Complex Fresnel hologram display using a single SLM

Complex amplitude modulated holographic display system based on polarization grating

We propose a holographic display system for complex amplitude modulation (CAM) using a phase-only spatial light modulator (SLM) and two polarization gratings (PG). The two sub-holograms of the complex-amplitude computed generated hologram (CGH) are loaded in different regions of SLM. Two diffractive components couple in space after longitudinal migration from the double PGs, and finally interfered through the line polarizer. The influence of the system error on the reconstructed image quality is analyzed, which provides a theoretical assessment for adding pre-compensation to CGH to compensate the system error. Moreover, on the base of the proposed system, a large depth of field and enlarged display area display is realized and the real-time display can be achieved because of the analytical complex-amplitude computed generated hologram. The optical experimental results show that the proposed system has high energy efficiency, and can provide high-quality holographic display with a large depth of field and enlarged display area.

Optimized computer-generated hologram for enhancing depth cue based on complex amplitude modulation

In this Letter, we introduce a computer-generated hologram (CGH) optimization method to enhance the depth cue based on complex amplitude modulation (CAM). An iterative algorithm is designed to generate the optimized random phase (ORAP) according to the size of the target image and the bandwidth limitation condition. The ORAP with limited bandwidth is used as the initial phase of the target image and the hologram is encoded based on the analytical formula. Our proposal can maintain the advantages of CAM and achieve holographic three-dimensional (3D) display with an enhanced depth cue. It is expected that the proposed method could be widely used in holographic field in the future.

Miniaturization and image optimization of a full-color holographic display system using a vibrating light guide

In this study, a miniaturized full-color holographic reconstruction system that uses a single spatial light modulator to achieve full-color image reconstruction was developed. The reconstruction system uses a single light guide for light combination and is therefore less voluminous than conventional reconstruction systems. The experimental results demonstrated that the system had a full-color display, corrected light combination, and eliminated zero-order light. The vibrations of the light guide disrupted the temporal coherence of the laser beam, thus ensuring that the speckle in the reconstructed image was almost imperceptible to the human eye.

Increased phase precision of spatial light modulators using irrational slopes: application to attosecond metrology

The ability of spatial light modulators (SLMs) to modify the amplitude and phase of light has proved them invaluable to the optics and photonics community. In many applications, the bit-depth of SLMs is a major limiting factor dictated by a digital processor. As a result, there is usually a compromise between refresh speed and bit-depth. Here, we present a method to increase the effective bit-depth of SLMs, which utilizes a linear slope, as is commonly applied to deal with the zeroth-order effect. This technique was tested using two interferometric transient absorption spectroscopy setups. Through the high harmonic generation in gases producing a train of attosecond pulses and harmonics from solids in the ultraviolet, two pulses are generated that interfere in the far field providing a measurement of the optical phase. An increase in the precision far beyond the limit dictated by the digital processor in the bit-depth was found.

Review of computer-generated hologram algorithms for color dynamic holographic three-dimensional display

Holographic three-dimensional display is an important display technique because it can provide all depth information of a real or virtual scene without any special eyewear. In recent years, with the development of computer and optoelectronic technology, computer-generated holograms have attracted extensive attention and developed as the most promising method to realize holographic display. However, some bottlenecks still restrict the development of computer-generated holograms, such as heavy computation burden, low image quality, and the complicated system of color holographic display. To overcome these problems, numerous algorithms have been investigated with the aim of color dynamic holographic three-dimensional display. In this review, we will explain the essence of various computer-generated hologram algorithms and provide some insights for future research.

Complex spatial light modulation capability of a dual layer in-plane switching liquid crystal panel

Complex spatial light modulator (SLM), which can simultaneously control the amplitude and phase of light waves, is a key technology for wide-range of wave-optic technologies including holographic three-dimensional displays. This paper presents a flat panel complex spatial light modulator that consists of dual in-plane switching liquid crystal panels with double-degrees of freedom of voltage inputs. The proposed architecture features single-pixel level complex light modulation enabling complex light modulation in entire free space, which is most contrast to conventional macro-pixel based complex modulation techniques. Its complex light modulation capability is verified with theoretical simulation and experimental characterization, and a three-dimensional holographic image reconstruction without conjugate noise. It is believed that the proposed flat panel complex SLM can be an essential device for a wide range of advanced wave optic technologies.

