Polarization independent blue-phase liquid crystal cylindrical lens with a resistive film

Fast response electrically controlled liquid crystal lens array for high resolution 2D/3D switchable display

A fast response electrically controlled liquid crystal (LC) lens array is revealed. In order to realize the fast response, a double LC layer structure is adopted. The fabricated LC lens array has a small pitch of 310µm and LC layer with a thickness of 50μm. Experimental results show that the focal length of the LC lens array can be continuously adjusted by low driving voltage (∼6.5V_rms), and the shortest focal length is 0.5mm. The switching between 2D display and 3D display is realized by controlling the voltage off and on state of the LC lens array. Experimental result shows that the 2D/3D switchable display has a fast response time of 16ms. The short pitch LC lens array is expected to be used in high-resolution 2D/3D switchable display.

Switchable 2D/3D display based on a liquid crystal lens array and the rotating specimen shooting method

A liquid crystal (LC) lenticular lens array with auxiliary electrodes is proposed. The introduction of the auxiliary electrodes helps to obtain an LC lens array (LCLA) with relatively large aperture without complex structures. When the LCLA is in the focusing state, the voltage of auxiliary electrodes is less than that of edge electrodes, and the generated electric field in the LCLA can penetrate into the LC layer. Therefore, the ideal phase profile is obtained with a relatively thin LC layer thickness. Experimental results show that the LCLA has the characteristics of high optical power and low operation voltage. Based on the proposed LCLA, a multi-view 2D/3D switchable display is realized. In the experiment, a series of parallax images is obtained by rotating the sample to replace the convergence shooting method for 3D imaging. Compared with other 2D/3D switchable display devices, the multi-view 2D/3D switchable display based on the LCLA is characterized by being thin and compact, and displaying no moiré pattern.

Biomimetic models of the human eye, and their applications

Replicating the functionality of the human eye has been a challenge for more than a century, creating a great wealth of biomimetic and bioinspired devices, and providing ever improving models of the eye for myriad research purposes. As improvements in microelectronics have proceeded, individual components of the eye have been replicated, and models of the optical behaviour of the eye have improved. This review explores both work developed for improving medical components, with an ultimate aim of a fully functioning prosthetic eye, and work looking at improving existing devices through biomimetic means. It is hoped that this holistic approach to the subject will aid in the cross pollination of ideas between the two research foci. The review starts by summarising the reported measurements of optical parameters of various components of the eye. It then charts the development of individual bionic components. Particular focus is put on the development of bionic and biomimetic forms of the two main adaptive components of the eye, namely the lens and the iris, and the challenges faced in modelling the light sensitive retina. Work on each of these components is thoroughly reviewed, including an overview of the principles behind the many different approaches used to mimic the functionality, and discussion of the pros and cons of each approach. This is concluded by an overview of several reported models of the complete or semi-complete eye, including details of the components used and a summary of the models' functionality. Finally, some consideration is given to the direction of travel of this field of research, and which existing approaches are likely to bring us closer to the long term goal of a fully functional analogue of the eye.

Fast refocusing lens based on ferroelectric liquid crystals

Optical devices like virtual reality (VR) headsets present challenges in terms of vergence-accommodation conflict that leads to visual fatigue for the user over time. Lenses available to meet these challenges include liquid crystal (LC) lenses, which possess a response time in the millisecond range. This response time is slow, while accessing multiple focal lengths. A ferroelectric liquid crystal (FLC) has a response time in the microsecond range. In this article, we disclose a switchable lens device having a combination of the fast FLC-based polarization rotation unit and a passive polarization-dependent LC lens. A cascaded combination of three such lens units allows access to eight different focal points quite rapidly and can be a convenient device for VR applications.

Electrically-Tunable Blue Phase Liquid Crystal Microlens Array Based on a Photoconductive Film

This paper proposes an effective approach to fabricate a blue phase liquid crystal (BPLC) microlens array based on a photoconductive film. Owing to the characteristics of photo-induced conducting polymer polyvinylcarbazole (PVK), in which conductivity depends on the irradiation of UV light, a progressive mask resulting in the variation of conductivity is adopted to produce the gradient distribution of the electric field. The reorientations of liquid crystals according to the gradient distribution of the electric field induce the variation of the refractive index. Thus, the incident light experiences the gradient distribution of the refractive index and results in the focusing phenomenon. The study investigates the dependence of lens performance on UV exposure time, the focal length of the lens, and focusing intensities with various incident polarizations. The BPLC microlens array exhibits advantages such as electrically tunability, polarization independence, and fast response time.

