Intraocular lens based on double-liquid variable-focus lens

Artificial accommodating intraocular lens powered by an ion polymer-metal composite actuator

The current method of controlling the focus of an accommodating intraocular lens is based on ciliary muscle contraction and cannot be used in older patients with presbyopia. We aimed to develop a dynamically accommodating intraocular lens powered by a membrane-shaped ion polymer metal composite actuator that is thin enough to be inserted in the eye. This study addresses two key problems identified in our previous accommodating intraocular lens prototype: the lack of repeatability due to the use of swine lenses instead of artificial lenses and the occurrence of a sixth order aberration. Thus, we present a new accommodating intraocular lens design and a method to transfer energy to actuators. To accommodate lens deformation and depth of focus, we used a membrane-shaped ion polymer metal composite actuator, thin enough to be inserted in the eye, and used an artificial silicone lens. To prevent the sixth order aberration, we included a ring between the ion polymer metal composite actuator and the lens. Different voltage patterns were applied to the IPMC actuator and changes in focus were observed. We were able to obtain repeatability and prevent the sixth order aberration. The dioptric power changed to ±0.23 D when ±1.5 V was used; however, at >1.5 V, a large accommodating range occurred, in addition to astigmatic vision. Thus, we have developed a novel prototype that is completely artificial, allowing reproducible and repeatable results. Visual accommodative demands were successfully met; however, although astigmatic vision was lessened, it was not completely eradicated.

Optimized multielement accommodative intraocular lens with a four-freeform-surface Alvarez lens and a separate aspheric lens

This paper proposes an accommodative intraocular lens (IOL), which consists of a two-element Alvarez lens and an aspheric lens for changing focal power and refractive power, respectively. The four-freeform-surface Alvarez lens is optimized for a multiple field of view; further, the aspheric lens also corrects the aberrations induced by the corneal asphericity of the human eye over the whole range of accommodation. A simulation using optical design software demonstrates its excellent performance in that the values of the modulation transfer function at 100 cycles/mm all reach ∼0.4 with a ±5° field of view for 3 and 5 mm pupils.

Voltage-controlled accommodating IOL system using an ion polymer metal composite actuator

Surgeons treat cataracts by replacing the clouded lens with an intraocular lens (IOL), but patients are required to wear reading glasses for tasks requiring near vision. We suggest a new voltage-controlled accommodating IOL made of an ionic polymer metal composite (IPMC) actuator to change focus. An in vitro experiment was conducted where an actuator was placed inside the eye and moved with applied voltage. The lens attached to the actuator was deformed by its movement to change the patient's focus. The results showed that this system can accommodate a change of approximately 0.8 diopters under an applied voltage of ± 1.3 V.