Arbitrary amplitude and phase control in visible by dielectric metasurface

Metasurfaces have been widely studied for arbitrary manipulation of the amplitude, phase and polarization of a field at the sub-wavelength scale. However, realizing a high efficiency metasurface with simultaneous and independent control of the amplitude and phase in visible remains a challenge. In this work, an ultrathin single-cell dielectric metasurface which can modulate arbitrary complex amplitude in transmission mode is proposed. The amplitude is controlled by adjusting the dipoles and quadrupoles by tuning the geometric size, while the phase is manipulated based on the Pancharatnam-Berry phase by rotating the meta-atom. Complex amplitude fields for generating holographic images and structure light are utilized to verify the reliability of the proposed structure. It has been experimentally demonstrated that the quality of holographic image of complex-amplitude hologram encoded on the proposed metasurface is better than that of phase-only holograms and verified by simulation that complex structure light can be generated by the proposed structure. Our work expands the superior limits of various applications, including arbitrary beam shaping, 3D biological imaging, optical computing, and optics-on-chip devices.

Efficient wavefront sensorless adaptive optics based on large dynamic crosstalk-free holographic modal wavefront sensing

The correction of wavefront sensorless adaptive optics (WFSless AO) can be significantly accelerated by using a holographic modal wavefront sensor (HMWFS). The HMWFS is realized by a computer-generated hologram (CGH) into which all aberration modes to be detected are encoded and only a single-shot image is required for simultaneous measurement of multiple modes. The conventional HMWFS suffers from a quite limited dynamic range and severe inter-modal crosstalk which deteriorates the sensing accuracy. We proposed a novel HMWFS with a large dynamic range and no crosstalk and validated its performance by simulation and experiment. In the improved HMWFS scheme, the aberration is represented by Lukosz modes whose gradients are orthogonal and the modal coefficients can be estimated independently. Instead of using a binary CGH in conventional HMWFS, a kinoform CGH with high diffraction efficiency is adopted in the improved HMWFS. The kinoform CGH is produced by a phase-only liquid-crystal spatial light modulator (LCSLM) which also serves as a wavefront corrector in our WFSless AO system.

Reducing Defocused-Information Crosstalk to Multi-View Holography by Using Multichannel Encryption of Random Phase Distribution

A new optical encryption algorithm, called the random-phase encryption algorithm, is proposed in this study. When this algorithm was applied in constructing computer-generated holograms, the out-of-focus image crosstalk was effectively reduced, and the image quality was greatly enhanced. In this study, the researchers encrypted each multi-depth or multi-view random phase sub-image with the phase-locked key to generate multi-channel encryption phase information. During the reconstruction, the switch of the phase-locked key of the sub-image was found to achieve different image reconstruction effects with different views or depths. This algorithm proved to substantially reduce the out-of-focus image crosstalk and to enhance the reconstruction quality of the original computer holography without concerning the mutual interference among the information of each view for multi-view and multi-depth holograms.

Speckleless color dynamic three-dimensional holographic display based on complex amplitude modulation

In this paper, we propose a method to implement a speckleless color dynamic three-dimensional holographic display by modulating amplitude and phase distribution simultaneously. Computer-generated holograms are calculated with an initial uniform phase, and the speckle noise of reconstructed images is suppressed effectively. We perform both numerical simulations and optical experiments to demonstrate the effectiveness of the proposed method. The numerical simulations show that the proposed method can achieve speckleless reconstruction and the optical experiments provide a good color dynamic display effect. It is expected that the proposed method could be widely applied to realize high-quality color dynamic holographic displays in the future.

A complex-amplitude hologram using an ultra-thin dielectric metasurface

Metasurfaces have been widely studied for the arbitrary manipulation of the amplitude, phase and polarization of a field at the subwavelength scale. Holographic images with a high resolution and a large viewing angle can be reconstructed from phase-only holograms encoded in a metasurface. The quality of a holographic image can be greatly improved by using complex-amplitude holograms. However, realizing a high efficiency metasurface with simultaneous and independent control of the amplitude and phase remains a great challenge. In this work, an ultrathin dielectric metasurface which can modulate the complex amplitude in the transmission mode is proposed for a metasurface hologram. The amplitude is controlled by adjusting the dipoles and quadrupoles by tuning the geometric size. The phase value from 0 to 2π is manipulated based on the Pancharatnam-Berry phase (also called the geometric phase) by rotating the meta-atom. The experimental results show that a three-dimensional image reconstructed from a complex-amplitude hologram presents better quality than that from a phase-only hologram. The proposed metasurface shows great potential for applications that require complex amplitude modulation.

