Predictive capability of average Stokes polarimetry for simulation of phase multilevel elements onto LCoS devices

Effects of phase flicker in digitally driven phase-only LCOS devices on holographic reconstructed images

Phase flicker can degrade the performance of holographic applications at the device and application levels. On the device side, the meaningful phase modulation resolution is proved to be limited by the overlapping between adjacent phase levels caused by flicker. Here, the tolerance of the overlapping for different modulation levels is provided. The frame rate of the device is also constrained by the phase flicker. The balance between low flicker and fast LC response for fast frame rate is quantitatively analyzed. On the application side, the effects of real phase flicker on the performance of blazed gratings and image holograms are investigated using the temporal phase flicker profiles measured from a phase-only liquid crystal on silicon (LCOS) device; they are shown to be comparable with that introduced by quantization level and amplitude noise, respectively.

Beyond the display: phase-only liquid crystal on Silicon devices and their applications in photonics [Invited]

Existing for almost four decades, liquid crystal on Silicon (LCOS) technology is rapidly growing into photonic applications. We review the basics of the technology, from the wafer to the driving solutions, the progress over the last decade and the future outlook. Furthermore we review the most exciting industrial and scientific applications of the LCOS technology.

Combining average molecular tilt and flicker for management of depolarized light in parallel-aligned liquid crystal devices for broadband and wide-angle illumination

We demonstrate a complete semiphysical and analytical model describing the angular and wavelength dependencies not only of retardance, but also its flicker, in parallel aligned liquid crystal (PA-LC) devices. It relies on the fitting of the molecules' equivalent tilt angle as a function of applied voltage. The wide range of calculations it offers without requiring extensive characterization makes the model unique. We focus on PA-LCoS application as a polarization state generator across the visible spectrum and for a wide range of incidence angles. This approach offers novel capabilities for managing arbitrary states of both full and partial polarization. To highlight the richness of situations with PA-LCoS devices, we provide results for two different digital addressing sequences producing different levels of flicker.

Simplified physical modeling of parallel-aligned liquid crystal devices at highly non-linear tilt angle profiles

In recent works, we demonstrated the accuracy and physical relevance of a highly simplified reverse-engineering analytical model for a parallel-aligned liquid crystal on silicon devices (PA-LCoS). Both experimental measurements and computational simulations applying the rigorous split-field finite difference time domain (SF-FDTD) technique led to this conclusion in the low applied voltages range. In this paper, we develop a complete rigorous validation covering the full range of possible applied voltages, including highly non-linear liquid crystal (LC) tilt angle profiles. We demonstrate the applicability of the model for spectral and angular retardation calculations, of interest in spatial light modulation applications. We also show that our analytical model enables the calculation of the retardance for novel PA-LC devices as a function of the LC compound and cell gap, becoming an appealing alternative to the usual numerical approaches for PA-LC devices design.

Blazed Gratings Recorded in Absorbent Photopolymers

Phase diffractive optical elements, which have many interesting applications, are usually fabricated using a photoresist. In this paper, they were made using a hybrid optic-digital system and a photopolymer as recording medium. We analyzed the characteristics of the input and recording light and then simulated the generation of blazed gratings with different spatial periods in different types of photopolymers using a diffusion model. Finally, we analyzed the output and diffraction efficiencies of the 0 and 1st order so as to compare the simulated values with those measured experimentally. We evaluated the effects of index matching in a standard PVA/AA photopolymer, and in a variation of Biophotopol, a more biocompatible photopolymer. Diffraction efficiencies near 70%, for a wavelength of 633 nm, were achieved for periods longer than 300 µm in this kind of materials.

Diffractive lenses recorded in absorbent photopolymers

Photopolymers can be appealing materials for diffractive optical elements fabrication. In this paper, we present the recording of diffractive lenses in PVA/AA (Polyvinyl alcohol acrylamide) based photopolymers using a liquid crystal device as a master. In addition, we study the viability of using a diffusion model to simulate the lens formation in the material and to study the influence of the different parameters that govern the diffractive formation in photopolymers. Once we control the influence of each parameter, we can fit an optimum recording schedule to record each different diffractive optical element with the optimum focalization power.

Exploring binary and ternary modulations on a PA-LCoS device for holographic data storage in a PVA/AA photopolymer

We focus on the novelty of three elements in holographic data storage systems (HDSS): the data pager, where we introduce a parallel-aligned liquid crystal on silicon (PA-LCoS) microdisplay; the recording material, where we consider the highly versatile PVA/AA photopolymer; and also in the architecture of the object arm, where a convergent correlator system is introduced. We show that PA-LCoS devices cannot implement pure hybrid-ternary modulated (HTM) data pages but a rather close approximation. Validation of the HDSS expressions for the convergent correlator and comparison with the widespread 4-f system is performed. Experimental results with PVA/AA material showing bit-error rates (BER) in the range of 10^-3, further show its potential application for HDSS, and also demonstrate the validity of the testing platform and PA-LCoS calibration and optimization.