Accommodation-Free Head Mounted Display with Comfortable 3D Perception and an Enlarged Eye-box

An accommodation-free displays, also known as Maxwellian displays, keep the displayed image sharp regardless of the viewer's focal distance. However, they typically suffer from a small eye-box and limited effective field of view (FOV) which requires careful alignment before a viewer can see the image. This paper presents a high-quality accommodation-free head mounted display (aHMD) based on pixel beam scanning for direct image forming on retina. It has an enlarged eye-box and FOV for easy viewing by replicating the viewing points with an array of beam splitters. A prototype aHMD is built using this concept, which shows high definition, low colour aberration 3D augmented reality (AR) images with an FOV of 36°. The advantage of the proposed design over other head mounted display (HMD) architectures is that, due to the narrow, collimated pixel beams, the high image quality is unaffected by changes in eye accommodation, and the approach to enlarge the eye-box is scalable. Most importantly, such an aHMD can deliver realistic three-dimensional (3D) viewing perception with no vergence-accommodation conflict (VAC). It is found that viewing the accommodation-free 3D images with the aHMD presented in this work is comfortable for viewers and does not cause the nausea or eyestrain side effects commonly associated with conventional stereoscopic 3D or HMD displays, even for all day use.

Electrically Tunable-Focusing Liquid Crystal Microlens Array with Simple Electrode

An electrically tunable-focusing liquid crystal (LC) microlens array exhibiting a wide-range tunable focal length is proposed. The lower substrate has strip indium tin oxide (ITO) electrodes, the upper substrate has periodic ITO electrodes with a certain gap coated on the inner surface., and an LC microlens is generated between the two strip electrodes. For each LC microlens, the gap between the top planar electrodes is directly above the center of the microlens. Unlike the conventional LC lens, the individual LC microlens is not coated with ITO electrodes on the central part of its upper and lower substrates, which helps to maintain the LC’s horizontal orientation. In the voltage-off state, the focal length of the microlens array is infinity because of the homogeneous LC alignment. At a given operating voltage, an ideal gradient refractive index distribution is induced over the homogeneous LC layer, which leads to the focusing effect. The simulation result shows that the focal length of the LC microlens could be gradually drawn to 0.381 mm with a change of voltage.

Optical properties of cubic blue phase liquid crystal in photonic microstructures

In this work, optical properties of a cubic blue phase liquid crystal (BPLC) in photonic microstructures were investigated. The experiments were carried out in microcapillaries with different inner diameters and in a photonic crystal fiber (PCF). For the first time, white-light beam propagation through a BPLC (BP II) in a microcapillary with a 60-μm inner diameter at a distance of 26 mm was demonstrated. Furthermore, it was conclusively shown that the cylindrical geometry and the size of its inner diameter influence BP domains orientation, which can lead to a uniform texture of the BPLC with a dominant Bragg wavelength. This study also proves that a BPLC-filled PCF provides very attractive tunable properties. It was presented that by applying an external electric field, a control of the transmitted light intensity for particular wavelengths can be achieved, depending on the input polarization. Moreover, a range of the wavelengths corresponding to low transmission appeared to be tunable, whereas for x- and y-polarized light, respectively, both narrowing (from 16 nm to 9 nm) as well widening (from 13 nm to 22 nm) of the bandgaps were observed. Finally, the obtained experimental results were found qualitatively consistent.

Ferroelectric thin films with liquid crystal for gradient index applications

We report on the first ever combination of a thin film of lead zirconate titanate (PZT) with a liquid crystal (LC) layer. Many liquid crystal applications use a transparent conductive oxide to switch the liquid crystal. Our proposed processing does not, instead relying on the extremely high dielectric constant of the ferroelectric layer to extend the electric field from widely spaced electrodes over the liquid crystal. It eliminates almost entirely the fringe field problems that arise in nearly all the liquid crystal devices that use multiple addressing electrodes. We show, both via rigorous simulations as well as experiments, that the addition of a PZT layer over the addressing electrodes leads to a markedly improved LC switching performance at distances of up to 30 μm from the addressing electrodes with the current PZT-layer thickness of 0.84 μm. This improvement in switching is used to tune the focal length of the microlens with electrodes spaced at 30 μm.

Dual layer electrode liquid crystal lens for 2D/3D tunable endoscopy imaging system

In this paper, we demonstrate a multi-functional liquid-crystal lens (MFLC-lens) based on dual-layer electrode design. Compared with the previous 3D endoscopes, which use double fixed lens capturing, the proposed LC lens is not only switchable between 2D and 3D modes, but also is able to adjust focus in both modes. The diameter of the MFLC-lens is only 1.42mm, which is much smaller than the available 3D endoscopes with double fixed lenses. To achieve the MFLC-lens, a high-resistance layer needs to be coated on the electrode to generate an ideal gradient electric-field distribution, which can induce a lens-like form of LC molecules. The parameters of high-resistive layer are investigated and discussed with an aim to optimize the performance of the MFLC-lens.