Enlarging field of view by a two-step method in a near-eye 3D holographic display

The narrow field of view (FOV) has always been one of the most with limitations that drag the development of holographic three-dimensional (3D) near-eye display (NED). The complex amplitude modulation (CAM) technique is one way to realize holographic 3D display in real time with the advantage of high image quality. Previously, we applied the CAM technique on the design and integration of a compact colorful 3D-NED system. In this paper, a viewing angle enlarged CAM based 3D-NED system using a Abbe-Porter scheme and curved reflective structure is proposed. The viewing angle is increased in two steps. An Abbe-Porter filter system, composed of a lens and a grating, is used to enlarge the FOV for the first step and, meanwhile, realize complex amplitude modulation. A curved reflective structure is used to realize the FOV enlargement for the second step. Besides, the system retains the ability of colorful 3D display with high image quality. Optical experiments are performed, and the results show the system could present a 45.2° diagonal viewing angle. The system is able to present dynamic display as well. A compact prototype is fabricated and integrated for wearable and lightweight design.

Enhancing the Quality of Sampled Phase-Only Hologram (SPOH) Based on Time-Division Comb Filtering

Generation of digital phase-only Fresnel holograms is an important research area in digital holography, as it leads to a substantial simplification of a holographic display system. However, the quality of the reconstructed image of a hologram without the magnitude component is heavily degraded. The problem can be reduced by down-sampling the intensity of an image prior to generating the hologram. The method, referred to as “sampled phase-only hologram” (SPOH) generation, results in reconstructed images that are masked with the pattern of the down-sampling lattice. This paper reports a novel, low complexity method to alleviate this problem through the concept of comb filtering. Results reveal prominent enhancement on the reconstructed image of a SPOH.

Reducing Computational Complexity and Memory Usage of Iterative Hologram Optimization Using Scaled Diffraction

A complex amplitude hologram can reconstruct perfect light waves. However, as there are no spatial light modulators that are able to display complex amplitudes, we need to use amplitude, binary, or phase-only holograms. The images reconstructed from such holograms will deteriorate; to address this problem, iterative hologram optimization algorithms have been proposed. One of the iterative algorithms utilizes a blank area to help converge the optimization; however, the calculation time and memory usage involved increases. In this study, we propose to reduce the computational complexity and memory usage of the iterative optimization using scaled diffraction, which can calculate light propagation with different sampling pitches on a hologram plane and object plane. Scaled diffraction can introduce a virtual blank area without using physical memory. We further propose a combination of scaled diffraction-based optimization and conventional methods. The combination algorithm improves the quality of a reconstructed complex amplitude while accelerating optimization.

Improve the quality of holographic image with complex-amplitude metasurface

Complex-amplitude hologram can provide a high-quality image that is free of twin image and zero-order noise. Multi-SLMs methods, single SLM with space-division modulations and super pixel methods were striving to meet the requirements of complex amplitude modulation. In this work, we propose an ultra-thin dielectric metasurface to improve the quality of holographic image by loading complex amplitude hologram. This metasurface controls the amplitude and phase simultaneously and independently in transmission mode. The multipole expansion method is applied to analyze the mechanism. The polarization conversion efficiency can be up to 99% and the diffraction efficiency is 71%. The simulations verify that the quality of holographic image could be greatly improved by a complex-amplitude metasurface.

A full-color compact 3D see-through near-eye display system based on complex amplitude modulation

For complex amplitude modulation (CAM)-based three-dimensional (3D) near-eye systems, it is a challenge to realize colorful 3D display by using spatial light modulator (SLM) and grating. Here, a full-color compact 3D see-through near-eye display (NED) system by CAM is proposed. Computer generated holograms (CGHs) for different wavelengths are calculated separately. Each CGH contains two position-shifted sub-holograms and the separated distance is carefully calibrated to eliminate chromatic aberration. Colorful 3D images are synthesized through time-multiplexing. Color managements are performed and chromatic aberration of the system is analyzed to provide better colorful effect. The system structure is integrated to be compact and a prototype is implemented. Pre-compensation is added on CGHs to offset the system's assembling errors. Optical experiment results show that the proposed system can provide good 3D full-color see-through performance without vergence-accommodation conflict (VAC). Dynamic colorful display ability is also tested, which shows good potential for interactive NED in the future.

