Recent progress in high-speed laser diagnostics for hypersonic flows [Invited]

Long-lived nitric oxide molecular tagging velocimetry with 1 + 1 REMPI

The successful demonstration of long-lived nitric oxide (NO) fluorescence for molecular tagging velocimetry (MTV) measurements is described in this Letter. Using 1 + 1 resonance-enhanced multiphoton ionization (REMPI) of NO at a wavelength near 226 nm, targeting the overlapping Q1(7) and Q21(7) lines of the A-X (0, 0) electronic system, the lifetime of the NO MTV signal was observed to be approximately 8.6 µs within a 100-Torr cell containing 2% NO in nitrogen. This is in stark contrast to the commonly reported single photon NO fluorescence, which has a much shorter calculated lifetime of approximately 43 ns at this pressure and NO volume fraction. While the shorter lifetime fluorescence can be useful for molecular tagging velocimetry with single laser excitation within very high-speed flows at some thermodynamic conditions, the longer lived fluorescence shows the potential for an order of magnitude more accurate and precise velocimetry, particularly within lower speed regions of hypersonic flow fields such as wakes and boundary layers. The physical mechanism responsible for the generation of this long-lived signal is detailed. Furthermore, the effectiveness of this technique is showcased in a high-speed jet flow, where it is employed for precise flow velocity measurements.

Tomographic FLEET with a wedge array for multi-point three-component velocimetry

Femtosecond laser electronic excitation tagging (FLEET) velocimetry is an important diagnostic technique for seedless velocimetry measurements particularly in supersonic and hypersonic flows. Typical FLEET measurements feature a single laser line and camera system to achieve one-component velocimetry along a line, although some multiple-spot and multiple-component configurations have been demonstrated. In this work, tomographic imaging is used to track the three-dimensional location of many FLEET spots. A quadscope is used to combine four unique views onto a single high-speed image intensifier and camera. Tomographic reconstructions of the FLEET emission are analyzed for three-component velocimetry from multiple FLEET spots. Glass wedges are used to create many (nine) closely spaced FLEET spots with less than 10% transmission losses. These developments lead to a significant improvement in the dimensionality and spatial coverage of a FLEET instrument with some increases in experimental complexity and data processing. Multiple-point three-component FLEET velocimetry is demonstrated in an underexpanded jet.

Multi-depth focused laser differential interferometer based on chromatic aberration

A modified version of focused laser differential interferometry (FLDI) is demonstrated with adjacent beam pairs distributed along the optical axis. This feature is accomplished using two different wavelengths of light in the interferometer and accounting for the chromatic aberration of the lenses in the optical setup. It is demonstrated that ray trace calculations can be modified to predict the focal points of each of the two different colored beams, and experiments using a tube jet and a laser-induced blast wave show the instrument still has the expected features of an FLDI as well as continued capability for velocimetry. This modification is in effort to allow FLDI to be used for the analysis of three-dimensional flows, especially if combined with other multi-point variations and targeting high-frequency flow content.

Multiline molecular tagging velocimetry of nitric oxide at 100 kHz using an injection-seeded burst-mode OPO

An injection-seeded, burst-mode optical parametric oscillator (OPO) operating at a repetition rate of 100 kHz is used to demonstrate the multiline molecular tagging velocimetry of an underexpanded jet using nitric oxide fluorescence. The very narrow linewidth of the OPO system, along with the relatively high pulse energies of the burst-mode system, enables efficient single-photon excitation of nitric oxide along multiple laser beam lines at a high repetition rate. Simultaneous one-dimensional velocity profile measurements were obtained of an underexpanded jet system at six different locations using a reference initial image and single-shot delayed images. A methodology for calculating the uncertainty of single-shot velocity is also described. Mean and root-mean-square velocity profiles are obtained at multiple locations simultaneously over a sampling time of 1 ms. The high-repetition-rate velocity measurements also appear to capture the onset of velocity oscillations and has the potential to reveal velocity frequency content occurring in the tens of kHz. The demonstrated velocimetry technique could be paired with other emerging burst-mode laser capabilities for a quantitative multiparameter gas property or multicomponent gas velocity measurements for supersonic and hypersonic flows, especially within ground test facilities that are limited to very short run durations.

Multi-point FLEET velocimetry in a Mach 4 Ludwieg tube using a diffractive optical element

A diffractive optical element was paired with femtosecond laser electronic excitation tagging (FLEET) velocimetry and used to probe multiple locations in a high-speed wind tunnel. Two configurations were explored, one that uses the traditional method of viewing from a perspective orthogonal to the beam axis and another that uses a perspective parallel to the beam axis. In the latter, the FLEET emissions are viewed as points that can allow for FLEET measurements in a wall normal fashion without the laser needing to impinge upon the surface. The configurations are demonstrated in a Mach 4 Ludwieg tube, highlighting their utility in high-speed flow measurements.

Laser Applications to Chemical, Security, and Environmental Analysis: introduction to the feature issue

The eighteenth topical meeting on Laser Applications to Chemical, Security, and Environmental Analysis (LACSEA) was held in Vancouver, Canada from 11-15 July 2022, as part of the Optica Optical Sensors and Sensing Congress in a hybrid format allowing on-site and online attendance. The meeting featured a broad range of distinguished papers focusing on recent advances in laser and optical spectroscopy. A total of 52 contributed and invited papers were presented during the meeting, including topics such as photo-acoustic spectroscopy, imaging, non-linear technologies, frequency combs, remote sensing, environmental monitoring, aerosols, combustion diagnostics, hypersonic flow diagnostics, nuclear diagnostics, fs/ps applications, and machine learning and computational sensing.