Field-induced refractive index variation in the dark conglomerate phase for polarization-independent switchable liquid crystal lenses

Liquid crystal lenses are an emerging technology that can provide variable focal power in response to applied voltage. Many designs for liquid-crystal-based lenses are polarization dependent, so that 50% of light is not focused as required, making polarization-independent technologies very attractive. Recently, the dark conglomerate (DC) phase, which is an optically isotropic liquid crystalline state, has been shown to exhibit a large change in refractive index in response to an applied electric field (Δn=0.04). This paper describes computational modeling of the electrostatic solutions for two different types of 100 μm diameter liquid crystal lenses, which include the DC phase, demonstrating that it shows great potential for efficient isotropic optical switching in lenses. A feature of the field dependence of the refractive index change in the DC phase is that it is approximately linear in a certain range, leading to the prediction of excellent optical quality for driving fields in this regime. Interestingly, a simulated microlens is shown to exhibit two modes of operation: a positive lens based upon a uniform bulk change in refractive index at high voltages, and a negative lens resulting from the induction of a gradient index effect at intermediate voltages.

A novel high-sensitivity, low-power, liquid crystal temperature sensor

A novel temperature sensor based on nematic liquid crystal permittivity as a sensing magnitude, is presented. This sensor consists of a specific micrometric structure that gives considerable advantages from other previous related liquid crystal (LC) sensors. The analytical study reveals that permittivity change with temperature is introduced in a hyperbolic cosine function, increasing the sensitivity term considerably. The experimental data has been obtained for ranges from −6 °C to 100 °C. Despite this, following the LC datasheet, theoretical ranges from −40 °C to 109 °C could be achieved. These results have revealed maximum sensitivities of 33 mV_rms/°C for certain temperature ranges; three times more than of most silicon temperature sensors. As it was predicted by the analytical study, the micrometric size of the proposed structure produces a high output voltage. Moreover the voltage's sensitivity to temperature response can be controlled by the applied voltage. This response allows temperature measurements to be carried out without any amplification or conditioning circuitry, with very low power consumption.

Speed, optical power, and off-axis imaging improvement of refractive liquid crystal lenses

Two design approaches (multicell and addition of phase resets in single cell) are introduced to optimize the performances of tunable refractive liquid crystal lenses, including improvements on the switching speed, optical power, and the off-axis, wide-angle imaging performance. Key parameters and advantages for each method are discussed, and their effects on the performance are demonstrated in detail with numerical calculations.

Effect of anisotropic MoS2 nanoparticles on the blue phase range of a chiral liquid crystal

Liquid-crystalline blue phases are attracting significant interest due to their potential for applications related to tunable photonic crystals and fast optical displays. In this work a brief theoretical model is presented accounting for the impact of anisotropic nanoparticles on the blue phase stability region. This model is tested by means of high-resolution calorimetric and optical measurements of the effect of anisotropic, surface-functionalized MoS2 nanoparticles on the blue phase range of a chiral liquid crystal. The addition of these nanoparticles effectively increases the temperature range of blue phases and especially the cubic structure of blue phase I.

Polarization-independent adaptive lens with two different blue-phase liquid-crystal layers

An adaptive microlens structure is proposed using two polymer-stabilized blue-phase liquid-crystal layers whose Kerr constant is largely mismatched. This device exhibits several favorable features, such as polarization independence, simple structure, and good parabolic phase profile. Its applications for 2D/3D switchable displays and other photonic devices are emphasized.

Near-diffraction-limited and low-haze electro-optical tunable liquid crystal lens with floating electrodes

A near-diffraction-limited, low-haze and tunable liquid crystal (LC) lens is presented. Building on an understanding of the key factors that have limited the performance of lenses based on liquid crystals, we show a simple design whose optical quality is similar to a high quality glass lens. It uses 'floating' electrodes to provide a smooth, controllable applied potential profile across the aperture to manage the phase profile.

Focus tuning by liquid crystal lens in imaging system

A quantitative study of the focus tuning by a liquid crystal lens in an imaging system composed of a camera module and the liquid crystal lens that performs the focusing function is reported. The resolving capability of the imaging system is investigated by analyzing the image of an ISO12233 chart formed by the system. Measurements show that with the focus tuning by the liquid crystal lens, the resolving power of the system can be very close to that of the camera module.

Three-dimensional imaging with axially distributed sensing using electronically controlled liquid crystal lens

In this Letter, we present a three-dimensional (3D) imaging system with axially distributed sensing (ADS) using an electronically controlled liquid crystal (LC) lens. The proposed system performed an optical image acquisition by varying the focal lengths of the LC lens without mechanical movements of an image sensor. Multiple images with slightly different perspectives were experimentally recorded, and the 3D images were reconstructed according to the ray backprojection algorithm. To the best of our knowledge, this is the first report on 3D ADS using a LC lens. The proposed system is attractive for compact 3D sensing camera systems.