Color dynamic holographic display with wide viewing angle by improved complex amplitude modulation

An improved method of complex amplitude modulation (CAM) is proposed for color holographic display with a wide viewing angle. Bandlimited random initial phase is introduced to the CAM method, which overcomes the drawbacks brought by a constant initial phase and maintains the advantages of CAM. Modifications in CAM for color display are also explained. Both simulation and experimental results verify that the proposed method can reconstruct color 3D scenes successfully without the time-consuming process for encoding the computer-generated holograms. Compared with the display via traditional CAM, the results exhibit that the proposed method can reconstruct color 3D scenes with a better viewing effect. Because of the display effect improvement and the high calculation speed, this method can be applied to high performance holographic display.

Design and fabrication of DOEs on multi- freeform surfaces via complex amplitude modulation

A non-iterative design and precise fabrication method of diffractive optical elements (DOEs) on multiple freeform surfaces is proposed and investigated in this paper. Complex amplitude modulation (CAM) technology is applied to design complicated DOEs. The wave-front for desired DOEs fabrication is interfered with a plane wave and then be encoded to a pure phase hologram. Simulations for different DOEs (binary and gray scales) on freeform surfaces are performed and the relative errors are 0.56% and 0.78%, respectively. Since the reconstructed optical fields generated by spatial light modulator (SLM) can be recorded into light-sensitive materials (photopolymer), the DOEs fabrication is realized by optical exposure. The results show that the proposed method can design and fabricate DOEs on multi-freeform surfaces at one time with high quality. Since the CAM method ensures precise reconstruction without iterations, the fabrication is accurate as well as the design is fast. It is expected that the proposed method could be applied in the precise 3D optical fabrication and processing in the future.

Generation of patterned-phase-only holograms (PPOHs)

A fast and non-iterative method for generating a phase-only hologram, hereafter referred to as the patterned-phase-only hologram (PPOH), is reported in this paper. Briefly, a phase mask with a periodic phase pattern is added to the source image, and converted into a hologram. Subsequently, only the phase component is retained as a phase-only hologram. Experimental evaluation reveals that the visual quality of the reconstructed images of the PPOH generated with our proposed method is favorable, and superior to that obtained with existing methods.

Compact see-through 3D head-mounted display based on wavefront modulation with holographic grating filter

A compact see-through three-dimensional head-mounted display (3D-HMD) is proposed and investigated in this paper. Two phase holograms are analytically extracted from the object wavefront and uploaded on different zones of the spatial light modulator (SLM). A holographic grating is further used as the frequency filter to couple the separated holograms together for wavefront modulation. The developed preliminary prototype has a simple optical facility and a compact structure (133.8mm × 40.4mm × 35.4mm with a 47.7mm length viewing accessory). Optical experiments demonstrated that the proposed system can present 3D images to the human eye with full depth cues. Therefore, it is free of the accommodation-vergence conflict and visual fatigue problem. The dynamic display ability is also tested in the experiments, which provides a promising potential for the true 3D interactive display.

Characteristics of complex light modulation through an amplitude-phase double-layer spatial light modulator

The complex modulation characteristics of a light field through an amplitude-phase double-layer spatial light modulator are analyzed based on the wave-optic numerical model, and the structural conditions for the optimal double-layer complex modulation structure are investigated. The relationships of interlayer distance, pixel size, and complex light modulation performance are analyzed. The main finding of this study is that the optimal interlayer distance for the double-layer structure can be found at the Talbot effect condition. For validating the practical usefulness of our findings, a high quality reconstruction of the complex computer-generated holograms and the robustness of the angular tolerance of the complex modulation at the Talbot interlayer distance are numerically demonstrated.

Generation of complementary sampled phase-only holograms

If an image is uniformly down-sampled into a sparse form and converted into a hologram, the phase component alone will be adequate to reconstruct the image. However, the appearance of the reconstructed image is degraded with numerous empty holes. In this paper, we present a low complexity and non-iterative solution to this problem. Briefly, two phase-only holograms are generated for an image, each based on a different down-sampling lattice. Subsequently, the holograms are displayed alternately at high frame rate. The reconstructed images of the 2 holograms will appear to be a single, densely sampled image with enhance visual quality.

Monocular 3D see-through head-mounted display via complex amplitude modulation

The complex amplitude modulation (CAM) technique is applied to the design of the monocular three-dimensional see-through head-mounted display (3D-STHMD) for the first time. Two amplitude holograms are obtained by analytically dividing the wavefront of the 3D object to the real and the imaginary distributions, and then double amplitude-only spatial light modulators (A-SLMs) are employed to reconstruct the 3D images in real-time. Since the CAM technique can inherently present true 3D images to the human eye, the designed CAM-STHMD system avoids the accommodation-convergence conflict of the conventional stereoscopic see-through displays. The optical experiments further demonstrated that the proposed system has continuous and wide depth cues, which enables the observer free of eye fatigue problem. The dynamic display ability is also tested in the experiments and the results showed the possibility of true 3D interactive display.

