample interaction. Low-cost off-the-shelf components are used, promoting the usability of such a straightforward approach. We show that recording data in the LPB regime (down to 7 µW of illumination power) does not limit the contrast or resolution of the hologram phase and amplitude reconstruction compared to regular illumination. The LPB generates hardware camera shot noise, however, to be effectively minimized via numerical denoising. The ability to obtain high-quality, high-resolution optical complex field reconstruction was confirmed using the USAF 1951 amplitude sample, phase resolution test target, and finally, live glial restricted progenitor cells (as a challenging strongly absorbing and scattering biomedical sample). The proposed approach based on severely limiting the photon budget in lensless holographic microscopy method can open new avenues in high-throughout (optimal resolution, large field-of-view, and high signal-to-noise-ratio single-hologram reconstruction) cell culture imaging with minimized sample interaction.

Computational On-Chip Imaging of Nanoparticles and Biomolecules using Ultraviolet Light

Significant progress in characterization of nanoparticles and biomolecules was enabled by the development of advanced imaging equipment with extreme spatial-resolution and sensitivity. To perform some of these analyses outside of well-resourced laboratories, it is necessary to create robust and cost-effective alternatives to existing high-end laboratory-bound imaging and sensing equipment. Towards this aim, we have designed a holographic on-chip microscope operating at an ultraviolet illumination wavelength (UV) of 266 nm. The increased forward scattering from nanoscale objects at this short wavelength has enabled us to detect individual sub-30 nm nanoparticles over a large field-of-view of >16 mm² using an on-chip imaging platform, where the sample is placed at ≤0.5 mm away from the active area of an opto-electronic sensor-array, without any lenses in between. The strong absorption of this UV wavelength by biomolecules including nucleic acids and proteins has further enabled high-contrast imaging of nanoscopic aggregates of biomolecules, e.g., of enzyme Cu/Zn-superoxide dismutase, abnormal aggregation of which is linked to amyotrophic lateral sclerosis (ALS) - a fatal neurodegenerative disease. This UV-based wide-field computational imaging platform could be valuable for numerous applications in biomedical sciences and environmental monitoring, including disease diagnostics, viral load measurements as well as air- and water-quality assessment.

High-resolution quantitative phase microscopic imaging in deep UV with phase retrieval

High-resolution three-dimensional (3D) microscopic imaging requires the use of short wavelengths. Quantitative 3D imaging techniques, such as digital holographic microscopy, require interference between the object beam and a known reference background for the extraction of phase information. At shorter wavelengths, due to short coherence lengths, it may be difficult to implement a two-beam off-axis setup. Thus, a single-beam technique, which provides complete phase information, may be better suited for short wavelengths. This Letter describes the development of a quantitative microscopy technique at 193 nm using multiple intensity samplings and phase retrieval.

Nanoscale imaging using deep ultraviolet digital holographic microscopy

A deep ultraviolet off-axis digital holographic microscope (DHM) is presented. The microscope has been arranged with as least as possible optical elements in the imaging path to avoid aberration due to the non-perfect optical elements. A high resolution approach has been implemented in the setup using oblique illumination to overcome the limitation introduced by the optical system. To examine the resolution of the system a nano-structured template has been designed and the result confirms the submicron and nanoscale resolution of the arranged DHM setup.

Cascaded adaptive-mask algorithm for twin-image removal and its application to digital holograms of ice crystals

An iterative Gerchberg-Saxton-type algorithm with a support constraint for twin-image removal from reconstructed Gabor inline holograms of single plane objects is described. It is applied to simulated holograms and to holograms of ice crystals recorded in the laboratory and in atmospheric clouds in situ. The algorithm is characterized by a distinction between object and background region and an iterative adaption of the object mask. Applying the algorithm to recorded inline holograms of atmospheric objects, the twin-image artifacts are removed successfully, for the first time allowing for a proper access to the in situ phase information on atmospheric ice crystals. It is also demonstrated that, after application of the algorithm, previously indiscernible internal object features can become visible for large Fresnel numbers.

Super-resolution in digital holography by a two-dimensional dynamic phase grating

An approach that uses an electro-optically tunable two dimensional phase grating to enhance the resolution in digital holographic microscopy is proposed. We show that, by means of a flexible hexagonal phase grating, it is possible to increase the numerical aperture of the imaging system, thus improving the spatial resolution of the images in two dimensions. The augment of the numerical aperture of the optical system is obtained by recording spatially multiplexed digital holograms. The grating tuneability allows one to adjust the intensity among the spatially multiplexed holograms maximizing the grating diffraction efficiency. Furthermore we demonstrate that the flexibility of the numerical reconstruction allows one to use selectively the diffraction orders carrying useful information for increasing the spatial resolution. The proposed approach can improve the capabilities of digital holography in three-dimensional imaging and microscopy.

Coherence effects in digital in-line holographic microscopy

We analyze the effects of partial coherence in the image formation of a digital in-line holographic microscope (DIHM). The impulse response is described as a function of cross-spectral density of the light used in the space-frequency domain. Numerical simulation based on the applied model shows that a reduction in coherence of light leads to broadening of the impulse response. This is also validated by results from experiments wherein a DIHM is used to image latex beads using light with different spatial and temporal coherence.

Wavefront sensing using speckles with fringe compensation

Wavefront sensing with numerical phase-error correction system is carried out using a random phase plate and phase retrieval using multiple intensity measurements of axially-displaced speckle patterns and the wave propagation equation. Various wavefronts with smooth curvatures incident on the developed phase plate (DPP) are examined: planar, spherical, cylindrical, and a wavefront passing through the side of a bare optical fiber. Spurious fringe pattern in the wavefront reconstructions due to a small tilt (Delta theta=0.212 degrees) in the plane illumination wave is detected and numerically corrected for. Fringe pattern of the illumination wave obtained for the setup without the phase object being investigated is used as reference fringe pattern. Fringe compensation yields wavefronts with the correct shape and numerical value based on the specifications of the setup. The numerical phase-error correction system described in this study can be extended to other types of phase errors such as those due to aberrations if optical elements are present in the setup or due to perturbations in the environment.