Crosstalk-free dual-view liquid crystal display using patterned E-type polarizer

Wide-Field-of-View Near-Eye Display with Dual-Channel Waveguide

We propose a wide-field-of-view near-eye display featuring a dual-channel waveguide with cholesteric liquid crystal gratings. Our dual-channel waveguide is capable of splitting the field of view through the orthogonal polarization division multiplexing. To explain its mechanism, a diagram of k-domain, which factors into both the waveguide size and the number of pupils, is depicted. Our results demonstrate that the diagonal field of view reaches up to 80°, eye relief is 10 mm, exit pupil is 4 × 3 mm2, and uniformity is 79%.

See-Through Near-Eye Display with Built-in Prescription and Two-Dimensional Exit Pupil Expansion

We propose a see-through near-eye display featuring an exit pupil expander (EPE), which is composed of two multiplexed slanted gratings. Via a two-dimensional expansion, the exit pupil (EP) is able to be enlarged up to 10 × 8 mm2. Besides, the prescription for correcting the refractive errors can be integrated as well. The design rules are set forth in detail, followed by the results and discussion regarding the efficiency, field of view (FOV), exit pupil, angular resolution (AR), modulation transfer function (MTF), contrast ratio (CR), distortion, and simulated imaging.

Dual-view holographic three-dimensional display using a single spatial light modulator and a directional light-guide plate composed of pixelated gratings

In this paper, a dual-view holographic three-dimensional (3D) display using a single spatial light modulator (SLM) and a directional light-guide plate (DLGP) is proposed and implemented. The SLM is used to load the phase-only hologram calculated from two different 3D scenes for optical holographic reconstruction, and the DLGP composed of pixelated gratings with different periods and orientation angles is employed to guide the reconstructed images into two completely separated viewing zones, where different reconstructed perspectives in each viewing zone will form a stereoscopic 3D image. Furthermore, an experimental verification system for the proposed dual-view holographic 3D display is constructed, and the experimental results demonstrate that the proposed system can successfully present different 3D images in the left and right viewing zones simultaneously, verifying the feasibility of the proposed dual-view holographic 3D display.

Electro-Optical Effects of a Color Polymer-Dispersed Liquid Crystal Device by Micro-Encapsulation with a Pigment-Doped Shell

Polymer-dispersed liquid crystals (PDLCs) refer to nematic liquid crystals, which are embedded in a polymer matrix. A conventional PDLC device is fabricated by phase separation. However, this method leads to non-uniform electro-optical characteristics of the device due to the non-uniform size distribution of the liquid crystal droplets. Moreover, the PDLC device is switched between the transparent state and the scattering state so that a full color scheme is intrinsically impossible without a color filter. In this paper, a fabrication method for a color PDLC device with uniform size and shape for liquid crystal droplets is proposed. Droplets of a fairly uniform size in large quantities can be obtained by means of membrane emulsification. Microcapsules are fabricated by complex coacervation with gelatin and gum arabic. By adding red, green, and blue pigments, color microcapsules are obtained. The electro-optical effects of the fabricated color PDLC devices are also demonstrated. The driving voltage of the device is 90 V, and the switching time is 8.3 ms. In the turn-on state, the measured hazes of red, green, and blue PDLC devices are 16.89%, 15.82%, and 18.55%, respectively, while in the turn-off state, the measured hazes of those devices are 65.21%, 67.32%, and 70.76%, respectively.