Nonlinearity compensation and complex-to-phase conversion of complex incoherent digital holograms for optical reconstruction

Incoherent digital holography (IDH) can be realized by optical scanning holography or self-interference incoherent holography. Although IDH can exhibit high quality reconstruction due to its inherently speckle-free property, direct display of an incoherent hologram is a challenge because of its amplitude nonlinearity and the demand of complex modulation. In this paper we propose to compensate the amplitude nonlinearity at the object plane, and use bidirectional error-diffusion method to convert the complex-type incoherent Fresnel hologram to a phase-only Fresnel hologram for display. A spatial light modulator is used to reconstruct the phase-only hologram optically to demonstrate the validity of our proposed method.

Linear phase encoding for holographic data storage with a single phase-only spatial light modulator

A linear phase encoding is presented for realizing a compact and simple holographic data storage system with a single spatial light modulator (SLM). This encoding method makes it possible to modulate a complex amplitude distribution with a single phase-only SLM in a holographic storage system. In addition, an undesired light due to the imperfection of an SLM can be removed by spatial frequency filtering with a Nyquist aperture. The linear phase encoding is introduced to coaxial holographic data storage. The generation of a signal beam using linear phase encoding is experimentally verified in an interferometer. In a coaxial holographic data storage system, single data recording, shift selectivity, and shift multiplexed recording are experimentally demonstrated.

Generation of phase-only Fresnel hologram based on down-sampling

We present a novel non-iterative method for generating phase-only Fresnel holograms. The intensity image of the source object scene is first down-sampled with uniform grid-cross lattices. A Fresnel hologram is then generated from the intensity and the depth information of the sampled object points. Subsequently, only the phase component of the hologram is preserved, resulting in a pure phase hologram that we call the sampled-phase-only hologram (SPOH). Experimental evaluation reveals that the numerical, as well as the optical reconstructed images of the proposed phase-only hologram derived with our method are of high visual quality. Moreover, the reconstructed optical image is brighter, and less affected by phase noise contamination on the hologram as compared with those generated with existing error-diffusion approaches.

Speckle reduction by combination of digital filter and optical suppression in a modified Gerchberg-Saxton algorithm computer-generated hologram

A speckleless illuminated modified-Gerchberg-Saxton-algorithm-type computer-generated hologram, which adopts a lower frequency of the iterative algorithm and calculation time, is proposed to code a hologram with two signals and position a multiplexing phase-only function, which can reconstruct the left and the right viewing holograms on the pupillary-distance position after the decryption and still maintain the content with high contrast and definition. The reconstructed image quality presents root mean square error of 0.03, with a diffraction efficiency of 87%, and signal-to-noise ratio of 8 dB after the analysis. Furthermore, two denoising techniques for the digital filter and optical suppression are combined, in which the speckle suppression with pseudorandom phase modulation and a rotating diffuser are utilized for successfully reducing the speckle contrast, which was reduced to below 4%. The goal was to reduce visual fatigue for the viewers.

Spatial bandwidth analysis of fast backward Fresnel diffraction for precise computer-generated hologram design

Designing near-field computer-generated holograms (CGHs) for a spatial light modulator (SLM) requires backward diffraction calculations. However, direct implementation of the discrete computational model of the Fresnel diffraction integral often produces inaccurate reconstruction. Finite sizes of the SLM and the target image, as well as aliasing, are major sources of error. Here we present a new design prescription for precise near-field CGHs based on comprehensive analysis of the spatial bandwidth. We demonstrate that, by controlling two free variables related to the target image, the designed hologram is free from aliasing and can have minimum error. To achieve this, we analyze the geometry of the target image, hologram, and Fourier transform plane of the target image to derive conditions for minimizing reconstruction error due to truncation of spatial frequencies lying outside of the hologram. The design prescription is verified by examples showing reconstruction error versus controlled parameters. Finally, it is applied to precise three-dimensional image reconstruction.

Modulation efficiency of double-phase hologram complex light modulation macro-pixels

The modulation efficiency of the double-phase hologram macro-pixel that is designed for complex modulation of light waves is defined and analyzed. The scale-down of the double-phase hologram macro-pixel associated with the construction of complex spatial light modulators is discussed.

Encoding complex fields by using a phase-only optical element

We show that the amplitude and phase information from a two-dimensional complex field can be synthesized from a phase-only optical element with micrometric resolution. The principle of the method is based on the combination of two spatially sampled phase elements by using a low-pass filter at the Fourier plane of a 4-f optical system. The proposed encoding technique was theoretically demonstrated, as well as experimentally validated with the help of a phase-only spatial light modulator for phase encoding, a conventional CMOS camera to measure the amplitude of the complex field, and a Shack-Hartmann wavefront sensor to determine its phase.

Fast conversion of digital Fresnel hologram to phase-only hologram based on localized error diffusion and redistribution

Past research has demonstrated that a digital, complex Fresnel hologram can be converted into a phase-only hologram with the use of the bi-direction error diffusion (BERD) algorithm. However, the recursive nature error diffusion process is lengthy and increases monotonically with hologram size. In this paper, we propose a method to overcome this problem. Briefly, each row of a hologram is partitioned into short non-overlapping segments, and a localized error diffusion algorithm is applied to convert the pixels in each segment into phase only values. Subsequently, the error signal is redistributed with low-pass filtering. As the operation on each segment is independent of others, the conversion process can be conducted at high speed with the graphic processing unit. The hologram obtained with the proposed method, known as the Localized Error Diffusion and Redistribution (LERDR) hologram, is over two orders of magnitude faster than that obtained by BERD for a 2048×2048 hologram, exceeding the capability of generating quality phase-only holograms in video rate.

Novel method for converting digital Fresnel hologram to phase-only hologram based on bidirectional error diffusion

We report a novel and fast method for converting a digital, complex Fresnel hologram into a phase-only hologram. Briefly, the pixels in the complex hologram are scanned sequentially in a row by row manner. The odd and even rows are scanned from opposite directions, constituting to a bidirectional error diffusion process. The magnitude of each visited pixel is forced to be a constant value, while preserving the exact phase value. The resulting error is diffused to the neighboring pixels that have not been visited before. The resulting novel phase-only hologram is called the bidirectional error diffusion (BERD) hologram. The reconstructed image from the BERD hologram exhibits high fidelity as compared with those obtained with the original complex hologram.

3D dynamic holographic display by modulating complex amplitude experimentally

Complex amplitude modulation method is presented theoretically and performed experimentally for three-dimensional (3D) dynamic holographic display with reduced speckle using a single phase-only spatial light modulator. The determination of essential factors is discussed based on the basic principle and theory. The numerical simulations and optical experiments are performed, where the static and animated objects without refinement on the surfaces and without random initial phases are reconstructed successfully. The results indicate that this method can reduce the speckle in reconstructed images effectively; furthermore, it will not cause the internal structure in the reconstructed pixels. Since the complex amplitude modulation is based on the principle of phase-only hologram, it does not need the stringent alignment of pixels. This method can be used for high resolution imaging or measurement in various optical areas.

Speckle-free digital holographic recording of a diffusely reflecting object

We demonstrate holographic recording without speckle noise using the digital holographic technique called optical scanning holography (OSH). First, we record a complex hologram of a diffusely reflecting (DR) object using OSH. The incoherent mode of OSH makes it possible to record the complex hologram without speckle noise. Second, we convert the complex hologram to an off-axis real hologram digitally and finally we reconstruct the real hologram using an amplitude-only spatial light modulator (SLM) without twin-image noise and speckle noise. To the best of our knowledge, this is the first time demonstrating digital holographic recording of a DR object without speckle noise.

Optimal synthesis of double-phase computer generated holograms using a phase-only spatial light modulator with grating filter

We propose an optical system for synthesizing double-phase complex computer-generated holograms using a phase-only spatial light modulator and a phase grating filter. Two separated areas of the phase-only spatial light modulator are optically superposed by 4-f configuration with an optimally designed grating filter to synthesize arbitrary complex optical field distributions. The tolerances related to misalignment factors are analyzed, and the optimal synthesis method of double-phase computer-generated holograms is described.

Vertical-bandwidth-limited digital holography

Optical scanning holography (OSH) is a promising technique to acquire a big-size digital hologram. However, the acquisition speed is limited by the mechanical scanner. In this Letter we apply the OSH in conjunction with an anisotropic low-pass filtering pupil to acquire vertical-bandwidth-limited (VBL) holograms. The size and the acquisition time of the VBL hologram can be reduced by one order of magnitude while the horizontal resolution remains the same as the conventional scanning hologram. The VBL hologram can be coded as an off-axis hologram without any postfiltering. Meanwhile, the full horizontal bandwidth of the displaying device can be capitalized.